Iphone

Unlock iPhone to use accessories what to do

Table of Contents

Locked iPhone. what is it?

Locked iPhone (SIM-Lock) is a gadget that can work with SIM-cards of only one mobile operator. These smartphones are sold with mobile contracts (typically two years). By purchasing a SIM-Lock device, the user voluntarily deprives himself of the right to choose: if the conditions offered by the communication provider cease to suit the owner of the iPhone, he will not be able to go to competitors.

The SIM card of the “desired” operator is required to activate the locked device. This means that a gadget with a SIM-Lock cannot be used even as a multimedia device. for watching movies or listening to music.

How to jailbreak an iPhone?

There are two ways to unlock an iPhone, and each of them requires material costs on the part of the owner of the gadget.

Locked iPhone: what it means?

unlock, iphone, accessories

When purchasing a smartphone “hand-held”, buyers pay great attention to checking its appearance and basic functions, but they completely overlook one important point: they do not ask the seller whether the gadget is locked. A locked smartphone will cost the buyer less, but then you will have to pay a hundredfold for the immediate benefit. What is a locked iPhone and why buying such a device is not recommended?

How to find out if your iPhone is locked or not?

Rather than solving a problem, it is better to prevent it from occurring. In order not to get into a stupid situation, being “on hand” with an expensive device, but absolutely unsuitable in Russian realities, you should check the iPhone for the presence of a SIM-Lock before transferring money to the seller.

There are several ways to tell if the iPhone is locked:

Insert your SIM card. The device without SIM-Lock quickly recognizes the operator. If the gadget is locked, you will see “Activation Required” on the screen.

Through internet services. Thematic sites assure that there are no free services for checking the SIM-Lock iPhone by IMEI, thereby misleading readers. At the time of this writing, the site www.iphoneox.com exists and works fine, where they will not ask for a single ruble for such a check.

Before using the site, find out the IMEI of the device. this number can be viewed on the iPhone box or in the smartphone settings (the path “Settings”. “General”. “About this device”).

Then go to the site and enter IMEI in the special field (“Enter IMEI here”). Then check the box “I’m not a robot” and click “Check!”.

A table appears with detailed information about the smartphone. Find the item “SIM-Lock Status”. if next to it is “Unlocked”, then the gadget will be able to work with SIM-cards of all operators.

There are other similar portals (for example, the better-known service www.IMEI.info), but you have to pay for their use. The cost of the check will be about 3.

By model. It’s not about the modification (5S, 6, 6S), but about the model. You can find out the model in the section “About this device” in the settings of the device.

The two letters after the numbers in the model designation indicate the country for which the device is intended for the market. In our example, these are the letters “RU”. we understand that this iPhone is for Russia, which means that SIM-Lock cannot be on it.

If you buy “hand-held” and see that the model designation instead of “RU” is, say, “LL” (gadgets for Americans), you will need an additional check, because iPhones are sold in the USA with and without a SIM-lock Pay attention to the digital code in the designation: numbers 608, 610, 318, 319 indicate that the device is locked.

Hardware “unlock”

Hardware “unlock” involves the use of a special adapter called Turbo-SIM, which is placed in the SIM card tray along with the card itself. The microcircuit of such a device contains unique IMSI identifiers of several well-known cellular operators at once. this allows you to get rid of blocking.

When activation occurs, a special code comes to the iPhone with Turbo-SIM, which unlocks the radio module and modem of the device.

Hardware unlock has a number of disadvantages:

    The connection is getting worse. After each signal loss, the activation procedure has to be carried out again. The iMessage and Face Time functions are problematic to set up. Many Turbo-SIM (for example, firms R-SIM) do not allow you to perform any actions with the firmware of the gadget. in particular, update the OS.

Turbo-SIM from such manufacturers as Gevey, R-SIM, Heicard are widespread in Russia. Adapters from each of the firms have their own pros and cons. Let’s say Gevey’s Turbo-SIMs are very fragile, but they do allow users to update their iPhones. R-SIM, on the other hand, is durable, but for each upgrade, the owner of the gadget will have to buy a new adapter from this manufacturer. Heicard compares favorably with the rest in that they provide high quality communication.

.

How to fix the “Unlock iPhone to use accessories” error

If you have connected your iPhone, iPad or iPod touch to a USB accessory or even a computer, and the message “Unlock iPhone / iPad to use accessories” appears on the screen, you are not alone.

This message appears on the screen due to a new iOS security feature that aims to protect your device from unauthorized connections. The feature is useful, but the accessories won’t work until you unlock the device. Sometimes even charging is not supported.

The easiest way is to simply unlock your device with a password so that it recognizes the accessory and allows it to work. Then the notification will disappear. However, it is inconvenient to do this every time.

How to get rid of the notification

If you often connect accessories to your device, you will get tired of unlocking it every time so that they start working. Fortunately, the protection mechanism can be turned off so that the notification no longer appears on the screen. However, please note that you are putting yourself at risk.

  • Open the Settings app
  • Go to the “Face ID and passcode” section (or “Touch ID and passcode”).
  • Scroll down to USB Accessories and enable the option so the switch turns green.

Now you will not see the notification every time you connect an accessory to the device. This little security measure may have prevented your iPhone from charging on some computers and devices, but you should be fine now.

Why you need USB accessory protection?

Protection from USB accessories on iPhone and iPad appeared relatively recently and it is designed to protect devices from unauthorized access through accessories and various devices.

A great example of a device that the feature protects against is the GrayKey, which is used by the authorities to jailbreak locked iPhones and iPads. And if the “good guys” have such a device, then sooner or later the “bad guys” will also have it, who can use it to hack.

Whether or not to leave the option is up to you, however, by disabling the protection mechanism, you put yourself at risk. In any case, you can always change your mind in the settings.

This feature is enabled by default on all iPhones and iPads running iOS 12 and later, and was first introduced in iOS 11.4.1. Earlier versions of the system do not have this function.

Why Apple introduced this feature?

Many people wonder why this feature appeared in iOS. Well, the answer is simple. It’s all about the security of your data. Advances in the latest technology have created a wide range of security threats. Thanks to the restriction feature introduced by Apple, your iOS device will not be able to connect to any computer. To connect, you must unlock your device using your device passcode, Touch ID, Face ID, and more. While your device is locked, you will see the Unlock iPhone to use accessories message icon. So, in a nutshell, the message “Unlock iPhone to use accessories” appears due to the security feature.

What to do if you forgot your screen password?

You must know the device passcode to bypass iPhone unlocking in order to use the accessory message. So what if you’ve already forgotten your device’s screen passcode? After all, we all tend to forget our passwords for different reasons. So what can you do about it? In this section, we also offer a solution to this problem.

In this case, you will have to find a way to unlock your device without a password. The best way. use the unlock tool and bypass the lock screen. iMyFone LockWiper iPhone Unlock. the most successful tool you can rely on. This tool contains a very smart algorithm that can reset iOS device password with simple steps. If you are wondering How to Unlock iPhone with Broken Screen or How to Unlock iPhone without Passcode, try this professional tool.

Before we get into the steps, here is a list of the most notable features of iMyFone LockWiper.

  • It can reset the screen password of your iOS device by following a few steps.
  • You can use it to remove Apple ID from any iOS device without any problem.
  • It can even reset the restriction passcode on any iOS device, even if you don’t have the original.
  • LockWiper can bypass all types of screen locks applied on your iOS device (more ways to bypass Android lock screen without resetting for you). For example, it can unlock 4-digit passcode, Face ID, 6-digit passcode, and Touch ID.
  • iMyFone LockWiper is a comprehensive program with a very friendly user interface. You can easily use it even if you don’t know about it beforehand.

If you’ve forgotten your device password and want to unlock it, follow the instructions below. Before proceeding with unlocking your device, go to the official iMyFone website and download LockWiper.

Then install it to proceed to the steps below.

As a first step, you must connect the appropriate iPhone to your computer. Make sure you are using a compatible USB cable to establish the connection and avoid possible interruptions. Also, do not forget to check if the device is detected by the computer when it is connected.

You should now open iMyFone LockWiper on your computer to see the home screen. Select the option called “Screen unlock code,” which appears in the main interface of the app.

Once you’ve done that, don’t forget to click on the Run button. After that, iMyFone LockWiper will search for compatible firmware for the connected iOS device. When the corresponding firmware is found, you must click on “Download” to start the download process.

Once the download is complete, you should click on the option called “Start Extracting” as well, as a result, the program will start to extract the downloaded firmware.

As a final step, you must click on the Start Unblock option. “Then, when prompted, you must enter the code” 000000 “. This will confirm your action and the unlocking process will begin. That’s all. In a moment, the screen of your iPhone will be unlocked and you can use the accessories.

What does it mean to “unlock iPhone to use accessories”?

“Unlock iPhone to use accessories” error Appears due to a special security feature built into Apple devices. This feature was introduced to prevent unauthorized access. While it sounds very impressive, it can also be annoying.ying feature. When you need to quickly connect your device. iOS to your computer, this function can become a burden.

If we explain this in more detail, this error message appears due to USB restricted mode. This feature was added to iOS devices with their version of iOS 11. Since then, this USB limiting feature has appeared in all versions of iOS. In fact, this limitation prevents your iOS device from connecting to your computer when it’s locked. But devices connected with Lightning ports can be swapped without transferring any data. If you want to access the device through a computer or share any data (exchange data between iDevices,) it must be authorized. This means you need to unlock your device in order to connect your device to your computer and share data.

PS: let’s find out more about how to fix problems like iPad Pro won’t charge or this accessory may not be supported easily.

Post on the implications of fixing iPhone unlocking for using accessories

As mentioned in this article, you can fix the “Unlock iPhone to use accessories” message. However, this will expose your device to new risks.

Disabling the mechanism that triggers this message will result in a security risk. This means your device is allowed to connect to any device without warning. In short, you don’t need to unlock your device if you’ve disabled the mechanism.

If you disable this setting on your device, the iPhone won’t charge via the USB cable (click to fix iPhone stuck on the spinning wheel too).

Why do you see this message?

You see this message because of “USB Restricted Mode”, a security feature that Apple added in iOS 11.4.1 and enhanced in iOS 12. It prevents any USB-connected devices from connecting to the phone when it is locked. Devices connected to the Lightning port can still charge your iPhone or iPad. they simply cannot transfer any data until you unlock it.

This feature was added because hacking tools like GrayKey used a USB connection to crack the PIN protection on the iPhone and iPad. While GrayKey is used by police departments and other government agencies, perhaps this same method will allow criminals to bypass your PIN and gain access to your iPhone or iPad.

To prevent this exploit, Apple restricts USB devices’ access to data when your iPhone or iPad is unlocked. This setting is enabled by default, but you can disable it if it bothers you, but we do not recommend doing this.

When you connect a USB device to your iPhone or iPad while Restricted Mode is on, you will see a “USB Accessory” notification that says “Unlock iPhone / iPad to use accessories”.

How to Fix “Unlock iPhone to Use Accessories

Starting with iOS 12, you always need to unlock your iPhone or iPad in order to connect a USB accessory. This is due to the “USB Restricted Mode” which protects your iPhone or iPad from jailbreak.

How to disable USB Restricted Mode

We do not recommend disabling USB Restriction Mode. When connecting a USB accessory, simply unlock your phone or tablet. But if this feature really annoys you, you can turn it off. You may be using a lot of USB accessories and constantly unlocking your iPhone or iPad annoys you.

To turn off USB Restricted Mode and allow USB accessories to work even when your device is locked, open Settings> Touch ID & Passcode (or Face ID). Enter PIN to continue.

In the “Lock screen access” section, enable the “USB accessories” option. If enabled, devices can connect to your iPhone or iPad while it’s locked.

Again, we do not recommend enabling this feature. This way you can protect your personal data from hacking tools that are currently used in the real world.

“Warm” screen at night

To turn on a warm picture only in the evening, you can use the Night Shift function.

All current Apple gadgets starting with the iPhone 5s, iPad Air, iPad mini 2 and iPod touch (6th generation) support the Night Shift feature. This option allows you to make the color temperature of the display warmer at night.

It is enough to go to Settings. Screen and brightness. Night Shift, enable a useful feature and specify the time period for the option to be triggered. Below you can adjust the comfortable shade.

How to Fix Unlock iPhone to Use Accessories

Night Shift can be quickly turned on and off from the Control Center, you just need to hold your finger on the brightness adjustment slider and press the button of the same name to turn the mode on and off.

How to improve colors on the screen of any iPhone

Every iPhone or iPad user has long been able to adjust the picture on the screen of his device and make it more comfortable for perception. To do this, the system has a number of options that work in different ways and are useful in different cases.

Always warm display

This method is suitable for those for whom the picture on the screen seems too blue or “cold” and wants a warmer color regardless of the lighting and time of day.

You can do this on any iPhone or iPad, just go to Settings. General. Accessibility. Display adaptation. Light filters. Here you need to turn on the filters with the main switch, select the Tint mode and adjust the intensity and hue with the sliders below.

Additionally, you can go to the Settings. General. Accessibility. Keyboard shortcuts section and check the Light filters item here. So a triple press on the Home button will quickly turn on and off the use of the light filter.

“Warm” picture depending on lighting

The most advanced Apple trick for adapting the color temperature of the display is the True Tone option (Settings. Display and brightness. True Tone). Available only on iPhone X, iPhone 8/8 Plus, iPad Pro (except 12.9 ″ 1st generation).

Thanks to the presence of a special sensor, the device independently evaluates the illumination around and adjusts the color temperature of the screen to the ambient light. I entered a room with yellow lamps. the screen also turned yellow, went out into the sunlight. the screen turned white.

This allows the user to always see the most comfortable picture for perception.

True Tone can be turned on and off in the same way as Night Shift: open the Control Panel, hold the brightness slider and click on the corresponding button.

prompt: you need to log in before you can comment. There is no account yet. Please click here to register.

Use IMEI number to check if iPhone is locked

Each iPhone has its own IMEI number or a callable serial number containing all the information about the device, so you can use the IMEI number to find out if your iPhone is unlocked.

You can dial # to get IMEI code on iPhone in seconds.

Visit the IMEI Info registration page and create an account.

Enter the IMEI number in the field on the main IMEI information page.

Click “I’m not a robot Check SIMLOCK and warranty Check Apple Phone details”. You will see the message “Unlocked: false” or “Unlocked: true”. The first means your iPhone is tied to a carrier, and the second means your iPhone is unlocked.

Check if iPhone is unlocked by reset or restore

The last way to check if your iPhone is unlocked. is to reset your phone. You can do it in two ways.

Option 1. Restore iPhone to factory settings: select “Settings” “Reset” and click “Erase All Content”.

Option 2. Reset iPhone settings by performing restore in iTunes. Connect iPhone to computer and launch iTunes. Click on your developer icon and select the Summary tab, then click the Restore iPhone button. “.

If you see the familiar “Congratulations, iPhone is unlocked” message, your iPhone is unlocked. However, if you receive this message in iTunes or on your device: “The SIM card inserted in this iPhone does not seem to be supported”, it means that your iPhone is locked.

Hot solutions. ALSO ON UkeySoft SOFTWARE

Looking for a secret passcode to unlock any iPhone? Using passcode to unlock iPhone and iPad, you need iCloud remote unlock. This article will show you how to unlock iPhone with or without a computer.

IPhone screen is broken or unresponsive? How to enter passcode on iPhone with broken screen to access it? This article will teach you the useful method to enter password on broken iPhone screen, you can also learn how to unlock broken iPhone and iPad screen.

Can’t enter passcode on iPhone with broken screen? Try the solutions mentioned in the article to enter passcode on iPhone with broken screen and you can also use iPhone unlock tool to unlock broken iPhone screen without passcode.

How to remove passcode from disabled iPhone? How to unlock iPhone if you forgot your passcode? This article will show you how to remove password from locked iPhone / iPad using iTunes, iCloud or UkeySoft iPhone Unlocker.

check if iPhone is unlocked with different SIM

Another way to check if your iPhone is locked. is to use a SIM card of another operator.

Turn off your iPhone. Use a straightened paperclip to open the SIM tray, then remove your current SIM. Insert another SIM from a different carrier into the iPhone SIM holder. Push the paper tray back into place. Turn on the power again. Now try to call.

If your iPhone always displays “SIM Not Supported / Valid” or requires an Activation Code or SIM Unlock Code and you are unable to make calls, then your phone is locked. Otherwise, you can use any other mobile service provider.

Steps to Unlock iPhone Using UkeySoft Unlocker

Launch UkeySoft Unlocker on your computer Launch UkeySoft Unlocker on your computer. Connect your iPhone to your computer and just click “Screen unlock code” on the home screen.

Put iPhone into Recovery Mode Follow the on-screen instructions to boot iPhone into recovery mode. After that click Next to continue.

Download and check the firmware package Confirm your device model and click “Download” to continue.

As you can see, the program starts checking the downloaded firmware. Upon completion, the program will immediately download the firmware package.

Unlock iPhone without Password After you click the “Start Unlock” button after reading the warning, UkeySoft Unlocker will immediately execute the iPhone unlocking process without entering a password.

How to Fix Unlock iPhone to Use Accessories (iOS 12 and Later)

The unlocking process will be completed immediately and you will receive a “Uninstall complete!” Icon screen. Once the process is complete, your iPhone can be accessed without a password.

Prompt. See How to Completely Restart a Used iPhone After Unlocking

After successfully unlocking your locked / disabled / broken iPhone, it is very necessary to completely reset the iPhone in use. Why is it completely? When you search the web, you may already know that erasing iPhone data using Settings or iTunes and iCloud is not enough. You have to use a dedicated iPhone data eraser like the popular UkeySoft FoneEraser.

UkeySoft FoneEraser is the recommended iPhone eraser specially used to thoroughly clean iPhone personal data, all data including app data. Besides, it is also good for optimizing internal storage space on iOS device and one-click photo and video backup.

What is Carrier Locked iPhone?

There is more than one type of iPhone lock, but the most common is network operator lock. If you buy an iPhone at a lower price or from a specific carrier, you will find that it is locked. A locked iPhone has built-in restrictions on technologies that use GSM and CDMA devices, which means that such devices are limited to one carrier or only in one specific country. But when your iPhone is locked by the carrier, it can only accept the original SIM card. This means that when you insert a SIM card into an iPhone locked by the operator, the screen will display “SIM Not Supported” or “SIM Not Valid”.

A locked iPhone is usually not as valuable as an unlocked iPhone. Here are 4 effective ways to check if your iPhone is locked or unlocked, scroll down to view them one by one.

Change USB port

On a computer or laptop with Windows 10, it is quite common for the USB port to stop working for a while. This happens due to a glitch in the system or driver. The solution is quite simple. insert the phone into a different port.

Important! It is best to connect your phone to a USB 3.0 port, it is highlighted in blue instead of black.

Computer does not see iPhone via USB

When you connect your iPhone to your computer, your smartphone may display a message asking you to confirm that you trust the computer. If you do not press it, the connection will not occur.

If you do not unlock the phone, then it will also not appear in the list of connected ones. Therefore, when connecting it to a PC, always unlock it first.

Next, we will consider the most common reasons and their solution, why a computer or laptop does not see the iPhone.

iTunes does not see the iPhone

If iTunes does not see the iPhone, then first of all you need to try to update iTunes itself on the PC, and then look for the reason. Try to do this.

Reboot PC and Smartphone

If changing the port did not help. Then first try restarting the laptop / computer itself. And then turn off and turn back the smartphone.

If only charging is in progress

If only charging works when connected to a PC, then most likely the matter is in the drivers. Install iTunes from the official Apple website and try to connect again.

The problem may not be resolved, so we will update the drivers manually. Press the WIN R keys on the keyboard at the same time and enter the command. devmgmt.msc

In the device manager that opens, go to the “Portable Devices” section, find your iPhone there, right-click on it and select the driver update item.

Make an automatic search. If the problem is still not solved, then instead of updating, select the item to remove the device. Then disconnect the smartphone from the PC and reconnect.

Additionally, go to the “USB Controllers” section and see how the driver is displayed. Apple Mobile Device USB Driver. It should be without any icons.

If the icon is yellow, then restart the Apple Mobile Device service (more on that below). If the icon is gray, then right-click on it and enable.

Try connecting to another PC

If the problem disappears, then most likely the problem is with the computer. Install iTunes and try to connect again.

If the problem persists, then you will have to contact Support Apple if there is still a warranty or go to the service center so that they already find out the cause. Most likely, in this case, the smartphone’s connection socket is damaged and needs to be repaired.

Unlock iPhone to use accessories what to do

You may need to unlock your password-protected iPhone, iPad, or iPod touch to connect to your Mac, Windows, or USB accessory.

On iOS 11.4.1 and later, if you use a USB accessory with your iPhone, iPad, or iPod touch, or need to connect it to your Mac or Windows computer, you may need to unlock the device to recognize and use the accessory. The accessory will remain connected even if the device is subsequently locked.

If you do not unlock the password-protected iOS device first (or unlock and connect it to a USB accessory within the last hour), the iOS device will not communicate with the accessory or computer, and in some cases it may not charge. You may also receive a notification that the device needs to be unlocked to use accessories.

If after unlocking the device, the USB accessory is still not recognized, disconnect the device from the accessory, unlock it, and then reconnect the accessory.

IPhone, iPad, or iPod touch charges normally when connected to the USB power adapter.

Unlock iPhone to use Accessories not Charging Fix

Why Apple introduced an additional security measure?

The USB Accessory Assistant Security feature is a relatively new security system. The developers introduced it to protect the user’s personal data. The government (and the hackers, of course) has a special GrayKey device. It connects as a peripheral and allows you to jailbreak any iPhone and iPad even in a locked state.

Interfering with a user’s personal information is against Apple policy. The unauthorized peripheral lock function just protects against GrayKey and similar devices.

It is up to each user to choose whether to keep the security active or off. It should be remembered that if the function is disabled, the smartphone becomes vulnerable to hacks. In any case, you can always change the parameter by going to the settings.

Starting with iOS 12, you always need to unlock your iPhone or iPad in order to connect a USB accessory. This is due to the “USB Restricted Mode” which protects your iPhone or iPad from jailbreak.

Providing access to USB accessories

You can make your iOS device always have access to USB accessories if, for example, a USB accessory device is used to enter a password on a locked iPhone. Many assistive devices automatically enable a setting that allows access to USB devices the first time they are plugged in.

If you don’t connect to USB accessories regularly, you may need to manually enable this setting.

In the Settings menu, select Face ID & Passcode or Touch ID & Passcode and enable access to USB accessories under Lock Screen Access.

If USB accessory access is disabled (as in the image above), you may need to unlock your iOS device to connect to USB accessories.

System administrators can control access to USB accessories on monitored iOS devices using Apple Configurator or a mobile device management solution.

IPhone and iPad users started getting messages “Unlock iPhone / iPad to use accessories”. Basically, the notification appears for users who have just updated their gadget to iOS 12. The problem arises due to the introduction of the latest security system by Apple. The role of this message is to prevent the connection of extraneous external devices. The function allows you to protect your smartphone or tablet from hacking by connecting accessories, as it requires unlocking the device for authorization. Sometimes an error may appear even when the charger or computer is connected for the first time.

Today, all smartphones and tablets with iOS 12 and newer come with an active security feature. In models with iOS 11.4.1, the system is also there, but it must be activated manually.

If you follow the logical path, you can remove the error simply by entering the password on the device. It immediately recognizes the external device, authorizes it and allows it to work normally. It is very inconvenient to unlock the device every time when connecting peripherals. To avoid this, you should disable the function in the settings.

Why do you see this message?

You see this message because of “USB Restricted Mode”, a security feature that Apple added in iOS 11.4.1 and enhanced in iOS 12. It prevents any USB-connected devices from connecting to the phone when it is locked. Devices connected to the Lightning port can still charge your iPhone or iPad. they simply cannot transfer any data until you unlock it.

This feature was added because hacking tools like GrayKey used a USB connection to crack the PIN protection on the iPhone and iPad. While GrayKey is used by police departments and other government agencies, perhaps this same method will allow criminals to bypass your PIN and gain access to your iPhone or iPad.

To prevent this exploit, Apple restricts USB devices’ access to data when your iPhone or iPad is unlocked. This setting is enabled by default, but you can disable it if it bothers you, but we do not recommend doing this.

When you connect a USB device to your iPhone or iPad while Restricted Mode is on, you will see a “USB Accessory” notification that says “Unlock iPhone / iPad to use accessories”.

How to disable a message?

If you have to connect various accessories to the device quite often, you will quickly get tired of unlocking your smartphone. It is really safe and inconvenient at the same time. To the detriment of security, this system can be turned off, then the message will no longer appear on the screen.

  • Go to the “Settings” section.
  • Find the column “Face /
  • Activate the option (the tubler must be on).

Now, when any accessories are connected to a tablet or smartphone, the notification will not appear.

Important! Some users complain that after iOS update the device stops charging. The cause of the problem is precisely in the operation of the security system. After turning off the notification, the device should charge normally.

What to do if you get the “Unlock iPhone to use accessories” error?

IPhone and iPad users started getting messages “Unlock iPhone / iPad to use accessories”. Basically, the notification appears for users who have just updated their gadget to iOS 12. The problem arises due to the introduction of the latest security system by Apple. The role of this message is to prevent the connection of extraneous external devices. The function allows you to protect your smartphone or tablet from hacking by connecting accessories, as it requires unlocking the device for authorization. Sometimes an error may appear even when the charger or computer is connected for the first time.

Today, all smartphones and tablets with iOS 12 and newer come with an active security feature. In models with iOS 11.4.1, the system is also there, but it must be activated manually.

If you follow the logical path, you can remove the error simply by entering the password on the device. It immediately recognizes the external device, authorizes it and allows it to work normally. It is very inconvenient to unlock the device every time when connecting peripherals. To avoid this, you should disable the function in the settings.

How to disable a message?

If you have to connect various accessories to the device quite often, you will quickly get tired of unlocking your smartphone. It is really safe and inconvenient at the same time. To the detriment of security, this system can be turned off, then the message will no longer appear on the screen.

  • Go to the “Settings” section.
  • Find the “Face ID and Passcode” column or similar (“Touch ID”).
  • Scroll down the page to find the USB Accessories menu item.
  • Activate the option (the tubler must be on).

Now, when any accessories are connected to a tablet or smartphone, the notification will not appear.

Important! Some users complain that after iOS update the device stops charging. The cause of the problem is precisely in the operation of the security system. After turning off the notification, the device should charge normally.

Why Apple introduced an additional security measure?

The USB Accessory Assistant Security feature is a relatively new security system. The developers introduced it to protect the user’s personal data. The government (and the hackers, of course) has a special GrayKey device. It connects as a peripheral and allows you to jailbreak any iPhone and iPad even in a locked state.

Interfering with a user’s personal information is against Apple policy. The unauthorized peripheral lock function just protects against GrayKey and similar devices.

It is up to each user to choose whether to keep the security active or off. It should be remembered that if the function is disabled, the smartphone becomes vulnerable to hacks. In any case, you can always change the parameter by going to the settings.

Problems with accessories and connectors

Let’s move on to more advanced steps to help prevent excessive waste of energy from your battery:

  • Lightning wire testing is a very common problem, especially with Chinese wire. Try changing the cable you use to charge your iPhone, preferably the original one;
  • Checking the Lightning connector. if there is dirt or oxide inside the connector, gently clean it. just don’t use a metal object! It will be better to “crawl” inside the connector with a toothpick or folded paper;
  • Power adapter. a lot depends on its power. At a minimum, it should deliver 1 amp current. You can use a more powerful one, for example from an iPad. Apple allows.

Short description

Follow These Steps to Fix iPhone Charging Problem

  • Hard resetting your iPhone
  • Check your cable for damage
  • Try a different iPhone charger
  • Clean your iPhone charging port
  • Put your iPhone in DFU mode and restore
  • Repair your iPhone

What you need to know: If my iPhone won’t charge, do I need a new battery? Not!

I have seen a lot of misinformation on other sites on how to fix an iPhone issue at an additional cost. One article recommends replacing your iPhone battery if it won’t charge. As a former Apple tech, I can tell you this is the wrong advice. That’s why:

Most of the time, the problem is with your iPhone’s software. not the hardware! And I will prove it to you in step 1.

When you connect your iPhone, its software decides whether to charge the battery.

If your iPhone won’t charge, replacing the battery will most likely have zero results.!

If there is a hardware issue causing your iPhone battery to not charge, it is much more likely that the charging port is the cause.

Even Apple’s support article is not entirely accurate. They recommend updating your iPhone to the latest version of iOS, but how should you update your iPhone if it’s not charged?

First, we need to determine if your iPhone won’t charge due to a simple software issue.

Too common a genius in a bar meeting would go like this

A customer would bring his iPhone and say, “I’ve been trying to charge my iPhone all night, but my phone is completely dead. I plugged it into the wall, car and unplugged the cables, but the screen is still black. There’s definitely a charging problem! “

What to do if iPhone won’t turn on but charging?

Have you connected your iPhone (6, 7, 8, X) or iPad to a charger, but it does not see it and does not charge? This problem is faced by a large number of Apple users, and, as you might think, they can easily solve it.

Power Connector Problems

Equally common are cases where the iPhone 5 / 5s Lightning connector is at the root of the problem. Problems in this part can arise for at least three reasons:

  • Dust contamination. On Apple 5 Series devices, this connector has become closer to the standards used by most manufacturers. Its width has decreased, as a result of which any debris, dust, getting inside, lingers there, breaking the contact circuits. If this happens, then you need to take an ordinary toothpick and do a “general cleaning”.
  • “Global flood”. The Apple smartphone is not dust and moisture resistant, that is, contact of any part of the case with water can lead to its ingress into the elements of the electronic board. What to say when it hits the fully open slot. Unlike dust, which simply clogs the contacts, water oxidizes them, breaking the power circuit. Corrects this problem by replacing the port.
  • Mechanical defect. The power connector can also interfere with the battery charging process if, as a result of mechanical impact on the device, it is damaged or the cable itself has come off. This problem can be corrected only in a service center. Doing this yourself is not recommended for the reasons described above.

Checking accessories

Why does iPhone only charge when turned off? It is possible that the problem is related to a malfunction of the charger used. they often fail, stopping charging user gadgets. How to check the health of the charger? To do this, you need to try to find another charger and connect it to your iPhone. If charging has started, we try to turn on the smartphone. if the charger is working properly, charging should also go on.

If the charging process has not started, then the problem lies in the smartphone itself. there is a high probability of a breakdown in the charge controller. In this case, the iPhone should be taken to an authorized service center, where service specialists will take care of it.

Another way to test the health of your smartphone is to connect your charger to another iPhone. if it starts charging, then the problem is with the iPhone. When going to the nearest communication salon for a charger, you should take care of purchasing an original accessory. The thing is that if you use compatible chargers, you can lose the warranty on the iPhone. Sometimes their use becomes the cause of related breakdowns. The low quality of non-original accessories is compensated by their cost, but we recommend overpaying and purchasing an original charger.

As practice shows, the likelihood of iPhone breakdown as a result of using non-original accessories is very high. batteries and charge control circuits often fail.

The main factors

If your iPhone does not turn on after fully charging, you should leave it for 30 minutes. If everything is in order, the phone will turn on by itself. When the charger is working, the charging indicator on the display will light up. If the battery has sat down in the cold, then it must be preheated.

If the smartphone still does not turn on, you need to do a hard reset. Press the Home button and the power button at the same time (for 7th generation gadgets, this is turning on and adjusting the volume). Wait 20 seconds until the Apple logo appears. The operating system will boot in a couple of minutes. If the phone does not turn on after all these manipulations, you will have to take it to a service center.

How to get rid of the notification

If you often connect accessories to your device, you will get tired of unlocking it every time so that they start working. Fortunately, the protection mechanism can be turned off so that the notification no longer appears on the screen. However, please note that you are putting yourself at risk.

  • Open the Settings app
  • Go to the “Face ID and passcode” section (or “Touch ID and passcode”).
  • Scroll down to USB Accessories and enable the option so the switch turns green.

Now you will not see the notification every time you connect an accessory to the device. This little security measure may have prevented your iPhone from charging on some computers and devices, but you should be fine now.

What to do if iPhone is frozen on apple

After updating or rebooting, it may happen that the iPhone freezes on the apple and does not turn on. How to solve this problem and start the smartphone again, read our article.

The long-awaited iOS 13 update has recently been released. we talked about its main features in a separate article. Sometimes an upgrade carries not only cool features, but also a bunch of bugs. Sometimes installing an update leads to the fact that the smartphone freezes at the boot screen and does not want to turn on. Also, this problem may occur after restarting the device. Sometimes iPhone freezes when connected to PC or unsuccessful Jailbreak. what is it, read here.

Less commonly, the problem occurs due to the hardware. usually after an unsuccessful or self-repair. To prevent such a sad outcome, we advise you to use only the advice of Apple Authorized Service Centers.

Fortunately, in many cases, everything is easy to fix on your own without contacting a service. We will show you a few proven methods that will help revive the iPhone, which turns on and off before the apple.

Hard restart when iPhone won’t turn on and apple is on

Turn off and on again. this method helps in most cases, not only when iPhones break down, but also with PCs, routers and mobile gadgets. The process for starting Hard Reset depends on your iPhone model.

How to Force Restart iPhone with Home Button

Older iPhones are still equipped with a Home button. these are all devices from the first iPhone to the iPhone X. The most popular of them are: iPhone SE, iPhone 5 / 5s, iPhone 6 / 6s / 6 Plus / 6s Plus, iPhone 7/7 Plus, iPhone 8/8 Plus.

  • If you have a sixth iPhone or an older model, to restart, you need to hold down the Home button and the power key for about 10 seconds until the apple icon disappears from the screen. Also it shouldn’t blink.
  • If you have an iPhone 7 or older, press and hold the Volume Down and Power buttons at the same time until the white manufacturer logo disappears.

During the reboot, the phone will restore all disturbed processes and start up normally. Remember that after this you will need to enter the password from your Apple ID account.

Recovery via DFU mode

In case your iPhone does not turn on, the apple burns and goes out when you reboot, there is a special firmware update mode, it is also the DFU (Device Firmware Update) mode. When it is a forced rollback of the system, error diagnostics and emergency device update.

If the option with reboot and recovery did not help you, then DFU will become a kind of “plan B”. We still do not recommend starting with it. try Hard Reset and Recovery first, and if nothing works, proceed to recovery via DFU.

DFU mode works mostly on older iPhones. Here’s how to turn it on.

  • Connect iPhone to PC using iTunes.
  • Press the Power and Home buttons at the same time, as if rebooting, and hold them for ten seconds.
  • Release the Power key, but hold Home until iTunes displays a message that the smartphone has entered DFU mode.
  • Follow the on-screen instructions to reset iPhone settings.

Unlike the Recovery mode, the DFU works with the screen off, on which no icons are displayed. All data will be deleted from the iPhone during the firmware update; you will have to re-enter your Apple ID and adjust the iOS settings. To avoid losing important files when you reset your device, save them in advance to another medium or in the Apple cloud. We wrote more about backup in a separate article.

Using Recovery Mode if iPhone won’t turn on

In order not to lose information on the iPhone, you can try using the recovery mode, aka Recovery. This method will be most effective if the problem occurs after a failed system update. The smartphone will reinstall iOS without erasing your personal data.

  • Connect iPhone to Computer Using Lightning Wire.
  • If you have an iPhone 7 or older, press the Power and Volume Down buttons at the same time. If the older iPhone is the Home and Power key.
  • Wait for the notification that the smartphone is put into recovery mode, and follow the advice on the PC screen.
TURBION.NET 2021