What to do if the wire does not charge the iPhone

Iphone or iPad is not charged. Why and what to do?

Categorical hello to everyone! Imagine that you have connected a charger to your iPhone or iPad and found that for some reason there is no charge. What is the reason?! Adapter? Yes, hardly wire? A little hesed, but he is still good! In general, outwardly everything seems to be in order, but “the process does not come from the word at all”. It does not work to recharge the device.

A familiar moment? I hope that not, because this situation is able to plunge into a panic of every unprepared user. And almost any. Prepared. But you should not worry too much: after getting acquainted with this instructions, you will find out why the “apple” gadget suddenly stopped charging and what to do in such a situation.

And immediately move to the most important.

These are the main reasons why the iOS device cannot be charged from the network or computer:

wire, does, charge, iphone
  • Cable of charger cable. One of the most common options. Often they turned the cord “into a lump”? Kept it “how it got”? It is possible that the integrity of the compounds was violated. Make sure that the cable is really broken, you can connect it to another iPhone/iPad. If the cable does not show “signs of life” based on the results of one of the tests mentioned, you will have to buy a new cord or look for craftsmen who can fix the existing. The second option is less preferable, t.To. Cables restored in “artisanal conditions” usually serve extremely few.
  • Broken or contaminated connector for charging. If everything is in order with the charger, but the iPhone or the iPad does not respond to its connection in any way, the essence of the problem may be directly in the port. First, try to carefully clean the port at home, for example, with a toothpick. Important! Use metal objects for cleaning is strictly prohibited. Damage contacts. If the contacts are already damaged, then the only way to get out of this situation is to go to the service center in order to replace the broken element.
  • The use of non-original USB cables (although you can also be charged with their help). At first, non.Original cords are usually completely tolerantly cope with their duty (although far from always), however, the service life of the Chinese (or any other non.Original) cable will be much more modest compared to the original “colleague”. As practice shows, this kind of savings on components ultimately “comes out sideways”.
  • The power of the charger block is not enough. This is no longer about the wire, but about the block that connects to the outlet. They are also with different output power, the most common. 0.5 A, 1 A and 2 A. It is important to remember that for the iPhone the output power of the charger should be at least 1 ampere, for the iPad. At least 2 amperes. With any lower indicators, the devices will either refuse to charge, or the charging icon appear. But it will go very slowly. Which will negatively affect the battery resource (find out how much the charge should hold the new battery).
  • Problems when trying to charge iPhone or iPad from a computer. To begin with, we understand. Is there a connection to PC, if not, then we read here. Further in the case when your “apple friend” is normally charged from the network, and when connecting to the computer, charging goes extremely slowly or does not happen at all, then this is what you need to remember and know. On most PCs and laptops, the USB detachment gives out 0.5 amperes, which means the iPhone will be charged more slowly than usual, but the iPad will not be at all (in fact the charge will certainly go, but so slowly that in order to see the effect will have to wait long for a long time ). Well, we try to connect to various USB ports, perhaps the problem is in them.
See also  How to upload photos in iCloud from iPhone

Perhaps these are all the main points related to the malfunction of the iPhone or iPad.

There are also a couple of important points that must be taken into account with this problem.

Important ! In the case when the device continues to refuse to charge after all the above actions, and he has not yet expired, feel free to hand over the iPhone (iPad) under the warranty.

Let professionals understand the reasons for the lack of charge. Employees of the Apple official service center.

How to repair iPhone Charging cable, How to repair iPhone USB cable

Important ! The malfunction can be in the battery itself. After all, its resource, of course, is not infinite. How to check the current battery capacity and find out the most correct data? This is easy to do even in “home”. This is a detailed instruction (with pictures)!

Or not? You have left or have questions? I would like to share personal experience or tell my story? Welcome in a comment. We will definitely discuss what is happening to your iPhone (iPad), and, of course, we will try to find a suitable solution!

P.S. Place Like, click on the buttons of social networks and the problems with charging will disappear. This is a proven way to combat any malfunction for years!:)

How to use not certified Lightning Cabble (not from Apple)

Starting with iOS 7, the insidious guys from Apple were forbidden to use iPhone, iPad unofficial Lightning cable for charging and synchronizing. When connecting this, you will see the following message:

wire, does, charge, iphone

This cable or accessory is not certified, so the reliability of its work with this iPhone/iPad is not guaranteed.

  • We include on the network from the USB/plugs
  • Connect Lightning Cabble to iPhone/iPad
  • We see a flashing window that we are villains and use an unusual cable, click “Close”
  • Do not turn off the device, pull out the cable from it and connect it back to the iPhone, iPad
  • Again click “close”, observe how the gadget begins to charge.

There is another way to get around protection, sometimes in the Cydia repositories there is a Jailbreak-Twik Unauthorized Lightning Cable Enabler, which solves the problem. Due to poor work, Twik does not have a permanent residence.

Lightning cable broke

Everything is obvious here. If you are not a fan of wave for a soldering iron, then we calmly go to buy a new cable. The only thing that can be advised in this situation is to think for the future how to extend the life of a Lightning cable.

To do this, we need two springs from ordinary ballpoint pens, a little patience and accuracy.

The essence of this method is that the spring is metal and it simply does not allow the wire to bend so much after that the wire is deformed over time and fails. In this case, the spring shines and only decorates the wire, unlike island.

You can read more about this method in this article (author AlexSt03).

If you did not find an answer to your question or you didn’t succeed, and in the comment below there is no suitable solution, ask a question through our help form. It is fast, simple, convenient and does not require registration. You will find answers to your own and other questions in this section.

See also  How to share geolocation on iPhone

How to fix the problem with iPhone charging

So, if you have a situation that your iPhone does not charge, but shows that it is charged, then do the following:

  • Try to completely discharge your device, and then exercise it;
  • Perform your apparatus Hard Reset. Close the ON/OFF and Home buttons when the device is turned on, and hold until the screen is turned off and the Apple logo will not appear on it again (it may take 30 seconds). After rebooting, try to charge the smartphone again;
  • Try to use your cable with another iPhone. If charging does not happen the same, replace the cable;
  • If, when the cord connected to the port moves, it turns on, then it turns off. It is quite possible that the port does not contrast or just broken. Replace the port in the service center;
  • Disconnect your phone, take a wooden toothpick and gently collect it with the trash accumulated in the nest. Make the procedure as softly and carefully as possible so as not to damage the contacts. In no case do not use any current material (for example, a metal pin), you can close the contacts and harm your apparatus;
  • Try your charger with another iPhone. If charging does not happen the same. Replace (repaired) the charger;

? Power controller glitch

In the process of charging, a power controller plays an important role. But this microcircuit operates under the guidance of software, which can be trite to freeze. Must pay tribute to engineers, this happens extremely rarely. Still, try to reboot the smartphone is worth it.

Solution: Reload the device

Why is the iPhone not charged

I recently have problems with the iPhone 12. When connecting to nutrition, it was not always charged (when using an original cable and adapter). I tried another cable and charging. The same. And I decided to look inside the Lightning connector with a flashlight.

Even with the naked eye it was clear that the port was clogged with pile, dust and other dirt. This garbage accumulated over time, and I pressed it to the back of the port every time I connected the charging cable. In the end, a small “wall of dirt” began to interfere with the charging cable properly connected to the contacts inside the port. Hence the problems with charging.

An example of how much dirt can be in the charger iPhone

Therefore, before spending a lot of time and money on eliminating problems with iPhone charging, try cleaning the port of dirt and other foreign objects. But at the same time, be careful, because when cleaning you can easily make a mistake, because of which repairs may be needed in the future.

Why is this happening

Lightning cables cheaper than 500 are almost always laid as thin as possible. Saving is not taken from the air. As a result, such cables do not support the current strength (A. Ampers) at the level of original or high.Quality Lightning cables.

Original cable, as in the photo above, supports current strength up to 2.1 a (ampere). The current strength, in turn, is one of the parameters that determines how quickly your iPhone is charged.

Fake and low.Quality cables support current strength about 1 a. Can less, can 1.5 A. The run is large. Here it is, the difference in quality. So, you take a Chinese cable, you get charging 2 times longer.

wire, does, charge, iphone

Or not? Why no one notices the problem where the complaints are? If everything were so simple, they would have known about it for a long time. Just there is another factor in the case.

Why the iPhone is not charged

Below we will consider the main reasons that may affect the lack of charging a phone. If you are faced with such a problem, do not rush to carry a smartphone to the service center. Often the solution may be extremely simple.

See also  iOS how to transfer from android to iPhone

Charger

Apple smartphones are extremely moody to non.Original (or original, but damaged) charging devices. In this regard, if the iPhone does not respond to connecting charging, you should first blame the cable and the network adapter.

Actually, to solve the problem, try using another USB cable (of course, it should be original). As a rule, a USB network power adapter can be any, but it is desirable that the current strength is 1a.

Source of power

Change the power source. If this is a socket. Use any other (most importantly, working). If you connect to a computer, a smartphone can be connected to a USB port 2.0 or 3.0-the main thing, do not use connectors in the keyboard, USB hubs, etc. D.

If you use a docking station, try to charge the phone without it. Often accessories, unusualized Apple, can work with a smartphone incorrectly.

System failure

So, you are completely sure of the power source and connected accessories, but the iPhone still does not charge-then you should suspect a systemic failure.

If the smartphone still works, but the charge does not go, try to reload it. If the iPhone is no longer turned on, this step can be skipped.

Connector

Pay attention to the connector to which the charging is connected-over time, dust and dirt gets inside, due to which the iPhone cannot recognize the contacts of the charger.

Large garbage can be removed with a toothpick (most importantly, act extremely neatly). It is recommended to blow the accumulated dust with a spray with compressed air (you should not blow it with your mouth, since the Prolon falling into the connector can finally ruin the operation of the device).

Firmware failure

Again, this method is suitable only if the phone has not yet managed to discharge completely. Not so often, but still there is a failure in the operation of the installed firmware. You can eliminate such problems using the device restoration procedure.

A worn.Out battery

Modern lithium-ion batteries have a limited resource. A year later, you will notice how much the smartphone began to work less from one charge, and the further. The sadder.

Charger port not working? This tip could help!

If the problem is in the battery gradually failing, connect the charger to the phone and leave it on the charge for 30 minutes. It is possible that the charge indicator will not appear immediately, but only after a while. If the indicator is displayed (you can see it in the image above), as a rule, after about 5-10 minutes, the phone is automatically turned on and the operating system is loaded.

Problems with “iron”

Perhaps what every Apple user is most afraid of is the failure of certain components of the smartphone. Unfortunately, the breakdown of the internal components of the iPhone is quite common, and the phone may well be extremely operated, but on one day it simply ceases to respond to connecting the charger. However, more often a similar problem occurs due to the fall of a smartphone or a liquid hit, which slowly but surely “kills” the internal components.

In this case, if not one of the recommendations given above has brought a positive result, you should contact the service center for diagnostics. A connector, a train, an internal power controller or something more serious, for example, a motherboard could fail in the phone. In any case, without the proper IPhone repair skills, in no case do not try to make out the device yourself. Trust this task for specialists.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE