Xiaomi TV remote control does not work

Updates problem

Some firmware versions are characterized by serious problems in integrating the remote control with individual gadgets. In February 2020, users began to notice the following:

  • Everything freezes on startup.
  • After a while, the peel Mi remote error appears.
  • The process stops.

A simple way to solve the problem: clear the program cache, try to connect. If it doesn’t help, then reinstall both the widget and the management utility. The fact is that 2 components are related to each other, and reinstalling one will definitely not solve the problem. Therefore, you need:

  • Clear cache for Peel widget.
  • Clear Mi Remote Data.
  • Check functionality.

If it doesn’t work, then both components are reinstalled, not one. After that, you will need to re-configure the integration with the device. This method fixes 99% of problems.

  • Site Map
  • Repair of devices
  • Question answer
  • Press releases

Microcracks of the screen are fraught with a break in the power circuit. If this happens, then you will have to change the screen. Fortunately, in China, they are several times cheaper.

A map with problems can be repaired by restoring broken clusters using a PC.

If shaken, a poorly positioned plug from the display may fall out. What will entail the disconnection of the image transmission module, or partial disconnection.

Remove the cover of the device, and plug the ribbon cable into the socket. If it is inserted, take it out and insert it. In this case, do not forget to disconnect the power cable from the battery.

When the quality of the pixels is determined, and among them it was possible to find “burnt out”, you can start looking for applications that will correct the situation:

  • JScreenFix is ​​easy to use, you need to use the Fix Stuck Pixels button to get started. The developer promises 30 minutes to complete this operation, but the service center masters recommend leaving the devices. Not less than 10-12 hours for a more complete check;
  • Pixel Fixer: Another program similar to JScreenFix. To restore pixels, you also need to click on the green button;
  • Dead Pixel Treatment: The platform does more than test a mobile phone for dead pixels. And then “heals” them, but at the same time reveals other defects in the display.

Mi remote Xiaomi does not work.

Even by 2019, individual tablets, phones, and other Xiaomi products were not released with infrared ports. Which called into question the ability to control with remotes. The old gadgets of certain lines were still controlled via the infrared port:

  • Mi.
  • Redmi.
  • Selected Note Models.

The MIUI shell already has a preinstalled Remote utility that allows you to control almost any equipment. However, if there is no program, then it will have to be downloaded additionally. If you cannot connect the TV (for example), then try disabling additional communication channels (Wi-Fi).

Mi remote Xiaomi does not work. Problem solving

Mi remote Xiaomi does not work, we will consider all possible problems and their solutions.

What users write:

  • What to do if an error is written when I press the TV on the remote.
  • Mi remote Xiaomi does not work after updating, help to solve the problem.
  • Does anyone know how to add to the list of devices?
  • Now I can control an old LG CRT, Viasat tuner, Microlab Solo 5C speakers and an old Olympus camera. Most versatile app.
  • The TV does not respond to the Xiaomi remote control, what to do?

Missing app

To work with the controller, you will have to install the program through the Play Market. For this:

xiaomi, remote, control, does, work
  • Launching the market application.
  • Enter the name Remote.
  • Download and install.

After that, you need to configure the application through the button. By clicking it, you can add a device. The program already contains an aLGorithm for connecting to the remote control.

If all else fails, try to find a similar configuration and do it all over again. Not all household appliances are supported by the utility.

Actions how to act in such a situation

Changing graphics to low resolution will help. You want to limit the power consumption mode. Do not continue to play when the phone charger is on. Remove the phone from the case, allow general ventilation of the case. Disconnect the phone, remove the battery.

If the smartphone has been in a damp room or has been exposed to moisture. This is especially true for the USB input, and leakage into the smartphone. Oxides can lead to current leakage, which can heat up the machine. To fix, you need to clean the USB. Take a thin stick and wrap a cotton swab around it. Dip it in white spirit or alcohol, and wipe the contacts at the entrance.

If water gets inside, then you need to disassemble Meizu. And, carry out the same operation with the contacts that are attached to the board. But, before doing this, disconnect the battery cable to avoid short circuits.

If the microphone does not work for Meizu M8, for this you need to do the following:.

Open the security settings, look for root access and press accept, restart the device. Open the “phone” and enter this combination ### or ###. Scroll to the right and find “Hardware Testing”. audio. Audio Playback set the Heaset PGA value to 160. Exit the menu and restart the phone.

[FIXED] Mi TV Remote Power Key Not Working Issue | हिंदी


Also, programmatic methods can be applied. But, they can only help if there are no faults in the device itself. This method is one of the simplest, we open the settings on the mobile phone. And, select the command “reset settings”. Keep in mind that this means deleting all data from your smartphone.

To not disturb the stripes on the Meizu M8 screen, you need:

  • Make sure the integrity and reconnect the display module loop;
  • Replace the screen completely if there is real damage;
  • Update Flyme firmware and shell.

In the first situation, contact could simply be broken. The connection came loose due to a shock, the contacts are clogged, or the display was not fully connected at the factory.

In the second case, it is recommended to contact a warranty specialist or an independent workshop. The third option indicates that you bought a phone with an outdated software version. Which has flaws fixed in updates.

To carry out this procedure, you need:

  • Enter the device settings;
  • Select the item “about phone”;
  • In the submenu, you will need to select the check for updates. when you turn on Wi-Fi, everything will start downloading;
  • The device will reboot.

Mi TV Remote Not working Solve 100% | Hindi | #AbuTechHindi


The appearance of stripes during use can be eliminated immediately after purchase by updating. This does not void your warranty. Unlike a full flashing or self-repair during the same period.

A banal method, it’s just to log into your account on the device.
Click below on the item “Delete Mi account”.

In this case, the account will be disconnected from the mobile phone. The message will no longer appear when the device is booting.

If Xiaomi has lost sound, you should first check the audio settings. If there is an active mode (with sound), then we continue to look for the problem.

Needed. clean the headphone jack.

If the headset icon is lit on the screen of the Xiaomi smartphone, and the headphones are not connected, then the contacts have shorted. Therefore, the sound is transmitted to the headphones, although they are not physically connected.

After cleaning, restart your phone.

If during a call the interlocutor hears you poorly, then this function may be disabled. Go to the settings “sound and vibration” and move the slider “noise reduction” to the value “on”.

If it is activated, and crackling and noise during a conversation are present, then try turning off the function.

The built-in mobile assistant can also interfere with normal microphone operation. Go to the “settings” menu, search for “Google”. Next, turn off the “voice recognizer” function.
Reboot your Xiaomi phone.

Account reset can be done using Xiaomi support.

To do this, you must have documents on your phone. to confirm that it is not stolen.

How to talk to Xiaomi tech support.

xiaomi, remote, control, does, work

Go to your type mail service and log in.

Click to create a message. In the first line, we write this address: mishu@Xiaomi.com Or this one: service.us@Xiaomi.com In the subject you can write (Unlocking my account). You must write in English. Use online translator.

Next, we write what is required. I want to reset Mi account on Xiaomi redmi 6a. This procedure is long and can take 2. 3 weeks.

We choose English and any country;

We make an Internet connection using Wi-Fi or cellular data;

Go to “Privacy Policy” and select any piece of text. On the right, click on the three dots, “Web Search” and “Google App”. Next, we can go to the settings by clicking on the “Settings” entry. We are looking for the item “About Phone” and click on it.

After entering, click on the “Software version (Miui version)”, which you need to quickly click several (about 5) times, until a notification about the granting of “Developer rights” appears. We return and go to “Second Space”, and then “Turn on second space”.

Here a second space is created and the device is already quite ready for use. Nevertheless, after the reboot, everything will be reset and you have to do everything again, so we continue. Go to the settings, then “About Phone”, “Additional Settings” and “Developer menu”. Move the toggle USB Debugging to the enable position.

We connect to the computer using USB and launch Switch. Download “Minimal Adb and Fastboot” and turn it on. We pass to the first desktop, and on the computer we type “adb devices”. Here we enter the following command: adb (input command) shell pm uninstall (parameters) –k –user 0 (values) com.Xiaomi.finddevice (connection with the server);

Delete “Find my phone”.

Nuances after such a decoupling.

After that, the gadget is ready for full operation: you can go online, use various programs, etc.

However, it should be noted that it will not be possible to use Xiaomi services. Which is due to the lack of the account itself. On the Xiaomi account, there are many complaints from users, due to poorly executed software, and it is quite logical that it is deleted.

Mini review of the excellent G20S remote for Android TV boxes

The most popular and sane remotes for Android TV at the moment: Q5 (-A.M), G10 (S), T1 (-M). Each of them has drawbacks, but in general they are high-quality remotes.

G20 (S) is a further development of G10 (S). It is devoid of the main drawbacks that significantly affected the usability of the remote control. flat buttons that felt bad tactilely, and a double Home / Back button. There are two modifications of the remote control. The G20 is a version without a gyroscope, i.e. in mouse mode, if needed, the cursor is controlled with the D-pad. G20S is a version with a gyroscope, i.e. with air mouse function.

The remote comes in an unnamed box. Model G20S has an additional sticker “6 axis Gyroscope”.

Inside: remote control, USB receiver, brief instructions in English and Chinese.

The remote control works via a radio interface. Requires two AAA batteries to operate. There is one programmable IR button (power).

Here’s a size comparison from left to right: Xiaomi Mi Box remote (MDZ-16-AB), G20s, Nvidia Shield TV remote (P2930).

  • Everything works right away on Nvidia Shield TV, Ugoos AM3 with Android TV firmware, boxes with Android TV firmware based on Minix Neo U9-H and others. Connect the receiver and go.
  • Very ergonomic. Sits comfortably in the hand. There are practically no imprints on the case. The only complaint is the shape of the Back and Home buttons.
  • The buttons click softly (a little louder than in the Xiaomi Mi Box remote). They are not pressed hard. Short stroke.
  • The center D-pad button gives the ENTER code, not DPAD_CENTER. The D-pad itself is similar in shape to the Xiaomi Mi Box remote control.
  • The power button is double. it can work both by IR and RF. When not programmed, the POWER code is sent by RF. When it is programmed (copied from another device), the copied code is sent by IR.
  • The duration of holding the power button for IR programming is long enough not to interfere with the long press of the power button to invoke the power menu in systems.
  • There is no need to double-press the buttons to wake up the remote control and perform an action. Those. in any state, press any button on the remote control, and it immediately fulfills the action.
  • The “microphone” button gives the Google Assistant code. VOICE_ASSIST (ie, Global Voice Search is activated).
  • The microphone is activated and works for about 20 seconds after pressing any button on the remote control (then falls asleep). You do not need to hold the microphone button. Those. you can simply select Google Assistant / Global Search on the Android TV home screen and the microphone will work. Those. the “microphone” button is not tied to the microphone itself in any way.
  • The quality of the microphone is perfect. The remote control is brought up to the mouth. perfect recognition, the remote control in the half-bent hand. perfect recognition, the remote control in the lowered hand. perfect recognition. You don’t have to speak loudly.
  • The gyroscope (air mouse) works flawlessly. Saves states, i.e. if you turned off the gyroscope with a button on the remote control, then neither restarting the box nor waking it up from sleep will turn it on, just press the button again.
  • The shape of the Back and Home buttons. It would be better if they were round like the rest.
  • The OK button, in the ideal case, should give the DPAD_CENTER code (it is easy to fix it if necessary, if the system has root).
  • I wish the volume buttons were IR programmable, just like the power button. Those. work by RF before programming and by IR after programming.

Conclusion. an almost ideal remote control for Android TV boxes, without significant drawbacks. It is difficult to estimate the operating time from one set of batteries, but considering that it is made on the same logic as the G10 (S), it should work for a very long time.

Xiaomi Mi TV Stick design

If the previous models of Xiaomi players. Mi Box. did not differ very much from each other in terms of design, then in the new product the company has seriously revised its approach to the form factor of this device. Now it is a “stick”, or “dongle”. a miniature body slightly larger than a large “flash drive” (92x30x15 mm) and noticeably smaller than the complete remote control, which itself is very compact.

The body of the player is made of black plastic, half is matte, half is glossy. The similarity with USB Flash Drive is enhanced by the HDMI connector at its end, which, if you don’t look closely, can easily be confused with USB. In addition to it, on the case you can find only a micro USB port, which is used for power supply. the connection to the network is only wireless, via Wi-Fi.

You can connect the Xiaomi Mi TV Stick to the HDMI input of a TV or receiver either directly, if the configuration of the ports and the free space in the case behind them allows it, or through a small extension cord. it will not look so aesthetically pleasing, but with this connection option there will definitely not be any difficulties. The player can receive power both from the outlet, using the supplied power supply, and from the USB port on the TV.

Review of the media player Xiaomi Mi TV Stick (FHD)


Xiaomi Mi TV Stick comes in a very small box in the traditional orange color. The package includes a remote control, a power supply, a USB cable, a short HDMI extension cable and paper documentation. except for the AAA batteries that power the remote control.

Remote control

But the remote control of the Xiaomi Mi TV Stick remains, in fact, the same as that of the Xiaomi Mi Box S. It is a relatively small “bar” with smoothed sides, vaguely reminiscent of the Apple TV remote control of the first generations, with a voice search button above the ring joystick and a minimal set of other buttons. under it. The remote, of course, connects via Bluetooth, but it does not have the functions of a gyroscopic mouse, so you will not be able to control gestures. Of the differences from the previous generation of the player, you can only point out a different design of the Google Assistant and Netflix buttons and a new button for the Amazon Prime Video client instead of the abolished Live button (which gave access to the Live Channels service).


The Live Channels service that disappeared from the remote control has not actually disappeared; it is still available in the list of applications. Recall that it allows you to collect in one place streaming video broadcasts from different sources and manage them in a “television” style, when each source looks like a regular TV channel.

Of course, you can install applications on this player manually, bypassing the Google Play Store, from APK files (for example, on the Internet, you can easily find recommendations for installing both torrent clients and streaming services with unlicensed content), but for such purposes, all.so there are more suitable options in the form of a large number of media players on the regular version of Android and with higher performance and functionality.

Most media players on Android use a “tablet” version of the system, usually with an additional proprietary shell optimized for large screens and remote control. The TV version of this OS, Android TV, is mainly found in TVs, and there are not so many individual players based on it. Xiaomi is one of the few that produces such devices (see, for example, our review of the previous model, Xiaomi Mi Box S), and this year a miniature stick has replaced the “box” in its line.

Hardware platform, performance

Xiaomi has announced the release of a new Android TV media player in mid-summer. At the same time it was announced that it will be available in two versions: the basic Full HD, which was released in August, and the more “advanced” 4K HDR, which was promised a little later. At the time of this writing, it is still not on sale, so today we have a younger model, Xiaomi Mi TV Stick (FHD), for review.

The player uses an Amlogic SoC, which includes 4 Cortex-A53 cores operating at frequencies up to 1.5 GHz and a Mali-450 video subsystem (up to 750 MHz). There is 1 GB of RAM, there is also an internal storage of 8 GB (about 4 GB is available to the user).

According to unofficial leaks, the SoC installed in the Mi TV Stick is the S805Y. This is a budget solution for Full HD players, which is marginally faster than the S805X (mainly due to a slightly increased GPU frequency). S805Y chipset announced hardware support for decoding HEVC 1080p60 10-bit and VP9 1080p60 video.

Despite the fact that this chipset was presented quite recently, at the beginning of 2020, in terms of overall performance it turns out to be somewhat weaker than the S905L, which was used in the company’s previous player, Mi Box S. Apparently, Xiaomi decided that for the FHD version of their a new player, such a solution (and at the same time, the amount of RAM reduced by half) will be quite sufficient. Immediately, we note that a more efficient chipset is expected in the 4K version of this player. Amlogic S905Y2.

In work

In terms of the initial setup, the Mi TV Stick turns out to be the same as the Mi Box S: when you turn it on for the first time, the player prompts you to make a quick setup using an Android smartphone or tablet. To do this, in the Google application, enter the command set up my device in the search bar, after which the device will detect the Xiaomi Mi TV Stick located in the same local network with it. If the Android smartphone is not at hand, the setup will have to be done in the traditional way, manually connecting to your Wi-Fi. You can also log into your Google account either by entering your login / password using the virtual keyboard, or by authorizing the Mi TV Stick via your smartphone (for which you need to go to www.Android.com/TV/setup and enter the PIN code suggested by the player).

Xiaomi has a proprietary application for a smartphone. Mi Remote controller, but in our case it could not detect a device located in the same Wi-Fi network with a smartphone; however, to control the player, you can use the standard Android TV Remote Control utility from Google, with which there were no problems.

Xiaomi Mi TV Stick supports Google Cast, which allows you to stream content to it from an Android smartphone from applications that support this function (YouTube, TuneIn Radio, Google Photos, etc.). Also, using the Google Home utility, you can duplicate the smartphone screen on the TV and thus watch content in applications without Google Cast support (for example, the built-in photo gallery).

Unlike Mi Box S, which was able to play local media content from USB-connected drives, for Mi TV Stick, in the absence of a USB port, the only source of content is Wi-Fi. accordingly, players with support for playback over a local network are needed, for example, VLC for Android or Kodi Media Center. As expected, the system performance is quite sufficient for Full HD video. the start of playback usually takes less than a second (in some cases. up to 2-3 seconds), all videos, except for the most difficult like Blu-ray remixes, were played without stuttering. By the way, when connected via 2.4 GHz through a bearing wall, the throughput was about 30-35 Mbit / s, at 5 GHz. about 100 Mbit / s. Also note that the player supports hardware decoding of audio tracks in Dolby Digital and DTS formats.

Unfortunately, the performance of the system is not enough for a smooth and fast operation of the interface: quite often there are jerks in the animation of scrolling through lists, slight delays in moving the cursor through menu items and reactions to pressing buttons on the remote control, and launching applications is very slow. like this, “ cold “start of services like YouTube, Netflix or Spotify took 6 to 10 seconds.

What to do if there is a problem with the remote?

Remove the batteries from the remote control before attempting any corrective action. Reinsert after a few minutes. Be careful! Do not mix up the polarities. If the Mi Box remote control does not work due to broken contacts, then it can be repaired. Craftsmen will connect the broken wires in a few minutes. It is difficult to do this without experience and a special tool. Proceed carefully when disassembling. Remove the batteries, then go to the mounts. Remove the screws with a small screwdriver. Next, take a knife and carefully remove the upper case. Review the integrity of the board. If it is broken, it must be replaced. Wipe the parts with a cotton swab. Use an alcohol solution and walk gently over it.

In addition, bright sunlight affects the operation of the remote control. They interfere with the signal. Another option is a malfunction of the diode indicator.


Before repairing the device, you need to determine the cause. Why doesn’t Mi Box see the remote? Major problems:

  • damaged contacts inside the headset;
  • external interference from other equipment;
  • discharged batteries;
  • failure of the indicator light;
  • broken buttons;
  • Bluetooth connection problems.

Next, we will tell you in detail what to do with it.

Why the remote control from the Xiaomi Mi Box does not work: reasons, how to fix?

Not sure why the Mi Box remote does not work? Every user has faced a similar problem at least once. Does the device not respond to the remote control? The diode indicator may be broken. If it is off, then the remote control is damaged. The service center will help you find out the cause of the breakdown. Bring the device and describe the problem to the master. We offer tips on how to identify and fix the failure yourself.

We solve the problem if the console does not respond to the remote control

Xiaomi TV box not responding to remote control? Most likely the problem is in the receiver or TV itself. Reboot the device, unplug it for a couple of minutes. If the situation does not change, perform a factory reset. The receiver may be buggy. Otherwise, contact the service center. Take the device to a specialist.

List of smartphones

For smartphones, there must also be a condition. the presence of an infrared port provided by an infrared sensor. Through it, the Infrared Data Association (IrDA) technology uses light in the infrared spectrum, which is invisible to humans, but is perceived by other gadgets in the line of sight. IrDA technology is optionally supported by many Xiaomi smartphones and their offshoots Redmi on Android:

  • Redmi lines 4, 5, 6, 7.
  • Redmi Note 5, 6, 7 versions.
  • Redmi 8, Redmi 8 Note, Note Pro, Note 8T.
  • Redmi 9 line.
  • Mi 10, Mi 10 Pro.
  • Poco F1, Poco X2.
  • Redmi K20, K20 PRO, K30.

This sensor is not implemented in budget versions of smartphones with the prefix “A”. With their help, you can control only Mi TV or Mi Box by connecting to a single Wi-Fi network.

Xiaomi Mi Remote: what it is and how to set it up correctly

Hello everyone! If you have too many electronics in your house, then you definitely need an Mi remote. It will help you remotely control these gadgets, using one single remote control for everything. It is noteworthy that the role of such a remote control is not a long, refined unit with a picture of a hare in an earflap, but an application for your smartphone from Xiaomi.

  • What is this application?
  • List of smartphones
  • Functional
  • Customization
  • Answers on questions

What is this application?

Mi Remote is a software unit that turns a smartphone into a remote control for electronic equipment:

  • TVs;
  • AV receivers;
  • TV boxes;
  • Projectors;
  • DVD players;
  • Air conditioners;
  • Fans.

The trick of the Mi remote control is that it supports various manufacturers of electronic devices, not just Xiaomi. Among the technology it is really possible to meet: Samsung, Sony, LF, Panasonic, Mikromax and others.

The main condition for pairing is that the gadget must be relatively new. Old devices alas. they are not supported.


Mi Remote Controller allows you to fully monitor the indicators and control the interfaced equipment. For example, through the application you can:

  • Decrease or increase TV volume.
  • Decrease the temperature or air flow rate in the air conditioner.
  • Click the camera shutter.
  • Deactivate TV-Box.
  • Dim the light of the smart lamp.

The features of the Mi Remut application are:

  • Clear and simple interface;
  • Remote control and remote interaction with equipment has been implemented;
  • There is support for any smartphone with an infrared port, working with IrDA technology;
  • Orientation of the program for a huge amount of equipment;
  • There is an option to view TV programs.
  • The program is completely free and available all over the world.

It is noteworthy that the remote control is not connected to the Internet. Although access to the global network is required to connect a new device, you can interact with electronics without connecting to Wi-Fi or a mobile operator’s network.


First you need to download the Mi remote control from the Play Market or update it if you have a Xiaomi smartphone. It is installed on these phones out of the box. The Xiaomi remote control icon can be found in the Tools folder. APP name in English: Xiaomi Mi Remote Controller.

How to set up the Mi remote:

  • Download and run the application on your phone. Then click on the big “Add Remote” button at the bottom of the screen.
  • Then select your technique and the manufacturer of this technique.
  • Then follow the prompts of the app.
  • For example, point your phone at the device and click on the big button to check if the buttons are working correctly.
  • When the device has passed the test, enter its name in the special column and you can pull up a shortcut to the device (indicating, for example, the room where this device is located).
  • Program shortcuts are quite convenient, especially if several air conditioners or TVs are mated in different rooms.
  • After saving, each tweaked gadget will have its own remote control with functional buttons.
  • As an option “My room”, it is allowed to control several devices from one remote control.

Setting up the latter is done through the same shortcuts, which is quite convenient.