Xiaomi Redmi AirDots Headphones Not Synchronized

Factory reset

Hard reset. hard reboot, after which the device is completely restored to the factory state. A reset fixes system problems and allows you to customize your gadget from scratch. It is recommended to use this operation if the left earbud is not connected to the right one and the sound comes from only one ear cushion.

  • We take out the headset from the case and clamp the panel until the red indicator appears.
  • Press the button again and do not release it for 40-50 seconds. The lights should blink red and white several times.
  • We place the earbuds in the case and take them out after a few minutes to re-pair with the phone.

One earbud disconnected

When the sound does not come from just one earpiece, the situation is more favorable. A system crash usually occurs, resulting in an out of sync. We have already described in a separate manual how to return binaural mode. Let’s duplicate the basic information here.

Manufacturing defects

Also watch out for fakes. A fake gadget doesn’t function well, looks unpresentable and breaks down very easily. Check out our article on checking the originality of headphones.

AirDots won’t turn on

Headphones from Xiaomi are very comfortable to use, because you do not need to use wires to connect to the phone and further listen to music. But with wireless headsets, other problems often arise. The main problem is desynchronization, but also AirDots may not turn on at all. What to do in this case and when to go to the service center. now we will tell you.

Xiaomi Redmi AirDots Headphones Not Synchronized

Mechanical damage

After being dropped from a great height or in water, AirDots may not work at all. Check your device for cracks, chips and scratches. Unfortunately, it is impossible to cope with mechanical breakdown, when a part is beaten off / damaged, at home. Only an experienced master will help.

Why the headphones don’t respond when turned on

First, let’s take a look at why Redmi and Mi AirDots won’t turn on at all. Most often this indicates a serious breakdown, in which an appeal to the masters is required.

Full discharge

The most harmless reason is the usual discharge of the battery. The case must be connected via USB to a power source, and then place the ear pads in the “sockets” for wireless recharge.

The dots should turn on automatically after being removed from the case, but this will not happen if the docking station is discharged: you will need to manually turn it on by long pressing the buttons. For the same reason, the earbuds may not turn off on their own in the case, so always check the charge level.

Correct synchronization

  • Disconnect AirDots from the device and remove the model from the list of Bluetooth devices if pairing has already been carried out before.
  • Hold the key for 5 seconds until a red flashlight appears, release and hold it for another 10 seconds. We place the earbuds in the docking station, after a minute we take it out and turn it on in turn.
  • As soon as the right earphone starts blinking white, find “AirDots BASIC_R” in the list of Bluetooth devices and connect.
  • Now it remains to connect the left insert to the right insert by pressing the button on it.

Similar procedures are suitable for the more expensive Xiaomi AirDots Pro headset, only there actions need to be carried out with a case on which a special control button is located.

We found out the main reasons why Bluetooth headphones may not turn on. If none of the described method helps, contact the service center as soon as possible.

Because of which only one earphone can play?

Why Xiaomi headphones can start working one at a time? The reason for the problem is that they cannot sync. Communication between the right and left earphones and the smartphone stops working.

This is caused by various reasons, for example, a complete discharge of one AirDots. In addition to a complete lack of connection between the headphones, they may not connect correctly. This can cause the audio to become out of sync, making it impossible to listen to music. Therefore, the problem that has arisen will have to be resolved immediately.

How wireless headphones work

A wireless headset relies on receiving data from a device through a variety of data transfer methods. It can be radio communication, infrared receiver, Bluetooth connection. Xiaomi wireless headphones use the latter method, which is due to the simplicity and reliability of the connection and ease of use.

Xiaomi AirDots

Many owners of Xiaomi AirDots headphones are familiar with the problem when one earbud does not work. You can easily fix this problem yourself. How to do this, we will tell you below.

How to solve this problem?

The problem is solved very simply. you need to synchronize the headset by performing a full reset of the headset.

To reset Xiaomi wireless headphones, you need to turn them off. Pinch the touchpads and hold them until the lights turn red. Press the panels again and hold for 30-50 seconds. AirDots should turn on (you will see by the blinking white indicator), after 10-20 seconds the lights will turn red and white and blink twice. Keep the buttons pressed until the lights go out and then flash a few more times. This is a signal indicating the successful completion of the repair.

Place the discarded headset in the case for 5 seconds and take it out. Synchronization starts. When the left earbud can find the right one and connect, try connecting to the phone. If the headset works, you will hear stereo sound.

This method works with both Mi AirDots and Redmi AirDots. In the case of wireless headphones of the Redmi line, you need to wait until they beep twice, all other points of the instructions remain unchanged.

After a hard reset, a situation may arise where the phone sees both earbuds as two separate devices. In this case, connect the right earphone, wait for it to start working, and press the button on the left. Both earbuds should sync.

There is another way to make both AirDots connect. This procedure is also very simple and does not take much time. The main thing is not to rush and follow the sequence of actions:

  • remove the headset case, close it and make sure it is charged;
  • if the battery is charged, take out one earbud;
  • wait for the earphone to turn on automatically and turn it off forcibly with a long press;
  • hold the panel and hold it until the red indicator turns on;
  • pull out the second earpiece and do the same with it in the same sequence;
  • put the headset with glowing red indicators in the case.

After these manipulations, the headphones should be synchronized and work in stereo mode.

If you failed the first time, repeat the procedure. Clearing Bluetooth app data on smartphone can also help.

Automatic start

No more manual power-up and complex configuration. Xiaomi Redmi AirDots wireless headphones automatically turn on and pair with each other when you take them out of the charging case.

Features:

  • Bluetooth 5.0 support
  • Each earbud weighs only 4.1 grams
  • Comfortable and secure fit
  • Battery life up to 12 hours (with charging case)
  • Multifunctional button to control music and calls
  • DSP noise canceling technology
  • Built-in microphones for hands-free communication
  • Support for voice assistants (Siri, Google Assistant)

Xiaomi Redmi AirDots are stylish wireless headphones that share your passion for freedom and music. They are designed as compact, lightweight and functional as possible to accompany the owner throughout the day. With a charging case and efficient Bluetooth 5.0, they deliver up to 12 hours of remarkably clear and rich sound. Ergonomic design and simple controls will add comfort to your every day. Enjoy your favorite music without limits.

Xiaomi Redmi AirDots Wireless Headphones (Black)

Stable communication without any wires

Redmi AirDots use the latest Bluetooth 5.0 wireless standard. It features low power consumption, extended range and greater signal stability. And support for TWS technology ensures automatic pairing between the earbuds for surround sound in any situation.

Stunningly clear sound

The headphone design and specially designed 7.2mm driver are optimized for more accurate mid and low frequency reproduction. This makes them sound deeper and more powerful, and the sound of songs more energetic and detailed.

Convenient control and support for voice assistants

Discover new control possibilities with Redmi AirDots. The multi-function buttons located on the earbuds respond to the slightest touch and follow your instructions exactly. Switch tracks and answer incoming calls without wasting time searching for your smartphone. Or call your virtual assistant (Siri, Google Assistant) to schedule a meeting, add an item to your shopping list, check the weather.

Full day of battery life

Be truly mobile. Each earbud has its own separate battery, giving it up to 4 hours of continuous music playback or phone calls. Together with the charging case, the total operating time of the headphones increases to 12 hours. With such a margin, even long trips will not be a problem.

Less is better

The compact and almost weightless Xiaomi Redmi AirDots are designed so that your favorite music can accompany you everywhere. Each earbud weighs just 4.1 grams and fits precisely to the curves of the human ear for a secure and comfortable fit. Therefore, Redmi AirDots do not fall out even during active movement or jogging.

Charging case. simple, convenient, practical

It’s easy to store and charge your earbuds. The small case that comes with them allows you not to depend on stationary power sources and reliably protects the headphones when you are not using them.

Charging case. simple, convenient, practical

It’s easy to store and charge your earbuds. The small case that comes with them allows you not to depend on stationary power sources and reliably protects the headphones when you are not using them.

Features:

  • Stable signal and fast pairing
  • Bluetooth 5.0 wireless connection
  • Supports low latency audio game mode
  • Each earbud weighs only 4.1 grams
  • Battery life up to 12 hours (with charging case)
  • Support for voice assistants (Siri, Google Assistant)
  • Operation with multifunction buttons on earbuds

Stunningly clear sound

The headphone design and specially designed 7.2mm driver are optimized for more accurate mid and low frequency reproduction. This makes them sound deeper and more powerful, and the sound of songs more energetic and detailed.

New game mode

Also, the new version of wireless headphones has a so-called game mode with a minimum delay in audio transmission. It is activated by triple-pressing the button on the earbud and ensures perfect synchronization between visuals and sound while playing.

Less is better

The compact and almost weightless Xiaomi Redmi AirDots S are designed so that your favorite music can accompany you everywhere. Each earbud weighs just 4.1 grams and fits precisely to the curves of the human ear for a secure and comfortable fit. Therefore, AirDots do not fall out even during active movement or jogging.

Full day of battery life

Be truly mobile. Each earbud has its own separate 40mAh battery, giving it up to 4 hours of continuous music playback or phone calls. Together with the charging case, the total operating time of the headphones increases to 12 hours. With such a margin, even long trips will not be a problem.

Headphones Xiaomi Redmi AirDots S

Redmi AirDots S is a modified and improved version of Xiaomi AirDots compact wireless headphones. They are more stable and faster pairing with mobile gadgets, as well as the presence of a game mode with reduced latency. What makes them even more comfortable to use. Otherwise, these are the same stylish and functional headphones with ample opportunities, excellent autonomy and well-thought-out ergonomics.

How to sync Xiaomi AirDots headphones with each other

There is a real boom in wireless Bluetooth headphones these days. There are many models of various brands on the market. The characteristics and for them, of course, are different. It is safe to say that Xiaomi AirDots are one of the most popular models today due to the capabilities, sound quality and more than affordable price tag.

However, the most common problem faced by Air Dots owners is headphone desynchronization. In other words, situations arise when Redmi AirDots (or any other similar Xiaomi model) do not connect with each other, and only one of the “plugs” remains working. Of course, in this regard, users are interested in how to solve the problem. There is a solution. The user will need to re-pair between the right and left headphones.

How to sync Xiaomi AirDots headphones

It doesn’t hurt here to share step-by-step instructions on syncing headphones:

Insert AirDrops into the charging case, each earphone into its own socket. Make sure the case (aka charger) is charged.

Delete the headphone connection information from the “Bluetooth” menu of your smartphone.

Take two headphones out of the case, turn them off. To do this, hold down the control button on each of the “earbuds” for 5 seconds.

Now you need to perform one more “reset” (The first was to remove the device from the list of Bluetooth devices connected to the phone). At this stage, you need to reset the connection between the two Air Dots headphones. To do this, press and hold the control buttons on each of the dots for 20 seconds. The status light should flash twice: first after 10 seconds and then after 20 seconds. Do not release the buttons until you see the LED blink a second time.

Turn on the headphones. To do this, hold down both control buttons for about 5 seconds. You can turn on in another way: just place the “ears” in the case, and then remove them from there. When you take Xiaomi AirDots out of the case, they turn on automatically.

After this restart, you will see the status indicator on the right earbud blinking white. At the same time, the indicator on the left earphone does not light up and remains unlit. This means that there is a connection between Air dots, and the right earphone can be paired with a phone.

The last step is to pair the presenter (right) AirDots with your mobile device, after which you can enjoy music, audiobooks or podcasts, and receive incoming calls through the headset.

Why when connected to a phone, the headphones don’t pair with each other

Sometimes AirDots sync individually, that is, they do not join one another, but work with a smartphone. The reason is that the left earbud “loses” the right one, so the pair stops working together. What to do?

  • Reset Bluetooth settings for Xiaomi AirDots. Start by turning off each earbud. On each, hold down the buttons (touch or physical) until the indicators turn red.
  • Press the buttons again, now for 30-50 seconds. First, the headphones will turn on, the white light will turn on, then after 10-20 seconds you will see that the indicator glows either red or white (2 times). Continue to hold the buttons, the indicator will blink a few more times and go out for a few seconds. After that, it will blink twice more and the headphones will be reset.
  • Take the headphones out of the case. The left one will start looking for the right one, synchronize with it, and then the “dots” can be connected to the phone.

Another reason for “desynchronization” is the wrong procedure for connecting the headphones to the smartphone. In this case, instead of the right “ear”, the left one is connected first to the device, and starts working in mono mode. The right one cannot be connected. To connect both AirDots, you will have to do a factory reset and a new connection, as described in the step-by-step instructions above (see “How to sync Xiaomi AirDots headphones”).

How it works?

Wired devices provide reliable communication between channels. Wireless headsets form a scheme in which there are 3 independent nodes at once:

  • Smartphone.
  • Right module.
  • Left module.

If there is no connection between the left and right channels, then the smartphone works with only one of them. And I can’t listen to music normally.

AirDots headphones won’t sync. What to do?

AirDots headphones won’t sync, possible reasons, and setting the correct parameters.
What users write about wireless headphones with this problem:

  • My AirDots earbuds work individually and don’t sync with each other.
  • Music plays only in one AirDots earphone, although both worked earlier.
  • Both AirDots connect, but only one is playing.
  • Music plays differently in Bluetooth headphones, what is the reason?
  • AirDots headphones won’t sync

AirDots wireless headphones have several Bluetooth pairing issues. If wired headsets have a single channel failure due to mechanical damage to the cable or contamination of the connector, then for wireless headsets, the reason may be a violation of synchronization.

Microcracks in the screen are fraught with a break in the power circuit. If this happens, then you will have to change the screen. Fortunately, in China they are several times cheaper.

It happens, and the malfunction lies in the incorrect installation of the SIM card or flash drive. Try to take them out and check what will happen.

A map with problems can be repaired by restoring broken clusters using a PC.

If shaken, a poorly positioned plug from the display may fall out. What will entail the disconnection of the image transmission module, or partial disconnection.

Remove the cover of the device, and plug the ribbon cable into the socket. If it is inserted, take it out and insert it. In this case, do not forget to disconnect the power cable from the battery.

When the quality of the pixels is determined, and among them it was possible to find “burnt out”, you can start looking for applications that will correct the situation:

  • JScreenFix is ​​easy to use, you need to use the Fix Stuck Pixels button to get started. The developer promises 30 minutes to complete this operation, but the service center masters recommend leaving the devices. Not less than 10-12 hours for a more complete check;
  • Pixel Fixer: Another program similar to JScreenFix. To restore pixels, you also need to click on the green button;
  • Dead Pixel Treatment: The platform does more than test a mobile phone for dead pixels. And then “heals” them, but at the same time reveals other defects in the display.

What to do if AirDots headphones won’t sync?

You will have to reset AirDots, and if necessary, the pairing on the smartphone. You need to do the following:

We hold until the red LED indicator lights up.

Let go and hold it again for 30-40 seconds.

We are waiting until the white indicator starts working. After that, the light will start blinking white and red (alternately). Keep holding until the LED turns off a couple more times.

If you have Redmi, you will have to reset differently:

We hold the keys for 40-60 seconds. We are waiting for a double signal.

If after that the synchronization does not work, then connect the earbuds in turn to the device. We connect one, then turn on the other and wait for the connection. If this does not help, restore the original Bluetooth settings on the smartphone.

Actions how to proceed in such a situation

Changing graphics to low resolution will help. You want to limit the power consumption mode. Do not continue to play when the phone charger is on. Remove the phone from the case, allow general ventilation of the case. Disconnect the phone, remove the battery.

If the smartphone has been in a damp room or has been exposed to moisture. This is especially true for the USB input, and leakage into the smartphone. Oxides can lead to current leakage and this can heat up the machine. To fix, you need to clean the USB. Take a thin stick and wrap a cotton swab around it. Dip it in white spirit or alcohol, and wipe the contacts at the entrance.

If water gets inside, then you need to disassemble Meizu. And, carry out the same operation with the contacts that are attached to the board. But before doing this, disconnect the battery cable to avoid shorting.

If the microphone does not work for Meizu M8, for this you need to do the following:.

Open the security settings, look for root access and press accept, restart the device. Open the “phone” and enter this combination ### or ### Scroll to the right and find “Hardware Testing”. audio. Audio Playback set the Heaset PGA value to 160 Exit the menu and reboot the phone.

Also, programmatic methods can be applied. But, they can only help if there are no faults in the device itself. This method is one of the simplest, we open the settings on the mobile phone. And, select the command “reset settings”. Please note that this means deleting all data from your smartphone.

To not disturb the stripes on the Meizu M8 screen, you need:

  • Make sure the integrity and reconnect the display module loop;
  • Replace the screen completely if there is real damage;
  • Update Flyme firmware and shell.

In the first situation, contact could simply be broken. The connection came loose due to a shock, the contacts are clogged, or the display was not fully connected at the factory.

In the second case, it is recommended that you contact a warranty specialist or an independent workshop. The third option indicates that you bought a phone with an outdated software version. Which has flaws fixed in updates.

To carry out this procedure you need:

  • Enter the device settings;
  • Select the item “about phone”;
  • In the submenu, you will need to select the check for updates. when you turn on Wi-Fi, everything will start downloading;
  • The device will reboot.

The appearance of stripes during use can be eliminated immediately after purchase by updating. This does not void your warranty. Unlike a full flashing or self-repair during the same period.

A banal method, it’s just to log into your account on the device.
Click below on the item “Delete mi account”.

In this case, the account will be unlinked from the mobile phone. There will be no more message when the device boots.

If Xiaomi has lost sound, you should first check the audio settings. If there is an active mode (with sound), then we continue to look for the problem.

Needed. clean the headphone jack

If the headset icon is lit on the screen of the xiaomi smartphone, and the headphones are not connected, then the contacts have shorted. Therefore, the sound is transmitted to the headphones, even though they are not physically connected.

After cleaning, restart your phone.

If during a call the interlocutor hears you poorly, then this function may be disabled. Go to the settings “sound and vibration” and move the slider “noise reduction” to the value “on”.

If it is activated, and crackling and noise during a conversation are present, then try turning off the function.

The built-in mobile assistant can also interfere with normal microphone operation. Go to the “settings” menu, search for “Google”. Next, turn off the “voice recognizer”.
Reboot xiaomi phone.

Account reset can be done using Xiaomi support.

To do this, you must have documents on your phone. to confirm that it is not stolen.

How to talk to Xiaomi tech support.

Go to your type mail service and log in.

Click create message. In the first line, we write this address: mishu@xiaomi.com Or this one: service.us@xiaomi.com In the subject you can write (Unlocking my account). You must write in English. Use online translator.

Next, we write what is required. I want to reset mi account on Xiaomi redmi 6a. This procedure is long and can take 2. 3 weeks

We choose English and any country;

We make an Internet connection using Wi-Fi or cellular data;

Go to “Privacy Policy” and select any piece of text. On the right, click on the three dots, “Web Search” and “Google App”. Next, we can go to the settings by clicking on the “Settings” entry. We are looking for the item “About Phone” and click on it.

After entering, click on the “Software version (Miui version)”, which you need to quickly click several (about 5) times, until a notification about the granting of “Developer rights” appears. We return and go to “Second Space”, and then “Turn on second space”.

A second space is created here and the device is already quite ready for use. Nevertheless, after the reboot, everything will be reset and you will have to do everything again, so we continue. Go to the settings, then “About Phone”, “Additional Settings” and “Developer menu”. Move the toggle USB Debugging to the enable position.

Connect to the computer using USB and launch Switch. Download “Minimal Adb and Fastboot” and turn it on. We go to the first desktop, and on the computer we type “adb devices”. Here we enter the following command: adb (input command) shell pm uninstall (parameters) –k –user 0 (values) com.xiaomi.finddevice (connection with the server);

Delete “Find my phone”.

Nuances after such a decoupling.

After that, the gadget is ready for full use: you can go online, use various programs, etc.

However, it should be noted that it will not be possible to use Xiaomi services. Which is due to the lack of the account itself. On the Xiaomi account, there are many complaints from users, due to poorly executed software, and it is quite logical that it is deleted.