Xiaomi right earphone does not turn on

Table of Contents

First, let’s look at why Redmi and Mi AirDots do not turn on at all. Most often, this indicates a serious breakdown, which requires an appeal to the masters.

Manufacturing defects

Always check electronics before purchasing and only go for well-rated chain stores. Also ask for a warranty that allows free repairs and return of goods within a certain period. If the device does not turn on immediately after purchase, immediately contact the seller with a claim.

Also, be careful about fakes. A fake gadget does not function well, looks unpresentable and breaks very easily. Check out our article on Checking the Originality of Headphones.

Mechanical damage

After AirDots have been dropped from a great height or entered into water, they may not work at all. Check the device for cracks, chips, and scratches. Unfortunately, it is impossible to cope with a mechanical breakdown, when some part is broken / damaged, at home. Only an experienced master will help.

Full charge

The most innocuous reason is the usual discharge of the battery. The case needs to be connected via USB to a power source, and then place the ear pads in the “sockets” for wireless recharge.

Dots should turn on automatically when removed from the case, but this will not happen if the docking station is empty: you will need to manually turn it on by long pressing the buttons. For the same reason, the earbuds may not turn off on their own in the case, so always keep an eye on the charge level.

How To Resolve Xiaomi Mi Earbuds No Light Not Charging One Side | Malay

Disabled one earbud

When the sound does not come from only one earphone, the situation is more favorable. Usually there is a system failure that results in an out of sync. We have already described in a separate manual how to return the binaural mode. Here we duplicate the main information.

Reset to factory settings

Hard reset. a hard reset, after which the device completely returns to the factory state. Reset fixes system problems and allows you to configure the gadget from scratch. It is recommended to resort to this operation if the left earbud does not connect to the right one, and the sound comes from only one ear cushion.

  • We take the headset out of the case and clamp the panel until the red indicator appears.
  • Press the button again and do not release for 40-50 seconds. The lights should blink red and white a few times.
  • We place the earbuds in the case and remove them after a few minutes to re-pair with the phone.

Proper synchronization

  • Disconnect AirDots from the device and remove the model from the list of Bluetooth devices if pairing has already been done before.
  • Hold the key for 5 seconds until a red flashlight appears, release and hold for another 10 seconds. We place the earbuds in the docking station, after a minute we take it out and turn it on in turn.
  • As soon as the right earpiece starts flashing white, we find “AirDots BASIC_R” in the list of Bluetooth devices and connect.
  • Now it remains to connect the left earbud to the right one by pressing the button on it.

Similar procedures are also suitable for the more expensive Xiaomi AirDots Pro headset, only there actions must be carried out with a case on which a special control button is located.

We have found out the main reasons why Bluetooth headphones may not turn on. If none of the described methods helps, contact the service center as soon as possible.

The operation of a wireless headset is based on receiving data from the device through various data transfer methods. It can be a radio connection, an infrared receiver, a Bluetooth connection. Xiaomi wireless headphones use the latter method, which is due to the simplicity and reliability of the connection and ease of use.

To connect a Xiaomi Bluetooth headset, you need to turn it on and connect with the gadget. The process usually takes a few seconds, after which the headphones are ready to use.

Because of what only one earphone can play?

Why can Xiaomi headphones start working one at a time? The reason for the malfunction is that they cannot synchronize. The connection between the right and left earbuds and the smartphone stops working.

This is caused by various reasons, for example, the complete discharge of one AirDots. In addition to the complete lack of connection between the headphones, they may not connect correctly. This may cause the sound to become out of sync, making it impossible to listen to music. Therefore, the problem that has arisen must be solved immediately.

How to solve this problem?

The problem is solved very simply. you need to synchronize the headset by performing a complete reset of the headset.

To reset Xiaomi wireless headphones, you need to turn them off. Pinch the touchpads and hold them until the lights turn red. Press the panels again and hold for 30-50 seconds. The AirDots should turn on (you will see a blinking white light), after 10-20 seconds the lights will turn red and white and blink twice. It is necessary to keep the buttons pressed until the lights go out, and then blink a few more times. This is a signal indicating the successful completion of the repair.

Place the dropped headset in the case for 5 seconds and remove it. Synchronization will start. When the left earbud can find the right one and connect, try to connect to the phone. If the headset is working, you will hear stereo sound.

This method works with both Mi AirDots and Redmi AirDots. In the case of Redmi wireless headphones, you must wait until they beep twice, all other instructions remain unchanged.

After a full reset, a situation may arise when the phone sees both headphones as two separate devices. In this case, you should connect the right earphone, wait until it starts working, and press the button on the left. Both headphones should sync.

There is another way to make both AirDots connect. This procedure is also very simple and does not take much time. The main thing is not to rush and follow the sequence of actions:

  • remove the headset case, close and make sure it is charged;
  • if the battery is charged, pull out one earphone;
  • wait for the earphone to automatically turn on and turn it off forcibly with a long press;
  • hold the panel and hold it until the red indicator turns on;
  • pull out the second earpiece and do the same steps with it in the same sequence;
  • put the headset with luminous red indicators into the case.

After carrying out these manipulations, the headphones should be synchronized and work in stereo mode.

If you didn’t succeed the first time, repeat the procedure. Clearing Bluetooth app data on a smartphone can also help.

Headphones Xiaomi

Good evening. Recently, when I put the Xiaomi Mi True Wireless Earbuds case on charge, I have to hold it, somehow.

Airpods not working well over 6 months ago Xiaomi Mi Air 2S headphones

Good afternoon. Headphones Xiaomi Air 2S pro. There are two problems. After I install the headphones in the case, they do not disconnect from the phone.

Headphone not charging over 6 months ago Xiaomi Redmi AirDots Headphones

Good night. Immediately after buying Xiaomi Redmi AirDots headphones, the pin in the case goes down, as if the spring is working on the contrary, with tweezers.

There is no sound in the right earbud more than 6 months ago Xiaomi FIIL CC Headphones

Hello. There is no sound coming from the Xiaomi FIIL CC right earphone through the main mesh that looks into the ear, although it is clean (certainly cleaner than.

Good evening. The Xiaomi headphone case does not charge and does not show signs of life at all. What is the reason? How much will it cost to repair.

1 wireless earbud not working over a year ago Xiaomi Redmi AirDots headphones

Good afternoon. Redmi AirDots 2 headphones were purchased about 3 weeks ago, and suddenly one of them stopped working, does not charge, and even.

The case flashes red when charging over a year ago Xiaomi Redmi AirDots headphones

Hello, when charging the Xiaomi Redmi AirDots 2 headphone case, it flashes red, but the headphones are charging, what could be the problem.

Headphone case problem over a year ago Xiaomi Redmi AirDots headphones

Hello, about six months ago, I bought Xiaomi Redmi AirDots headphones, but not so long ago I realized that the case was running out of power too quickly.

Buy Xiaomi AirDots Right Earphone over a year ago Xiaomi Redmi AirDots Earphones

Good morning. Please advise where can I buy the right earphone Xiaomi Redmi AirDots? I will be very grateful to you!

One Xiaomi earphone stopped charging over a year ago Xiaomi Redmi AirDots earbuds

One of the Xiaomi AirDots headphones stopped charging. The right earpiece constantly asks for a charge, when put in the charging case, it lights up.

Headphone case cover dangles more than a year ago Xiaomi AirDots Pro headphones

Good evening. The cover of the Xiaomi AirDots headphone case is loose, can it be fixed and if so, how can it be done?

Xiaomi headphone case not working over a year ago Xiaomi Redmi AirDots headphones

Hello dear masters. Help, please, my Xiaomi Redmi AirDots case cover is broken, or rather, not.

Xiaomi Mi True Wireless Earbuds not working over a year ago Xiaomi Mi True Wireless Earbuds

Hello. Xiaomi Mi True Wireless Earbuds not charging. The left earbud sometimes flashes pink, but then.

Redmi AirDots case not charging over a year ago Xiaomi Redmi AirDots headphones

Hello. I bought new Xiaomi Redmi AirDots headphones and on the very first day I put the case on charge, and it started to glow red and I calmly walked along.

Xiaomi headphones won’t turn on over a year ago Xiaomi Mi Sports headphones

Hello. Fully charged headphones Xiaomi Mi Sports Bluetooth Earphons turned on, but not for long, and then turned off. It takes about 2 hours.

Music not playing in right earbud over a year ago Xiaomi Redmi AirDots headphones

Good afternoon. I took Xiaomi Redmi AirDots headphones and everything was fine. For the third month after purchase, music no longer plays in one earphone.

The left earpiece began to play music more quietly more than a year ago Xiaomi AirDots Pro Headphones

Good evening. After 2 weeks of use, the left earpiece began to play much quieter (it has nothing to do with pollution), tell me.

The protective mesh in the headphones broke over a year ago Xiaomi AirDots Pro headphones

Good afternoon. The protective mesh on both headphones suddenly broke, and I don’t understand how, tell me, please, who knows what.

I opened them abruptly and the lid broke, what should I do now??

The earphone in the case does not charge more than a year ago Xiaomi AirDots Pro headphones

Hello! I recently bought AirDots pro headphones from Xiaomi. Everything was fine, but recently the right earpiece stopped charging in the case. After.

Why wireless AirDots don’t work

Headphones from a Chinese manufacturer are mainly bought online. Because of this, there is no way to quickly contact support or even return a device that refuses to work stably. First of all, don’t rush. You need to give yourself time to properly understand how AirDots work. And although there are few buttons and functions in it, you can still do something wrong. Headphone breakage should be considered as a last resort.

AirDots headphones, like other similar devices, accept primary settings that are generated automatically. And then they use them by default. If you do something wrong immediately after unpacking them, they will not work until these settings are reset. After the reset, you will need to reconfigure the headphones. But it needs to be done right. According to the manufacturer’s instructions.

Reset settings if one earbud does not connect

If you’re having trouble turning on one of your headphones, the first thing to do is reset it. Or do a hard reset. This will allow you to reconfigure them and perform this action correctly.

    Hold both AirDots in both hands;

Factory reset on headphones completed. Now you need to start setting them up correctly. Both earbuds must be placed in the case.

And wait until they turn red. Now you can get them.

Proper AirDots setup

It doesn’t matter which of your headphones is not connected. right or left. The principle of action should be the same. First you need to perform a Hard Reset. We have already done this. Now you need to set up your AirDots. And this is nothing special, because after the reset they need to be removed from the case. And, usually, the left earpiece finds the right one. The problem is deeper. Since the incorrect setting of the headphones may be repeated periodically.

This is due to their incorrect work, incorrect internal program work. Most likely, in the next versions of this device, these shortcomings will be eliminated by the developers. For now, we just have to be patient. And reboot them if the AirDots start to malfunction again. One of the earphones may stop working after the device has run out of power. When we turn it back on after recharging, only one of them works. You have to repeat the above steps to fix it.

See also  How to use viber on your computer

Fixed MI True wireless earphones 2 basic one side not working | with video

New headphones from Xiaomi. AirDots are created in the image of the popular Airpods device. Which, in turn, inherited the form from the French model of the unusual AirPod car. However, the Chinese device has a great compact style.

Have technical characteristics that fully meet the needs of the average user.

  • Support for the latest version of Bluetooth 5.0 technology;
  • Their case has no flaws, like plastic burrs and the like;
  • The main button has several functions to control;
  • Headphones can work up to 12 hours (with a case);
  • Built-in DSP (noise reduction) function;
  • Built-in microphone for phone calls;
  • Weight of each earpiece 4.1 grams.

Each AirDots earphone has its own battery, which allows them to play music continuously for 4 hours. Or talk on the phone.

Other issues with Xiaomi device

One of the AirDots headphones does not connect. these are not all the malfunctions that the user may encounter. Sometimes, while watching a movie on a mobile device, listening to music or listening to the radio, both earbuds stop working. In this case, the voice assistant (Chinese voice) may be active. This happens when you press the headphone buttons several times in random order.

The problem is solved in the same way as in the case of the failure of one of the headphones. Both devices need to be rebooted. This process is described above, so there is no point in repeating the steps that need to be performed for this. Make sure that the battery level of the headphones is sufficient for their operation. And put them in a case if you need recharging.

There are several reasons why one of the headphones may not work. Among them:

  • Speaker clogged with gray.
  • The element required for power supply is not positioned correctly.
  • Headset is not positioned correctly.
  • Errors during the connection process.
  • Wrong settings on audio source set.
  • Bluetooth capsule not positioned correctly.

All breakdowns are determined and corrected on an individual basis.

How to determine the cause

Reasons can be identified as follows:

  • Check the device, if it is clogged with sulfur, you will see it. They should be cleaned, and hygiene rules should be observed in the future. But you can buy special headphones that are protected from sulfur.
  • The battery needs to be checked. Bluetooth headphones work wirelessly but require a battery. It is necessary to make sure that the battery is in the correct position, namely the polarity.
  • If the headset is not positioned correctly, try reading the instructions for use. Some headphones will only work if they are worn around the neck or on the arm (it all depends on the individual parameters of the antenna).
  • When using the headset for the first time, the device must be searched in the active list on the phone. But many headsets have similar names, so it’s easy to confuse them with those that were connected earlier. You should clear the phone’s memory or use the search.
  • If the settings are incorrect, they should be corrected. Most often, the default device is the speaker of the phone, not the headphones. You need to change this setting in the settings. But if the sound does not come to the phone’s speakers, then the reason is different.

Attention! Make sure that the device is properly positioned in your ears. The speakers have a very narrow directivity. Perhaps the device itself is fine, but it is located at the wrong angle and the walls of the ear canal block the path of sounds.

How to fix the problem

Depending on the breakdown, you can repair a bluetooth device, both at home and by contacting a service center. Minor damage and defects can be repaired with your own hands.

Sulfur clogging

  • We take a needle.
  • We take out the dirty filter.
  • We check it for the presence of sulfur.
  • Carefully clean the speaker, trying not to damage the latter.
  • Installing a new filter.
  • Connect headphones and check the work.

Battery placed incorrectly

The issue here is polarity. We check the placement and For devices 11 mm outward, and. inward. For 9 and 6 mm vice versa. If after inserting the battery you hear a slight noise from the speaker, then you did everything right.

Headset not placed correctly

Some headphones only work on the neck, and some only work on the arm. It all depends on the individual characteristics of the antenna. Read the instructions to understand how to use the device.

The headset was not connected correctly

If your phone has a lot of similar names, try clearing the memory. Then there will be only one thing that we need. Another good idea is to rename the name of the device you are using.

Wrong settings set

By default, many phones transmit audio signals through the speaker rather than through the headphones. You need to do the following:

  • Go to phone settings.
  • Find the name Sound or Sound Source (may be slightly different depending on the model).
  • Select headphones as source.

The earpiece is incorrectly placed in the ear

Everything is simple here. Place the speaker so that you can hear well.

Other problems

But there are also breakdowns, due to which you have to contact the service center:

  • Moisture has entered the device. This will damage the contacts.
  • The device has been dropped from a great height.
  • You accidentally crushed the speaker.
  • The contacts have oxidized (there was a battery inside for a long time, it must be removed if you do not use headphones).
  • If you bend the loop of the headset, there is a risk of breaking the winding of the induction wires.

These problems can also be solved on your own if you know how to use a soldering iron and know the internal structure of the headphones.

Before proceeding with troubleshooting, make sure that AirDots have not been subjected to mechanical impact: falling on a hard surface, impact, moisture. If you step on the gadget, it can easily break, hence the lack of sound. In such a situation, contact the service center.

Switching to binaural mode

With prolonged use, the headset begins to function in mono mode, that is, only the right AirDots is active. The left one doesn’t work.

In order for AirDots to switch to binaural pairing, you need to:

  • Disconnect Redmi or Mi Airdots from the phone, and remove the model from the Bluetooth list by selecting the “Forget this device” command.
  • Turn off the headphones by holding the control buttons for 5 seconds.
  • Hold the panels for 10 seconds until the red and white lights are on.
  • Put the headset in the case and take it out again. Sync will start and the earbuds will connect to each other.
  • In the Bluetooth list, find “AIRDOTS_R” and connect.


Each Dots contains a 40 mAh battery. If the headphones were used separately, one could be discharged faster. First, we charge the docking station by connecting it via a micro-USB cable to a power source. Next, we place the earbuds in the “slots” of the case, and wireless charging begins. After that, there should be stable sound from two earbuds.

Battery replacement

The battery could fail for various reasons: improper charging, prolonged use, and other options. Repair will not help. the service center will simply replace the battery with a new one, and AirDots will work well again.

Reset to factory settings

There are a few more operations by pressing the panel, which will return the headphones to the factory state and allow you to synchronize without problems.

  • Press the buttons until the red light appears.
  • Press again and hold for 30-50 seconds. At first the indicator will turn white, and then red-white. Release the key when the flashlight blinks twice and goes out.
  • Place the headset in the case for 5 seconds and remove.
  • We are waiting for pairing and connect via smartphone.
  • We charge the docking station and put two earbuds there. We get one.
  • The earpiece will turn on automatically: you need to deactivate it with a long press, and then hold the button until the red indicator lights up.
  • We do the same with the second earpiece. While the flashlights are glowing, we place the ear pads in the case.
  • We get and synchronize the devices in the usual way. Binaural mode after all the manipulations done will work automatically.

Ear pad cleaning

If the structure is seriously soiled, the sound may not come at all or it may play very quietly. The solution to the problem is simple: we arm ourselves with a needle or a cotton swab and clean the entire liner inside by removing the silicone nozzle and protective mesh.

Today we discussed why only one AirDots wireless earbud works. The instructions are universal, and will fit both Redmi and Mi Airdots.

How to fix one wired earphone if it’s not working?

There are tricks that will help get rid of problems and fix the headphones without contacting a specialist. The main thing is to correctly diagnose the malfunction and know how to fix it.

One big ear does not work in headphones

Troubleshooting is easy:

  • Carefully feel the wire at the time when any audio recording is turned on. The sound will wheeze or crackle where the wire breaks.
  • A damaged membrane can only be detected by looking inside the earphone, for this you need to unscrew the screws.

How to fix a faulty vacuum earpiece?

Often the cause of a non-working headphone is earwax. Then you need to clean it up:

  • Remove the dirty filter from the earpiece,
  • Check for dirt on the speaker itself,
  • Install a new filter,
  • Check the performance of the device after cleaning.

One headphone does not work on a computer or laptop

There may be several reasons for the lack of sound in the headphones when connected to a PC:

  • Necessary network card drivers not installed.
  • Device drivers not installed.
  • The sound level is set to the minimum value or completely turned off.

One earbud not working

Have you experienced that the sound is quieter in the left or right earphone? Surely the problem lies in the device at the hardware level. It’s easy to check your guess: just connect it to any other audio device and check the sound quality.

If you are looking for a headset for your smartphone, then be sure to read the rating of the best headphones for your phone.

One wireless earbud not working

Bluetooth devices are replacing wired gadgets everywhere. However, they may also have problems with sound. And here it can only be in the hardware part, since these devices are wireless.

Why is one bluetooth earphone not working

There are a number of reasons why one ear does not work in headphones:

  • Speaker clogged with gray.
  • The device was dropped on a hard surface.
  • Contacts are oxidized.
  • The speaker or headset loop has been pinched.
  • Battery installed incorrectly.
  • An error occurred while connecting the device.
  • Audio source has incorrect settings.
  • The Bluetooth capsule and the headset itself are incorrectly positioned.
  • Water or dirt ingress.
  • Malfunction of any parts of the earpiece (speakers, membranes, etc.).

One wireless earbud does not work: what to do?

  • Clean the earphone from dirt/wax.
  • Check battery polarity.
  • Some headphones work, for example, only when worn around the neck, so the correct position is important for correct operation.
  • Make sure the device is paired with the phone or other device you are connecting it to.
  • Check settings: sometimes the main audio device is not the one you want to connect, and therefore it does not work.

One earpiece does not work: causes and help

What should I do if one earbud does not work? Why is one earbud not working? Surely you often use audio equipment, and sooner or later it starts to malfunction. Either the left ear begins to wheeze, then the right one does not work at all, and vice versa. Nothing lasts forever, but you can (and even need to) extend the life of your favorite device, especially if you diagnose the malfunction in time and correctly:

  • Drivers for this device are obsolete.
  • A broken wire has occurred: this is one of the most common reasons why the left or right wired earphone does not work.
  • Membrane ruptured due to fall.
  • Foreign objects or water got inside.

By the way, we recently talked about how to charge wireless headphones and how to connect headphones to a laptop, if you don’t know, go to the links.

Features of repairing headphones of various brands

Xiaomi AirDots: one earbud does not work

Owners of this wireless device often complain that one Xiaomi earphone does not work (therefore, before buying, be sure to read our rating of the best headphones from this manufacturer). Often this happens due to the specifics of their work: first, the right (leading) earphone connects to the left one and only then is synchronized with the phone. Due to the fact that many do not wait for the end of pairing, one earphone may not find the second.

Fixing this problem is easy: you just need to roll back the device to factory settings:

  • Click on the phone “Forget device” to cancel the existing pairing of devices.
  • We take out the headphones from the case and reboot them with a long press.
  • Then we return the headphones to the box.
  • We are waiting for the headphones to first synchronize with each other.
  • The device will warn you about the end of the synchronization with a signal, after which you can connect them to the phone again.

Why does one JBL wireless earphone and devices from other brands not work

In fact, troubleshooting in the case of wireless headphones always starts with a rollback to factory settings. If this measure does not help, then you should look for another reason from the above. You can try to fix the headphones yourself, but please note that in this case, you will not have to count on repairs under warranty. Therefore, it is better to entrust your favorite device to professionals. And then it will delight you with high-quality sound for a long time.!

How to use Xiaomi Redmi AirDots in mono mode

Sometimes, for some reason, or simply of their own free will, the user wants to activate mono mode. This assumes that only one of the headphones will be connected to the phone.

Step 2. Follow the procedure of pairing Redmi AirDots_L with your smartphone.

Step 3. Now your left dots is connected to the device and you can use it independently from the right.

If you have activated mono mode, the headphones will be out of sync. In order for the stereo mode to work, you need to reset the “mono” connection, first remove the right earbud from the case, and make it connect to the smartphone first before the left one is connected. If you first take out and connect the left earphone, Xiaomi Air Dots will not pair synchronously, but only independently of each other.

Step 1. Reset the Bluetooth connection to disconnect the headphones and smartphone. Clear Xiaomi Redmi AirDots connection information from mobile phone. Turn off the plugs yourself. To do this, press the physical button on each of them and hold it down for 5 seconds (the red LED will be on) to enter the shutdown mode.

Step 2. In the Air Dots shutdown mode, press the buttons again and hold without removing your finger from the buttons for 10 seconds. The red and white lights will flash alternately, and then the indicator will turn off. Press the buttons all 10 seconds, because you want the red and white signals to alternately light up each three times. After that, the connection state will be reset.

Step 3. Put the dots back in the charging case and then take them out of the case. Wait 3 seconds until the “gags” turn on automatically and do not connect. When the white signal slowly flashes on the right earphone, turn on Bluetooth on your phone and start searching for “Redmi AirDots_R”.

See also  Why do you need a second space on Xiaomi

You need to start pairing with a smartphone separately and without fail from the right dots. AirDots cannot automatically connect to the right to the left. It looks like this was done on purpose so that mono mode can be used. To connect the stereo mode, in which two headphones would function at the same time, you must follow the steps suggested above.

How to solve the problem with connecting Redmi Air Dots to a smartphone

What should I do if I can’t connect the second earphone, even if you connected the first R-earphone? Basically, this problem occurs due to the fact that the connection was not made correctly. In this case, confusion arises, and AirDots has to be re-paired with a smartphone.

What to do if you encounter a problem when connecting two Redmi AirDots to your smartphone.

  • Remove both dots from the case and turn them off. To do this, press the buttons on each of them so that the LED lights up red.
  • Long press to turn both earbuds on. At the same time, you should see that the red and white signal blinked twice. For this to happen, the physical button must be held down for a few seconds. After the indicator (both on the right and on the left) lights up and goes out twice, the button can be released.
  • Now put both back in the case.
  • On your phone, open the Bluetooth settings and in the list of connected devices, find and delete the Redmi AirDots R and L entries (if you have connected these headphones before).
  • Remove both dots from the case again and reconnect them to your smartphone. Or rather, connect only Redmi AirDots R and it will automatically pair with L.

Why can’t I connect both earbuds to my smartphone?

Unfortunately, it happens that one of the headphones constantly loses the signal, turns off and the smartphone no longer sees it. Then you have to reconnect the pair. This process does not always go smoothly, so it is not possible to connect both dots (stereo mode). There are 2 main reasons for this:

  • The user first connected to the smartphone Redmi AirDots L.
  • The connection procedure was incorrect, so manual reconfiguration is required, as described in the instructions above.

If the manual reconfiguration method did not solve the problem, then most likely your headphones are defective, return them to the store.

What to do if one earbud does not charge in Xiaomi AirDots?

Another common reason why one Xiaomi wireless earbud does not connect is a battery problem.

Each headphone contains its own lithium-ion battery, which requires quite careful handling.

Few users know that batteries really do not like temperatures below zero, they noticeably lose capacity, and in severe frost they can turn off altogether, despite the fact that you just fully charged it. Therefore, if one Xiaomi AirDots earphone does not burn, you need to take this carefully and consistently try to restore its performance.

After warming up, the battery capacity is restored with loss, and if you often exposed the battery of Xiaomi wireless headphones to cold, for example, if you wore them in winter in a big frost, in just one winter it can become completely unusable.

If one of the Xiaomi AirDots is not charging, you need to look at the indicator light. The manufacturer has built in a simple self-diagnosis system, and if you see that when you connect the USB cable to the case in which the AirDots are located, one of them blinks pink, this means that the battery is completely out of order and needs to be replaced.

If you are sure that the charging case’s own battery is charged, you put one of the headphones inside for 20-30 minutes, remove it and it does not charge or turn on, then the battery is broken and needs to be replaced.

Why wireless AirDots don’t work

Headphones from a Chinese manufacturer are mainly bought online. Because of this, there is no way to quickly contact support or even return a device that refuses to work stably. First of all, don’t rush. You need to give yourself time to properly understand how AirDots work. And although there are few buttons and functions in it, you can still do something wrong. Headphone breakage should be considered as a last resort.

AirDots headphones, like other similar devices, accept primary settings that are generated automatically. And then they use them by default. If you do something wrong immediately after unpacking them, they will not work until these settings are reset. After the reset, you will need to reconfigure the headphones. But it needs to be done right. According to the manufacturer’s instructions.


To restore the normal operation of the TWS headset, resetting the settings to factory settings helps.

Actions are performed in strict sequence:

  • Disable smartphone pairing. To do this, in the list of Bluetooth devices, select “Mi True Wireless Esb Basic_R” (Redmi model) or “Mi AirDots BASIC_R” (Xiaomi earbuds), click “Unpair” or “Forget device”.
  • Take the devices out of the case. Hold the control button on both devices at the same time for 30-40 seconds (Redmi. multitasking key, Mi. touchpad).
  • Follow the light indication: the light on the headphones flashes white, after 10-20 seconds the indication will change to red-white, continue for another 10-20 seconds.
  • Wait for a complete shutdown: the diode will go out.
  • Reset was successful.
  • Place the AirDots in the case for 3-5 seconds.
  • After a while, take it out, the process of synchronizing the “ears” with each other will start.
  • If the process completed successfully, you will hear a beep.
  • Devices ready to re-pair.

There are only two reasons why the elements of the system turned out to be not conjugated. In the first case, the user could overexpose the button when turning on one of the devices or accidentally press it in the case while charging. But more often there is a second case, when desynchronization occurs after a complete discharge of one of the devices, both of them (due to the fact that the right or left earpiece turned off a little earlier) or the charging case.

If this is your situation, to fix it, you need to do the following:

  • recharge the case;
  • place both earbuds in the charging sockets for a few minutes (or longer if they are almost completely discharged);
  • take out the devices and at the same time hold down their control buttons (this is a universal “recipe” for all generations of headsets on both push-button and touch devices when Xiaomi AirDots headphones do not work together);
  • you need to hold the buttons for a long time. from 15 to 50 seconds, during this time 2 cycles of alternate flashing of red and white diodes on each earphone should pass and 2 beeps should sound;
  • the fact that the settings have been reset is indicated by the simultaneous burning of the red indicators;
  • as soon as the red lights light up on both devices, they must be placed in a case;
  • after a few seconds we take out the headphones, watch how they both flicker with white light (turn on), then the flicker remains only on the right device. that’s it, you can connect to the phone.

How to connect Redmi AirDots after factory reset

This is usually considered an unnecessary measure, but if you reconnect the headset precisely because the Redmi AirDots headphones are out of sync, additional actions with the smartphone will not hurt.

  • turn off Bluetooth on the phone;
  • go to the list of previously detected Bluetooth devices;
  • remove Redmi AirDots from the list (right and left, if the smartphone saw them separately);
  • reset the settings on the headphones;
  • turn on Bluetooth on the phone;
  • perform a new search;
  • we connect the only detected device. Redmi AirDots R.

Why one Xiaomi Redmi AirDots earbud works, capable of solving the problem

First you need to decide what exactly is wrong. There are three options here:

  • For some reason, the Redmi AirDots got out of sync. When searching for Bluetooth devices, the phone sees them both. And they only connect one at a time.
  • One Xiaomi AirDots earphone does not work at all and does not respond to attempts to recharge it (after being placed in its socket in the case, it does not blink in any colors and when removed, the white diode does not light up).
  • Headset devices work separately, but both show “signs of life” when placed in and out of the charging case.

Mechanical damage

In frequent cases, if the left AirDots earpiece does not connect, the reason lies in mechanical damage. For example, the headset accidentally fell or was crushed by a heavy object. Under such circumstances, the wireless device will have to be taken to a service center, since not everyone will be able to eliminate mechanical damage with their own hands.

Other issues with Xiaomi device

One of the AirDots headphones does not connect. these are not all the malfunctions that the user may encounter. Sometimes, while watching a movie on a mobile device, listening to music or listening to the radio, both earbuds stop working. In this case, the voice assistant (Chinese voice) may be active. This happens when you press the headphone buttons several times in random order.

The problem is solved in the same way as in the case of the failure of one of the headphones. Both devices need to be rebooted. This process is described above, so there is no point in repeating the steps that need to be performed for this. Make sure that the battery level of the headphones is sufficient for their operation. And put them in a case if you need recharging.

Sound out of sync

Often the desynchronization of sound in airdots occurs due to improper connection of the elements to each other. There are several ways to fix the problem. reconnecting or resetting to the factory configuration. First of all, you need to do:

  • Make sure the case and headset are fully charged.
  • Put the headset in the case and wait a few minutes.
  • Get one airdots, and leave the second in the case for now.
  • If the headset is connected to a smartphone, perform a forced shutdown. To do this, press and hold the touchpad for half a minute. Upon completion, the LED should light up.
  • Next, you need to perform the same manipulation with the second AirDots.
  • After both flashing earphones need to be put into the charging case and wait a few minutes.
  • Take out the headset and reconnect to the smartphone.

Attention! If the above method does not help, you will need to reset the settings. To do this, you need to take out the headphones and press the touch pads so that the red indicator lights up. Pinch the panels again and hold for a minute. After turning off the LED, the device must be put in a case, wait and try to connect again.

Mechanical damage

In frequent cases, if the left AirDots earpiece does not connect, the reason lies in mechanical damage. For example, the headset accidentally fell or was crushed by a heavy object. Under such circumstances, the wireless device will have to be taken to a service center, since not everyone will be able to eliminate mechanical damage with their own hands.

Non-working battery

Another reason for the inability to connect Xiaomi Redmi AirDots to a smartphone is a faulty battery. This can happen for many reasons:

  • full discharge of the battery for a long time;
  • too long service life;
  • USB cable incorrectly connected to the case.

When the cable is connected while the battery is not working, the earphone flashes in pink. In this case, the device cannot be repaired, so a complete battery replacement will be required.

And also the problem may be that the battery of the case is completely discharged. In this case, you will need to first charge the case, then connect it to the right and left earbuds.

Why does Redmi AirDots not connect the left or right earphone, a solution to the problem

Redmi AirDots is a popular wireless headset developed by Xiaomi. This model offers decent technical characteristics and a fairly long battery life. However, often there are malfunctions in the operation of the headphones and there may be several reasons for this. problems with the battery, desynchronization or mechanical damage. This article will discuss why the left or right earbud does not connect to Redmi AirDots, and how to fix it.

What to do when AirDots won’t connect

When the wireless headset is connected to a smartphone, the body of the device is highlighted in red. This indicates a successful pairing. If the phone no longer sees the headset, you will need to do the following:

Important! The case must be charged before this procedure so that the headphones can automatically turn on after being removed from the charging case.

  • Cancel the pairing of the smartphone and Airdots, to do this, delete the saved connection in the Bluetooth settings.
  • Turn off the power of the headset by pressing the appropriate buttons. On both versions, this will require you to touch the touchpad and hold it for a few seconds. At the time of shutdown, the device will be highlighted in red and white.
  • When the AirDots turn off, you will need to press the touchpad again and hold for 10-15 seconds. At this moment, the case will again begin to be highlighted in different colors, after which the lights will go out. You need to keep pressing the key until each of the headphones is highlighted 3 times. After completing this procedure, the pairing between the headphones will be reset.
  • Next, you need to put the headset in the charging case, hold it there for a few seconds and then take it out again.
  • Wait for air dots to automatically turn on and sync between left and right earbuds.
  • While the white signal is lit on the right earphone, you need to turn on Bluetooth on your smartphone.
  • Press the search button for Bluetooth devices and find the necessary airdots in the list of devices, it is obligatory to connect to the right dots.

Important! For the initial connection to a mobile phone, always use the right earphone, as the system cannot connect using the left dots. This is due to the presence of the “Mono mode” function, which allows you to listen to music through only one sound element.

Noise canceling issues

Important! This recommendation only applies to the Pro version with active noise cancellation.

If only one earphone works in a Xiaomi device, then most likely the problem lies in the noise reduction function. Every wireless headset has a touchpad that lets you do the following:

You can activate the noise suppressor with a long, simultaneous press on the touchpad of both headphones (about 3 seconds).

  • Remove the left earbud from the charging case.
  • Connect your AirDots headset to your mobile device. To do this, press the physical button on the panel until the light comes on.
  • After that, one earphone will be paired with a smartphone.

Important! While using mono mode, the pairing between the headphones will be disconnected. To use stereo again, you will need to reset the connection in the phone settings, and return the headphones to the factory configuration. Next, you need to connect exactly the right airdots to the device. Only in this sequence will it be possible to activate the stereo mode.

If there is a problem with pairing the left Redmi Air Dots earbud, it is recommended to use the instructions above. In the event of a breakdown of the wireless headset, the only way out is to contact the service center.

How to troubleshoot headphones

First of all, you need to understand the nature of the failure in order to understand what is advisable to do next. The fault can be different, so you must first determine what caused the problem.

See also  How to enable sound effects on Xiaomi

Main aspects of diagnostics:

  • Make sure that the headphones are not connected to another gadget. When removed from the case, a white indicator slowly blinks on the right element, which goes out after connection. If he blinked a couple of times and went out, then the pairing happened with one of the devices that was used earlier. To solve the problem, you need to turn off Bluetooth on the second gadget or turn off the headphones in its settings.
  • Check if the devices are charging normally. Here the problem may be with the case. one of the spring-loaded contacts sometimes fails, you need to inspect them and make sure that the elements are at the same level. Sometimes a mote gets on the earphone contact and it just does not connect. Rarely, but there are problems with the case itself or the battery inside, most often this is observed in products that have been used for a long time.
  • If only one element stopped working, the most common causes are described in the section above. But there may be other options, for example, damage to internal parts due to a strong impact or fall. Often water gets inside, which also leads to the failure of the product. Therefore, you need to make sure that the condition of the earphone is normal, and if there are obvious signs of damage, it is unlikely that you will be able to fix the problem yourself.
  • Be sure to check the smartphone, tablet or other gadget to which the headphones are connected. It also happens that a software failure is to blame, when pairing spontaneously turns off or there are other problems that interfere with normal operation. Often reconnecting or turning off Bluetooth for a while helps.

By the way! If everything is in order with the case, but the earphone still does not charge, when putting it back in place, you should simultaneously press the button on it. After a second, you can release it, after which charging proceeds normally. This feature is quite common.

Why are Mi true wireless earphones not syncing

When considering questions from Web users who are interested in what to do if the Mi True Wireless headphones are broken, it is easy to understand that in most cases, failures are observed precisely with synchronization. That is, only one element does not work. left or right.

First of all, it is worth understanding the principle of operation of the device. The system is quite simple. there are two headphones, but one of them always acts as the main one. Most often this is the right element, although sometimes it is the left one, but very rarely. That is why the left earpiece almost always does not work. The bottom line is that when removing devices from the case, only the right unit establishes a connection with the phone. And the left one, in turn, connects to it and synchronizes for normal operation. It is with this aspect that problems arise.

It is not difficult to figure out the reasons that one of the elements does not work, because it is almost always one of two options:

  • Software failure. It can be caused by anything and happens even in the most expensive and reliable devices. all settings get lost and the system does not work correctly. In this case, you need to remove the headphones from the phone, reset the settings and reconnect. This process is described in detail below.
  • User error when in the menu he connects not the main right, but the left earpiece. If in the menu when pairing devices, not one line pops up, but two, then most often there is an “R” or “L” designation at the end. And if you choose the second option, the phone will always connect only with an additional earpiece, and the main one will not work, because the connection was not made through it. In this case, you just need to go to the menu, disable the erroneously selected item and connect the correct one.

Important! Do not exclude the possibility of a factory marriage, it also occurs, although quite rarely. But such a problem manifests itself shortly after purchase, so you can replace the product under warranty.

Causes and solutions if one or both Mi true wireless earphones do not work

The situation when the Mi True Wireless earphone does not work or both elements are not connected is not uncommon. Despite the fact that the level of product quality is generally not bad, a huge number of devices are produced and problems periodically arise. Fortunately, most of them are easy to solve on your own. Therefore, do not rush and throw away the headphones, for starters, you can try some repair recommendations.

Mi True Wireless earphone not working. how to fix the problem

This manual is relevant for all wireless products from Xiaomi. It can be used when Mi True Wireless Earbuds Basic 2 or other model does not work. First of all, you need to remove the device from the connections on the gadget:

  • Go to the Bluetooth settings by clicking on its icon and holding it for a while. There, find the tab “My devices” and click on it.
  • Find headphones in the list, then click on the gear image or the letter “i”. Select the “Delete” item (in some models it is called “Forget device”).
  • If there are two headphones in the list. right and left, you need to turn off both.

On computers and laptops, this is done in a similar way. You need to go to the properties of the wireless connection, find the list of connected devices and remove the necessary items.

Resetting the settings on the headphones themselves can occur in different ways. Two methods should be considered, which are almost always suitable.

  • Carefully remove the devices from the case. Press the buttons on both at the same time for at least 20 seconds.
  • Put back in the case literally for 10-20 seconds.
  • Remove and connect to your smartphone or other gadget again. If both headphones are listed, always choose the right one (denoted by the letter “R” at the end).

The second option should help if the first didn’t work:

  • Remove the devices from the case, hold down the buttons for 5-7 seconds until the red light turns on and goes out. This is a signal that a shutdown has occurred.
  • Then press again and this time hold until the beep sounds twice. It reports that the reset was successful.
  • Put in the case for half a minute, then remove and reconnect to the device.

If everything is done according to the instructions, the headphones are removed from the smartphone menu and successfully rebooted, but when you reconnect the problem does not disappear, most likely there is a hardware malfunction. It is unlikely that it will be possible to eliminate it, in this case it is easier to buy a new set.

What to do if there is no sound in one earphone

Most often there are 4 probable causes that are easy to check in order to decide on a repair or adjustment. They are presented in order of prevalence. from the most common situation onwards. Therefore, it is also better to diagnose in order:

  • The earphone just won’t turn on. Under normal conditions, the device will automatically start when it is removed from the case. But it often happens that the inclusion of the left element does not occur and only the right one plays. In this case, you need to manually start it by holding the button for 5 seconds until a light signal appears. Usually, the earpiece “falls off” not on an ongoing basis, but from time to time, the fault is due to minor malfunctions.
  • Out-of-sync is also not uncommon and can cause one earpiece to stop functioning. There are two main reasons: incorrect connection, when the left one is chosen instead of the right one, or long-term use of one non-primary earphone, when only the left one is specially turned on, and then the elements are not synchronized with each other. When operating only one node, it is better to use the main (right): as practice shows, in this case, failures subsequently occur much less frequently.
  • One of the headphones does not charge in the case. In this case, when setting up for charging, you need to press the button. It helps if there is a crash.
  • Malfunction of one of the units. There can be anything. a fall, moisture getting inside, broken contacts due to impact, failure of the battery or speaker. If obvious damage is easy to detect, then only a specialist can identify the breakdown. Often repairs cost such a sum that it is easier to purchase a new set.

Other causes are practically not found, so troubleshooting is not as difficult as it seems at first glance. When one Mi True Wireless or other models from Xiaomi does not work, the above recommendations will help you find and eliminate the cause. It is enough to understand the process once, so that later you can easily solve most problems on your own.

We tell you what to do if one Xiaomi AirDots earphone works

Many users of the popular Xiaomi Mi AirDots Youth Edition and Redmi AirDots (Mi Earbuds) wireless headphones often face the problem of sound loss in one of the headphones. The reason for this lies in the mechanism of the headphones: first, the right earpiece connects to the left one, picks it up, then already shows a signal of readiness for pairing with the phone. Sometimes, due to improper use, an attempt to turn on the device when it is discharged, or for other reasons, out of sync occurs. when one earbud can’t detect the second one.

An elementary reset of the headphones to the factory settings helps to solve the problem. The procedure is very simple.

First, disconnect the headphones from the phone. To do this, go to Settings on your smartphone, then go to the tab “Bluetooth”. In the list of paired devices we find the name of your headphones. If you have Mi AirDots they will be called “Mi AirDots BASIC_R”, if you have Redmi AirDots, respectively “Redmi AirDots BASIC_R”. Next, next to the name of your headphones, click on the arrow, and click on the button “Cancel Pairing” (forget device).

Next, to reset Xiaomi Mi AirDots, you need to remove the headphones from the case and hold the touch panels on both headphones for about 30-40 seconds. First, they will turn on and flash with a white indicator, then after 10-20 seconds the indicator will alternately light up in red and white, and finally, after 10-20 seconds, the indicator will again flash in red and white and turn off. This means that the headphones are completely reset.

We put them in the case for 3 seconds, take them out of the case again and wait until the left earpiece synchronizes with the right one and emits a short connection signal, after which you can initiate the connection to the phone again.

With Redmi AirDots, the situation is similar. First, disconnect the headphones from the phone, then do a full reset by holding the control buttons on both headphones for 30-40 seconds and wait until the indicator on the headphones flashes red and white twice. After that, we put the headphones in the case, take them out and wait until the left earphone connects to the right one and emits a connection signal.

If, after the reset, the phone sees the left and right earbuds separately, we recommend putting them in the case, then take out only the right earpiece from the case and connect it to the phone, and then take out the left earphone and wait until the earphones are synchronized with each other.

If the headphones failed to sync the first time, try resetting again, in 99% of cases this fixes the problem.

If after the steps the headphones have not been synchronized, contact the store where you bought the headphones.

Xiaomi wireless headphones one earbud does not work. what to do?

Xiaomi wireless headphones are one of the most popular and in demand in today’s Russian market. Combining a fairly reasonable price and decent quality, they are in high demand among thousands of buyers, dispersing, figuratively, like “hot pies”. Having bought a pair of earbuds, the buyer wants to enjoy high-quality sound, but then an unpleasant surprise awaits him. one of the headphones does not work. The user tries to somehow connect the earpiece, but nothing happens, and it is not possible to achieve full sound. What to do in this situation, and why one of the headphones does not play with Xiaomi wireless earbuds. we will tell in our material.

Why Xiaomi wireless headphones do not work one earbud

The problem in which one Xiaomi wireless earphone works, and the second does not work, occurs as when connecting new headphones. So in the process of using headphones for a period of several months. Usually, the headphones simply do not connect to the phone together (both headphones, R and L, are available for connection in the phone). When you try to connect the R earphone, only the right one works, and the left one is silent. When you connect the left earbud. everything is repeated exactly the opposite.

In the case of headphones used for some time, one of the headphones (usually the left one) simply turns off during the operation of the earbuds. After a while, it may work again. But there are also cases when an attempt to somehow revive an earpiece that has stopped working ends in failure.

The causes of dysfunction usually boil down to the following:

  • Cheap electronic filling of headphones. The cheapness of headphones forces the use of components of not the highest quality to create them. They are often not able to keep in touch for a long time, and any external sources of interference can upset the connection of the earbuds with each other;
  • Incorrect connection of headphones by the user. The owner of the headphones took them out of the case, and without waiting for their synchronization, tried to immediately connect the phone to the left earpiece. The name of which in the list of Bluetooth devices usually contains the letter (L). Accordingly, the right earpiece cannot be connected in this situation;

The headphone synchronization procedure itself usually consists of connecting and synchronizing the main right earpiece with the left one. After that, the right earphone shows a ready-to-pair signal with the phone.

In case of problems with the connection of one of the Xiaomi headphones, it is recommended to follow a series of steps, which we will discuss below.

Reset your headphones to factory settings

The most effective way to fix the problem where only one earbud works on Xiaomi wireless earbuds is to reset the headphones to factory settings.

xiaomi headphones One earbud does not work How to do

    Put your headphones in the box and make sure they are charged. There are regular cases when one earphone is discharged faster than the other, and the user perceives the discharged earphone as a problem. Put the headphones in the box and charge them both (the box must also be charged);

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE