Xiaomi poco m3 won’t turn on

Table of Contents

An error like “fastboot error bad component name” in Xiaomi Redmi 5a indicates a system failure of the device. You can return to standard mode only by formatting the contents of the gadget. Before starting the procedure, it is recommended to remove the memory card. To fix the bug, you should:

  • Switch to mode This is done in one way: by holding down the power and volume keys.
  • Here you should click wipe data / factory reset. Yes, it will return to the original settings.
  • Next click “wipe cache partition”.

If the problem persists, you need to reflash the gadget. All files will be deleted from the cloud itself. Apps will need to be reinstalled.

To eliminate this error, it is recommended to turn off the fast mode.

Fastboot not working: why and how to resume work

If after activating Fastboot it is not possible to return the gadget to its previous mode, it is recommended:

If this did not happen, only 1 reason is possible. a failure in the program. Only a return to the original settings will help here. To execute it, you should:

  • hold down the power and volume keys again;
  • the device will boot into recovery mode;
  • in the drop-down menu from the list, find the wipe data / factory reset subsection;
  • after confirming the selection, all information about the user will be automatically deleted. The settings will be reset to the initial ones and the device will reboot. This procedure takes at least 15 minutes.

Important! A hard reset leads to the complete removal of user files: downloaded applications, as well as all photos, videos and music will be deleted.

Also be prepared to reset your contact list and delete all SMS messages. This method is recommended only for users who have a backup of the required data.

How to solve this problem

Initially, you should check if the device turns on in standard mode. We hold down the required buttons, then scroll through the first items displayed on the screen. We are looking for the item “normal boot”, click on it with the volume key.

If the gadget turns on quietly in the “normal” mode, then there is no failure in the system.

If, after synchronizing with a PC and installing a new application, when the USB is disconnected, the fastboot software still does not work, it means that they forgot to deactivate this option at the service center. You can fix the problem yourself:

  • After entering the “normal boot” mode, visit “Settings”.
  • Select “Screen”.
  • Here, find “Quick Boot” and uncheck the box.

So, the mode will be turned off and will no longer disturb the user.

This is a very useful mode. However, there are times when the mode is not enabled and the fastboot window does not work. Let’s look at different types of errors:

  • problems related to device firmware;
  • accidental activation of 2 keys at the same time. volume and power buttons;
  • setting ROOT-rights of the superuser;
  • system malfunctions.

In any of these errors, the following will happen on the smartphone screen: the Android icon is displayed and a message appears with information about the system settings of the gadget.

What to do if Fastboot does not turn on

Fastboot is activated in every Xiaomi device. It is launched by holding down the power and volume keys. If you did everything correctly, but the mode still does not turn on, it is recommended to get into fastboot by downloading the adb run program on the PC.

Next, turn on USB debugging in the device settings. After that, synchronize the gadget with the PC and turn on the program. Here in the main menu you need to select Reboot. Reboot Bootloader.

The device will reboot and enter Fastboot. If for some reason the smartphone does not switch to the required mode in any way, it is recommended to reflash the gadget or wait for a new software version that will fix this error.

What to do if Xiaomi Poco M3 won’t turn on

Before you run to the workshop, try several ways to restore the phone to working capacity at home.

Why the device does not turn on: possible reasons

Unfortunately, the problems are different. there are options. And they are:

  • The operating system was updated on the smartphone, some important files were installed with errors.
  • As a result of mechanical impact, the cable was disconnected, for example, from the battery. Simply put, the phone fell and something happened to it.
  • Some applications were installed not from the official store. The device is infected with viruses. By the way, the fact that you downloaded the program from Google Play does not guarantee the absence of viruses and other problems.
  • The connector is clogged. debris, moisture got into it.

If the problem is software related, then this is better. These things are easier to deal with at home. If there is mechanical damage, then it is better to contact the master. But it’s up to you.

How to restart a Xiaomi device if it does not want to reboot

Use recovery mode. It can be activated if the smartphone is at least 15% charged. If the resource is less. it does not matter. Connect the charger. it will immediately become clear whether everything is in order with the screen.

Let’s say that the smartphone is charging. in this regard, everything is fine with it. Proceed as follows:

  • Hold down the volume up and on/off buttons of the device. The boot screen should appear. The phone will respond with a short vibration. Sometimes you need to hold down the volume down button.
  • Select Reboot from the menu that appears on the screen. There may be others next to this word. For example, to system. We focus on “Rebut”. If this word is in the menu item, it means that we need it.

Next, there should be a reboot. The phone will start normally.

Full reset

In difficult cases, it is better to return to the factory settings. For this:

The phone should start rebooting. Don’t be alarmed if this takes a long time. Usually the process takes about 10 minutes, because all user files are deleted from the device and standard files are downloaded. those that were “filled” by the manufacturer.

If these two options do not help, alas, most likely you will have to contact the service center so that the service center employees check if there are any mechanical problems with the smartphone.

s

Комментарии и мнения владельцев

hello Xiaomi poko M3 discharged to zero turned off, I put it on charge, it doesn’t react, left it for the night to charge in the morning, I looked all the same, the phone is turned off for charging, it doesn’t respond and doesn’t turn on what to do please help

Hello, did you drop it or maybe something else?

good day ! downloaded updates!! and all the phone went out and that’s it! does not turn on not like !! what to do ??

Have you tried everything in the article??

Tried. Doesn’t respond to buttons at all. They didn’t drop it. It just didn’t turn on after a reboot. Was on charge all night. No visible changes.

I found a solution to my problem, I had a problem that the phone was charging, I put it on charge and it turned on but did not show that it was charging and it turned off and so it did every 3 seconds, in short, hold down the power button longer and everything will pass. so it went for me, for those who are faced with the same problem as me

Hello, I decided to restart the phone, it had more than 50 percent, it turned off and does not turn on, it does not respond to charging, the screen is black, what to do?

Hello, try first to do what is described in the article

The situation is as follows: I somehow decided to update the phone. It downloaded the update and shut down. Did not react either to charging or to pressing the block button. I tried to use the methods that are indicated in the article. Everything is empty. Across

For two weeks I tried to revive the phone again. I pressed the lock button, reacted, showed the absence of a charge. I started charging it. He turned himself on. Literally worked for an hour and hung up. Then I decided to reboot it. And here again the same state does not react to anything. The methods don’t work either. The next day I picked it up again. Also pressed the block button reacted. Connected to charger. Charged up to 20%. I tried to turn it on myself by holding the block button. And again, this is an inanimate state. Also the methods don’t work. What to do?

How to connect and set up Xiaomi Mi Range Extender Pro Wi-Fi signal booster

In order for the signal to be consistently strong, Xiaomi offers the Xiaomi Mi Range Extender Pro Wi-Fi amplifier. Let’s figure out how to connect and configure it.

What should be done

Wi-Fi Xiaomi Mi Range Extender Pro is a small device that must first be connected to power. First, read the instructions. just in case. We do not always do this, which can cause problems. For example, with the operability of the device or its replacement under warranty.

The next step is to download the proprietary Xiaomi Mi Home application. After installation, run it. Next. register or log in to the application.

Follow-up algorithm:

  • Click “” on the top right corner of the screen to add a new Xiaomi device.
  • Choose from the proposed signal amplifier.
  • Specify which Internet access point you need to work with. make it more powerful. You will have to enter a password for it. Try to remember or restore it in advance. You will need to wait a few seconds. The process of connecting the router to the amplifier should go through. Notifications will appear on the smartphone screen about what exactly is happening. For example: “Connected”, “Message sent to device” and so on.
  • Specify the room where the amplifier is located. The application will recommend the room, but you can ignore it.
  • Give the device a name.

After that, you can use the amplifier. A new access point will appear. Its name will be the same as the main one, only it will be added: “_plus” a hint that something has been added. Namely: gain. more power.

Passwords will match. Conveniently. No need to keep multiple passwords in mind. In the device settings, you can change all the specified data: network name, password.

Nothing else is required. After these steps, the amplifier should work as expected.

Usually there are no problems with Wi-Fi Xiaomi Mi Range Extender Pro. Chinese manufacturer makes quality products.

There are many reasons for the disruption of the stable operation of the device. often problems arise against the background of everyday use. According to the masters and representatives of device manufacturers, power-on failures can be associated with the following events:

  • after updating the operating system, any system files were installed with errors;
  • the device stopped loading due to viruses that got in with applications not installed from the Play Market;
  • after falling on a hard surface, the display or battery cable is disconnected;
  • the USB connector is clogged or small but harmful rust spots have appeared on the contacts due to moisture.

Immediately it is worth noting: to cope with mechanical damage on your own is not easy. During home repairs, you can inadvertently break any connections, thereby making the smartphone unrepairable. If the methods proposed below do not give a positive result, then it is recommended to contact a trusted SC for diagnostics and repair.

Force restart Xiaomi Poco M3

First, let’s look at several methods related to recovery through Recovery mode. It will be possible to get into it if the gadget is charged by more than 15%. At the same time, by connecting the charger, you can verify the integrity of the screen and the operability of the USB connector.

So, if the phone responded to the charging connection, displayed the process of replenishing the battery, then after reaching a suitable level, you can proceed to the following manipulations:

  • Simultaneously hold down the power and volume up buttons. Hold them like this until the phone starts to vibrate. The boot screen will appear and it will be followed by vibration, then the power button can be released. Important: sometimes the combination with the volume down button works, not the volume up button.
  • In the menu that opens, select the item “Reboot to system” (in some versions – “Reboot system now”).

The device should immediately go to reboot, followed by a regular download of Android. By the way, if the gadget is not charging, it is recommended to try other USB cables and chargers. It is possible that the problem lies precisely in them, and the phone is simply dead.

Reset to factory settings

After the actions described above, several options for the development of events are possible. In addition to the usual reboot and power on, the phone may turn off again or hang on the splash screen. You should not be too upset because of this, because the manipulations done helped to make sure that a number of important functions and systems are working.

Rebooting through Recovery is an option suitable for situations in which the firmware received minor failures that resolved themselves. If the violation in the operating system is much more serious (for example, after a firmware with errors), then you will have to perform a factory reset. It is important to consider: during such actions, all files are deleted from the device’s memory, including photos, videos and music.

The device should go to reboot. It can last much longer than usual (up to 10-15 minutes), after which you will have to perform the initial setup.

Additional Methods

What to do if the methods described above did not help? The gadget suddenly turned off, stopped responding to pressing the power button or charging. with a high probability the problem lies in mechanical damage. If earlier it fell or fell into the water, then it makes sense to contact a service center for diagnostics. Another likely cause is a battery failure. The main symptom is a fast discharge from 100 to 0 percent until a malfunction is detected. For smartphones with removable batteries, you can try to buy a similar one and simply replace it. If the case is solid, then it will not be possible to do without the intervention of masters.

Xiaomi Pocophone F1 stuck in boot loop and won’t turn on

Hello Xiaomi fans! In this troubleshooting article, we will show you possible solutions that you can try if Xiaomi Pocophone F1 has a boot loop issue or if you are having trouble booting.

Problem: Xiaomi Pocophone F1 stuck in boot loop and won’t turn on.

Hello! I have Xiaomi Pocophone F1. It has always worked fine. I always had a memory card jammed, and something happened to the phone. He’s like in a coma. It seems to me that something that was on the memory card erased some important file from the phone. I don’t know what it is, it just seems to me.

I can somehow charge the phone, but as soon as I connect the charger, the phone starts endlessly rebooting. I thought it was the battery. Replaced it, restarted again, and now the phone does not turn on at all. Perhaps something with the board, or with the cache. Please, help.

Solution: Troubleshooting a problem like this is not easy. There are several possible causes, so you must follow a series of troubleshooting steps to find out the real cause. Follow our tips below to fix this issue.

Forced reboot

The first troubleshooting step that you should definitely follow is to check if you can get your phone to work properly after simulating the “battery disconnect” effect. In older devices with removable batteries, one way to fix an unresponsive phone or boot loop issues is to disconnect the battery. Since the Xiaomi Pocophone F1 has a non-removable battery, you will not be able to do this. Now you can mimic the effects of this old but proven solution with a couple of hardware buttons. All you have to do is press and hold the power button and volume down button for 15 seconds or more.

If the phone boots, then the problem is solved, and if not, try this procedure a few more times. If it still doesn’t respond after that, try the following

  • First, press and hold the volume down button and do not release.
  • Press and hold the power button while holding down the volume down button.
  • Hold both keys down for 15 seconds or more.

If it still doesn’t respond after that, try the following procedure.

Charge your device

The next step to take in this case is to ensure that the battery of the phone has enough power. Be sure to charge it for at least 30 minutes or an hour before continuing. Sometimes a low battery can make your device unstable, so before you do anything, you need to make sure that there is more than enough power. Be sure to use only official charging accessories for this.

Calibration

Charging problems can sometimes be caused by a software bug. For example, charging may sometimes be unstable if the device is used for a long time without stopping. This can cause Android to lose its true battery level, which can lead to a premature shutdown. In other cases, it can also cause the phone to not charge properly. To check if your device is having problems detecting the battery level, we recommend that you calibrate its battery. Here’s what to do:

  • Discharge the battery completely. This means using the device until it turns off by itself and the battery level is 0%.
  • Charge your phone until it reaches 100%. Be sure to use the original charger for your device and let it fully charge. Do not unplug the device from the mains for at least another two hours, and do not use it while charging.
  • After the specified time, disconnect the device from the network.
  • Reboot your device.
  • Use your phone until it turns off completely again.
  • Repeat steps 1-5.

Boot into safe mode

If there is an app downloaded that is preventing your phone from working properly, you can try resetting your phone to safe mode. Any third-party apps added after the phone is set up will not run. If you can successfully boot your phone in safe mode and Xiaomi Pocophone F1 works fine, it means that there is a problem with the app. Below are the steps to boot in safe mode:

  • Your phone must be turned on.
  • Press the power button on your phone.
  • When the menu for power off, restart, airplane mode, Wi-Fi mode, etc. is displayed, release the power button.
  • Now press and hold the word Turn off on the screen.
  • Press this word until a message about Android safe mode is displayed on the phone.
  • Choose Reboot to Android Safe Mode.
  • When everything is ready, a special watermark will appear on the smartphone Safe Mode.
  • Examine the phone and check for a problem.
See also  Not supported on your Xiaomi device

To determine which of your apps is causing problems, you must restart your phone in safe mode and follow these steps:

  • Boot into safe mode.
  • Check for a problem.
  • Once you’ve confirmed that a third-party app is at fault, you can start uninstalling the apps individually. We suggest you start with the most recent ones you added.
  • After uninstalling the app, restart your phone in normal mode and check for the problem.
  • If Xiaomi Pocophone F1 still has the same problem, please repeat steps 1-4.

Booting into recovery mode

There are two things to do in recovery mode. clear the cache partition and do a master reset. Recovery Mode is a separate software environment from Android. If Xiaomi Pocophone F1 booted into this mode successfully, it means that a bug in the operating system (Android) must be the cause of the problem. Be sure to try wiping the cache partition first and then doing a factory reset if the problem persists. Here are the steps to take:

Clear the cache partition

    1. Turn off your phone. It is important. You cannot boot into recovery mode if the phone is turned on by pressing the hardware button combination described below.
    2. Boot into recovery mode with the following steps:
    – Press the volume down and power buttons and hold them together.
    – When the boot menu or logo appears, release the buttons.
    – Now select Recovery mode and enter it.
    – You must enter recovery mode.
    3. In recovery mode, click on Wipe Cache Partition.
    4. Complete this action by following the instructions on the screen.
    5. Once you’re done, exit this mode.

Reset your phone to factory settings

  • Hold down the power button to turn off the device. It is important. If you cannot disable it, you will never be able to boot into recovery mode. If you can’t turn off your device regularly using the power button, wait until your phone’s battery runs out. Then charge your phone 30 minutes before booting into recovery mode.
  • Press Volume Up and Power buttons together.
  • When the POCO logo appears, release the power button.
  • Release the volume up button when Recovery Mode appears.
  • Select Wipe Data using Volume Down to navigate and Power button to confirm selection.
  • After that select Wipe All Data. Use volume down to navigate and power button to confirm.
  • Select Reboot and Reboot to system using the power button.
  • The last step is to select OK with the power button.
  • Set up your phone again.

Repair

If the phone won’t boot into safe mode or recovery mode, or if none of the solutions above worked, chances are there’s nothing you can do on your own. In this case, we suggest that you seek the help of a professional who can physically inspect the device and perform hardware diagnostics.

Setting the date and time on your Xiaomi Poco M3

This may sound innocuous, but the first thing to check is that the date and time are up to date. If the date and time do not match with the external time, you need to adjust these settings.

Indeed, for security reasons, many Wi-Fi networks will not grant you access if the date and time on your Xiaomi Poco M3 is incorrect.

Open the “Settings” menu, then “Advanced settings” and then “Date and time”. From there, you can set the date and time on your Xiaomi Poco M3. It is best to choose automatic configuration so that this setting matches your carrier’s network.

Then don’t forget to clear the Wi-Fi cache on your Xiaomi Poco M3. To do this, go to “Settings”, then “Advanced settings” and “Manage applications”. Then find “Wi-Fi settings” and click “Clear cache”.

Check network connection on your Xiaomi Poco M3

One of the first steps when detecting problems with a Wi-Fi connection. make sure this feature is enabled.

It is often forgotten to turn Wi-Fi on or off as needed. Activating Wi-Fi on your Xiaomi Poco M3 is quite simple: all you have to do is swipe down from the top of the screen and then tap on the Wi-Fi symbol.

Another setting that should be disabled. this is flight mode. When this function is active, Wi-Fi is automatically turned off.

Indeed, with this option all internet connections are disabled.

Therefore, you must deactivate Airplane Mode on your Xiaomi Poco M3.

These two methods are the basic steps to troubleshoot a device that won’t connect.

If both methods failed on your Xiaomi Poco M3, you can try the following methods.

Check forgotten networks on your Xiaomi Poco M3

The forget network feature is designed to eliminate Wi-Fi on your Xiaomi Poco M3. This may prevent your device from accessing Wi-Fi.

To solve this problem, try deleting the network you want to connect to.

After that you can try to reconnect.

Poco M3 Dead Solutions | Poco M3 Black Screen Fix | How To Fix Dead Poco M3

To do this, simply click on the network you want to remove and select Forget. If you’re going to reconnect over the network, you’ll have to start from scratch. This includes re-entering the required password.

Make sure the router name and password are correct.

Another reason why your device cannot connect to the internet is probably because it is connected to the wrong network.

To do this, always check if your device is really connected to the network you have chosen. You can check it through Settings and Wi-Fi menu on your Xiaomi Poco M3. It will display the name of the currently used Wi-Fi network.

Once the connection is established with the correct network, double check the entered password. In the same menu, you can enter a password.

Perform a factory reset

This step. last option as it can wipe all data on the device. On the other hand, this method must be tried because a factory reset can remove all possible errors on your Xiaomi Poco M3, we are thinking in particular about possible computer viruses that can cause your Wi-Fi to malfunction. Delete absolutely all data from your Xiaomi Poco M3.

Therefore, before doing this, be sure to back up the files on the device, including photos, videos and contacts.

Then, when those backups are done, you just need to open “Settings”. Then go to “Backup and Reset” and select “Factory Data Reset”.

Then turn on your Xiaomi Poco M3 again. You can immediately try reconnecting it to the Wi-Fi network. If that doesn’t change, the last step you can take. is to entrust the repair of Xiaomi Poco M3 to an authorized specialist. Also, feel free to refer to the warranty if it’s still valid.

Limited WiFi

Another possibility when it is not possible to connect to Wi-Fi is that the maximum number of users (number of IP addresses) has a network limit. The number of users may have reached this limit and new devices like your Xiaomi Poco M3 cannot connect.

In particular, a Wi-Fi service on a campus or coffee shop usually enforces an IP address limit of 200. Once this limit is reached, other users cannot connect.

To be able to connect, you must wait for other users to disconnect from the service.

This means you have to wait until the IP becomes available.

Only after that you will be able to connect your Xiaomi Poco M3 to the network.

In this case, you, as a user of the service, cannot do anything: just wait until the IP address becomes free.

Xiaomi Poco M3 wifi problem

Using Wi-Fi through Xiaomi Poco M3 is very convenient, especially in public places or inside the house. But it is not uncommon for your Xiaomi Poco M3 to no longer be able to connect to the Wi-Fi network. We will take a detailed look at how to solve this problem.

Wi-Fi is all the more practical, does not overwhelm data consumption on your Xiaomi Poco M3 : your telephone operator, 4G or 5G, generally does not charge for Wi-Fi as mobile data.

In addition, many places offer relatively fast Wi-Fi networks.

Therefore, it is not uncommon to prefer to connect Xiaomi Poco M3 to Wi-Fi rather than use 4G or 5G cellular data service.

How To Fix A Poco M3 That Won’t Turn On

Not being able to connect to Wi-Fi with your Xiaomi Poco M3 is certainly a nuisance: we often rely on Wi-Fi networks for greedy data needs such as playing video streaming or even playing online games.

Wi-Fi is especially useful for using social networks such as. WhatsApp, Snapchat, Instagram or TikTok.

So let’s see how to fix this Wi-Fi issue on your Xiaomi Poco M3.

First of all, feel free to take a look at Google Wi-Fi Troubleshooting Help, which is often very helpful.

If the method above doesn’t work and you’re connected to a public Wi-Fi network, try restarting your device. For those of you using your own network, this method also applies to routers.

So feel free to restart your Box or modem to reset Wi-Fi.

Even though it sounds simple, this method is quite effective in solving Wi-Fi problems. Then try to reconnect to Xiaomi Poco M3. to try to connect to the internet.

Disable antivirus on your Xiaomi Poco M3

Antivirus programs are very useful to protect your Xiaomi Poco M3 from malware.

These programs are both offline and online threats.

But sometimes the antivirus can block Hotspot services. These public services can really pose a security threat to your Xiaomi Poco M3.

With an antivirus, any Wi-Fi connection can also be blocked.

To counter this, you just need to disable your antivirus while using Wi-Fi.

Proximity sensor on a Poco smartphone

The proximity sensor is one of the most important elements of a smartphone. It is he who regulates auto-brightness and allows you to turn off the backlight of the display when the user brings the phone to his ear during a call.

Unfortunately, on many phones this sensor may malfunction or not respond at all. Because of this, the screen does not turn off when making a call or starts flickering. Calibrating the proximity sensor will help solve the problem. We have explained how to do it below.

We will explain in detail how to calibrate the proximity sensor. The instructions are relevant for all Xiaomi Poco phones, including:

Enable/disable sensor

Very often, the proximity sensor does not work due to banal system failures or due to a conflict between the operating system and applications. In this case, it is not necessary to immediately resort to calibration. Try disabling and enabling the module:

  • Go to the “Settings” of the gadget by clicking on the gear on the main screen.
  • Go to “Phone”.
  • Select “Incoming Calls”.
  • On the page that opens, find the item “Proximity sensor”. As a rule, it is in the on state. So turn it off, wait 5-10 seconds and turn it back on.

After that, restart your smartphone and check the functionality of the module. If the problem on Xiaomi Poco does not disappear, proceed to calibration.

Calibration via “Settings”

To calibrate the module, do the following:

  • Open “Settings” and select “My Device”.
  • Next, go to the “All characteristics” section, in which you need to find the “Kernel version” item. Tap on it several times until the CIT menu appears on the screen.
  • Once in the equipment check menu, click on the ellipsis located in the upper right corner.
  • Then click on Proximity sensor calibration.
  • Now close the module with your finger until the value “5” on the screen changes to “0”. Then click on the Calibration button.

App Calibration

Above, we described how to calibrate the sensor using the built-in tools. However, if the instruction seemed resource-intensive to you, we advise you to use an external application for calibration. To do this, do the following:

  • Download the Activity Launcher from this link.
  • Install the program on your phone and turn it on. Grant Activity Launcher all requested permissions.
  • Enter proximity in the search bar.
  • The CIT field will appear. Select the second substring in it.
  • A window will open in which tap on the Calibrate button.

After that, the module will calibrate and start working normally if it is not damaged.

Possible problems with the proximity sensor on the Poco and their solution

There are a number of reasons why this module does not work well or has completely stopped responding to user actions. We list the main causes of problems:

  • since this module is located near the front camera, it can simply be covered by a protective glass installed on the screen of your smartphone. In this case, you must either put up with the non-operation of the sensor, or stop using the protective glass;
  • it cannot be ruled out that the sensor stopped working as a result of problems with the firmware. You can fix problems by installing the latest version of MIUI or rolling back the gadget to factory settings;
  • The cause of the malfunction may be accumulated dust or dirt inside. Turn off the gadget and carefully blow the area around the sensor. Next, restart the gadget and check the functionality of the module;
  • hardware problems cannot be ruled out. They can occur both as a result of the wear of the module, and as a result of damage to the smartphone (for example, after the gadget has been dropped). In this case, contact the service center.

How to have emoticons on Xiaomi Poco M3

Emoticons, also called emoticons or emoticons. these are little yellow men or everyday images that you can use on your Xiaomi Poco M3. They are used, in particular, when sending SMS or in social networks. They can be useful for users to express their mood and thoughts.

Writing this article will help you understand how to have emoticons or emoticons on your Xiaomi Poco M3. We will start by explaining to you how to check if emojis are being read by your Xiaomi Poco M3, then how to activate the emoji keyboard and finally how to download third party apps.

Reading emoticons on your Xiaomi Poco M3

This step is critical to the smooth execution of the manipulation. It consists in checking whether your Xiaomi Poco M3 reads emoticons. All you have to do is go to your internet browser and type “emoji” in the search bar. After that, your results page will be displayed and you will see if your Xiaomi Poco M3 can read emoticons, emoticons or emoticons or not. If your smartphone can read them, you will see these little yellow men appear, which express different emotions, and you can move on to the next paragraph. If your smartphone cannot read them, you will see squares instead of emoticons, and all you have to do is skip to the last paragraph of this article.

Activate the emoji keyboard on your Xiaomi Poco M3

Since your Xiaomi Poco M3 is capable of reading emoji, all you have to do is activate the keyboard.

Don’t worry, it’s very easy to do.

First, go to the settings of your Xiaomi Poco M3, then go to the “Language and input” section. Once here, press the “Settings” button on your keyboard.

Then click “Add Dictionary” and then select the keyboard named “Emoji”. Finally, all you have to do is activate this keyboard.

From now on, you have an emoji keyboard on your Xiaomi Poco M3. If you want to insert an emoji into an SMS, all you have to do is press the key corresponding to the emoji and select it.

Download emoticons on the keyboard

Probably your Xiaomi Poco M3 cannot read emojis when you receive them. Therefore, apps are available in the Google Play store to solve this problem.

These applications will allow you to access the emoji dictionary. You just need to type “Emoji keyboard” in the Google Play Store search bar and make your choice. The most famous app is the official Google keyboard, which offers the ability to use emojis, as well as many other features.

Read user ratings and reviews carefully to make the choice that best suits your expectations.

Also, be careful, some apps turn out to be paid while others. completely free.

Download messaging apps

If you don’t want to download an emoji keyboard because you don’t feel the need to send emojis to your friends, you can just download apps that can read emojis.

Go to the Google Play Store and type “SMS” in the search bar. The Google Play Store will offer you a wide variety of apps like WhatsApp or Viber that allow you to send and receive messages, make calls, send photos, etc. In addition to reading emoji, some messaging apps offer an emoji keyboard, so read the reviews carefully users and ratings of applications you are interested in. Some apps are free and some are paid, so be careful and consider your choice of app carefully. If you encounter any difficulties following the explanations that we have been able to give you, we advise you to consult a specialist who can help you solve this problem.

Things are much more serious when your favorite gadget does not completely respond to the power button. There is no universal recommendation for such a case. Representatives of manufacturers and service centers are advised to try one of the following ways to save a frozen phone:

  • Incoming call. you should ask someone to call the problem smartphone. If the display shows an incoming call, then you need to quickly call up the reboot menu by holding down the power button.
  • If the power button does not work, then wait until the gadget is discharged. A complete power outage in this case will interrupt the processes that caused the failures. You can check if the problem is solved by charging the phone a little and turning it on.
  • Some smartphones are equipped with a Reset service button, which activates an instant reboot immediately after pressing it. It is present, in particular, on some models from Sony and HTC, and is located next to the USB connector (not to be confused with the microphone hole) or in the place for installing the SIM card slot. It should be pressed gently, using a thin needle or toothpick.

If you manage to bring the device to its senses, it is recommended to manually check the list of recently installed software and remove the dubious one. It is also worth running a regular antivirus and following the recommendations of the operating system. With constant freezes, you can try restoring to factory settings or contacting a service center.

How to restart Xiaomi Poco M3 phone if it freezes

A few years ago, almost all Android smartphones were equipped with collapsible cases. In the event of system failures, device owners could perform a quick reboot by removing the battery for a couple of seconds. Today, it is impossible to solve problems so radically. the design of gadgets will not allow access to the battery. It will be possible to figure out how to restart the Xiaomi Poco M3 phone if it freezes without much difficulty. the developers of the popular operating system have provided several ways.

If the device stops responding to the usual actions, then the reason probably lies in software failures. Without using the equipment available to the SC masters, it is impossible to find out what caused the freeze. However, the most common factors are:

  • errors in the operation of the graphical shell or when updating the OS;
  • excessive filling of the internal memory of the device;
  • failures when updating programs or firmware;
  • sudden changes in ambient temperature;
  • mechanical damage.

In many situations, rebooting helps the smartphone recover. If the freezes are permanent, then you will have to resort to more serious measures.

Launch problems

The following method is relevant for such a problem. the smartphone freezes when turned on. This manifests itself in the form of a loading screen, which does not disappear anywhere for too long. Usually, the device can be turned off by simply holding down the corresponding button. You can resolve the situation like this:

  • Put the smartphone on charge in order to eliminate the problem of a sudden shutdown due to a dead battery.
  • Call the Recovery menu in the following way: on the switched off device, hold down the power and “volume up” buttons until vibration.
  • After a couple of seconds, the menu required for rebooting will appear on the display. Select the item “Reboot system now”. Within a couple of minutes, the smartphone should fully boot in normal mode.
See also  One earphone runs out faster than Xiaomi

If the system has not experienced serious failures, then rebooting using Recovery will be quick and safe. However, you can also face a complete failure of the operating system. You can solve the problem, but you will have to sacrifice the files located in the internal memory (everything that is saved on the MicroSD will remain in place).

So, if the phone freezes on the splash screen when turned on, then restoring to the factory settings will allow you to deal with the situation. You can do this following the instructions for accessing Recovery, noted above, but select the “Wipe data / factory reset” item in the menu. Since recovery may differ for different manufacturers, recovery may be hidden behind the “Wipe data” or “Advanced wipe” items. After a couple of minutes, the gadget will turn on and offer system settings that users usually perform after purchase. If such cardinal methods do not work, the only way out is to visit a service center.

Poco M3 Best Budget Smartphone: Long Lasting, Low Cost, Great Performance (SD662, 4GB/64GB, 6000mAh, 48MP Camera)

The latest Poco M3 is a new smartphone for pennies. The excellent and inexpensive Poco M3 model was presented at the end of last month and promises to be one of the best smartphones in the budget category, especially considering the powerful 6000 mAh battery. The smartphone is suitable for both avid gamers and lovers of good photography. The smartphone has a very good Qualcomm Snapdragon 662 processor, an excellent 6.53 display, a textured case, and a 48-megapixel triple camera. Attention, there is no NFC module for contactless payment. But on the plus side, I note that there is a 3.5 mm audio output and stereo speakers. The surface of the back cover has a deep textured relief that protects against scratches.

So, a very successful model of the Poco X3 NFC smartphone (detailed review and test of the Poco X3 NFC at the link) has a “younger brother”. the Poco M3 smartphone, which looks almost the same, is very well equipped, even has a larger battery than in POCO X3 NFC. Smartphone Poco M3 is positioned as a very inexpensive smartphone in the budget category, which can do more than other competitors. From other Xiaomi models, it can be compared with Xiaomi Redmi Note 9S (detailed review and test of Xiaomi Redmi Note 9S at the link), which has a similar set of features and cost, and I also note that both Poco M3 and Xiaomi Redmi Note 9S are not equipped with NFC module for contactless payment.

Specifications:
Model POCO M3 (Xiaomi sub-brand)
vendor code M2010J19CG
CPU Qualcomm Snapdragon 662 octa-core processor, Adreno 610 video subsystem
Display 6.53″ DotDrop screen, 2340 x 1080 FHD resolution, Corning Gorilla Glass 3
Memory 4GB RAM 64GB ROM (Expandable by TF card up to 512GB, 4/128GB model available)
rear camera Tri-camera: 48MP f/1.79 main sensor, 5MP macro 2MP scene depth sensor.
Front-camera 8 MP, ƒ/2.05
Battery 6000 mAh, with 33W charger included, 33W fast charger in the box, up to 8 hours of continuous gaming, up to 17 hours of video playback, up to 196 hours of music listening, up to 583 hours of standby time
Interfaces USB-C, Wi-Fi 2.4/5 GHz, Bluetooth 5.0, GPS, OTG, dual SIM (separate slot), 3.5mm audio jack, active infrared, fingerprint scanner
Network frequencies LTE B1/B2/B3/B4/B5/B7/B8/B18/B19/B20/B26/B28/B38/B40 GSM: B2/B3/B5/B8
Peculiarities 3D texture of the back cover
OS MIUI 12 for POCO, Android 10, Global Version, OTA Update Support
Weight and dimensions weight 198 g, HxWxT 162.3 x 77.3 x 9.6 mm

As in the POCO X3 NFC smartphone model, the packaging is made in acid yellow.

The kit includes a charger with QC3.0, a USB-C cable, a TPU case, a tool for removing the SIM card tray, and instructions.

The instruction contains basic information about the smartphone, but in English.

The new smartphone comes in a wrapping (film) on which the main “marketing” chips are applied: a 48 MP camera, a 6000 mAh battery, a large 6.53 “display, an efficient SD662 processor. As for the contactless payment module, there are also cheaper smartphones with NFC- module.

I will single out two distinctive features of this model at once, which attract the eye to the smartphone: the back cover of the POCO M3 smartphone has a deep matte relief. The texture is reminiscent of leather trim, which is quite nice.

In addition to the advantages listed above, the POCO M3 model is positioned as a branded smartphone with a modern design. The block camera is designed in an unusual way. in the entire width of the body

On the bottom of the case there are holes for a microphone, a speakerphone, a USB-C connector for recharging, communication with a computer and for connecting OTG peripherals. On the top there is a noise-canceling microphone and a connector for connecting wired headphones. On the right side of the case are the volume and power buttons, the latter comes immediately with a built-in fingerprint scanner. There is a SIM card tray on the left side of the case.

The back cover has a deep relief, which was the right decision on the part of the developers. The smartphone lies better in the hand, the texture on the plastic is tactilely pleasant. And in terms of wear resistance, it turned out to be competent. scratches are less noticeable on the case.

A few words about the camera. The POCO M3 smartphone uses a 48 MP main sensor, as well as an additional wide-angle sensor and a scene depth sensor for effects and an autofocus system. Flash LED, located next to the camera. The front camera is located in a V-shaped cutout in the center of the top edge of the display.

Mains charger complete with support for fast charging QC3.0 (22 W), with euro plug. Power parameters: 5V/3A, 9V/2.23A, 12V/1.67A, 20V/2.25A. Pretty good for such a compact unit. If you need power with a margin, then it makes sense to purchase something like a UGREEN GaN 65W charger, or even a Baseus 120W. The cable is of good quality, suitable for both charging with high current and for synchronization with a computer.

The cable included is quite good in quality, suitable for both charging in QC mode and for synchronization with a computer.

The tray for sim cards is large, separate for two nano-SIMs at once.

You can also install a microSD memory card separately. Good and convenient tray option.

The kit included a soft silicone case to protect the smartphone out of the box. The case is transparent and displays all the beauty of the textured cover.

There are high sides around the display, a protective flap on the USB-C connector, and a slot for a fingerprint scanner.

The block camera is protected by a special ledge in the case.

To transfer files, you can use both Wi-Fi and the drive. The OTG function is working properly. A flash drive, or rather, a universal UGREEN card reader, the smartphone saw and connected without any problems. USB3.0 copy speed fast.

The smartphone has an add-on MIUI for POCO over the Android 10 system. The Russian language works right out of the box.

The screen is bright, very good for its price. The size is slightly smaller than the POCO X3 NFC model. V-shaped camera notch cleverly hidden by a dark theme.

Here are some screen shots from POCO X3.

For starters, the MIUI 12 shell is installed, which has also been updated to the current version after being turned on. Russian language and local communication frequencies are present out of the box.

I will bring the test results with special packages and benchmarks.

Antutu test result: 180575 PC Marl test result: 5910 3D Mark test result: 368(WL), 1152(SSE), 1804(SE). Geekbanch score: 315/1383.

Benchmark results are quite good for the energy efficient SD662 processor. This result is quite enough for games, for watching FDH video without brakes, as well as for a long period of active operation from a single battery charge.

As for overheating, the throttling test showed that the smartphone practically does not drop performance at maximum continuous load. The deviation was about 7%. A very respectable indicator. Satellites catches fast enough, multi-touch confirmed 10 touches.

Wi-Fi speed is decent, but it depends heavily on the router itself and the channel. If you have a 5 GHz router installed, the results may be more interesting.

A traditional comparison of smartphones that allows you to make the right choice from a variety of similar models. For starters, the latest POCO X3 NFC model, which, in fact, is the “big brother” of POCO M3.

POCO M3 is a little smaller, a little cheaper, a little simpler and is positioned as a long-lasting inexpensive model.

The POCO X3’s camera is more advanced than the POCO M3’s, despite the modern look of the latest model’s block camera.

Another promising model of 2020 is the OnePlus Nord N10 5G smartphone.

The OnePlus Nord N10 5G smartphone is somewhat more compact, has a slightly better camera (quad 64 MP), and is equipped with an NFC module. Costs a little more.

For several days I was like with the new Amazfit GTR2 Smart Watch. the smartphone keeps Connect perfectly, does not lose the watch. Conveniently.

Games on the smartphone run at an enviable speed and are played without brakes.

The processor performance is enough for games on medium and high settings.

The same WoT Blitz at maximum speed behaves very comfortably.

It turned out to roll up several successful battles.

That’s all for now, let’s move on to testing smartphone cameras.

The camera application is quite advanced, has a number of additional shooting modes, autofocus, AI modes and improvements, manual mode (“Pro”).

The smartphone takes very good photos on the main sensor.

You can zoom in on a photo while shooting by zooming in with two fingers. No separate fixed zoom modes.

Selfie shots are not a strong point of this smartphone. The AI ​​focusing and enhancements mode works, but the sensor itself is used quite simply (8 megapixels), and the pictures are very “average”.

But the pictures from the main camera in 48 megapixel mode are very detailed.

Even at high magnification, sharp details are visible.

Works especially well in bright or street lighting.

Another crop from haires shows clear and unblurred details of the photo.

Here are the properties of the photo files. From the main camera 3000 x 4000 pixels (12 MP). In 48MP mode, images of 8000 x 6000 pixels are obtained. In selfie mode. 2448 x 3264 pixels (8 MP).

Xiaomi Poco M3 не включается после перезагрузки! Xiaomi Poco M3 after reboot doesn’t turn on!

In principle, for a comparable cost, you can buy an Infinix Zero 8 smartphone, which will be a very interesting option.

A separate plus to the developers for the fact that they did not remove the output to wired headphones. Now I can listen to music with my favorite headphones.

In principle, to output sound via USB-C, you can use special amplifier adapters, for example, the iBasso DC02 mobile DAC.

What can be said about the POCO M3 smartphone. this is an excellent choice for its price. The smartphone pleased me, especially its battery life (it’s no joke. a 6000 mAh battery). The Snapdragon 662 processor is very good at work. it “does it in time” with games, and is efficient in terms of consumption, does not heat up and does not throttle. The design of the smartphone is interesting, especially the back cover. The manufacturer left a 3.5 mm output for headphones. also a significant plus. The 48 MP main camera takes decent pictures. I note that the front camera “let us down”, only 8 megapixels. And for many, the lack of the possibility of contactless payments due to the lack of an NFC module will become a critical moment. True, if you have a plastic card with a similar function, this does not become a big problem. The smartphone is noticeably better than its fellow Xiaomi Redmi Note 9S, at a comparable cost. Of course, it’s up to you to take it or not. I liked the smartphone. For contactless payment using the NFC module, choose Poco X3 NFC or Xiaomi Redmi Note 9 Pro smartphones. Well, or similar ones like Realme 6 Pro/7. You can get an additional discount using Aliexpress promotional codes and coupons. From 12/27/2020, promo codes are valid: lexus100dec epn100dec admitad100dec hightechmail100dec backit100dec for a 100 discount from 800₽, as well as promo codes: lexus350dec epn350dec admitad350dec hightechmail350dec backit350dec for a 350 discount from 2700₽.

With other tests and reviews of gadgets, as well as selections of equipment, you can find the links below and in my profile.

Xiaomi phone freezes, screen does not turn on

If the phone does not respond to your actions, does not turn off, and the screen is inactive, try restarting it first. On different models, this is done in its own way, but most often by holding down the power key (sometimes with the volume down button) for a few seconds. If this works, you will enter FastBoot mode, which is similar to the BIOS on a PC. In it, select the Power button to restart the OS.

If there is no result, it can be assumed that the error is in one or more system files. It’s too early to despair, you can try to reflash the device or roll back the operating system. You can do this in several ways:

Download the old version of the MIUI interface, but this will only work if the bootloader is unlocked

If your phone is in developer mode, then the system can be rolled back

You can also download new software in Soft Recovery mode

In older phones, this problem is sometimes solved like this: you need to remove the battery and insert it back. However, modern smartphones have a one-piece design, so you will have to contact a repair center to solve the problem.

There are several ways to turn on a Xiaomi smartphone. Some of them work if the power button does not function for some reason. Consider the most useful options.

How to turn on the Xiaomi phone, including without the power button:

These are simple activation options, but sometimes even they do not work and you have to resort to more serious measures. They will be discussed below.

If none of the activation options worked, it is obvious that the problem is much more serious and related to the hardware of the smartphone. For example, if he fell to the floor or into the water. Trying to fix the phone yourself is not worth it. this is fraught with even more serious problems. Worth the service.

Why Xiaomi phone won’t turn on

The reasons can be completely different, but there are some of the most common options:

any structural element has broken;

the phone has been dropped into water or liquid has been spilled on it;

phone has been damaged.

First of all, find out which of these reasons is most likely. maybe you dropped your phone or updated it. If the device is new, marriage is possible. In some cases, you will be able to fix the phone yourself, in others, you will have to send it in for repair.

Reason: Xiaomi bootloader damage

Bootloader in Xiaomi is designed to securely boot the device. If it is damaged, the phone will not turn on. There can be many reasons for damage: a crooked OTA, an incorrectly performed ROOT, or a failure.

There are several ways to return the bootloader to its place: flash the stock MIUI using MiFlash Pro or restore the bootloader using a computer, USB cable and ADB / Fastboot.

You can also use the Xiaomi ADB/Fastboot Tools App.

Attention! Before restoring the bootloader using ADB / Fastboot, you need to make sure that all the necessary drivers for the smartphone are installed on the PC. Also check the cable connection. If Connect is accidentally interrupted in the process, you will receive a brick that can only be restored in a service center.

Reason: corrupted firmware files

If the files of the operating system are damaged, then there is only one way out. to flash the smartphone again. If we are talking about stock MIUI, you will need the MiFlash Pro program and a set of ADB drivers.

If you have custom firmware installed, then it has its own instructions: the firmware is carried out using the TWRP recovery and the firmware downloaded to the memory card in ZIP format in advance. After the firmware, you will need to set up an account and everything else again. You can download the firmware for your Xiaomi phone from the catalog of official updates.

If you are flashing MIUI via MiFlash Pro, then there is an option to save user data. To do this, at a certain stage, it is necessary to mark not the item clear all and flash, but save user data. Otherwise, all photos and music will be permanently deleted.

Reason: software glitch

Sometimes it happens that the smartphone firmware (stock or custom) fails. This may be due to viruses, incorrectly set superuser rights, and other reasons. The phone may turn off and not turn on. However, this problem can be solved.

Hard Reset will help. reset the phone to factory settings: step-by-step instructions for Xiaomi hardress. In this case, all user data on the internal drive will be deleted. This applies to both photos, videos or music, as well as applications along with their settings. In fact, the phone will have to be configured again.

The link above shows several ways to reset, but here is the easiest one for a switched off smartphone:

The first boot after a factory reset can take up to 10 minutes. You can’t turn off your phone during this time.

There is a good chance that after the reset you will be able to start the phone and use it normally. This method can help if the smartphone is functioning, but the screen does not turn on.

If Xiaomi does not turn on after a factory reset, try the following ways to revive your smartphone.

Force restart Xiaomi Poco M3

First, let’s look at several methods related to recovery through Recovery mode. It will be possible to get into it if the gadget is charged by more than 15%. At the same time, by connecting the charger, you can verify the integrity of the screen and the operability of the USB connector.

So, if the phone responded to the charging connection, displayed the process of replenishing the battery, then after reaching a suitable level, you can proceed to the following manipulations:

The device should immediately go to reboot, followed by a regular download of Android. By the way, if the gadget is not charging, it is recommended to try other USB cables and chargers. It is possible that the problem lies precisely in them, and the phone is simply dead.

Why POCO M3 won’t turn on

It was not uncommon for the Poco M3 to turn off completely during a system update, which users immediately began to report to the official Xiaomi forum. Devices could turn off after battery drain. some updates are delayed. But not this time when POCO M3 did not turn on after the process ended and rebooted.

The moderators explained that the culprit was the firmware update itself, designed to provide better memory performance. They also pointed out a simple solution: hold the power button for 13 seconds until the smartphone starts up in the usual way.

If no updates have been made, the phone freezing at power on can be caused by the following events:

A software error can often be corrected on its own. But before that, let’s do a quick check. If the Xiaomi smartphone turns on, but does not boot beyond the splash screen, the most “painless” reason is a short circuit on the SIM. Its temporary removal from the phone (of course, after turning it off) will resolve the situation. Devices respond similarly to the insertion of a damaged or incompatible memory card. And again, just remove the flash card and see how the launch goes without it.

#Design, ergonomics and software

Experiments in the design of smartphones today are almost impossible at the same time and the field for these very experiments is too narrow (the form factor obliges to make certain decisions on appearance), and the strength of trends is too great. Doing things differently is simply dangerous for sales. But Xiaomi unexpectedly did.

See also  Android lock screen splash screen

From the front, POCO M3 is a smartphone like a smartphone, even a little outdated with its waterdrop notch instead of a hole. The frames around the display are small (the screen eventually occupies 83.4% of the front surface of the gadget), but this will not surprise anyone.

POCO M3, front panel: front camera in the cutout at the top, speaker under the top edge

But behind the new contender for leadership in the budget segment looks very unusual. The three-camera module seems to be quite standard. the lenses are inscribed in a glossy rectangular panel in the corner of the case, but visually combined with a glossy black panel with a large POCO inscription. In this age of major labels, the solution is both relevant and bold, only the Honor 30 Pro comes to mind. Even more interesting is the coating of the rest of the back panel made of rough plastic under the skin. Not only does it look fresh, but the smartphone also does not slip in your hand at all, you can safely refuse a case.

POCO M3, back panel: on the left in the upper part of the block with three cameras and a single LED flash

The body of the POCO M3 is large, as expected from a gadget with a 6.53-inch screen, but keeps within the bounds of 162.3 × 77.3 × 9.6 mm. Only the thickness is slightly out of the standards and it is clear that this is due to the huge 6,000 mA battery·h. The smartphone fits normally in ordinary s, and although it is more of a two-handed gadget, it is quite comfortable to hold it.

POCO M3, left side: slot for two SIM cards and one memory card

POCO M3, right side: lock / power key with a fingerprint scanner built into it and a volume key

POCO M3 is presented in three colors: blue, yellow and black. Of course, the blue and yellow POCOs look especially bright and fresh, but we got a black one for the test, which, thanks to the coating under the skin, gives the impression of a very solid gadget, obviously not for 14 thousand rubles.

POCO M3, top: speaker, infrared, mini-jack, microphone

POCO M3, bottom: microphone, USB Type-C port, speaker

Otherwise, this is quite a standard budget smartphone for 2020: a mini-jack on the top, a USB Type-C port (yes, yes) on the bottom, a fingerprint scanner inscribed in the side power / lock key.

The side scanner performs its duties quite successfully, yes, the coverage area is small, sometimes you have to touch it once again so that the smartphone recognizes the owner, but the problem with accidental unlocks in your is solved. Firstly, the capacitive sensor here is in any case not hypersensitive, once again it will not work by accident. Secondly, you can choose to unlock the gadget either by touching the surface of the key with the scanner, or by fully pressing it, which will finally solve this issue. You can duplicate the scanner with a face recognition system using the front camera; this system works quickly, but there are always a lot of questions about the reliability of this method.

POCO M3 runs on Android 10 running MIUI 12 shell. The fact that this is not Mi and not Redmi is reminiscent of only minor details, such as the ability to select dynamic lock screen wallpapers with links (in the manner of wallpapers for Windows) and some design elements that are not striking. Poco Launcher, having given its main distinguishing features to the large Xiaomi shell (like subsections in the application menu), is gradually becoming a thing of the past. By the way, the camera icon, which was so puzzling with its similarity to the Chrome icon in POCO X3 NFC, was changed to the standard one from MIUI, now there are no problems. The shell works stably, but not very quickly, sometimes exiting the locked state takes up to three seconds, there are five-second pauses when starting basic but heavy applications (for example, a camera). Still, signs of budgeting are felt, albeit not super-serious.

#Specifications

Xiaomi POCO M3 Xiaomi Redmi Note 9S moto g8 Infinix Zero 8 Honor 10X Lite
Display 6.53″ IPS 2340 × 1080 dots, 395 ppi; capacitive, multi-touch 6.67″ IPS 2400 × 1080 dots, 395 ppi; capacitive, multi-touch 6.4″ IPS 1560 × 720 dots, 268 ppi; capacitive, multi-touch 6.85″ IPS 2460 × 1080 dots, 392 ppi; capacitive, multi-touch 6.67″ IPS 2400 × 1080 dots, 395 ppi, capacitive multi-touch
Protective glass Corning Gorilla Glass 3 Corning Gorilla Glass 5 No information No information No information
CPU Qualcomm Snapdragon 662: Quad-core Kryo 260 Gold, 2.0 GHz Quad-core Kryo 260 Silver, 1.8 GHz Qualcomm Snapdragon 720G: eight cores (2 × Kryo 465 Gold, frequency 2.3 GHz and 6 × Kryo 465 Silver, frequency 1.8 GHz) Qualcomm Snapdragon 665: Quad-core Kryo 260 Gold, 2.0 GHz Quad-core Kryo 260 Silver, 1.8 GHz Mediatek MT6785 Helio G90T: eight cores (2 × Cortex-A76, frequency 2.05 GHz 6 × Cortex-A55, frequency 2.0 GHz) HiSilicon Kirin 710A: eight cores (4 × ARM Cortex A73, frequency 2.0 GHz 4 × ARM Cortex A53, frequency 1.7 GHz)
Graphics controller Adreno 610 Adreno 618 Adreno 610 ARM Mali-G76 MC4 ARM Mali-G51 MP4
RAM 4 GB 4/6 GB 4 GB 8 GB 4 GB
Flash memory 64/128 GB 64/128 GB 64 GB 128 GB 128 GB
Connectors USB Type-C, mini-jack 3.5 mm USB Type-C, mini-jack 3.5 mm USB Type-C, 3.5mm USB Type-C, mini-jack 3.5 mm USB Type-C, mini-jack 3.5 mm
Memory card slot Yes (dedicated microSD slot) Yes (dedicated microSD slot) Yes (hybrid microSD slot/second nano-SIM) Yes (dedicated microSD slot) Yes (dedicated microSD slot)
SIM cards 2 × nano SIM 2 × nano SIM 2 × nano SIM 2 × nano SIM 2 × nano SIM
Cellular 2G GSM/GPRS/EDGE 850/900/1800/1900 MHz GSM/GPRS/EDGE 850/900/1800/1900 MHz GSM/GPRS/EDGE 850/900/1800/1900 MHz GSM/GPRS/EDGE 850/900/1800/1900 MHz GSM/GPRS/EDGE 900/1800/1900 MHz
Cellular 3G HSDPA 850/900/1700/1900/2100 MHz HSDPA 850/900/1700/1900/2100 MHz HSDPA 850/900/1700/1900/2100 MHz HSDPA 850/900/2100 MHz HSDPA 850/900/1900/2100 MHz
Cellular 4G LTE bands 1, 2, 3, 4, 5, 7, 8, 20, 28, 38, 40, 41 LTE bands 1, 3, 4, 5, 7, 8, 20, 28, 38, 40 LTE bands 1, 2, 3, 4, 5, 7, 8, 20, 38, 40, 41 LTE Cat.4 (Cat4 150/50 Mbps): 1, 3, 5, 7, 8, 20, 28, 38, 40, 41 LTE: 1, 2, 3, 4, 5, 7, 8, 20, 28, 38, 40, 41
WiFi 802.11a/b/g/n/ac; 2.4/5 GHz 802.11a/b/g/n/ac; 2.4/5 GHz 802.11b/g/n; 2.4 GHz 802.11a/b/g/n; 2.4/5 GHz 802.11a/b/g/n/ac; 2.4/5 GHz
Bluetooth 5.0 5.0 5.0 5.0 5.1
NFC Not Not There is Not There is
Navigation GPS, A-GPS, GLONASS, BeiDou GPS, A-GPS, GLONASS, BeiDou, Galileo GPS, A-GPS, GLONASS, Galileo, BeiDou GPS, A-GPS; other supported systems not specified GPS, A-GPS, GLONASS, BeiDou
Sensors Illumination, proximity, accelerometer/gyroscope, magnetometer (digital COMPASS) Illumination, proximity, accelerometer/gyroscope, magnetometer (digital COMPASS) Light, proximity, accelerometer/gyroscope Illumination, proximity, accelerometer/gyroscope, magnetometer (digital COMPASS) Light, proximity, accelerometer/gyroscope
The fingerprint scanner Yes (on the side key) Yes (on the side key) Yes (on the back) Yes, on the side button Yes, on the side button
Main camera Triple module: 48 2 2 MP, ƒ/1.8 ƒ/2.4 ƒ/2.4, phase detection autofocus, single LED flash Quadruple module: 48 8 5 2 MP, ƒ/1.8 ƒ/2.2 ƒ/2.4 ƒ/2.4, phase detection autofocus, single LED flash Triple module: 16 MP, ƒ/1.7 8 MP, ƒ/2.2 2 MP, ƒ/2.2 (macro camera), hybrid autofocus, LED flash Quad module: 64 MP, ƒ/1.9 8 MP, ƒ/2.3 2 MP, ƒ/2.4 2 MP, ƒ/2.4, phase detection autofocus, quad LED flash Triple module: 48 8 2 MP, ƒ/1.8 ƒ/2.4 ƒ/2.4, phase detection autofocus, LED flash
Front-camera 8 MP, ƒ/2.1, no autofocus, no flash 16 MP, ƒ/2.5, no autofocus, with flash 8 MP, ƒ/2.0, no autofocus, no flash Dual module: 48 8MP, ƒ/2.2 ƒ/2.2, no autofocus, no flash 8 MP, ƒ/2.0, no autofocus, no flash
Nutrition Non-removable battery: 22.8W·h (6000 mA·h, 3.8 V) Non-removable battery: 19.08 W·h (5020 mA·h, 3.8 V) Non-removable battery: 15.2W·h (4000 mA·h, 3.8 V) Non-removable battery: 17.1 W·h (4500 mA·h, 3.8 V) Non-removable battery: 19W·h (5000 mA·h, 3.8 V)
The size 162.3 × 77.3 × 9.6 mm 165.8 × 76.7 × 8.8mm 161.3 × 75.8 × 9 mm 168.7 × 76.1 × 9.1mm 165.7 × 76.9 × 9.3 mm
Weight 198 grams 209 grams 188 grams 205 grams 206 grams
Water and dust protection Not Splash protection P2i (splash protection) Not Not
Operating system Android 10, MIUI 12 shell Android 10, MIUI 11 shell Android 10 Android 10, XOS 7.0 shell Android 10 Magic UI skin (no Google services)
Actual for version 4/64 GB, 14,490 rubles for version 4/128 GB 15,249 rubles for the 4/64 GB version, 17,500 rubles for the 6/128 GB version 12 990 rubles About 16 thousand rubles 14 990 rubles

Xiaomi POCO M3 information about the filling according to the CPU-Z application. Ignore the signature in the SOC section, just the Snapdragon 662 and 665 platforms are as close as possible, and CPU-Z cannot distinguish them

Review of the smartphone POCO M3: the most beautiful budget employee

When the first news about the revival of the buried arrived, it seemed that with the ends of the Pocophone brand it didn’t even occur to Xiaomi that Xiaomi would go so far in this matter. Now this is not just an option to get the most powerful smartphone for minimal money (as was the case with the first iteration of a middle-class smartphone for other characteristics, they put a flagship hardware platform), but already a full-fledged sub-brand with its own model range.

The word pocophone, however, is a thing of the past, along with the first attempt to launch the brand, it was replaced by the laconic POCO. We have already dealt with two POCOs this year: POCO F2 Pro more or less continues the work of its ancestor from 2018, but does not claim price records, POCO X3 NFC at first took an incomprehensible position, but then fell sharply in price and logically led our a selection of the best smartphones under 20 thousand rubles. The new POCO M3 could also be in this collection, but adjusted for a more budgetary focus. This smartphone was created to hit the jackpot in the segment of about 10 thousand rubles: there is a fresh Qualcomm Snapdragon 662 platform, an unexpected design, a giant battery (6000 mA·h), stereo speakers and a 48-megapixel camera. Yes, no compromises anywhere (we are still talking about a gadget that costs about 14 thousand): no NFC, no wide-angle module, no fast charging. But the list of attractive features is very beckoning is it worth succumbing to this pipe?

#Display and sound

The main feature of POCO X3 NFC, in addition to a powerful hardware platform, was a screen with a refresh rate of 120 Hz, which made it possible to challenge realme 6 Pro’s claims to be the main mid-range smartphone in 2020. The POCO M3 also has a remarkable screen for its class, it dispenses with the high-frequency mode, but offers Full HD resolution, which is still rare for this price range. The panel is familiar, in particular, from last year’s Redmi Note 8 Pro: 6.53 inches, IPS, 2340 × 1080 points. Pixel density 395 ppi.

The panel is not bad, the viewing angles are decent (although the brightness drops noticeably with a strong deviation of the gaze from the perpendicular), there is an oleophobic coating. Format 19.5:9. Tempered glass Gorilla Glass 3 is used for protection.

But the measured maximum brightness level without software enhancement during auto-adjustment is 368 cd / m 2, which is below average even in its class. In the sun, you can use your smartphone (anti-reflective coating in place), but not too comfortable. At the same time, the contrast for the LCD panel is excellent 1694: 1.

Image settings are quite extensive: there is a special reading mode with a warm tone of the screen, font adjustments, a dark mode, even special options for working with VR. Color rendition adjustment is also available: there is an automatic adjustment depending on the lighting, and a saturated mode, and a standard mode, and the ability to manually adjust the color tone to taste. I measured the color reproduction of the display in rich and standard modes.

POCO M3, gamma in rich mode. Yellow line performance POCO M3, dotted reference gamma

POCO M3, color temperature in saturated mode. Blue line performance POCO M3, dotted reference temperature

POCO M3, color gamut in rich mode. Gray triangle coverage sRGB, white triangle coverage POCO M3

In both modes, the color gamut is close to the sRGB standard with an extended color gamut, the display is not friendly (and does not swing at HDR either). The grayscale gamma is standard (2.26) with a moderate spread of the curves. The color temperature is increased, but does not stay too much in the range from 7,000 to 8,000 K. The average DeltaE deviation on the Color Checker scale, which includes both a wide range of colors and shades of gray, is 4.01 with a norm of 3.00 deviation is small.

POCO M3, gamma in standard mode. Yellow line performance POCO M3, dotted reference gamma

POCO M3, color temperature in standard mode. Blue line performance POCO M3, dotted reference temperature

POCO M3, color gamut in standard mode. Gray triangle coverage sRGB, white triangle coverage POCO M3

When the standard mode is activated, the image becomes noticeably warmer and the colors are as close as possible to the sRGB standard. The gamma is slightly lower than in saturated mode, 2.14, while the curves behave in much the same way. The color temperature is approaching the standard of 6 0006 700 K. And, most importantly, the average DeltaE deviation on the Color Checker scale is already 1.68 (which falls within the reference, and not just acceptable values). The screen of POCO M3 should be recognized as perfectly tuned.

The sound is also in order and POCO M3 here also exceeds expectations. If in itself the presence of a mini-jack with a completely ordinary audio path is just normal, then Bluetooth 5.0 with support for key high-quality data transfer profiles (aptX, LDAC) is very pleasing for a budget employee. Well, even more impressive is the presence of stereo speakers, as in POCO X3 NFC, paired with the front speaker located on the bottom edge. The smartphone sounds not just loud, but with a certain taste.

Why does the Poco M3 smartphone not turn on?

At the end of 2020, Xiaomi, or rather its then sub-brand, and now a full-fledged POCO brand, completed the parade of smartphones and offered users a comfortable POCO M3. Balanced performance, power at a minimal price and a fresh design of the rear panel. there was nothing surprising in the overall popularity of the model.

However, POCO M3 has been affected by a nasty bug with boot loop not turning on after update. Even with careful handling, phones fail, and before contacting a repair service, you can try to find out the real reason yourself and restore the mobile to working capacity.

The problem is relevant both for the potential hit of the fall of the 20th, Xiaomi POCO X3 NFC, and for the ancestor from 2018, Pocophone F1. And if you are the owner of a POCO F3 model that is interesting for your money or another manufacturer’s smartphone, be prepared in advance and study our recommendations.

Why POCO M3 won’t turn on

It was not uncommon for the Poco M3 to turn off completely during a system update, which users immediately began to report to the official Xiaomi forum. Devices could turn off after battery drain. some updates are delayed. But not this time when POCO M3 did not turn on after the process ended and rebooted.

The moderators explained that the culprit was the firmware update itself, designed to provide better memory performance. They also pointed out a simple solution: hold the power button for 13 seconds until the smartphone starts up in the usual way.

If no updates have been made, the phone freezing at power on can be caused by the following events:

  • unsuccessful installation of custom firmware;
  • damage to OS boot files;
  • infection of the device with viruses after installing applications from unofficial sources;
  • full discharge of the battery;
  • mechanical impact. after a fall, the cable from the display or battery could be disconnected, dust, debris interfere with good contact, and damage from water and oxidation should not be ruled out.

A software error can often be corrected on its own. But before that, let’s do a quick check. If the Xiaomi smartphone turns on, but does not boot beyond the splash screen, the most “painless” reason is a short circuit on the SIM. Its temporary removal from the phone (of course, after turning it off) will resolve the situation. Devices respond similarly to the insertion of a damaged or incompatible memory card. And again, just remove the flash card and see how the launch goes without it.

Restart POCO M3

The method to be executed. It is associated with resetting all processes in RAM and a concomitant reboot of the phone. Reboot rules (device reboot):

  • Proceed to the following manipulations if you are sure that the battery charge is above 15%. Or connect the charger and wait for the right level.
  • Press and hold the power and volume down buttons at the same time for about 10-15 seconds until you feel a vibration. A combination with power may turn out to be working. increasing the volume. Release the buttons when the boot logo appears.
  • In the menu that opens, select “Reboot” (or “Reboot to system”). Manage the volume keys, confirm the selection with the power key.
  • Wait for the phone to reboot and start.

Reset to factory settings

If the violations in the operating system turned out to be minor and after rebooting the smartphone, as before, stuck on the logo or turned off, you will have to reset the POCO M3 to factory settings, that is, return it to its original, “clean” state.

A hard reset will delete a number of files. photos and videos, music, documents and games, phone numbers. The data stored on the memory card will remain intact, but it is better to remove the microSD for the duration of the reset. The remaining files, if possible and necessary, should be transferred to a computer by connecting with a cable.

What to do next to return the system to the “‎out of the box”‎ state:

  • Open the Recovery menu by holding two buttons, as in the first method.
  • Select the item “Wipe data / factory reset” to clear all user data and confirm by pressing the power key.
  • The reset procedure will start, after which you will need to return to the main menu and reboot.

The reboot will take significantly longer than usual, between 5 and 15 minutes. Turning off the smartphone at this time is not worth it. that’s why the remaining percentage of the charge is so important. After the successful completion of the forced reboot, you can proceed to restore the settings.

other methods

If the solutions presented above do not work, and the smartphone does not respond at all to pressing any buttons, then the problem most likely lies in the hardware.

One of the logical reasons for long-bought phones is the battery failure or complete discharge. When the device lies for a long time at a low charge level, the battery is discharged to a “deep zero” and it is extremely difficult to turn it on again. Here are a couple of tips:

  • leave the smartphone on charge longer than usual to replenish the battery capacity;
  • check the charger and cable. accessories also fail;
  • choose a more powerful option for your smartphone.

Over time, complete wear of the battery occurs, which is often noticed by rapid discharge. Premature situation comes:

  • when using a non-original charger;
  • frequent, defective charging of the gadget;
  • hypothermia or heating of the device;
  • being in a humid environment and getting moisture inside.

It will be difficult to replace the battery at home, therefore it is better to contact the service center at least for equipment diagnostics. It is also possible that the power does not reach the battery due to a dirty connector, and the smartphone simply does not charge. It is enough to clean the contacts with a brush dipped in alcohol.

If the phone has recently been dropped on a hard surface, the display cable may have become disconnected, causing nothing to appear on the screen. As well as the ingress of moisture or small debris into the microUSB / Type-C connector. all this is a good reason to contact the master.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE