Xiaomi Mi TV 4s how to install the browser

How to connect Mi Router 4a Giga Version through the app

The first step is to turn on the router and connect an Ethernet cable to the WAN connector. Next, you need to download the Mi Wi-Fi application.

xiaomi, install, browser

When launching the application, we immediately receive a notification signaling the appearance of a new router nearby.

Next, click Set up now and wait for a check for the presence of the Internet.

The next item is to name the Wi-Fi network and set a password.

Waiting for the settings to be applied. By the way, two bands are configured at once: 2.4 GHz and 5 GHz.

Then reconnect to the Wi-Fi network with the given name. And you get to the main menu of the application, where you can view all devices connected to the router and control the connection speed.

At the bottom there is also a key with additional features.

You can check your connection speed and optimize your Wi-Fi.

In the Firewall menu, you can view security settings and create a white or black list.

In the “Settings” it is possible to change the Wi-Fi, Network settings, adjust the region and time, check for updates and reset the settings.

How to connect router Xiaomi Mi Router 4a Giga Version

recently, Xiaomi has introduced new versions of routers. Mi Router 4A Giga Version is already available from Xistore. Let’s figure out how to connect and configure a Xiaomi router through the mobile application and through the web interface.

How to connect Mi Router 4a Giga Version via the web interface

The first point remains unchanged: turn on the router and connect the Ethernet cable to the WAN connector. Connect to the Wi-Fi network with the name indicated on the sticker on the bottom of the router.

Next, launch any browser and enter miWi-Fi.com or in the address bar. Then you get to the main settings page.

To start tuning, just press the Start button. The router sets up an automatic connection.

In the next menu, set up the name of the Wi-Fi access point and password.

For a couple of seconds, the settings are applied and information about the successful initial configuration of the router is displayed.

Reconnect to the access point that you created, go to the same address in the browser. Then you will be prompted to enter the administrator password.

Enter the password and you will find yourself in the main settings menu, where you can see the connected devices, information about the speed and the amount of transferred data.

By clicking on the Settings tab at the top, you can change the Wi-Fi settings, Network settings, change the password and set up the black / white list, update or reset the router.

The Advanced tab provides the ability to configure additional parameters, if necessary.

If something went wrong, you can reset the router settings at any time. To do this, you need to make sure that Mi Router 4A Giga Version has started, then press and hold the Reset button on the back panel until the status indicator turns orange.

Learn new things with Xistore!

Author: Andrey Kalinovsky

From the computer

A PC is much more convenient to use for setting up a router from the Xiaomi brand. If this is a laptop, we connect via Wi-Fi. If a stationary computer. from the LAN port of the router we connect a cable (patch cord) to the computer’s network card.

patch cord Connect the patch cord to the LAN connector of the router, the other end to the connector on the computer

Как Установить Браузер на Телевизор Xiaomi �� Какой Лучше для Android TV. Chrome, Puffin, Aptoide TV

Next, open any popular browser. Chrome, Firefox or Opera. In the address bar, write the address of the panel and go through the authorization. Then we start the setup process.

Additional router features

This product has a non-standard original design. It impresses with its wide functionality. For the average user, this is a promising router. It has a convenient admin panel that is understandable to ordinary users. Key Benefits: Gigabit Ports, Dual Band Wi-Fi, Ample Coverage.

Setting up Xiaomi Mi WI-FI Router 4a

Xiaomi routers are attractive for their low cost and good quality. But the setup process doesn’t always go smoothly. Therefore, let’s prepare in advance for the question: how to set up a Mi router 4a router.

  • How to enter the settings of a Xiaomi router
  • Additional router features
  • Manual configuration of a Xiaomi router
  • From the phone
  • From the computer
  • Configuring Wi-Fi to use the Internet on all devices
  • Router update

Configuring Wi-Fi to use the Internet on all devices

Changing the password from the wireless network was changed above in the text. This setting can be found in the following path: Settings. Wi-Fi settings. In this category, you can change the Wi-Fi name, password and other options.

How to enter the settings of a Xiaomi router

The package does not include a patch cord. This is a cable that usually connects to the router on one side and to the PC’s network card on the other. Therefore, we will connect via Wi-Fi.

Let’s connect the device to the mains. If WIndows 10 is installed, in the right corner we find the Wi-Fi network icon. In the list of available wireless networks, we will find the inscription “Xiaomi_xxxx_xxxx”. Instead of x, numbers and Latin letters are indicated by default. We connect to this network and wait for the initial settings window to load.

Next, we see the welcome window. Under the heading “Mi WI-FI” you need to check the box in front of the Chinese characters. Thus, we agree with the rules for the operation of the equipment. Now we proceed directly to setting up.

In the first line we indicate the name of the network, and in the other. the password (at least 8 characters). At the bottom of the line for entering the password, you can check the box. Thus, the password from the wireless network will be duplicated in the login settings. That is, to enter the admin panel, you will need to specify a similar password. Then click on the big button at the bottom after two lines. We save the entered data used for both networks (2.4 GHz / 5 GHz).

After saving, a new window appears. settings for entering your personal account. In the login field, you can assign a new value or leave the old default. In the password line, either create a new one, or check the box (the same password as for the wireless network). But if you wish, you can make your own adjustments. Apply the specified settings by pressing the appropriate button. The router is rebooting for the changes to take effect.

We return to the list of available networks. We find the new name of the router in order to reconnect to the network, specifying a new password. It is better to name the router in the Latin alphabet. In the lower right corner of the screen, click on the Wi-Fi icon and select your own hardware option in the list of available networks. For convenience, it is advised to check the box “Connect automatically”.

Manual configuration of a Xiaomi router

After connecting, you need to go to the settings panel.

I advise you to use the Chrome browser, because of the application for translating the Chinese interface into Russian or English.

We start typing in the address bar: Next, a login form opens. In the password line, we indicate the value that was previously invented, or corresponding to the password from the wireless network.

After entering the settings cabinet, you should decide on the type of connection. Typically, this information can be requested from the Internet provider that serves you. Let’s take a closer look at the setup process:

  • PPTP. In the interface menu, pay attention to the Advanced item. Go to the VPN category and click on the Add service button. In the window for selecting connection types, we stop at PPTP. Here you need to specify the name in Latin, server IP address, username and password. The user can take such data from the contract. Or contact the hotline of the technical department of the provider. After correct input, we save all the data.
  • L2TP. Open the menu again and select this type of connection. Next, you should indicate similar data that were in the previous paragraph.
  • PPPoE. This type of connection provides a different configuration path. Go to Settings, and then click on the Network settings icon. And in the drop-down menu, we stop at the choice of PPPOE. We indicate our data issued by the provider (indicated in the contract). login and password. If you forgot something, be sure to contact those. Internet company support.

From the phone

How to set up Xiaomi router 4a from your phone? If you do not have a personal computer or laptop, you can enter the admin panel from your smartphone or tablet. On the second, the interface will open more conveniently. On a smartphone, the layout of the admin panel may not be adapted. Open Google Chrome and specify the address of the settings panel in the address bar of the browser. We pass authorization and set up.

The phone may conflict with the computer when using wi-fi.

Router update

To update the firmware, go to the Settings menu and click on the Status icon. After that, click on the Update button. The Wi-Fi router itself will download the latest firmware version. Please make sure the router has a stable internet connection before upgrading.

User experience and smart features

I thought that it would be most optimal to tell in points.

  • The TV’s brightness is at the level of 5-8-year-old models, but it is quite comfortable for viewing. I have a south side and the sun shines during the day. There is glare on the screen, but you do not notice it as you concentrate on the image, not on the reflections.
  • However, dark scenes are best left for the evening.

Dark scenes are best left for the evening. Here on the TV you can clearly see me, the stool that I brought to draw the curtains, behind the stool there are scales from Xiaomi. I was too lazy to shoot films from the TV.

The TV can work perfectly as a second monitor.


  • Type: smart TV
  • Screen: 55 inches, IPS, Direct LED, 3840 × 2160 pixels, 60 Hz, HDR10, 8-bit FRC, brightness 220 nits declared, minimum measured brightness 28 nits, viewing angle 178 degrees, matte, input lag 33 ms (?) ( about input lag. in the “Screen” section)
  • Sound / speaker power: 2 × 10W with bass reflex
  • Processor: CA55 (4 cores at 1.4 GHz), graphics Mali 470 MP3
  • Memory: 2 GB / 8 GB, no memory card slot
  • Operating system: Android 9 (Pie) TV branded launcher PatchWall
  • Ports and communication:
  • USB: 2.0. 3 pcs.
  • AV. 1 piece.
  • Ethernet. 1 pc.
  • HDMI. 3 pcs.
  • 1 headphone jack
  • slot for the CI module. 1 pc.
  • Fiber optic port. 1 pc.
  • Wi-Fi b / g / n / ac, 2.4 / 5 GHz, Wi-Fi Direct
  • Bluetooth 4.2
  • Supported by DVB-T2DVB-C
  • Supports wall mounting, 300mm distance between fixing points
  • Video formats: MPEG 1/2/4, VP8 / VP9 / VC1, H.264, etc. (software can be installed)
  • Images: PNG, GIF, JPG (software can be installed)
  • Materials: metal and plastic,
  • Dimensions: 1231.6 x 710.8 (height without stand) / 767.3 (height with stand) x 264.2 mm, weight 12.5 kg
  • Other: there are no advertisements on the TV, subscriptions from different online cinemas are free for six months each (after the end, each subscription must be purchased separately)
  • Screen

    I got the TV with the largest screen: 55 inches, 4K HDR resolution, 60 Hz refresh rate. In fact, the TV menu works in Full HD, and 4K turns on only when there is appropriate video content. For example, expensive premium TVs always run in 4K and try to use artificial intelligence to “pull” content.

    The declared brightness of the screen is 220 nits, in line with the measured. Minimum brightness. 28 nits.

    It’s a clear day, the curtains are open. Good picture

    The screen has no PWM (does not flicker at low brightness). The sRGB color gamut on the TV is 100%. No glare on black background.

    There are options in the settings that allow you to customize the screen a little. For example, the picture can be warm, cold, or default. I, to my shame, did not see the difference. You can also change the brightness. No auto-tuning. In general, the change in brightness is not too foreseen by the manufacturer, since the screen settings are hidden on the third level of the menu and the brightness scale turns manually rather slowly. Would increase the speed in the next firmware, or something.

    Some users asked questions in our telegram channel. They asked about INPUT LAG (this is the processing time of the signal from the source to the display). Since I did not have special equipment, I took the advice: I connected a laptop via HDMI and started the stopwatch. As you can see, on TV there are 239 thousandths of a second, and on a laptop screen. already 272 thousandths. It turns out that the input lag is 33 ms.

    There was also a question “Do all ports support connecting a 4K 60p set-top box.” Answer: all.

    There was also a question about how HDR works on PS 4 Pro. Answer: HDR works, but read the HDR section below.

    The TV has declared support for HDR. I decided to add a small educational program on HDR. Initially, many manufacturers began to add HDR inscription to their devices, investing in it rather a marketing sense, since the HDR standards have not yet been determined.

    Then the major manufacturers Samsung, LG, Hisense, Toshiba, Sony, Dolby, Netflix and others that are members of the UHD Alliance, having discussed the state of affairs, announced the Ultra HD Premium certificate, which includes the minimum requirements for HDR. Thus, HDR does not mean “true” HDR. But it is important to note that, for example, Sony refused to use the Ultra HD Premium logo, deciding to promote its own 4K HDR label.

    However, it is important that minimum HDR standards have been established. They include a number of parameters. I will put a plus sign for those values ​​that Xiaomi MiTV has:

    • 4K resolution
    • 10-bit color
    • Minimum 90% DCI P3 color gamut (none, see picture below)
    • There are two options for OLED and LED. For OLED, the brightness should be at least 1000 nits, but we have an LED TV, so the brightness should be more than 540 nits for white and less than 0.0005 nits for black (Xiaomi Mi LED TV 4S has a brightness of 220 nits for white and 0.6 nits for black)

    Browser on Xiaomi Mi TV

    White line. actual color gamut of Xiaomi Mi LED TV 4S, dark. DCI P3

    Accordingly, in the case of Xiaomi TV, HDR content looks visually more interesting than normal, but this should not be confused with HDR, which is played on premium TVs.

    Difference between models

    Xiaomi introduced three models with different screen sizes: 55 inches, 43 inches and 32 inches.

    • The two older models have 4K resolution, the younger one has 1366 × 768 pixels.
    • Differ in sound power: 10 W, 8 W and 5 W, respectively.
    • Older models are given six months of subscriptions as a gift, the youngest. 3 months.
    • 2 GB 8 GB of memory for the older ones, 1 GB 8 GB for the younger
    • No fiber optic port on the younger model
    • Positioning
    • Difference between models
    • What do they give as a gift?
    • Appearance and equipment
    • Specifications
    • First turn on
    • Screen
    • About HDR
    • PatchWall Review
    • Adult Tab and Search Screen
    • About Android TV
    • User experience and smart features
    • Conclusion and competitors

    First turn on

    Plugged the plug into the outlet, pressed the power button on the bottom of the TV, and the screen lit up.

    The first step is to connect the remote control. It is necessary to bring the remote control to the TV and hold down two buttons.

    In our telegram channel, I wrote that after turning on the TV and discovering the lack of batteries, I realized that I could not turn off the TV. After turning off, the power button brings up this screen, and that’s it. It does not work as “OK” or as a joystick, that is, if you click on it, this window will go out endlessly. And you could turn it off only by pulling the cord out of the socket. Everything was fine after updating the firmware.

    I really liked Google’s “quick setup”. You take your phone, say “Google, set up your device,” confirm the code, and the TV connects to Wi-Fi and your Google account. For some reason, it turned out only on BlackBerry, Samsung Galaxy Note 9 did not want to find the device in any.

    Then the TV told me in greeting what he could do.

    Review of TV Xiaomi Mi LED TV 4S 55

    About Android TV

    If you press the button with a circle on the remote control, you can open the normal Android interface. In fact, everything is the same as in PatchWall, but without thematic collections and with an emphasis on YouTube (that is, Google’s own resource). Quite boring overall.

    Installing ForkPlayer on Android and Android TV

    Installing ForkPlayer on Android and Android TV

    Important! It is not recommended to programmatically change the device ID of your Android to use it on multiple devices!

    Sony KD-49XF9005
    Sony KD-43XF7596
    Sony KDL-43WF805
    Sony KD-55AF8
    Philips 43PUS7303
    Philips 49PUS8303
    Sony KD-43XF8599
    Skyworth 32E6
    Philips 32PFS6402
    Sony KD-43XE7005
    Kivi 43UR50GU
    Skyworth 43Q3
    Sony KD-55XF8599
    Sony KD-55AF9
    Philips 43PUS7373
    Philips 55OLED803
    Kivi 24HR50GU
    Philips 43PUS7363
    TCL 55DC760
    Philips 49PUS7503
    Philips 49PUS7803
    Sony KD-49XE9005
    Gazer TV43-FS2
    Kivi 32FR50WU
    Philips 49PUS8503
    Xiaomi Mi TV 4A 65
    Sony KD-85XF8596
    Kivi 40FR50BU
    Sony KD-55XF8596
    Kivi 43UK32G
    TCL 50DP660
    Philips 55OLED903
    Kivi 55UC50GU
    Sony KD-55XE8577
    Skyworth 55G6
    Sony KD-55A1
    Sony KD-65ZF9
    MANTA 55LUA57L
    Sony KD-55XE9305
    Sony KD-60XF8305
    Philips 55POS9002
    Kivi 32FK30G
    Kivi 32HK30G
    Sony KD-55XE8505
    Xiaomi Mi TV 4 65
    Sony KD-65ZD9
    MANTA 50LUA57L
    Kivi 43UK30G
    Kivi 24HK30B
    TCL U55C7026
    Sony KDL-49WF804
    Thomson 43UD6406
    Sony KD-49XD8099
    Philips 65OLED973
    Kivi 24HK30G
    Philips 49PUS6561
    JVC LT-42M650
    JVC LT-32M550
    Kivi 55UC30G
    Sony KDL-55W808C
    Philips 49PUS6482
    Sony KD-49XD7005
    Thomson 43UC6406
    Philips 65OLED873
    Philips 65PUS8102
    Sony KD-43XE8005
    Philips 32PFS6401
    Philips 49PUS7181
    Philips 49PUS7502
    Sony KD-55XD8599
    Philips 65PUS7502
    Sony KD-85XD8505
    TCL U49P6046
    Philips 65PUS6521
    Philips 65PUS7101
    TCL U55X9006
    Sony XBR-55A1E
    Philips 55PUS8602
    TCL U65C7006
    Philips 49PUS6401
    Sony KD-50SD8005
    Philips 49PUS6432
    Sony KD-55SD8505
    Skyworth 65G7
    Sony KD-75XD9405
    Sony KD-49XD8305
    Sony KD-49XD8077
    Philips 43PUS6501
    TCL 40ES560
    TCL 32ES560
    Sony KD-55XD8005