Xiaomi Mi 11 lite call recording

Table of Contents

Main differences between Samsung Galaxy A52 and Xiaomi Mi 11 Lite

In the minimal modification, Xiaomi Mi 11 Lite is cheaper, and this is the first plus. But keep in mind: the Mi 11 Lite is not officially sold in the Russian Federation, which means that you will have to take it from serovoz or outbid. Galaxy A52 is sold officially in Eldorado, M.Video, MTS and other white stores. If we compare the of gray stores, then the cost is equal to.

Samsung Galaxy A52 or Xiaomi Mi 11 Lite – which is better? Comparison

Samsung Galaxy A52 and Xiaomi Mi 11 Lite are average, available for plus or minus equal money. But, of course, the Korean will cost a little more. Does it make sense to overpay or can you freely take the Chinese Mi 11 Lite without losing in functionality? Let’s figure it out.

Screens

Both phones feature Amoled screens with HDR10 support and a 90Hz refresh rate. Although HDR support on the Galaxy A52 is not announced, in fact it is. Diagonal plus or minus the same 6.55 inches for Xiaomi and 6.5 inches for Samsung.

Mi 11 Lite

But where there are differences, it is in the brightness of the Mi 11 Lite that it glows at as much as 826 nits, the Galaxy A52 at 794 nits. The contrast is maximum in both cases, the color reproduction is perfect. Rather, you will not notice the differences between the display matrices.

autonomy

The battery is larger on the Samsung 4500 mAh, on the Mi 11 Lite the battery is also larger than 4250 mAh. The difference in 250 mAh is not significant, but due to the reduced battery, it was possible to make the smartphone thin and light.

But we are interested in autonomy. Test results:

Samsung wins because it lasts longer in web surfing mode. And this is the key and most used scenario. But the Mi 11 Lite comes with a 33W charger (Samsung has 15W). As a result, Mi 11 Lite charges up to 58% in 30 minutes and up to 100% in 64 minutes; Samsung A52 gets just 34% in 30 minutes and 100% in 123 minutes.

Galaxy A52

The main camera sensors are different, although the resolution is the same 64 MP. The difference is that physically the sensor on Samsung A52 is larger than 1/1.73 inch, on Xiaomi 1/1.97 inch, which means that the size of one pixel will be larger on Samsung with equal resolution. Also the Galaxy A52 has OIS on the camera which is cool. Wide-angle and macro cameras are on two smartphones.

Xiaomi Mi 11 Lite Samsung Galaxy A52 Xiaomi Mi 11 Lite Samsung Galaxy A52

Xiaomi Mi 11 Lite Samsung Galaxy A52 Xiaomi Mi 11 Lite Samsung Galaxy A52

The Samsung A52 takes better photos, especially in low light. If the quality of the photo plays a role, then it is better to take the Samsung A52.

Xiaomi Mi 11 Lite. Specifications

Dimensions: 75.73 x 160.53 x 6.81 mm Weight: 157 g SoC: Qualcomm Snapdragon 732G Processor: 2x 2.3 GHz Kryo 470, 6x 1.8 GHz Kryo 470, Cores: 8 GPU: Qualcomm Adreno 618 RAM: 6 GB, 8 GB, 2166 MHz ROM: 64 GB, 128 GB Screen: 6.55 in, AMOLED, 1080 x 2400 pixels, 30 bit Battery: 4250 mAh, Li-polymer (Li-polymer) Operating system: Android 11 Camera: 9280 x 6920 pixels, 3840 x 2160 pixels, 24 frames/ sec SIM card: Nano-SIM, Nano-SIM / microSD Wi-Fi: a, b, g, n, n 5GHz, ac, Dual band, Wi-Fi Hotspot, Wi-Fi Direct, Wi-Fi DisplayUSB: 2.0, USB Type-C Bluetooth: 5.1 Navigation: A-GPS, BeiDou, GPS (L1L5), GLONASS (G11), Galileo (E1E5a), QZSS (L1L5)

Mobile network. is a radio system that allows multiple mobile devices to communicate with each other.

GSM (Global System for Mobile Communications) is designed to replace the analogue mobile network (1G). For this reason, GSM is often referred to as a 2G mobile network. It is enhanced by the addition of GPRS (General Packet Radio Services) and later EDGE (Enhanced Data rates for GSM Evolution) technologies.

CDMA (Code-Division Multiple Access). it is a channel access method used in communications in mobile networks. Compared to other 2G and 2.5G standards such as GSM and TDMA, it provides higher data transfer rates and the ability to connect more consumers at the same time.

UMTS. is an abbreviation for Universal Mobile Telecommunications System. It is based on the GSM standard and belongs to 3G mobile networks. Developed by 3GPP and its biggest advantage is to provide more speed and spectral efficiency with W-CDMA technology.

LTE (Long Term Evolution) is defined as fourth generation (4G) technology. It is developed by 3GPP based on GSM/EDGE and UMTS/HSPA to increase the capacity and speed of wireless mobile networks. The subsequent development of technologies is called LTE Advanced.

Front-camera

Smartphones have one or more front cameras of various designs. pop-up camera, PTZ camera, notch or hole in the display, camera under the display.

Information about the type of camera sensor. One of the most widely used types of sensors in mobile device cameras. these are CMOS, BSI, ISOCELL, etc.

The field of view indicates how much of the scene in front of the camera will be filmed. It depends not only on the focal length, but also on the size of the sensor. It can be calculated through the angle of view of the optics and the crop factor of the sensor. Viewing angle. is the angle between the two farthest diagonal points of the frame.

One of the main characteristics of cameras is resolution. It represents the number of horizontal and vertical pixels in an image. For convenience, smartphone manufacturers often list resolution in megapixels, indicating the approximate number of pixels in millions.

Information about the maximum video resolution that the camera can record.

Information about the maximum recording rate (frames per second, fps) supported by the camera at maximum resolution. Some of the most basic video recording rates are 24 fps, 25 fps, 30 fps, 60 fps.

Information about additional software and hardware features of the rear (rear) camera.

Information about the dimensions and weight of the device, presented in different units of measurement. Used materials, suggested colors, certificates.

Width information. refers to the horizontal side of the device in its standard orientation during use.

Altitude information. refers to the vertical side of the device in its standard orientation during use.

Information about the thickness of the device in different units of measurement.

Information about the weight of the device in different units of measurement.

Approximate volume of the device, calculated from dimensions provided by the manufacturer. Applies to cuboid devices.

Information about the colors in which this device is offered for sale.

Materials used for the manufacture of the device body.

The screen of a mobile device is characterized by its technology, resolution, pixel density, diagonal length, color depth, etc.

One of the main characteristics of the screen. this is the technology by which it is made and on which the image quality of information directly depends.

For mobile devices, the screen size is expressed by the length of its diagonal, measured in inches.

The ratio of the dimensions of the long side of the screen to its short side

Screen resolution indicates the number of pixels vertically and horizontally on the screen. Higher resolution means sharper image detail.

Information about the number of pixels per centimeter or inch of the screen. Higher density allows information to be shown on the screen in clearer detail.

Screen color depth reflects the total number of bits used for the color components in a single pixel. Information about the maximum number of colors that the screen can show.

Approximate percentage of screen footprint on the front of the device.

Information about other functions and features of the screen.

System on a chip (SoC) includes all the most important hardware components of a mobile device in one chip.

System on a chip (SoC) integrates various hardware components such as processor, graphics processor, memory, peripherals, interfaces, etc., as well as the software necessary for their operation.

Information about the technological process by which the chip is made. The value in nanometers measures half the distance between elements in the processor.

The main function of the processor (CPU) of a mobile device. is the interpretation and execution of instructions contained in software applications.

The bit depth (bits) of a processor is determined by the size (in bits) of registers, address buses, and data buses. 64-bit processors have higher performance compared to 32-bit processors, which, in turn, are more productive than 16-bit processors.

Instructions. these are commands with which the software sets / controls the operation of the processor. Information about the instruction set (ISA) that the processor can execute.

The processor core executes program instructions. There are processors with one, two or more cores. Having more cores increases performance by allowing multiple instructions to be executed in parallel.

The clock speed of a processor describes its speed in terms of cycles per second. It is measured in megahertz (MHz) or gigahertz (GHz).

The graphics processing unit (GPU) handles calculations for various 2D/3D graphics applications. In mobile devices, it is used most often by games, consumer interface, video applications, etc.

Random access memory (RAM) is used by the operating system and all installed applications. Data that is stored in RAM is lost after the device is turned off or restarted.

Information about the type of random access memory (RAM) used by the device.

Information about the number of RAM channels that are integrated into the SoC. channels means higher data rates.

The frequency of RAM determines its speed, more specifically, the speed of reading / writing data.

The main camera of a mobile device is usually located on its rear panel and can be combined with one or more additional cameras.

Information about the type of camera sensor. One of the most widely used types of sensors in mobile device cameras. these are CMOS, BSI, ISOCELL, etc.

Pixels are usually measured in microns. Larger pixels are able to capture more light and therefore provide better low-light performance and a wider dynamic range than smaller pixels. On the other hand, smaller pixels allow higher resolution while maintaining the same sensor size.

Luminosity (also known as f-stop, aperture, or f-number) is a measure of the size of a lens aperture that determines the amount of light that enters the sensor. The lower the f-number, the larger the aperture and the more light reaches the sensor. Usually, the number f is indicated, corresponding to the maximum possible aperture of the aperture.

Information about the number of optical elements (lenses) of the camera.

Mi 11 Lite Get Mi Dialer Call Recording Mi SMS

The rear (rear) cameras of mobile devices mainly use LED flashes. They can be configured with one, two or more light sources and vary in shape.

One of the main characteristics of cameras is resolution. It represents the number of horizontal and vertical pixels in an image. For convenience, smartphone manufacturers often list resolution in megapixels, indicating the approximate number of pixels in millions.

Information about the maximum video resolution that the camera can record.

Information about the maximum recording rate (frames per second, fps) supported by the camera at maximum resolution. Some of the most basic video recording rates are 24 fps, 25 fps, 30 fps, 60 fps.

Information about additional software and hardware features of the rear (rear) camera.

Information about navigation and location technologies supported by the device.

Location determination is carried out using various satellite navigation systems that track the autonomous geospatial location of the device that supports them. The most commonly used satellite navigation systems. these are GPS and GLONASS. There are also non-satellite localization technologies for mobile devices, such as EOTD, Enhanced 911, GSM Cell ID.

WiFi. is a technology that provides wireless communication for short distance data transmission between different devices.

Wi-Fi communication between devices is carried out through IEEE 802.11 standards. Some devices have the ability to serve as a Wi-Fi hotspot, providing Internet access to other devices. Wi-Fi Direct (Wi-Fi P2P). this is another useful standard that allows devices to communicate with each other without the need for a wireless access point (WAP).

Xiaomi Mi 11 Lite 5G. Specifications

Dimensions: 75.72 x 160.53 x 6.81 mm Weight: 159 g SoC: Qualcomm Snapdragon 780G Processor: 1x 2.4 GHz Cortex-A78, 3x 2.2 GHz Cortex-A78, 4x 1.9 GHz Cortex-A55 GPU: Qualcomm Adreno 642, 490 MHz RAM: 6 GB, 8 GB, 2166 MHz ROM: 128 GB, 256 GB Screen: 6.55 in, AMOLED, 1080 x 2400 pixels, 30 bit Battery: 4250 mAh, Li-polymer (Lithium polymer) Operating system: Android 11 Camera: 9280 x 6920 pixels, 3840 x 2160 pixels, 24 fps SIM: Nano-SIM, Nano-SIM / microSD Wi-Fi: a, b, g, n, n 5GHz, ac, Dual band, Wi-Fi Hotspot, Wi-Fi Direct, Wi.Fi Display, axUSB: 2.0, USB Type-C Bluetooth: 5.2 Navigation: A-GPS, BeiDou, GPS (L1L5), GLONASS (G11), Galileo (E1E5a), QZSS (L1L5)

Information about the dimensions and weight of the device, presented in different units of measurement. Used materials, suggested colors, certificates.

Width information. refers to the horizontal side of the device in its standard orientation during use.

See also  Xiaomi redmi note 2 runs out of battery quickly

Altitude information. refers to the vertical side of the device in its standard orientation during use.

Information about the thickness of the device in different units of measurement.

Information about the weight of the device in different units of measurement.

Approximate volume of the device, calculated from dimensions provided by the manufacturer. Applies to cuboid devices.

Information about the colors in which this device is offered for sale.

Materials used for the manufacture of the device body.

Front-camera

Smartphones have one or more front cameras of various designs. pop-up camera, PTZ camera, notch or hole in the display, camera under the display.

Information about the manufacturer and model of the sensor used by the camera.

Information about the type of camera sensor. One of the most widely used types of sensors in mobile device cameras. these are CMOS, BSI, ISOCELL, etc.

The optical format of a sensor is an indication of its shape and size. Usually expressed in inches.

Pixels are usually measured in microns. Larger pixels are able to capture more light and therefore provide better low-light performance and a wider dynamic range than smaller pixels. On the other hand, smaller pixels allow higher resolution while maintaining the same sensor size.

The ISO value/number indicates the sensitivity of the sensor to light. Digital camera sensors operate within a specific ISO range. The higher the ISO number, the higher the sensor’s sensitivity to light.

Luminosity (also known as f-stop, aperture, or f-number) is a measure of the size of a lens aperture that determines the amount of light that enters the sensor. The lower the f-number, the larger the aperture and the more light reaches the sensor. Usually, the number f is indicated, corresponding to the maximum possible aperture of the aperture.

Focal length indicates the distance in millimeters from the sensor to the optical center of the lens. Equivalent focal length (35 mm). is the focal length of the mobile device camera, equated to the focal length of a 35mm full-frame sensor, which would achieve the same angle of view. It is calculated by multiplying the actual focal length of the mobile device’s camera by the crop factor of its sensor. The crop factor can be defined as the ratio between the 35mm diagonals of a full-frame sensor and a mobile device sensor.

The field of view indicates how much of the scene in front of the camera will be filmed. It depends not only on the focal length, but also on the size of the sensor. It can be calculated through the angle of view of the optics and the crop factor of the sensor. Viewing angle. is the angle between the two farthest diagonal points of the frame.

One of the main characteristics of cameras is resolution. It represents the number of horizontal and vertical pixels in an image. For convenience, smartphone manufacturers often list resolution in megapixels, indicating the approximate number of pixels in millions.

Information about the maximum video resolution that the camera can record.

Information about the maximum recording rate (frames per second, fps) supported by the camera at maximum resolution. Some of the most basic video recording rates are 24 fps, 25 fps, 30 fps, 60 fps.

Information about additional software and hardware features of the rear (rear) camera.

The screen of a mobile device is characterized by its technology, resolution, pixel density, diagonal length, color depth, etc.

One of the main characteristics of the screen. this is the technology by which it is made and on which the image quality of information directly depends.

For mobile devices, the screen size is expressed by the length of its diagonal, measured in inches.

The ratio of the dimensions of the long side of the screen to its short side

Screen resolution indicates the number of pixels vertically and horizontally on the screen. Higher resolution means sharper image detail.

Information about the number of pixels per centimeter or inch of the screen. Higher density allows information to be shown on the screen in clearer detail.

Screen color depth reflects the total number of bits used for the color components in a single pixel. Information about the maximum number of colors that the screen can show.

Approximate percentage of screen footprint on the front of the device.

Information about other functions and features of the screen.

System on a chip (SoC) includes all the most important hardware components of a mobile device in one chip.

System on a chip (SoC) integrates various hardware components such as processor, graphics processor, memory, peripherals, interfaces, etc., as well as the software necessary for their operation.

Information about the technological process by which the chip is made. The value in nanometers measures half the distance between elements in the processor.

The main function of the processor (CPU) of a mobile device. is the interpretation and execution of instructions contained in software applications.

The bit depth (bits) of a processor is determined by the size (in bits) of registers, address buses, and data buses. 64-bit processors have higher performance compared to 32-bit processors, which, in turn, are more productive than 16-bit processors.

The processor core executes program instructions. There are processors with one, two or more cores. Having more cores increases performance by allowing multiple instructions to be executed in parallel.

The clock speed of a processor describes its speed in terms of cycles per second. It is measured in megahertz (MHz) or gigahertz (GHz).

The graphics processing unit (GPU) handles calculations for various 2D/3D graphics applications. In mobile devices, it is used most often by games, consumer interface, video applications, etc.

Work speed. is the clock speed of the GPU and is measured in megahertz (MHz) or gigahertz (GHz).

Random access memory (RAM) is used by the operating system and all installed applications. Data that is stored in RAM is lost after the device is turned off or restarted.

Information about the type of random access memory (RAM) used by the device.

Information about the number of RAM channels that are integrated into the SoC. channels means higher data rates.

The frequency of RAM determines its speed, more specifically, the speed of reading / writing data.

Mobile network. is a radio system that allows multiple mobile devices to communicate with each other.

GSM (Global System for Mobile Communications) is designed to replace the analogue mobile network (1G). For this reason, GSM is often referred to as a 2G mobile network. It is enhanced by the addition of GPRS (General Packet Radio Services) and later EDGE (Enhanced Data rates for GSM Evolution) technologies.

CDMA (Code-Division Multiple Access). it is a channel access method used in communications in mobile networks. Compared to other 2G and 2.5G standards such as GSM and TDMA, it provides higher data transfer rates and the ability to connect more consumers at the same time.

UMTS. is an abbreviation for Universal Mobile Telecommunications System. It is based on the GSM standard and belongs to 3G mobile networks. Developed by 3GPP and its biggest advantage is to provide more speed and spectral efficiency with W-CDMA technology.

LTE (Long Term Evolution) is defined as fourth generation (4G) technology. It is developed by 3GPP based on GSM/EDGE and UMTS/HSPA to increase the capacity and speed of wireless mobile networks. The subsequent development of technologies is called LTE Advanced.

5G or fifth generation mobile networks use a new radio access technology developed by 3GPP. It is called 5G NR and is considered the global standard for wireless interface in 5G networks. 5G NR operates in two frequency bands. FR1 (less than 6 GHz) and FR2 (over 24 GHz). In the case of FR1, 5G mobile networks use some of the frequencies used by older standards (2G and 3G). The second frequency band FR2 has less coverage but offers higher data rates than FR1.

Bluetooth

bluetooth. is a standard for secure wireless data transfer between different types of devices over short distances.

There are several versions of Bluetooth, with each subsequent one improving communication speed, coverage, making it easier to discover and connect devices. Information about the Bluetooth version of the device.

Bluetooth uses different profiles and protocols for faster data exchange, energy savings, better device discovery, and more. Some of these profiles and protocols supported by the device are shown here.

USB (Universal Serial Bus). it is an industry standard that allows different electronic devices to communicate.

There are several types of USB connectors: standard, mini, micro, On-The-Go, etc. The type of connector that the device uses.

The USB standard has several versions: USB 1.0 (1996), USB 2.0 (2000), USB 3.0 (2008), etc. With each subsequent version, the data transfer speed increases.

The USB interface in mobile devices can be used for various purposes, for example, to recharge the battery, use the device as a mass storage, host, etc.

It is no secret that it has become difficult to record conversations on Xiaomi. Firstly, smart mode unloads all unnecessary (in his opinion) programs. Secondly, a bunch of optimizers. But we know how to record phone calls, voice and screen on Xiaomi in 2022.

Welcome to Reptilicus service website!

We present you one of the best apps to record conversations on your Xiaomi phone with any version of Android. Which is very important. After all, it is on modern versions 10, 11 and 12 that it has become much more difficult to record.

The Reptilicus application will help you record:

  • telephone conversations (incoming, outgoing);
  • calls made via Telegram, WhatsApp, Viber, IMO, etc.;
  • voice messages;
  • screen shots;
  • ambient sound (voice recorder);
  • and much more.

How did we achieve this? Based on their own experience and the work of our testers, who tirelessly tested Reptilicus. They recorded conversations on Xiaomi Redmi Note 9, Note 8 pro, POCO, Mix 4, Mi 10 and 11 Pro, Ultra, X, Lite, Redmi K40 series and K30 series, Redmi 10X series and others phones. We also worked with Xiaomi devices with Android 10, 11 and 12 versions, which are the most “difficult”.

From this valuable experience, we have accumulated a complete installation guide (the link can be taken in the chat with consultants). there is a separate chapter on settings on the Xiaomi phone.

A little about installation

To record a conversation on Xiaomi, you must:

In simple Russian language and with the help of screenshots, the guide shows in detail how to record a conversation on a Xiaomi phone, even if it has Android 12 version.

How to record a conversation on a Xiaomi phone?

Let’s first define that conversations are different:

  • telephone conversation. a call made through a mobile connection;
  • audio call. a conversation made over the Internet;
  • voice messages. a conversation consisting of separate audio messages is carried out in instant messengers and social networks;
  • conversations near the phone. then the voice recorder acts as a recording device.

Based on what you need to record a conversation on Xiaomi, the settings will depend. After installing the special module, you need to change the recording source. Further (at your request and according to our recommendations) turn off the smart mode and make the application friends with optimizers.

There are really a lot of settings to record a call on Xiaomi in 2022. However, they can all be done within 20-30 minutes. If you have any questions, you can always contact our round-the-clock technical support or chat with online consultants who work during the daytime.

How to Record Xiaomi Android Voice Recorder?

The recorder works in several modes:

On command. As soon as you send a command to record the surround sound, the recorder immediately turns on. After the specified time has elapsed (you specify it yourself), the file with the record will come to your phone or personal account.

At the designated time. The voice recorder will start recording the conversation (in the office, room, car, store, coffee, etc.) on Xiaomi strictly at the time you set without any commands. Automatically. And it will also automatically transfer the file with the recording of the conversation to your phone.

Right after the phone call. Such a function is needed in order to record a conversation on a Xiaomi phone after a person answers the call.

As you can see, you can also record voice recorder conversations on Xiaomi Redmi Note 9, 10 or 8 pro, the main thing is to install our program. Attention! The recorder will work even without a special module!

How to Record Xiaomi Android Screen?

Let’s mentally divide the devices into old and new ones, then we get this picture.

  • You can record a screenshot on older Xiaomi (Android 9 and less) without any problems by simply installing the Reptilicus program.
  • But you can record the screen of a modern Xiaomi phone (Android 10) only with root rights, otherwise you will receive notifications that screenshots are being taken.

Capturing a screenshot of the Xiaomi Redmi Note screen with Android 10, 11 and 12 versions is a bit problematic, but still real. As the saying goes: “If you suffer for a long time, something will work out”.

In the end, I would like to note the main aspects of how you can record calls to Xiaomi in 2022:

Firstly, just install our application on your phone, and just turn off the smart mode, that’s all the wisdom.

Secondly, a bunch of optimizers also do not interfere with the operation of our software, which, after installation, will record telephone conversations and audio calls on your smartphone.

Thirdly, the site has a detailed guide that can really help if you don’t know how to record a conversation, voice or screen on Xiaomi Redmi.

Reptilicus logger application will help you record all your telephone conversations (and not only) even on the most “complex” device, such as Xiaomi with Android 12!

Recording calls through third-party applications

Despite the fact that each next version of the firmware brings a lot of new features, after the update, some smartphones are unstable. This happens when the user ignores the preparation step.

It happens that on the Xiaomi Mi 11 Lite 5G (Youth Edition) phone, the pre-installed application for making calls does not have the audio recording function. This happens from time to time and depends on the specific firmware version. In such a situation, you can bypass the restriction by installing third-party software. For example, Call Rec programs:

  • Open the Google Play App Store.
  • Use the search bar to find CallRec and click the “Install” button.
  • After installation, run the program and agree to the terms of use.
  • Go to the “Recording Rules” section and configure the settings for recording telephone conversations as you wish.

After completing the above steps, all calls will be automatically recorded. At the end of the conversation, you only need to agree or refuse to save the call.

How to record a conversation on Xiaomi Mi 11 Lite 5G (Youth Edition) using built-in tools

Xiaomi Mi 11 Lite 5G (Youth Edition), like any other Android smartphone, has everything you need to record a call without the use of auxiliary tools. To perform the operation, you will need to call the subscriber or answer an incoming call. After that, the call menu will open in front of the owner of the device.

Here you need to click the “Record” button so that it is highlighted. This will be direct evidence that the conversation is being recorded. And it does not matter whether a person is talking through a conversational or multimedia speaker. In any case, recording is done at the system level.

Please note that the “Recording” button is not always displayed on the main screen of the call menu. Often it has to be activated through the additional item “”. Therefore, it is recommended to check all the settings of the standard dialer.

How to enable call recording on Xiaomi Mi 11 Lite 5G (Youth Edition)

Despite the large number of additional features, modern smartphones continue to be used to make calls. And often users need to record a conversation on Xiaomi Mi 11 Lite 5G (Youth Edition). This will allow the owner of the device to present the MP3 file of the conversation as a weighty argument in the dispute, as well as just to clarify individual details of the call.

Recording calls on Xiaomi Mi 11 Lite 5G (Youth Edition) can be done in several ways. The choice of a specific option depends on the firmware version and other factors affecting the functionality of the device. It is recommended to study all the ways of fixing a conversation at once in order to choose the most convenient one.

How to find and play a recorded conversation

After the user manages to record on Xiaomi Mi 11 Lite 5G (Youth Edition), the question of further listening to the conversation will arise. To do this, you need to find a fixed call.

See also  How to insert a card in Xiaomi

If the recording of telephone conversations was made using the built-in tools of Xiaomi Mi 11 Lite 5G (Youth Edition), you need to open the file explorer and move to the “Recorder” folder.

The next step is to open the “Call” directory, where any conversation record made through a standard dialer automatically falls.

In this folder, you can see a list of MP3 files named in random order. Sometimes the date of the entry is used as the name. To play a recorded call, open the corresponding file.

In addition, you can find the recording file through the standard Music application. Together with the songs stored in the memory of Xiaomi Mi 11 Lite 5G (Youth Edition), recorded calls will be displayed here.

If there are no recordings of conversations in the audio player, it means that in the settings of the Music application there are restrictions on the length or size of automatically added tracks. The parameters can be changed and the recorded MP3 files will be displayed. In addition, you can use any third-party audio player from Google Play to listen to the call.

Finally, in a situation where the CallRec application was used to record a conversation on Xiaomi Mi 11 Lite 5G (Youth Edition), you need to look for the call file in the program itself. To do this, open it and move to the section “All”, “Incoming”, “Outgoing” or “Favorites” depending on the type of call.

If you use other software to fix the call, you should check with the developer for the location of the files. But most often, the entries automatically fall into the interface of a third-party program or are located in its folder located in the internal storage of the smartphone.

How to record a conversation on Xiaomi Poco X3 Pro using built-in tools

Xiaomi Poco X3 Pro, like any other Android smartphone, has everything you need to record a call without the use of auxiliary tools. To perform the operation, you will need to call the subscriber or answer an incoming call. After that, the call menu will open in front of the owner of the device.

Here you need to click the “Record” button so that it is highlighted. This will be direct evidence that the conversation is being recorded. And it does not matter whether a person is talking through a conversational or multimedia speaker. In any case, recording is done at the system level.

Please note that the “Recording” button is not always displayed on the main screen of the call menu. Often it has to be activated through the additional item “”. Therefore, it is recommended to check all the settings of the standard dialer.

Recording calls through third-party applications

Despite the fact that each next version of the firmware brings a lot of new features, after the update, some smartphones are unstable. This happens when the user ignores the preparation step.

It happens that on the Xiaomi Poco X3 Pro phone, the pre-installed calling application does not have the audio recording function. This happens from time to time and depends on the specific firmware version. In such a situation, you can bypass the restriction by installing third-party software. For example, Call Rec programs:

  • Open the Google Play App Store.
  • Use the search bar to find CallRec and click the “Install” button.
  • After installation, run the program and agree to the terms of use.
  • Go to the “Recording Rules” section and configure the settings for recording telephone conversations as you wish.

After completing the above steps, all calls will be automatically recorded. At the end of the conversation, you only need to agree or refuse to save the call.

How to enable call recording on Xiaomi Poco X3 Pro

Despite the large number of additional features, modern smartphones continue to be used to make calls. And often users need to record a conversation on Xiaomi Poco X3 Pro. This will allow the owner of the device to present the MP3 file of the conversation as a weighty argument in the dispute, as well as just to clarify individual details of the call.

Recording calls on Xiaomi Poco X3 Pro can be done in several ways. The choice of a specific option depends on the firmware version and other factors affecting the functionality of the device. It is recommended to study all the ways of fixing a conversation at once in order to choose the most convenient one.

How to find and play a recorded conversation

After the user manages to make a recording on Xiaomi Poco X3 Pro, the question of further listening to the conversation will arise. To do this, you need to find a fixed call.

If the recording of telephone conversations was made using the built-in tools of Xiaomi Poco X3 Pro, you need to open the file explorer and move to the “Recorder” folder.

The next step is to open the “Call” directory, where any conversation record made through a standard dialer automatically falls.

In this folder, you can see a list of MP3 files named in random order. Sometimes the date of the entry is used as the name. To play a recorded call, open the corresponding file.

In addition, you can find the recording file through the standard Music application. Together with the songs stored in the memory of Xiaomi Poco X3 Pro, recorded calls will be displayed here.

If there are no recordings of conversations in the audio player, it means that in the settings of the Music application there are restrictions on the length or size of automatically added tracks. The parameters can be changed and the recorded MP3 files will be displayed. In addition, you can use any third-party audio player from Google Play to listen to the call.

Finally, in a situation where the CallRec application was used to record a conversation on Xiaomi Poco X3 Pro, you need to look for the call file in the program itself. To do this, open it and move to the section “All”, “Incoming”, “Outgoing” or “Favorites” depending on the type of call.

If you use other software to fix the call, you should check with the developer for the location of the files. But most often, the entries automatically fall into the interface of a third-party program or are located in its folder located in the internal storage of the smartphone.

How to enable call recording in MIUI 11 on Xiaomi (Redmi)

Users of Xiaomi (Redmi) smartphones understand that the MIUI 11 skin is not only beautiful and convenient, but also has enough built-in features to provide the necessary level of functionality even for a demanding owner.

In this article, I will show you how to record phone conversations in MIUI 11 using the built-in feature without having to install a third-party app.

All that is required of you is to enable the save function, Xiaomi will do the rest.

Launch settings, find the item “Applications”. Select “System Applications” from the list. Now click on Phone. You see a set of options, among which the desired “Call Recording” is hidden. We have reached the goal, activate the “Record calls automatically” switch. The selection setting is unlocked below, you are free to choose to save all negotiations, or only from certain numbers.

How to Find Call Recordings in MIUI 11

Saving conversations done, but how to find them to copy to a computer or transfer to another person?

Launch the system application “Explorer”. Select the folder display mode from the top menu. Find the “MIUI” folder. Hidden inside is the “sound_recorder” folder. All records of telephone conversations will be saved here, in my case it is empty, because. I disabled this option for myself. Remember that by law you must notify the interlocutor that the recording is being made at the very beginning of the conversation. It is not scary if you are negotiating with acquaintances, but if you are talking with representatives of legal entities and do not make this warning, and then the records come up, or it becomes reliably known that the very fact of the recording was, you will be in big trouble with the law.

How to record screen video on Xiaomi

One day you will need to record a video from the screen in order to capture a system error or gameplay. In the first case, a regular camera will do, and then, in the old fashioned way, this is enough to send a file to some forum. But what if you need a more serious result? Various programs of dubious quality come to mind straight from the Play Store.

Where is the application

There is a shortcut on the desktop or in the Tools folder called Screen Recorder. It looks like this:

Let’s get to grips with the settings

Video resolution. I advise you to set the maximum so that the viewer does not have to look at small details.
Video quality. Will affect the video file size and device performance during recording. If there are no problems with either, set the maximum, otherwise try to reduce, but not too much.
Frame frequency. Frames per Second (FPS). the number of frames to be changed per unit of time. At a value of 15 there will be a quick slide show. At 24, the human eye will perceive the stream as video. Thirty is a more comfortable threshold. If there are no performance issues, choose 30.
Video orientation. Affects the position in which the phone will record video. I don’t think there should be any questions.
Sound source. The option is responsible for where the sound will be recorded from. Speaker. in this case, what the application publishes will be heard on the video. “Microphone” will let you hear your Комментарии и мнения владельцев.

  • End after blocking. A convenient feature, thanks to which when you press the power button, the video will turn off;
  • Visualize gestures. A round cursor will be visible on the video;
  • Render navigation buttons. After recording, pressing the “menu” buttons, etc. will be visible.

Let’s start shooting

In the main screen of the application, click on the red button with the video camera icon:
Now open the desired app or start recording right away. Don’t worry, the icon won’t disappear until you click the cross. To start recording, click on the red circle:
To stop recording, block the device if you enabled the corresponding option, or click on the red square:

Where are the videos stored?

Alternatively, immediately after recording, click on the pop-up window with the video. Then edit the file or immediately send it to friends.

If you want to access the video later, follow these steps:

Find the “Screen recorder” folder:

Here, in fact, are all the main points. Of course, no one canceled third-party solutions, however, in our opinion, the built-in functionality perfectly copes with its tasks, and also loads the system less.

How to find and listen to a recording of conversations on Xiaomi

If the information voiced when making a phone call is needed for later playback, it is recommended to write it down. For this purpose, the function of recording telephone conversations on Xiaomi is intended, which refers to the built-in version. It is available for every kind of MIUI shell.

It should be borne in mind that the legislation of the Russian Federation imposes certain restrictions on recording calls, because this action falls under the 23rd article of the constitution of the Russian Federation. According to it, the citizens of the country have every right to demand the secrecy of correspondence, negotiations by telephone, mail, telegraph and other communications. Accordingly, the owner of a Xiaomi smartphone can record the conversations, however, only he has the right to listen. Please note that it is not allowed to disclose these records, otherwise it is treated as a violation of the law.

Where is the conversation recorded on Xiaomi

You can access the saved files in the following way:

How to enable call recording on Xiaomi

By clicking on the “Calls” icon, you find yourself in the dialer submenu. At the bottom is the “Menu” button.

After clicking, the sub-item “Settings” appears.

Then a menu will appear to your attention, the second item where there is “Call Recording”. Activate the function (the inscription “Enabled” will appear). In order for it to be carried out automatically, you need to select the “Automatic recording” item. If you want to receive information that the call is being recorded, then click on the slider located at the top right of the screen, which is responsible for displaying notifications.

For the convenience of users, there are 3 options for the mode: each phone call, exclusively selected contacts or unknown numbers.

Third Party Solutions for Recording and Listening to Phone Calls

Thanks to the functionality of the Android OS on Xiaomi smartphones, you can use third-party programs, which are easy to find on Google Play. Their advantage is that you can choose an application that best meets your needs in terms of interface and functionality, as well as allowing you to make individual settings.

There are also certain disadvantages, because downloaded applications cannot guarantee the smooth operation of the software. Another disadvantage is the higher battery consumption.

Automatic Call Recorder

A positive feature is that the program is distributed free of charge. It is easily configured “for itself”, rarely causes errors in the OS. Please note that you will be constantly offered a variety of ads, which you can get rid of only by purchasing a paid version.

Recordings of conversations become available to the user in automatic mode with subsequent saving to Google Drive and Dropbox. In order to simultaneously receive information from a mowing line and a microphone, in the source settings, select the Voice Communications item.

Call U

It is characterized by an excellent level of sound reproduction, so there are no problems when listening to saved files. The information is saved to the cloud, you can protect it with passwords, and you can also choose to receive recordings only from selected contacts for free. For the convenience of users, it is possible to add text notes, as well as the save format: MP3 and WAV. The application is free.

The program is recommended to be downloaded for devices with Android version 6 and above. Among the shortcomings, I would like to note that there is no voice recorder, and the last updates were carried out more than 3 years ago. Pluses lie in really flexible settings.

In order to listen to the saved information, you only need to go to the place where the recorded data is stored, for example, in the cloud or the internal memory of the phone.

All recordings are stored in the phone’s memory in the folder: MIUI/sound_recorder/call_rec. At any time, by going to this folder, you can listen to the recordings and delete those that are of no interest. To deactivate automatic recording of conversations, just disable the item “Record calls automatically”.

To record a conversation that has already started:

  • During a call with a subscriber, press “Add call” on the screen
  • Call 333.
  • Merge calls, after which the recording will start

As a rule, the voice recorder is located in the standard “Tools” folder. It cannot be deleted, so users can only move it to some personal folder. If you are using the voice recorder for the first time, the system will ask for various permissions (file access, call recording, etc.)

In Explorer, look for the Recent tab and go into it (depending on the firmware and version of the operating system, the appearance of the application may be different). Having found the necessary file, long press it, select it and select the Properties item in the menu. In the window that opens, the path where the required file is stored will appear.

Click on “Explorer”. After that, in the upper right corner there will be an inscription “Storage”, by clicking on which, folders sorted alphabetically will be highlighted. The user needs to find the MIUI folder. Next, select the “sound_recorder” folder, then “call_rec”, in which the recordings from the voice recorder are stored.

And now, Google has begun a large-scale distribution of the feature for a variety of smartphones from the Chinese manufacturer, including Redmi Note 8 Pro, Note 9 Pro, Note 9S, Xiaomi Mi 9T Pro and others. Users confirm in the official Xiaomi communities that the call recording function has become available in Google Phone.

Long-awaited call recording returned to Xiaomi and Redmi smartphones

The call recording feature has become available again on many Xiaomi and Redmi smartphones. All thanks to a recent update to the Google Phone app.

The proprietary Google Phone dialer app is pre-installed as the main dialer for the Google Pixel line, pure Android smartphones under the Android One program and Xiaomi in several European countries.

See also  How to open Xiaomi SIM card tray

Xiaomi smartphones are known for their MIUI skin, which offers an enhanced feature set compared to pure Android. Call recording was one of those features.

However, in early 2020, Xiaomi was forced to give up some features in MIUI due to privacy laws and restrictions in a number of regions, the company’s smartphones began to use Google services and applications more intensively. In particular, the pre-installed MIUI Dialer application (dialer) was replaced with a standard for Android branded Google Phone. As a result of these innovations, the Call Recording function in MIUI has become unavailable.

In April, a new version of Google Phone’s proprietary dialing application with added call recording functionality arrived to Nokia smartphone users in India. It was expected that, having started with Nokia, the developers would not stop and release the corresponding update for other smartphones, including Xiaomi.

However, until now, call recording has been available only to Xiaomi and Redmi users with ROMs for China, Indonesia and India, while the global and European ROMs did not offer this feature.

And now, Google has begun a large-scale distribution of the feature for a variety of smartphones from the Chinese manufacturer, including Redmi Note 8 Pro, Note 9 Pro, Note 9S, Xiaomi Mi 9T Pro and others. Users confirm in the official Xiaomi communities that the call recording function has become available in Google Phone.

autonomy

Xiaomi 11 Lite 5G NE is equipped with a 4250 mAh battery. There is a 33W fast charge that charges the smartphone from 0 to 100% in about an hour. With an average base load of YouTube videos, several hours of gaming, social networking, calls, music on Bluetooth headphones, surfing the Internet, and so on, the smartphone easily “lives” from morning to late evening. For two days it will not be enough, except to significantly reduce the use, but it is unlikely to be discharged before lunch, except perhaps only with games.

For such a minimum thickness, this is a worthy result. Initially, I thought that I would have to charge it, if not for dinner, then at four or five in the evening, but the smartphone easily lasts until nine and later, when used from eight in the morning.

Xiaomi 11 Lite 5G NE display

Xiaomi 11 Lite 5G NE has a bright 6.55-inch AMOLED screen with a resolution of 2400 × 1080 and a pixel density of 402 ppi. The display is protected by Corning Gorilla Glass 5 on top.

The base screen brightness is 500 nits and the maximum brightness is 800 nits. The display has 10-bit color depth and a refresh rate of 90Hz (touchpad sampling rate 240Hz). Declared support for technologies TrueColor, Dolby Vision and HDR10. DCI-P3 color space coverage is 100%. In the upper left corner there is a round cutout for the front camera.

In the smartphone settings, you can choose your preferred refresh rate: 60 or 90 Hz. For users of devices with a standard screen refresh rate, the 90 Hz option will be much smoother and faster. But if you have already seen models with 120 Hz screens, then the difference between 60 and 90 Hz is not so noticeable.

The menu has light and dark themes. They are included on a permanent basis or on a schedule. A customizable Always-On-Display function is also available, but it only works for the first ten seconds after the screen is locked.

If desired, the color scheme and text size are selected in the settings, and the reading mode is also turned on. In addition to the standard use of warm colors for less eye fatigue, there is a “Paper” mode, in which the background is additionally changed to a paper texture. In this form, it is best to read books, news or articles from websites.

The display of Xiaomi 11 Lite 5G NE turned out to be bright and juicy. True, he has a fairly strong PWM, if you make the brightness below average. Therefore, it is best to use not auto brightness, but choose manual control and set it to 80-90% or to the maximum.

On a sunny day, everything is perfectly visible on the display, including text, a video or a photo. Very handy Paper mode if you read a lot of books on your phone.

Xiaomi 11 Lite 5G NE received stereo speakers. For such a compact and thin model, the sound was unexpectedly loud. But, as is often the case in such cases, all this lacks volume and low frequencies. But the middle stands out well, as well as vocals with a voice, so it’s nice to watch Netflix and YouTube on the phone.

The speaker for calls is loud and clear. He doesn’t have any super qualities, but he didn’t cause any complaints either.

The model claims to support Hi-Res sound in 24-bit/192 kHz format. True, I did not test the smartphone on expensive wired headphones, but I tested it with several TWS models. As a result, no revelations came out, but maybe it will work with a compact sound card. With a basic Bluetooth connection (version 5.2 here), the smartphone does not make the headphones sound better or worse.

Xiaomi 11 Lite 5G NE review: thin and light smartphone with AMOLED screen and Wi-Fi 6 support

Xiaomi has released a new smartphone called 11 Lite 5G NE. The last two letters in the title stand for New Edition, as the Chinese giant already has the 11 Lite and 11 Lite 5G models. How much the device differs from its predecessors, what are its advantages and disadvantages, read in our review.

Packaging and equipment

Xiaomi 11 Lite 5G NE comes in a white box with engraved golden letters. Inside, in addition to the smartphone itself, there is an additional protective film (one is already pasted on the screen), a transparent silicone case, documentation, a USB A to USB C cable, a 33 W power supply, and a 3.5 mm audio adapter for a USB Type-C port.

Design and Usability

Xiaomi 11 Lite 5G NE looks similar to the previous models of the series: rounded corners and ends of the case, a flat display, a large main photo module with a chrome ring and an auxiliary widescreen one on the extended rear panel. There are also inscriptions Xiaomi and 5G.

The device has plastic ends and a back cover. In our case, the color of the model is turquoise. matte with overflow at the back and glossy on the sides.

On the right side of the Xiaomi 11 Lite 5G NE, there are volume keys and a lock button combined with a fingerprint sensor.

On the bottom, there is a USB C port, a speaker, another microphone, and a SIM card slot. You can put two of them there (nano-SIM) or one plus a memory card. There is no 3.5mm audio jack. To listen to music, there is a Bluetooth module or the adapter described above in the kit.

The smartphone turned out to be thin and light – the thickness is 6.81 mm and the weight is 159 grams. The device is almost not felt in the hand, it lies comfortably in the palm of your hand and there is no feeling that it is about to slip out. Although with a case, of course, it is calmer and more reliable, and the grip with hands is better.

Xiaomi 11 Lite 5G NE is so light that sometimes I looked for the device in my jacket it seemed to fall out. The light weight also keeps your hands from getting tired during prolonged use, such as gaming or browsing social networks.

The side buttons are set slightly above the middle, which is universal and convenient for almost any hand size. The fingerprint scanner is lightning fast. The test with wet hands passes through once or twice, so it is better to touch the sensor with dry fingers.

On the matte back cover, dust is almost invisible, as well as fingerprints and other traces of use. All this is perfectly visible on the glossy ends, but their area is insignificant, so you can see much less.

Performance, software and games

Xiaomi 11 Lite 5G NE is powered by a fairly new Qualcomm Snapdragon 778G octa-core processor with Adreno 642L graphics. The chip is made using the 6nm process technology. RAM can be 6 or 8 GB, and permanent 128 or 256 GB.

The smartphone is gaining good numbers in various tests (GeekBench 5, AnTuTu), but the model has quite strong throttling, which can be seen from the tests below and the feeling of using it in games.

Xiaomi 11 Lite 5G NE runs modern “heavy” games without any problems at medium and even high graphics settings with a frame rate of 60 fps and higher. The device was tested in Call of Duty Mobile, Wild Rift, Genshin Impact, World of Tanks, Shadogun Legends.

After half an hour or a little later, the model noticeably heats up in the hands, and in games, subsidence in fps begins. Of course, all this does not reach critical numbers, but comfort is reduced. Most likely, the matter is in the same minimum thickness and tightly fitted components inside, which does not allow the processor to cool normally.

The smartphone supports the new Wi-Fi 6 (802.11ax) standard. He, of course, has an NFC module for contactless payments, the latest Bluetooth 5.2 and an infrared port for “communicating” with technology.

Xiaomi 11 Lite 5G NE is controlled by the proprietary MIUI 12.5 shell based on Android 11 OS. The smartphone will be among the first to update to MIUI 13 soon. The interface works quickly and clearly. No stuttering or stuttering after a week of use.

Launching and exiting applications, the main screen, the menu and the list of programs work smartly, if not lightning fast. There are no ads, there are a lot of built-in applications, but they are immediately arranged in folders, so they can be quickly removed or simply left alone for a while.

I did not like the huge number of notifications from the start. In an hour, a wild number of alerts came to the smartphone, most of which are sent by built-in applications or systems. Therefore, you will first have to tinker a bit in the settings to turn it all off.

Cameras Xiaomi 11 Lite 5G NE

Xiaomi 11 Lite 5G NE is equipped with a triple main camera with 64, 8 and 5 MP sensors. The main module is Samsung GW3 S5KGW3. It takes basic pictures at a resolution of 4640×3472 pixels (16MP), but it has a Hi-Res mode when all 64MP are turned on and then the photos come out in a format of 9280×6944 pixels.

An 8MP ultra-wide-angle module is here Sony IMX355. He failed to replace the main sensor, so it shoots well, but it makes a lot of “noise” even if, for example, it is daytime, but the sun has gone behind the clouds. Samsung S5K5E9 third telemacro module with 5 MP resolution.

The front camera of the Samsung ISOCELL S5K3T2 model is 20 megapixels. It takes pictures at a resolution of 5184×3880 pixels.

The camera shoots 4K videos at 30 frames per second. There is no optical stabilization, but there is electronic stabilization and it is of very high quality. Of course, it is difficult to fully replace the optical one, but it dampens shaking very well when walking and when turning the camera. An example of shooting a video is shown below.

The main and front cameras take standard photos for the middle price category. It’s not a shame to show such pictures to friends and put them on social networks, but you still won’t be able to get supermega photos.

But you can surprise yourself and others with additional features in the Camera application. There are standard “Photo”, “Video”, “Portrait” and a convenient “Pro” mode, as well as more than a dozen formats in the “” tab.

Among them, it is worth highlighting good night shooting, panorama, dual video from the main and selfie cameras, as well as shooting with long exposure, which I have not seen before in devices in this price category.

Cost and competitors

The minimum price tag of Xiaomi 11 Lite 5G NE starts from 9149 hryvnia. In my opinion, this cost is too high, since I expected to see a price tag of about 8,000 hryvnia for a smartphone with such characteristics. The fact is that in the category from 9000 hryvnia, the model has many serious competitors. The first one that comes to mind is POCO F3. 120Hz screen, bigger battery, cooler processor, but worse cameras and thicker case.

The second competitor is Realme GT Master Edition. 120Hz screen, 65W charging, in-screen fingerprint scanner, 32MP front camera and 3.5mm audio jack. Also worth considering is the Samsung Galaxy M52 5G. The model has a weight of only 20 grams more, but a 120 Hz screen, similar high-quality cameras, a 5000 mAh battery and a 32-megapixel selfie module.

Learning to enable recording on Xiaomi in 2022

Today we will learn how to record calls, sound (voice recorder) and voice messages on Xiaomi. Only 30 minutes, and you will set automatic recording of conversations. Recording a conversation on Xiaomi in 2022 is not a problem with the VkurSe program!

How To Auto Call Recording in mi 11 lite, mi 11 lite Call Recording Setting, Redmi 11 lite

So, you need a recording of a telephone conversation, but your Xiaomi does not write. Or writes, but then you will not find where these files are. Or maybe you need a recording of the environment (well, to hear what’s going on around the phone), but you can’t turn on the voice recorder remotely?

If this is all about you, then our program will help you record conversations and give it all to listen to at a convenient time for you.

How the program is being installed

The VkurSe control program is a multifunctional application that allows you to control your Android smartphone.

Installed on the Xiaomi phone, the recording of the conversation will be transmitted to the office. The account opens immediately after registration. On the site you can download the VkurSe installation file for free. The link is freely available with no restrictions on the number of downloads.

There is also an Installation Guide. if you need a detailed guide (for certain brands of phones Xiaomi Redmi Note 9, Note 8, pro, POCO, Mix 4, Mi 11 Pro, Ultra, X, Lite, etc.), then write to our online.consultants. they will give a link.

Attention important! Link, guidance, consultation and opening an account. it’s all free! Trial period is free!

Very important! If you are asked for money for a link, leave immediately. these are scammers. Unfortunately, there are many. be careful!

What will you get from the program

Using our VkurSe program, you can enable records on Xiaomi:

  • telephone conversations;
  • voice messages;
  • calls made via Telegram, WhatsApp, Viber, etc.;
  • ambient sound (voice recorder);
  • correspondence in social networks and instant messengers;
  • and much more.

Our call recording program VkurSe works with a special module that is installed directly during the installation of the program itself. It allows you to enable recording on Xiaomi Android 12.

Now you will not have a question: “Where are the recordings of the voice recorder on Xiaomi?”. All entries will be transferred to your personal account. You can go there at any time convenient for you and listen to these files.

In addition, there is a unique opportunity. recording calls to Xiaomi (all files from the office) You can download to your flash drive or laptop.

Attention! Our consultants will tell you in detail how to remove the warning about recording a conversation on Xiaomi, and it is also shown in the pictures in our step-by-step guide.

As you can see, automatic recording of Xiaomi conversations is quite feasible with our VkurSe program, even if the phone has 12 Android.

Although the Xiaomi phone itself may not record, with the help of our program you will always be aware of who called, when they called, what they talked about and how long the conversation lasted. And this applies not only to phone calls, but also to voice and conversations near the phone.

Now you know how to turn on / record calls / conversations automatically on Xiaomi. install the VkurSe program, download a special module and receive files with a record in your account. this is very convenient!

Mi 11 Lite: How to Record Calls and Share Call Recording


Denial of responsibility | Contacts |RSS | SE | EN | BR | DE