Share Wi-Fi From Phone To Computer

A modern phone can perform a variety of functions, thereby replacing a large number of other devices. For example, a phone can replace a Wi-Fi access point. To do this, simply configure the distribution of Wi-Fi from the phone to other devices.

How to share Wi-Fi from an Android phone

In order to distribute Wi-Fi from your Android phone, you need to open the Android settings. This can be done by running the Settings application in the list of all installed applications. You can also open the settings using the top curtain or the desktop icon.

Share Wi-Fi From Phone To Computer

After opening the settings, go to the “Other networks” section. It should be noted that on your phone this section may have a slightly different name. If you cannot find this section, look through all the settings sections that are next to the Wi-Fi and Bluetooth settings.

Next, open the subsection called “Modem and Access Point”. Again, on your device, the name of this section may be slightly different. It can be called “Modem”, “Modem Mode”, “Connecting an Access Point” or simply “Access Point”.

After that, you must activate the “Portable Access Point” function. To do this, move the switch to the on position.

After activating the portable access point, you will see a pop-up window with a warning about turning off Wi-Fi. In this window, click on the “Yes” button.

This completes the setup, now your phone is distributing Wi-Fi. You just have to look at the password for access to the Wi-Fi network created by your phone. To do this, open the “Portable Access Point” section.

After that, a window opens with information about the access point. Here you can see and change the name of the access point and password.

How to distribute Wi-Fi from an iOS phone

If you have an iPhone, in order to set up Wi-Fi distribution you need to enter the settings and open the “Modem mode” section. If this section is missing, then this may mean that the mobile Internet is not turned on or not configured on your phone.

In this section you need to activate the modem mode function. To do this, move the switch to the on position.

In the same settings section, you can see the password that you need to use to connect to Wi-Fi.

This completes the IPhone setup. Now you can connect to the created Wi-Fi network.

How to distribute Wi-Fi from a phone to Windows Phone 8

If you have a phone based on the Windows Phone operating system, in order to distribute Wi-Fi you need to open the Settings application.

After that, you need to open the section “General Internet”.

Next you need to move the switch to the “On” position. After that, information about the name of the access point and password for accessing it will appear at the bottom of the screen.

This completes the setup of Windows Phone. Wi-Fi network is working and you can connect to it.

The ability to transfer data appeared on the iPhone back in 2008. This is a very useful feature, since you can distribute the Internet from an iPhone or an Apple tablet with a SIM card to computers, laptops, and even other phones.

This will require:

  1. Enable data transfer on iPhone.
  2. Connect devices to the created network in an appropriate way.

Watch also a video where you will learn how to distribute the Internet from iPhone or iPad:

  1. Put iPhone in modem mode
  2. If modem mode is unavailable
  3. Data rate
  4. Connect devices
  5. By WiFi
  6. By USB
  7. Via bluetooth
  8. If it doesn’t work

Put iPhone in modem mode

Let’s try using the example of iPhone 5s. First of all, you need to enable data transfer. You can do this in the settings. There you will see the item “Modem Mode”. You need to go into it and activate.

The first time you connect, a password will be automatically created. It must be entered on all devices that will connect to the iPhone via Wi-Fi. If desired, the password can be changed. There is no risk of forgetting it, since it is not hidden by the system.

Accept the offer to turn on Wi-Fi if you plan to distribute the Internet in this way. The listed actions may turn out to be enough for everything to work and the question of how to distribute the Internet from an iPhone to a laptop or PC is decided.

Video: Share Wi-Fi From Phone To Computer

If modem mode is unavailable

But it can also happen that the item “Modem mode” in the settings is inactive (grayed out) or even absent. In this case, select “Cellular communication” in the settings and enable data transfer (“Cellular data”).

It is also useful to go to the “Data Options” section.> “Cellular data network” and scroll down the page to make sure that the APN, Username and Password fields are filled in and correspond to the current mobile operator.

Typically, Internet connection settings are automatically provided by providers. But failures and unusual situations are possible. If the listed fields are not filled or are filled incorrectly, you need to obtain the current parameters from the operator.

Data rate

You can distribute the Internet both via Wi-Fi, and via USB or Bluetooth. Over, you can create multiple connections at the same time. For example, connect the iPad via Wi-Fi, and a desktop computer that does not have wireless modules. Via USB.

Choosing how to distribute the Internet from iPhone to computer, do not forget about the data transfer speed. Wi-Fi provides sufficient speed for comfortable surfing and for downloading files. USB data transfer speed varies by version. 2.0, which models 4, 4s, 5 and 6 work with, is much slower than Wi-Fi. But USB 3.0 and 4.0 demonstrate solid speed. Bluetooth of any of the existing versions is inferior to them by 2 orders of magnitude.

Please note that the speed is determined by the slowest of the devices in a pair. Therefore, if you use iPhone 4s with USB 2.0 and the most modern laptop with USB 4.0, the data transfer rate in this bundle will still not exceed 480 Mbps.

Connect devices

By WiFi

We will figure out how to distribute Wi-Fi from the iPhone to devices running various operating systems. To get started, turn on Wi-Fi on your PC or laptop.

In Windows 7 and 10, this can be done through the icon, which is located on the taskbar. On laptops, turning wireless devices on and off is also possible using a special switch or function keys. Which ones depends on the model, so see the instructions for the laptop. You can also control Wi-Fi from the Control Panel.

On Mac OS, the situation is similar. You can connect Wi-Fi through the icon on the top panel, or in the system settings, in the “Network” section.

It’s easy to figure out how to distribute the Internet from iPhone to iPad, because they both work under iOS. After you turn on data transfer on your phone, you just need to turn on Wi-Fi in your tablet’s settings.

After activating the modem mode, a network is created, which is visible in the list of Wi-Fi connections. The network name contains the word “iPhone.” Just select this network and after asking for the password, enter it.

The parameters of the created connection do not need to be changed, everything should work fine with the default settings. If everything worked out, the inscription: “Connected devices 1” will appear on the top line of the smartphone.


We found for you a video instruction on how to connect the Internet via USB:

If you do not know how to distribute the Internet from an iPhone to a PC that does not have wireless modules, use USB. Let’s consider in more detail how to distribute the Internet from an iPhone via USB.

Connect the wire and give the computer time to discover the USB device. The easiest thing to do with this is Mac OS, for obvious reasons. For Windows 7 and 10, we recommend installing iTunes. In this case, there are no problems with detecting the iPhone.

A new item appears in the network connections section, which is activated in a standard way. If the equipment does not appear in the list, try restarting the computer.

Via bluetooth

Bluetooth data transfer loses to other options in speed. But broadcasting the Internet in this way is almost as simple as distributing Wi-Fi to your computer from an iPhone.

To make a connection, you must:

  1. Enable data transfer mode on iPhone.
  2. Activate bluetooth on both devices.
  3. Create a pair.
  4. Assign a Bluetooth device as an access point.

To create a pair on a PC or laptop running Windows, you need to go to the “Control Panel”.> “Devices”.> Bluetooth In the list, select “iPhone” and click on the “Link” button that appears next to it.

On iPhone, you need to enable pairing, and on Windows, confirm that the code matches.

Now the connection is established, but the Internet does not work yet. You will need to select “iPhone” in the list of devices again and click “Connect via”.> “Access point”.

If it doesn’t work

To begin with, it is worth checking whether there is Internet on the iPhone itself. If not, make a request for balance and available Internet traffic. Check if the login, password, APN parameters for the modem mode are specified correctly.

  • If the iPhone does not give out Wi-Fi, check if Wi-Fi is connected on both devices and if a new connection appears in the list on the computer. If there is a connection, you can go to its settings. Sometimes the problem of lack of Internet can be solved by setting the DNS values ​​ This is true for all connection options.
  • If it is not possible to connect via bluetooth, it is recommended to check the availability and relevance of the Bluetooth module drivers installed on the PC.
  • The problem that the iPhone does not appear in the list of USB devices is most often solved by installing iTunes and restarting the computer.

And can a mobile operator prohibit the use of the phone as an access point? Technically, tracking the inclusion of this mode is impossible. But on the provider’s side, traffic non-specific for mobile devices is clearly visible, including an update for operating systems or downloads from torrent trackers.

However, such control was relevant in those happy, but short-lived times, when almost every operator had unlimited tariffs that users quickly learned to use for all devices. Now you pay the amount of gigabytes per month defined by the tariff. And how you use them. On one device or on several. Is your own business.

And, of course, in the event of a malfunction, one should not exclude the hardware problems of the distributing or receiving device. But before you bring the iPhone or laptop to the service, you need to make sure once again that all the connection instructions have been followed.

See also how to distribute the Internet from Android phones: