Samsung Smart view does not show the pin

What to do if Samsung’s Smart view doesn’t see your TV?

TVs with Smart features are becoming more and more popular. Such devices provide a lot of useful features, which include controlling technology via smartphone and using files from PC.

Many users are attracted to Samsung TVs. If you have a Smart TV you can connect your phone and watch files without installing complex programs.

If the equipment belongs to another company, it is also used, but it requires the Samsung Smart View app. Find out how to connect your Smartview to your Samsung TV from our review.

Samsung TV PIN-code. how to unlock

Situations that require a pin code are usually two. the desire to lock the TV and situations when it is already locked, but the user has forgotten the password he entered. There are also cases when a person changes the factory code, setting his own, and forgets about it.

If the device is locked, you can learn about it when instead of TV programs you see a blue screen with a key or a field for entering the password. Also, if you want to turn on, for example, child lock, you can’t do without knowing the pin code. Regardless of the circumstances, in this case there is no unsolvable problem.

To unlock your Samsung Smart TV, you need to have a remote control (RC). Without it you can’t solve the problem. The user needs to know a special combination of numbers. Sometimes, in extreme cases, you have to go back to the factory settings, reset the channels and configure them again. In the most complicated cases, the wizard flashes the software on the Samsung TV again.

In the majority of cases the owners can cope on their own, without the help of specialists. It is not very hard, if you have the user manual from the TV.

How the issue with the code is resolved

The easiest way to find out the standard PIN-code of your Samsung TV is to get the instruction from your model or to look it up on the Internet. It contains a special section dedicated to this issue. There you can also find out what to do, if the password has been changed and then lost. Without the manual or access to the network, you can only rely on your memory, which, unfortunately, in such cases often fails, and the blocked device blocks access to the Smart Hub.

As a standard for Samsung Smart TV the manufacturer sets the simple pin. 0000 (more rarely 1111). If the owner has not changed it or has not used it at all before, there is no problem. If you have changed it, you can reset the settings to reset the old password.

PIN code for Samsung TVs can be reset with the remote control in a simple way:

  • You need to turn on your TV;
  • Then you should press in a clear sequence Mute Button Update Button. Update Button Update Button.

In order to have the same access to the hub and to continue to use the TV you can restore the factory code (for TVs built before 2012 it is the same 0000 by default). You must find the EXIT button on the remote control, press it for at least ten seconds.

For newer models, from 2012, the procedure for resetting the user password is done by pressing the remote control buttons in sequence: Mute, 8, 2, 4, Power (power button). Press the buttons quickly.

See also  Connecting a VCR to an LG TV

When it’s not always about the password

Before you unlock your Samsung TV to watch TV programs with Smart technology, you need to find out the exact cause of the inconvenience by asking yourself: “Do I really know why the problem appeared?”.

Basic nuances:

  • You can’t restore anything without the Smart TV remote control. If it’s faulty or lost, you should look into getting a new remote control;
  • If every time you turn off your Smart TV, the channel settings get thrown off, then it’s the firmware and needs to be updated;
  • You can check the functionality of the remote with an ordinary camera on your phone by pressing any button from the remote and pointing it at the phone camera, if there is a flash in the photo, then there is nothing wrong with the remote, but if the TV does not respond to it, you should call a master.

Fix your bugs

As we’ll see later, most modern Smart TVs are no longer compatible with this software. But, if in your case it still works for you, and this is when it started giving you trouble, you should do the following steps.

Set it up well

First, your Galaxy phone has to be connected to the same network as your Smart TV. So we have to do the following steps to make sure we are using the same Wi-Fi connection. First, swipe down from the top edge of the phone screen to open the quick settings panel. Then press and hold the Wi-Fi icon to open your device’s Wi-Fi settings. Here we will check that we are connected to the correct network, in addition we can change it if necessary.

Then we will need to accept the necessary resolution on our TV. So if your TV needs permission to duplicate our cell phone screen, we first have to select Allow on your TV. So click the Smart View icon in the quick settings panel and select your TV from the list. If you still can’t see your cell phone panel on the TV screen, try the following methods.

Adjust the screen format

Communication with Smart View and your TV may be fine, but it can not view the panel of your phone, because you incorrectly set the format of your smartphone screen or, simply, for some time it has not been properly configured. Consequently, we will have to re-adjust it.

To do this, we will need to click on the blue Smart View icon and then tap on the aspect ratio of the phone. Here you can select the settings you want. Although we recommend selecting full screen mode on the connected device. Although if you prefer to switch to a different format on the connected device every time Smart View starts mirroring your mobile screen, you can activate “Remember Settings” as a useful option for you. Of course, keep in mind that this may lead to restarting some applications.

Reset your mobile

If we have tried the previous methods and even in this case, we can not get the phone panel to transfer to the Smart TV, the only solution to this problem is to reset the Samsung cell phone to factory settings. Although, before doing so, try to reboot both devices.

In case the phone screen is still not connected or not displayed, we should proceed with this method. However, we must remember that resetting the mobile device to factory settings is irreversible, so we will delete all data from the terminal. So we recommend if you don’t want to lose any of your information, make a backup before trying to reset your phone.

Then we have to access the settings and enter the general administration section. After that we will have to press “Reset to factory defaults” and go to the “Reset” option. Finally, we should select Delete all.

See also  How to connect a Samsung watch to your phone

Possible problems

Sometimes users can encounter some difficulties that can cause Smart View to stop or limit its functionality. Let’s take a look at the most common ones, as well as methods of fixing them.

The program cannot find the TV

There are several reasons for this:

  • the TV software does not match. You should check for updates, and if they are available, perform their installation;
  • The main condition is not met. the cell phone (or computer) is not connected to the TV to a shared network. Connection must be from the same router.

After fixing each of these problems you need to reboot all devices:

And after that, try to do the installation from the beginning.

The connection is broken

This can happen because the distance between the two devices is too big.

You should not go far away from the TV, it will inevitably lose synchronization, or there may be long delays.

Other difficulties

In addition to the basic, the following small problems are also possible:

  • The selected file is not playing. Perhaps anti-virus on your gadget blocks the work, you need to disable it.
  • TV does not respond to commands. Most likely there is an error in the bluetooth module or router. Check if the connection is correct (disconnect and reconnect the device).
  • The application closes (crashes) on its own. This can happen due to mismatch between OS and Smart View software. You will have to update the operating system or buy a more modern phone.
  • Poor picture quality. Most likely the original file resolution is low, and on a larger screen it becomes more noticeable. If available, make the resolution as high as possible in the settings.
  • Ads pop up. Some craftsmen install applications with ad blocker, but it is not recommended to do this, because there is always a possibility to run into malicious files.

In this article, we discussed the characteristics of a program from Samsung called Smart View:

Thus, Tenorshare ReiBoot for Android is the best solution to get rid of Samsung Smart View does not work problem. This professional repair program fixes various Android related problems, such as Samsung tablets that don’t go beyond the launch screen.

However, you should note that if the smart screen mirroring feature does not work because of some hardware issues, you will not be able to fix your smartphone at home. In such a situation, you need professional care. So you should take your smartphone to your local support center. So, download Tenorshare ReiBoot for Android if the screen mirroring problem occurs due to some system related issues.

Can’t find Samsung Smart TV

Sometimes the problem happens exactly on the application and operating system side of the phone. So first of all uninstall the app completely. Then go to “System” and update your Android OS to the latest version. After that, re-download the app from Google Play or App Store.

On older “boxes” that were released since 2011, you need to update the operating system. To do this in the menu you need to do synchronization via TELNET. Sometimes the update takes place in a separate settings menu. I can’t tell you exactly where it is, I’ll have to look for it.

Reboot the router, for this purpose come to it and press the special button. If you are afraid to click on something wrong, just unplug it. You can try to wait 2 minutes and then turn on. If this does not help and the app still does not work. reconnect the phone to the network. Also check that the TV is connected to the router.

Ways to connect to a Samsung Smart TV

Android or iOS smartphones can be connected to TVs from Samsung. To do this, the latter must have its own operating system and access to the Internet. Pairing of devices is performed for picture and video demonstration, TV control, file transfer. In this article, let’s take a closer look at how to connect your phone to your Samsung Smart TV.

See also  Setting up satellite TV on your TV

There are four ways to connect your mobile device to your Samsung TV: through the app, the built-in Samsung smartphone function, Miracast and HDMI cable. The choice of method depends on the goals the user has, the phone OS and the TV model. So, for games, it is better to use a wired connection, as this will avoid delays in the transfer of images.

Before we proceed to describe the step-by-step guide, we should note that the TV must be connected to the Internet. This is done via a wired or Wi-Fi connection. The smartphone must also be connected to the internet and be in the same home network as the TV.

samsung, smart, view, does

M, Q, K series televisions already have a built-in Wi-Fi module. If you want to make a wireless connection in other models you will need to buy a special adapter connected to the USB port.

Possible malfunctions

Sometimes it can happen that Samsung Smart View application refuses to work.

Below is a list of common problems and their solutions:

samsung, smart, view, does
  • Not finding the TV. Software update is required. This is a problem with televisions and other mobile devices that don’t belong to Smart Hub service, but support Smart Hub. Supported Devices 2011-14.в., Not a Smart device yet, but supporting Smart Hub service. You can get the update package by synchronizing with the TENET service.
  • The connection is not established or there is a long delay in data transfer. It is necessary to reduce the distance between the TV and smartphone/PC. Wireless transmission is characterized by the loss of some data at a great distance.
  • Can’t play content from a computer or tablet. You need to turn off antivirus on the connected device, t.к. it blocks access to it.
  • TV does not respond to commands. You need to check the functionality of the built-in Bluetooth module or the correct connection of the external router.
  • The application “crashes. In this case, the phone is not designed to work with Samsung Smart View, you need to update Android.

Important! Each device has a pixel resolution limit. Consequently, if the broadcast is transmitted to a device with a low resolution. the image quality will deteriorate. If not, it will not improve, t.к. The screen is unable to magnify the original pixel resolution of the incoming file.

Hi all! Today we’re going to talk about a problem when the Smart View app can’t see your Samsung TV. The most important thing is not to panic. it can happen to anyone. It was today that I encountered this problem when connecting my smartphone to the TV. And now I will tell you how to deal with it. But first, let’s make a proper connection.

Megogo

Often included in the Smart TV Philips apps by default, but often found on other televisions as well. The service also has a free mode, but the amount of content in it is limited. Much more movie productions become available after you pay for a subscription (costs inexpensive).

The app ranks because of its practicality, wide selection of movies, access to online broadcasts, and cross-platform. The main advantages of the application are the ability to select different voices and enable or disable subtitles. The app is especially convenient to use from your personal account, which has access to hundreds of TV channels.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE