Samsung TV does not play a video from a flash drive

The TV does not see a flash drive why? How to connect an external hard drive or a USB flash drive to TV and watch a video

Good day.

Any modern TV today is equipped with at least one USB port for connecting multimedia devices (for example, flash drives, disks, etc.D.). However, the TV is far from always able to see the drive, and read files on it.

In general, after the next “dancing” around TV from LG, I decided to sketch typical reasons (“sores”). Because of which some flash drives (external discs) cannot be opened with a regular TV (much, of course, depends on the specific model of the device and its firmware, and yet. ).

Note: By the way, some users confuse the presence of a Smart TV with a video viewing function from a USB drive. This is in no way connected, there are many devices without Smart TV, but with the ability to open a USB drive.

The material of the article is relevant for TV different brands: LG, Samsung, Philips, Dexp, Sony, etc.

Watching movies and photos on a TV with USB flash drive

First you need to download the movie and throw it on the flash drive. Or copy some photos or music to the drive. You can create folders and put files in them.

Among the sources there should be “USB”, or “media” (“media”).

If the Smart TV TV, then the menu can be launched by the application that is responsible for watching media files on external drives. On TVs Sony, Philips, Dexp, Kivi (which on Android TV) is the Media application (Media). But you can install some third-party conductor or player and use it.

Playing can be controlled (pause, rewinding, the next/previous video/track) using buttons on the screen, or on the remote control. On my Philips, for example, if you close the film and start again, he will offer to reproduce it from the place where the viewing was stopped.

Why doesn’t the TV see a flash drive or an external hard drive?

  • Flash drive, or external HDD is too large. On the LG website, for example, I found information where it is indicated that flash drives with a volume of more than 32 GB and hard drive more than 2 TB TV may not see. For other manufacturers/models, this information may not be relevant.
  • For an external hard USB disk, there may not be enough power (especially if it needs a voltage of more than 5 V and consumption of more than 500 mA). In this case, you need to use an external power source for the disk. But I did not come across this. I connected hard drives to LG, Samsung, Philips TVs. Everything always worked.
  • The drive must be formatted in the FAT32, or NTFS file system. It is better to choose NTFS, since a film that weighs more than 4 GB per drive in FAT32 you will not copy.
  • Perhaps the TV simply cannot work with a certain drive. This happens too. Just try to connect another drive.
  • Do not use USB units.
  • Connect the USB flash drive to another USB port on the TV (if there are several in your TV).
See also  How to connect a digital console to a Supra TV

Information on this problem in a separate article: the TV does not see a flash drive (USB flash drive).

Why is Samsung not reading a flash drive: reasons

If the Samsung TV does not play a video from the flash drive, then you need to look for the cause of the malfunction. To do this, try different connection options and test the operation of a removable medium.

USB port on TV is blocked

The most common cause of the malfunction is the breakdown of the USB separation. In this case, after turning on the TV, a message about an attached flash drive will not appear on the screen.

The port of the TV is blocked due to the following reasons:

It will be difficult to fix the situation on your own, t.To. To do this, you need to have special knowledge and have experience of such work. It is best to contact the Samsung service center, whose experts will quickly eliminate the breakdown.

TV does not read this amount of memory

Some old “Samsung” TV models have restrictions on the volume of memory of the connected devices. In most cases, the limit is 32 or 64 GB. You can find an exact number in the instructions for the operation included in the kit for TV.

It is not recommended to install additional programs or reflash the device, t.To. It is impossible to expand the specified limits.

The file format is not read

A common cause of the problem is the lack of the ability to reproduce certain file formats. This is due to the fact that TV is able to “see” drives with the FAT 32 file system, and the flash drive is most often formatted according to NTFS.

Such a problem can easily be eliminated with your own hands. To do this, you need to perform the following actions:

  • Insert a flash drive into a USB port of a laptop or computer.
  • Open “My computer”. A list of all connected devices will appear on the screen.
  • Choose a item with the name of the formatted drive.
  • Click with the right button (PKM) and in the menu that appears they choose “format”.
  • In the parameter window opened, NTFS is necessarily changed to FAT 32.
  • Press the “Start” button.
  • After a few minutes, the flash drive will be formatted under the file system.

Problems with a USB flash drive

Often there is a situation when files from the flash drive easily open on the Samsung TV, and after a while they cease to be affordable. This problem occurs due to partial damage or wear of a removable medium. To determine the degree of damage, it is necessary to diagnose.

  • The flash drive is connected to PC.
  • Open “my computer” and find the name of the connected device.
  • With the help of PKM, they call the context menu.
  • It finds the point “Properties”.
  • In the window that appears, they go into the “Service” tab.
  • 3 sections will appear, in the first of which they click on the “check” button ”.
  • The next page select the parameters of the operation. It is recommended to put marks opposite the “Automatic Update” and “Search and Restoration” command.
  • Click on the “Launch” button.
  • Wait a few minutes until Windows completes the diagnosis of flash drives.
  • After that, a detailed report on all the problems found will appear on the screen. If the failures are insignificant, then you can try to eliminate them. If there are a large number of problems, you will have to buy a new flash drive.
See also  Samsung does not see the flash drive in the bios

Problems with disks and flash drives connected to the Samsung TV are considered a common occurrence. To understand what to do in case of their occurrence, it is necessary to study all the recommendations of manufacturers and the advice of specialists. If it turns out to accurately determine the cause of the malfunction and find the optimal way of repair, then you can quickly restore the connection and enjoy viewing the recorded files.

How to fix usb not working on smart/led tv. But works perfectly fine on a pc

Flash drive is not visible due to a large amount of memory

In the firmware of the TV, the maximum amount of memory of the carrier with which is possible work is laid. Old TVs may often not see the outer flash drive of more than 8 or 16 GB. Modern television reception models are designed for drives with 32 and even 64 GB of memory.

The release of the TV can be the output. Only a specialist can do this. Yes, and bother just for the sake of connecting flash memory is inappropriate. Therefore, it is better to throw a file (video, movie, music) to a smaller flash drive.

If there is no less voluminous flash drive, you can create a section with the optimal memory size on the current drive. Actions are performed on a computer through the command line. The process is described in detail in the video.

You can find out the restrictions on the volume of memory for the connected external devices from the documentation to the TV. If there is no information in the characteristics, contact support on the official website of the manufacturer. Popular brands provide support in Russian.

What to do if the TV does not see a flash drive?

Tvs. Carious devices. In addition, there are new models, and there are old ones that, in terms of supporting different formats, file systems and drives of different volumes, are very different. For example, it is quite possible that some models of TVs do not see flash drives more than 8 GB, or 16 GB. This is normal, since each TV model has restrictions on the maximum volume of the connected drive.

Important: Make sure you are doing everything right. I already showed how to connect a USB flash drive to the TV and watch movies, videos, photos, listen to music. There I wrote about the problem when the TV sees a flash drive, but does not read files (does not play video).

If you connect everything correctly, go on the TV on the menu (or the application on Smart TV TVs). But there is no flash drive there, the TV does not see it, then try the first thing to perform the following, simple actions:

  • Check the flash drive on another device. If the computer sees a flash drive, good. If not, then the reason is most likely in the flash drive, and not on the TV.
  • If you connect a USB flash drive through an extension cord, or a USB bias (hub). Then try to connect it directly to the USB port of the TV. Through an extension cord or even more so a USB hub may not work.
  • Usually there are several USB ports on the TV. Try connecting the drive to another port.
  • Pay attention to the inscription near the USB port. If there is something like “Service” or “Remote Control”, then such an input is used for diagnosis and repair. Only in service centers. Do not connect a flash drive in such a port (or only after unlocking the port).
  • If there is such an opportunity. Take another flash drive. At least for checking, she will see her TV or not.
  • Disconnect the TV outlet for 5 minutes.
  • If you have a USB 3 standard flash drive.0, and on the TV Portes USB 2.0, then everything should work, they are compatible. The reason is most likely not this.
  • There is information that some TVs do not see flash drives with GPT marking. You need to convert it to MBR.
See also  What to do if the computer does not see USB

How to Fix Unsupported File Format and Missing Files on Smart TVs (2020)

Did not help? Let’s look at other solutions.

Pavtube Video Converter Ultimate

Pavtube Video Converter Ultimate. Solution to the problem for converting 4K videos of any format to a file adapted for playing 4K on TV. At the same time, neither the quality of the starting file, nor its frame rate, nor its resolution are lost. The advantage of Pavtube Video Converter is its ease of use, in installation and update.

You can not only configure, for example, video codec 4k on h h.265, and audio codec on AC3, mp3. You can compress 4K video. You can also increase high.Clay video up to 4K video for 4K TV. The software fully uses NVIDIA CUDA and AMD Technologies and has a high conversion rate (up to 30 times faster) than another 4K video converter. In any case, the developers of Pavtube Video Converter assure.

You can make a 4K video supported by 4K TV in 3 steps: download the video, set the format for watching on the TV, click on the button and wait for the result.

Why and what to do if the video begins to play, but there is no sound

In any video there are at least two paths. Sound and directly path with a picture. Each path has a separate format. If the picture from the video has launched, but there is no sound, then your TV does not support the codec (format) of the sound track that is in this video, but works with the codec of the path that is responsible for the image.

What to do in this case? Look in the characteristics of TV devices, what sound codecs it supports. If there is no sound codec of a problematic video on this list, that is, there is no support, you need either download video with a new codec, or try to adjust the available file. This can be done through third.Party utilities, for example, in the Factory of Formats, Total Video Converter or Virtual Dube.

In the Factory of Formats, you can change the format for different types of files, including video

Some videos have two sound paths (in different formats), then you just need to switch to the second path if the first does not work. The course of action in this case will depend on the manufacturer and model of the TV. You need to familiarize yourself with the instructions that are included with TV. Or you can find the operating manual on the Internet. On the manufacturer’s website.

samsung, does, play, video

First check the performance of the flash drive itself, the USB slot and TV. If the flash drive is read on PC, try changing the file system of the flash drive. If it does not help, check the flash drive for broken segments using the standard Windows tool. If TV reproduces only the image with the video, but there is no sound, download the same video from the Internet, only with the sound path format that will support TV.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE