What bolts are needed to fasten the Samsung TV

What are the screws for fastening the Samsung TV

Ergonomicity is welcome in a modern interior, so the equipment, including large.Sized television panels, are attached to the brackets. They are compact, allow you to change the angle of inclination of the screen. When choosing this accessory, it is necessary to take into account the location of the holes on the TV panel and take care of the presence of the necessary fasteners.

The main criterion for choosing the mounting system is the distance between the holes on the rear panel of TV (this standard is known for VESA) and the type of bolts used to fix.

bolts, needed, fasten, samsung

Vesa standard

For fastening most television panels, standard fasteners and brackets are used. There are three types of systems like fixation:

  • Fixed. The panel is fixed motionless. It cannot be turned or tilted.
  • Inclined. Make it possible to tilt the screen down or direct at a slight angle up.
  • Sloping-horsemen-you can not only change the angle of the screen position, but also turn it to the sides.

At the place of fixation, table, floor, wall varieties are distinguished. A special type of bracket is ceiling systems. They allow you to fix the TV in the center of the room and rotate the screen 360 degrees.

Types of systems are universal and suitable for almost all models of equipment, since more than 150 manufacturers adhere to the given standards. And if you still purchase a model with a non-standard mount, you can buy an adapter.

Manufacturers associate VESA parameters with TV diagonal, although there is no direct connection between these characteristics. In particular, it is believed that for panels with a diagonal up to 22.9 ’’ we need a 75 × 75 or 100 × 100 mm bracket; for a diagonal from 23 ’’ to 30.9 ’’. 200 × 100 or 200 × 200 mm; For a TV with a diagonal of 31 to 90 ’’. 400 × 200, 600 × 400 or 800 × 400 mm.

The first number indicates the distance between the horizontal holes, expressed in millimeters, the second. Vertically. Therefore, to determine the Vesa standard, it is enough to make measurements with a roulette. If you measure distances for any reason, it is impossible, the necessary parameters are indicated in the instructions for TV, in the printed or electronic version. Keep in mind that in the description on the store’s website, this parameter is often indicated incorrectly.

What are the brackets

The bracket is selected depending on the universal mount of Vesa designated in the instructions for the TV: 50×50, 100×100, 600×400, etc. There are intermediate sizes. In addition, you need to take into account the diagonal of the TV and, therefore, its weight. How tightly will the TV fit against the wall, also depends on the bracket. And finally, the brackets allow us to diversify user scenarios. Some just keep the TV opposite the viewer, while others let them tilt the TV, others also turn horizontally.

Such a bracket is suitable when the TV needs to be hung directly opposite the audience vertically and horizontally parallel to the wall and no longer touch. The fastening does not imply any adjustments, but it costs inexpensively and holds supernavely.

One for All WM4411

A good name was chosen by the manufacturer, multi.Digit. And “one for all” and memorable “three musketeers”. “one for all”. It is very easy to mount: One for All has a mobile application where it is explained in detail what and how to do. Capable of holding the TV weighing in the centner!

VESA from 100×100 to 400×400. Only 8 sizes;

Vivanco Bfi 5040

The German company is famous for its quality at relatively low prices. The average Berlinets or Munich is not up to designer delights, in honor of reliability and accessibility.

Samsung WMN750M

Samsung branded bracket from the Slim Fit series and provides the most tight fit to the wall. Ideal for QLED TVs.

Distance from the wall. 28 or 53 mm, set during installation.

Vogel’s Wall3305

The Dutch do not lag behind the Germans as products. A reliable universal bracket with a very comfortable TV suspension. Even a huge panel can be hung alone. Unless, of course, you can raise it, the bracket withstands up to 80 kg.

Samsung Slim Fit 2021 WMN-A50E

The bracket is included in the delivery of The Frame interior TVs, but it can be bought for QLED TV and Crystal UHD. Allows you to fix the TV almost close to the wall with a minimum clearance.

The one with the Samsung curved back vesa mount

Attention! The bracket is intended only for models: QLED 2021, except Q80), as well as the series Crystal UHD (AU8000) and Neo QLED (QN900A). The screwdriver is included.

Distance from the wall for The Frame. 3 mm;

Distance from the wall for QLED TV and Crystal UHD. 7.5 mm.

What are the screws for fastening the Samsung TV. Mereremonta

Ergonomicity is welcome in a modern interior, so the equipment, including large.Sized television panels, are attached to the brackets. They are compact, allow you to change the angle of inclination of the screen. When choosing this accessory, it is necessary to take into account the location of the holes on the TV panel and take care of the presence of the necessary fasteners.

Features of mounting the bracket to the plane and TV

The main criterion for choosing the mounting system is the distance between the holes on the rear panel of TV (this standard is known for VESA) and the type of bolts used to fix.

See also  Apps are missing on your Samsung TV

Vesa standard

For fastening most television panels, standard fasteners and brackets are used. There are three types of systems like fixation:

  • Fixed. The panel is fixed motionless. It cannot be turned or tilted.
  • Inclined. Make it possible to tilt the screen down or direct at a slight angle up.
  • Sloping-horsemen-you can not only change the angle of the screen position, but also turn it to the sides.

At the place of fixation, table, floor, wall varieties are distinguished. A special type of bracket is ceiling systems. They allow you to fix the TV in the center of the room and rotate the screen 360 degrees.

Types of systems are universal and suitable for almost all models of equipment, since more than 150 manufacturers adhere to the given standards. And if you still purchase a model with a non-standard mount, you can buy an adapter.

bolts, needed, fasten, samsung

Manufacturers associate VESA parameters with TV diagonal, although there is no direct connection between these characteristics. In particular, it is believed that for panels with a diagonal up to 22.9 ’’ we need a 75 × 75 or 100 × 100 mm bracket; for a diagonal from 23 ’’ to 30.9 ’’. 200 × 100 or 200 × 200 mm; For a TV with a diagonal of 31 to 90 ’’. 400 × 200, 600 × 400 or 800 × 400 mm.

The first number indicates the distance between the horizontal holes, expressed in millimeters, the second. Vertically. Therefore, to determine the Vesa standard, it is enough to make measurements with a roulette. If you measure distances for any reason, it is impossible, the necessary parameters are indicated in the instructions for TV, in the printed or electronic version. Keep in mind that in the description on the store’s website, this parameter is often indicated incorrectly.

Recommendations for choosing a bracket and mounts

In addition to VESA standards, you must take into account:

  • The shape and size of the fastener. If the model of the fasteners does not fit the TV, it will block the connectors or ventilation holes;
  • The maximum weight that the bracket is able to withstand is better to purchase equipment with a margin of maximum weight;
  • The presence of a set of different fasteners in the kit. Then you do not have to buy the necessary metizes;
  • The presence of channels for laying cables.

Complete self.Tapping screws with dowels are usually not reliable and designed for perfect walls. If the walls are made of porous or fragile materials, you need to choose another fastener, for example anchor bolts.

Choosing bolts for attaching TVs to the bracket

Bolts for installing a TV on the bracket by the manufacturer in the kit are not always provided or not suitable, so you have to select and buy them yourself. What bolts are needed for attaching the plate to TV, indicated in the instructions. If the instruction is lost or there is no necessary information in it, you should contact the manufacturer’s website and clarify which metizes are needed. For example, on the first page of the instructions for the LG UH770V TV, it is indicated that to fix the equipment, 5 screws of 12 mm long and 4 screws M4 with a length of 12 mm will be required.

In any case, when calculating the bolts, the size of the diagonal, the weight of the television panel and VESA parameters are taken into account. In total, 7 types of bolted elements are distinguished to fix the TV to the suspended system. They are presented in the table.

Type Screen diagonal, mm Panel weight, kg Vesa, mm Diameter
Mis-B 100 × 200 Up to 2 50 × 20 M4
Mis-C 200 × 300 Up to 4.5 75 × 35 M4
Mis-D 75 300 × 580 Up to 8 75 × 50, 75 × 75 M4
Mis-D 100 300 × 580 Up to 14 100 × 100, 100 × 50 M4
Mis-E 580 × 780 Up to 23 200 × 100, 200 × 50 M4
Mis-F M6 780 × 2300 Up to 50 200 × 200 M6
Mis-F M8 780 × 2300 Up to 114 ≥200 × 200 M8

In addition, on the rear panel you can find the designations:

  • B. Installation is performed from below;
  • C. Installation is provided in the center;

Samsung TV bolts

Due to the features of the design, standard bolts for attaching Samsung TVs to the bracket are not suitable. First of all, we are talking about the series K, Ku and Mu. The rear panel of the TVs of these series is scooped, so you have to select non.Standard screws.

Most of the models of fixing systems are equipped with screws up to 30 mm long, while samsung installation requires 43-45 mm long bolts. This means that the fasteners that are included in the kit will need to be replaced with longer bolts, acquiring 4 additional metiz.

According to the following table, you can determine the diameter and length of the bolts for attaching to the Samsung 5 series of TVs, as well as the series K, KU, MU, Q7F.

What are the screws for fastening the Samsung TV. Mereremonta

Ergonomicity is welcome in a modern interior, so the equipment, including large.Sized television panels, are attached to the brackets. They are compact, allow you to change the angle of inclination of the screen. When choosing this accessory, it is necessary to take into account the location of the holes on the TV panel and take care of the presence of the necessary fasteners.

Features of mounting the bracket to the plane and TV

The main criterion for choosing the mounting system is the distance between the holes on the rear panel of TV (this standard is known for VESA) and the type of bolts used to fix.

bolts, needed, fasten, samsung

Vesa standard

For fastening most television panels, standard fasteners and brackets are used. There are three types of systems like fixation:

  • Fixed. The panel is fixed motionless. It cannot be turned or tilted.
  • Inclined. Make it possible to tilt the screen down or direct at a slight angle up.
  • Sloping-horsemen-you can not only change the angle of the screen position, but also turn it to the sides.

At the place of fixation, table, floor, wall varieties are distinguished. A special type of bracket is ceiling systems. They allow you to fix the TV in the center of the room and rotate the screen 360 degrees.

See also  How to connect a smartphone to the digital set-top box

Types of systems are universal and suitable for almost all models of equipment, since more than 150 manufacturers adhere to the given standards. And if you still purchase a model with a non-standard mount, you can buy an adapter.

Manufacturers associate VESA parameters with TV diagonal, although there is no direct connection between these characteristics. In particular, it is believed that for panels with a diagonal up to 22.9 ’’ we need a 75 × 75 or 100 × 100 mm bracket; for a diagonal from 23 ’’ to 30.9 ’’. 200 × 100 or 200 × 200 mm; For a TV with a diagonal of 31 to 90 ’’. 400 × 200, 600 × 400 or 800 × 400 mm.

The first number indicates the distance between the horizontal holes, expressed in millimeters, the second. Vertically. Therefore, to determine the Vesa standard, it is enough to make measurements with a roulette. If you measure distances for any reason, it is impossible, the necessary parameters are indicated in the instructions for TV, in the printed or electronic version. Keep in mind that in the description on the store’s website, this parameter is often indicated incorrectly.

Recommendations for choosing a bracket and mounts

In addition to VESA standards, you must take into account:

  • The shape and size of the fastener. If the model of the fasteners does not fit the TV, it will block the connectors or ventilation holes;
  • The maximum weight that the bracket is able to withstand is better to purchase equipment with a margin of maximum weight;
  • The presence of a set of different fasteners in the kit. Then you do not have to buy the necessary metizes;
  • The presence of channels for laying cables.

Complete self.Tapping screws with dowels are usually not reliable and designed for perfect walls. If the walls are made of porous or fragile materials, you need to choose another fastener, for example anchor bolts.

Choosing bolts for attaching TVs to the bracket

Bolts for installing a TV on the bracket by the manufacturer in the kit are not always provided or not suitable, so you have to select and buy them yourself. What bolts are needed for attaching the plate to TV, indicated in the instructions. If the instruction is lost or there is no necessary information in it, you should contact the manufacturer’s website and clarify which metizes are needed. For example, on the first page of the instructions for the LG UH770V TV, it is indicated that to fix the equipment, 5 screws of 12 mm long and 4 screws M4 with a length of 12 mm will be required.

In any case, when calculating the bolts, the size of the diagonal, the weight of the television panel and VESA parameters are taken into account. In total, 7 types of bolted elements are distinguished to fix the TV to the suspended system. They are presented in the table.

Type Screen diagonal, mm Panel weight, kg Vesa, mm Diameter
Mis-B 100 × 200 Up to 2 50 × 20 M4
Mis-C 200 × 300 Up to 4.5 75 × 35 M4
Mis-D 75 300 × 580 Up to 8 75 × 50, 75 × 75 M4
Mis-D 100 300 × 580 Up to 14 100 × 100, 100 × 50 M4
Mis-E 580 × 780 Up to 23 200 × 100, 200 × 50 M4
Mis-F M6 780 × 2300 Up to 50 200 × 200 M6
Mis-F M8 780 × 2300 Up to 114 ≥200 × 200 M8

In addition, on the rear panel you can find the designations:

  • B. Installation is performed from below;
  • C. Installation is provided in the center;

Samsung TV bolts

Due to the features of the design, standard bolts for attaching Samsung TVs to the bracket are not suitable. First of all, we are talking about the series K, Ku and Mu. The rear panel of the TVs of these series is scooped, so you have to select non.Standard screws.

Most of the models of fixing systems are equipped with screws up to 30 mm long, while samsung installation requires 43-45 mm long bolts. This means that the fasteners that are included in the kit will need to be replaced with longer bolts, acquiring 4 additional metiz.

According to the following table, you can determine the diameter and length of the bolts for attaching to the Samsung 5 series of TVs, as well as the series K, KU, MU, Q7F.

Vesa 03 standard.01.2013 12:19

Video Electronics Standards Association (VESA). Association of Video Electronics Standardization founded by video adapter manufacturers. One of the VESA standards created is the FDMI standard (Flat Display Mounting Interface)- regulates the requirements for the installation of housing plasma panels on wall-mounted fasteners. Compliance with FDMI requirements manufacturers of TVs, monitors and brackets guarantees the quality and safety of products.Vesa mounting standard is indicated by the manufacturer of TVs on the box or in the instructions. It can be indicated by both letters (Mis-D, Mis-E, Mis-F) and 400 x 400 numbers (the distance between the landing holes in length and height). Mis-D and Mis-E-mounting standard for LCD panels with a screen diagonal from 10 ″ to 32 ″, the distance between the landing holes 75 x 75, 100 x 100, 200 x 100 mm. Holes for bolts with a diameter of 4 mm.Mis-F-mounting standard for LCD panels with a screen diagonal from 32 ″ to 90 ″, the distance between the landing holes from 200 x 200 mm. Holes for bolts with a diameter of 6 and 8 mm.

If the manufacturer did not indicate the standard of fastening of the TV, then in this case the distance between the landing holes can be measured with a roulette (the distance between the holes along the length by the distance between the holes in height).

When choosing and buying a bracket for your TV, do not forget that the Vesa mount standard should have one.

There were many posts of such, but decided to repeat once again with a reflection of the nuances.

The cause of needlework is simple. To pay 1000 or more for a set of pieces of iron, painted black, and screws. Illogical. Just illogical.

We go to the store and buy a piece of iron for a penny. Due to the fact that the plane of the attachment of my TV is not flat (at the top is thinner), he took two brackets of the Z-shaped mounting corner Kuz 45x90x65x2 and four corners mounting corner of the equilateral Kur 60x60x40x2. Fasteners (bolts, dowels, screws) were at home. Total. Less than a hundred. (Links are not advertising, the first store on the Internet. If anyone is interfered, I’ll remove it)

See also  How to clean the memory of the LG Smart TV TV

Further, the installation sequence, the most interesting.

IMPORTANT! When fastening the corners to TV, check the depth of the holes in TV and correlate it with the length of your bolts. The bolts sticking out of the matrix, a terrible monoton (the photo can see. I put the washers under the upper bolts, t.To. There were no short at hand, there is 10mm maximum).

Optional. Bewitch corners in the desired color. I just pushed the visible area with black self.Adhesive.

We fasten two corners of Kur to TV into the lower holes of the posterior wall with a shelf down so that the shelves of the corners are in a fishing line for a trimmer (using a ruler) 2. We measure the height of the location of the regiment of the corners from the lower edge of the screen, determine the desired position of the screen in height, determine the place of fastening of the response corners on the wall3. We fix on the wall the retaliatory corners of the Kur with a shelf up so that the regiments of the corners are in the fishing line for the trimmer (using the ruler), and the distance between the corners on TV and the corners on the wall was the same.IMPORTANT! The main load is on these corners, they should be as well as possible (I have foam concrete, 2 dowels for each).4. We fasten (temporarily) two corners of Kuz to TV in the upper holes so that “the ladder is from the TV down”. Below in the photo it will be more understandable.5. With an assistant, neatly put the Kur corners on the corners of the Kur, lean the Kuz corners against the wall and mark their position on the wall.6. Remove TV, unscrew the corners of Kuz from it, and attach them to the wall in the marked position.7. With an assistant, neatly put the Kur corners on the corners of the KUR, lean TV against the corners of Kuz against the wall and wrap the upper tv8 attaching bolts on the back. Using a long screwdriver, insert safety screws into the matching holes of the corners of the Kur so as not to accidentally pull TV from them. Just insert enough, they will not go anywhere. There is a small adjustment of the slope due to the lower corners. There are many holes in them, you can move the bottom from the wall and insert the safety screw into the other hole.

Total: the TV is fixed reliably and inexpensively, just turn off the two upper bolts and remove the TV to remove.

Does the installation of the TV damage the wall?

It is easy to install a TV on the wall and is performed very quickly. The only problem associated with the mounting of the TV on the wall is that this can often damage it. Regardless of whether you are a tenant, you do not have a drill or you want to save the wall, you will need to learn how to mount without drilling.

But no, TV does not screw. You will find them with a mounting bracket.

How to fix the bracket for TV correctly?

Inspect its back panel and find four holes with a bracket thread. Measure the distance between the holes horizontally and vertically. The numbers obtained will be the standard VESA. Several examples of VESA: 50 × 50 mm, 75 × 75 mm, 100 × 100 mm, 100 × 200 mm, 100 × 200 mm and so on.

How to hang a TV on a gypsum wall?

The easiest way to hang a TV on a drywall wall using a butterfly dowel. To fix the bracket, you will need to determine the area of ​​the wall where the device will be placed and marked it with a marker. With the help of a drill, a hole identical to the diameter of the dowel is drilled.

Thus, in order to remove the TV from the wall bracket, it is necessary to partially turn the fixing screws (bolts) or squeeze the latches (most often located on the lower part of the strips), after which, raising the TV, remove it from the wall mount.

TV fastening to a stand, installation of wall mount. Samsung UE32H4500AK operating instructions

Make sure of all of the listed accessories and that the assembly of the stand is carried out in accordance with the available assembly instructions.

Installing TV on the wall using a set for wall installation (additionally)

If you decide to install the product on the wall, installation should be performed in strict accordance with the recommendations of the manufacturer. In case of improper installation, the device can slip or fall and cause serious injuries to the child or adult; In addition, serious damage to the device itself is possible.

SAMSUNG Smart TV Internet Speed UP

Set for wall installation (sold separately) allows you to install a TV on the wall.

Detailed information about the installation of wall mounting. In the instructions attached to him. We recommend installing a wall bracket under the guidance of a technical specialist. Do not install the installation on your own. Samsung Electronics is not responsible for damage to the product or injuries resulting from independent installation of wall mounting by the buyer.

Characteristics of a set for wall installation (VESA)

The set for wall installation is not included in the kit, but is sold separately. Install the wall mount on a continuous wall perpendicular to the floor. In case of installation of wall mounts on other types of partitions, apply for advice to the nearest dealer. When installed on the ceiling or inclined wall, the device may fall and cause injury.

Rains are longer than a standard size can lead to damage to the internal elements of the TV.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE