Samsung Phone Won’T Turn On How To Turn On

Soft reset Samsung Galaxy S10 / 9/8

Soft resetting your Samsung Galaxy S10 / 9 / 8. Is one of the easiest ways to get rid of Samsung that cannot be turned on. You can press and hold the power button for a few seconds to restart your phone. Of course, press and hold the power, home and volume up buttons together to check if Samsung boots.

Samsung Phone Won'T Turn On How To Turn On

Of course, if you have questions about Samsung not turning on, you can always ask Samsung Service Center for help. Take your phone to a service center, call tech support, and even send your phone in for repair or replacement to get professional help.

Force restart Samsung Galaxy phones

There is a chance that the problem will be resolved after restarting the phone. This is the easiest and safest method as you will not lose data from your phone, but this method can only fix a few problems. Follow the steps below to restart your Samsung Galaxy phone. So hold down the volume down key and the power button at the same time for 10-20 seconds.

Charge your Samsung Galaxy S10 / 9/8

This is the very first thing to charge your Samsung Galaxy S10 / 9/8 to make sure the device is running low. If you have not used your Samsung phone for a long period of time, you will need to charge a certain amount of time, otherwise the Samsung Galaxy phone may not turn on.

Fix Samsung Phone Not Turning On With All-in-One Software

And more Android system recovery tools have been released lately, and we tested one called iMyFone Fixppo for Android internally. Works well to be honest and expect much more.

It can fix all Android system problems.

It’s easy to understand and use, so you don’t need to know much about technology.

All Samsung phones and tablets are well supported.

He works with the highest repair rate in the field.

It is reliable software that is trusted by many well-known websites.

After installing Fixppo for Android on your computer, you can go to the home page and click the Start button. At this stage, you will be given instructions and you must enter all the requested details. Once you have done that, click on “Download Firmware.” You must ensure that you have downloaded the correct patch, otherwise you may cause problems with your device. If you are 100% sure that everything is correct, click “Start”.

For a successful fix, the device must be in download mode and connected to your PC. If download mode is enabled, the fix will start automatically; otherwise you need to follow the actions on the screen.

Once the repair is complete, the device will automatically reboot.

Boot your Samsung phone into recovery mode

Another way to download Samsung phone. Recovery mode. After Restarting Your Samsung Galaxy Phone in Recovery Mode, You Can Fix Samsung Won’t Turn On Error and Get Your Samsung Phone Back to Working State.

Press and hold the Power, Home and Volume Up keys together. When you receive the SAMSUNG logo, you can release the power button.

After a few seconds, you will notice the Samsung logo on the screen, release the Home and Volume Up keys and wait 30-60 seconds.

You can now use the volume down button to highlight any option and select it with the power key.

Samsung phone won’t turn on. Ten

Samsung Galaxy S10 / 9/8 won’t turn on. This is one of the most frequently reported messages. When your Samsung phone suddenly goes black and won’t turn on If your Samsung phone is stuck at the logo or won’t charge at all, it’s difficult for you to pinpoint the problem.

What should you do? Article 10 provides easy ways to troubleshoot Samsung phone problems. Even if you’ve worked with a Samsung phone that won’t turn on, you can check the root causes and solutions for Samsung boot problems.

Solved: How to Disable Screen Wake from Text Message

My problem with my new Samsung Galaxy S9 is that with the default Messages app that comes with the phone, how do I turn off the SCREEN AWAKE feature that is automatically set on the phone for texting. I have no problem with text preview and notification icon placed on Always On display, but I don’t like / want the screen to wake up automatically for those short 2-3 seconds when I receive a new text message. This ONLY happens from the new text message. In any other app, when I receive a notification, the screen stays off and just vibrates or plays the sound I have set, and also displays a notification icon that I can see when I turn on the screen myself. Application “Messages”. The ONLY app that wakes your phone from sleep when you receive an incoming text message, and it’s annoying. And none of the suggested steps for Always On Display or settings in the Messages app disable this feature. Is it possible to turn it off. PLEASE, HELP

Influence of external factors

Another procedure must be followed if the breakdown of the phone is preceded by external factors. These include water ingress, falls, overheating in the sun, and so on. It should be noted that the actions in each of the situations are different. For example, if you dropped your phone in water, then take your time to turn it on. Remove the battery first, if possible. Then place the device completely in a glass or jar of rice. You need to wait a while for all the moisture to come out, and only then turn on the phone. In some cases, this method helps to restore performance.

If we are talking about falls and serious injuries, after which the smartphone stopped turning on, then you must immediately contact the service center.

Hardware breakdowns

Hardware malfunctions are much more difficult than system problems. You can diagnose some breakdowns and then repair them.

Press the power button and listen to the speaker of the phone. Your device may have a defective display, but a startup sound is playing. In this case, screen diagnostics are required.

If you are using an SD card, then try removing it and starting up the device again. The problem may be related to unsupported media or virus files on the memory card.

Now we invite you to get acquainted with the video, which details the methods of self-repairing phones.

Battery and charging test

So, you pressed the power button or unlock the device, but there was no reaction. No need to panic. Check the basic points first:

  • Connect the charger to your phone. Perhaps you forgot to charge the battery in time. Wait a while. With active charging, the corresponding icon should appear on the phone.
  • If this does not happen, try to test the charger’s functionality with another phone. Many modern devices have SIMilar connectors, so you can ask your loved ones for a smartphone.
  • For a phone with a removable battery, open the back cover and check if the battery is installed correctly. This item is irrelevant for most modern smartphones.

Only after a complete check of the battery and charging can you proceed to the next stage. However, you will not be able to make sure that the phone connector is working, so you will have to contact the specialists if our instructions do not help.

How to turn on your phone if it won’t turn on

You can face phone breakage at the most inconvenient moment. Therefore, be sure to familiarize yourself with the diagnostic methods and solutions to the problem presented in our article. Today we will figure out how to turn on the phone if it does not turn on.

Factory reset

The next method is relevant for smartphones. It involves rolling back the settings and phone software to the factory state. If the cause of the breakdown is not related to the hardware part of the device, then this method will help restore operability.

Reset can be done using a combination of buttons. You need to hold down the Home and Volume Down buttons for a few seconds. After the Recovery menu appears on the screen, you must select the Wipe data / factory reset option. Then the smartphone will start the recovery procedure.

You can navigate the Recovery menu using the volume keys. The appearance of the menu and the names of the items may differ depending on the firmware version. Also, the methods for launching Recovery differ. Check the key combination in the instructions or on the manufacturer’s website.

Remember, factory reset erases all personal data and apps. In order not to lose important information, we recommend making backup copies of profiles, accounts and saving files to cloud services.

This concludes the article about turning on broken phones. Follow all the steps from the instructions, and if they do not help, contact the specialists for diagnostics. We do not recommend disassembling mobile devices without proper skills and tools.

How to forcibly turn off a Samsung smartphone

When you need to turn off your Android Samsung Galaxy phone in a normal situation, just press and hold the screen off button, and then select the desired item in the menu. However, the situation is complicated when you need to turn off a smartphone with an inoperative screen sensor, with a broken screen or without the ability to unlock it, a frozen phone, especially considering that batteries in modern Samsung are non-removable. Some in this case wait for a complete discharge, but this is not at all useful for the battery (see What to do if Android is running low). However, there is a way to shutdown in the described scenarios.

This short tutorial details how to force shutdown your Samsung Galaxy smartphone using only the hardware buttons on it. The method works for all modern models of smartphones of this brand, including for a locked device with a completely non-working screen or in cases where the phone is frozen. Unfortunately, the reason for writing this article was my own brand new broken Note 9 (but there are some pluses: thanks to Samsung Dex, full access to memory, data in it and applications remained).

Turn off Samsung Galaxy with buttons

As promised, the instruction will be very short, a forced shutdown consists of three SIMple steps:

  • Connect your Samsung Galaxy to the charger.
  • Press and hold the power button and volume down button. If at this moment the creation of a screenshot occurs, do not pay attention, continue to hold the buttons.
  • Release the buttons after 8-10 seconds, the smartphone will be turned off.

By itself, the specified combination causes (after holding) a “SIMulation of battery disconnection” (SIMulated Battery Disconnect. In the official formulation of the manufacturer).

And a couple of notes that might be helpful:

  • For some older models, a SIMple long hold on the power button works.
  • Samsung‘s official website says that you need to hold down these buttons for 10-20 seconds. However, in my experience, it works around the 7-8th.

I hope the material was useful for some of the readers.

Check charger and cable

Perhaps your Samsung smartphone is dead and won’t turn on. You plugged in the charger but nothing happens. First of all, try to take charge from another gadget, and if the phone reacted to it and began to receive a charge, then the problem is in it. The next step is to change the USB cable to determine what exactly stopped working. If, after replacing the wire, your charger began to charge the smartphone battery, then the reason is its malfunction.

Samsung Galaxy won’t turn on. We restore the smartphone

Sometimes Samsung Galaxy smartphones or tablets may stop turning on for no reason. The Android operating system crashes, but more often than not, users have problems because of the pre-installed root rights. Now you will learn how to revive the device, if, of course, this is not a hardware failure.

There are several ways and we will start with the most obvious and SIMple ones.

Samsung tech support tip

Following the advice of Samsung technical support, we suggest trying the following very effective way to restore your mobile phone to work:

  • Press and hold the “Volume Down” and “Power” buttons
  • Hold them for 7-12 seconds
  • If after that your device started working, then a very common failure occurred in its operation.

If the problem persists, then move on to the next solution.

Flashing with ODIN

If after resetting the parameters, the device does not work, then you should try to reflash it. We are looking here for the firmware for your smartphone model, download the ODIN program from this link and install the drivers for Windows, and then proceed to the instructions.

    Run the ODIN application by unzipping it before

  • In the off state of the device, we hold down the “Volume down” and “Power” buttons, and then press the volume button up
  • We connect the phone to the computer, press the key with three dots opposite “AP” and select the firmware file, which is in the.Md5 format
  • After a minute or more, the “Start” button should become active. Click on it when it becomes possible and then the firmware process will go.
  • In a few minutes, the gadget should automatically reboot. If you get stuck on loading animation then try doing a factory reset again.
  • Factory reset

    All data will be lost, including unsynchronized contacts, messages, call history, application data, and files in the phone memory. The contents of the memory card will remain intact.

    • Enter the recovery by holding the “Volume up” and “Power on” buttons in the off state of the device.
    • Select “Wipe data / factory reset” from the list and press the power button
  • After the process is complete, select “Reboot system now” and wait for the device to start.
  • Clearing the cache

    Formatting the phone memory partition that stores the entire cache.

    • Enter the recovery by holding the “Volume up” and “Power on” buttons on the switched off device until an inscription with the name of your phone model appears on the screen
    • After starting the recovery, using the volume buttons, select “Wipe cache partition” and then press the power button to complete the process
  • When finished, select “Reboot system now” by pressing the power button.
  • The attempt was unsuccessful? After restarting the device did not work properly? Moving on to more complex ways.

    We carry Samsung Galaxy to the service center

    If none of the above solutions to the problem suits you and the phone still does not turn on, then you need to go with it to the Samsung service center. They will probably find out the reason for the loss of working capacity.

    Defective charging. Of course, the second thing to check is the health of the charger. Everything is SIMple here. We take a working charger and try to charge our smartphone. If the process has started, then we buy a new one and rejoice. Although it sounds trite, it helps one in five.

    This method is applicable if your phone does not really turn on, but does not turn on completely. For example, it hangs on your Android logo and nothing else happens. This happens due to a malfunction in the smartphone software. Then a hard reset will help us or, in translation, a hard reset. For each model of the device, it is made differently. In order to find out how, enter the name of your phone and the words hard reset, for example LG G3 hard reset, in Google or Yandex and follow the instructions. In the future, I hope to create a separate section on the blog on this topic.

    Unfortunately, not all smartphones support hard reset, it depends on the recovery installed in the device. If you are interested to know in more detail what it is, look on the Internet.

    For example, there is no such function by default, in many sony phones, but the manufacturer has provided the ability to restore the software using a special utility Sony pc companion.

    Android smartphone does not turn on. Guaranteed problem solution.

    Hello. Today I would like to analyze all the most common reasons why an Android smartphone may not turn on. I will not touch upon those situations when disassembling the phone and interfering with the electronic filling is required, since this is the work of completely different specialists.

    If your smartphone or tablet suddenly stops turning on, it is not necessary to immediately run to a service center or workshop and return it for repair. Most likely, there is a chance that you can do it yourself and save some money (programs for home bookkeeping on Android will also help you in saving, look for them on the blog). Below we will look at the main measures that you can take if your Android smartphone or tablet does not turn on. So let’s get started.

    Android phone won’t turn on. 5 ways to solve the problem.

    If the phone does not turn on, then it may SIMply be frozen. To revive your device, we will apply a long-known, but still relevant method. Take out the battery and insert it again.

    Unfortunately, this trick does not work on many modern phones with a non-removable battery. In this case, to reboot, you need to find the reset button and press it with a paper clip, for example. It can be anywhere, but it is usually located near the SIM card slot or on the back of a smartphone or tablet. There is sometimes an inscription reset or off near the reset button. The photo below shows an example of the location of such a button in a Sony Xperia M5 smartphone.

    From my own experience, I will say that in 80% of all cases, if they come to me with a problem that the phone does not turn on, the whole thing is in a discharged battery. And I perfectly understand when they tell me that they have been charging the smartphone all day, but it still does not turn on. Some devices have one unpleasant feature. If the battery is very badly discharged, it will not charge, even if you keep it on charge all day.

    In this case, a frog-type charger will help us, which allows you to charge almost any battery directly by removing it from the phone. It is enough to recharge the battery in this way for 15 minutes. Then insert it back and put the phone on charge as usual, everything should be OK.

    If getting a frog is problematic for you, then you can use any old mobile phone charger. Cut off the old plug and protect the wires.

    Make sure that the charger is not plugged into an outlet at this time.

    We fix the bare wires on the battery with tape for a few minutes.

    Not often, but even so it happens that the smartphone does not turn on due to the fact that the contacts under the battery do not reach. To fix this, you need to bend the contacts with tweezers or a small screwdriver to improve the connection with the battery. The main thing here is without fanaticism, otherwise you will only make it even worse.

    If none of the methods helped and your phone still does not turn on, then the problem most likely lies in the hardware itself and only the service center can help you.

    I would be grateful if you share in the comments your ways how you can revive your smartphone.

    Best regards, Ivan Derbenev.

    How to force restart an Android smartphone

    Press the power button and volume down key at the same time for 10-15 seconds. If successful, the device will restart automatically or display a menu on the screen in which you will need to select the restart command.

    To reboot some Android smartphones, just hold down the power button for a few seconds. Sometimes there are gadgets that are restarted using other keys. If the smartphone does not respond to the listed actions, type in the search engine the query “how to force restart” and add the name of your model. Then follow the instructions found.

    Force restart the device

    Your phone may be on, but just frozen. In this case, the screen may be dark and unresponsive to any actions. So first try restarting your device using the hardware keys.

    Reset the machine to factory settings

    If after trying to turn on the smartphone does not respond at all or the screen lights up, but the device does not boot, try restoring the factory settings using the hardware buttons.

    Remember: during a system reset, you may lose personal data that has not been synchronized with the server. Do not do this if you are afraid to erase important information.

    Take out the battery and put it back

    If your phone has a removable battery, remove the cover and slide the battery out of the device. Wait at least 30 seconds and replace the battery. Then try turning on the phone in the usual way. Using the power button.

    Put your phone on charge

    Connect your phone to a wall outlet using the original charger. If the charging indicator does not appear on the display within an hour and you cannot turn on the device, check the integrity and cleanliness of the connector, as well as the condition of the power cable and adapter. Try different sockets, if possible, replace cable and / or adapter.

    How to reset iPhone to original settings

    First of all, connect your phone to your computer using the original cable. If you have a Mac with macOS Catalina, launch Finder. If you’re using an older version of macOS or Windows, start iTunes. If it is not installed, download it from the Apple website.

    Then force restart your iPhone (see step 1). When you see the Apple logo, continue to hold the buttons until the recovery mode appears on the smartphone screen.

    Immediately after that, a window with further instructions should appear on the computer monitor. Click “Update” and follow the system prompts.

    Itunes will download the correct software for your phone. If this process takes more than 15 minutes, the iPhone may exit recovery mode. In this case, hold down the forced restart buttons again and hold them until the device returns to this mode.

    If the update works, the phone can turn on without resetting the system. If not, then in the iTunes window, click “Restore” to restore the factory settings.

    What to do if your phone won’t turn on

    Do not rush to take your smartphone for repair. Perhaps these SIMple steps will help reanimate the device.

    If problems arise due to water getting into the device, do not connect it to the mains and stop pressing the buttons. Dry your phone as soon as possible and only then follow the advice in this article. If you are sure that the inside of the smartphone is dry, feel free to continue.

    How to Force Restart iPhone

    On iPhone 8, iPhone 8 Plus, or later, hold down and immediately release the Volume Up key and then the Volume Down key. After that, press and hold the side button until the Apple logo is displayed.

    On iPhone 7 or iPhone 7 Plus, hold down the Side key along with the Volume Down button for 10 seconds or more until you see the Apple logo.

    On iPhone SE, iPhone 6s, iPhone 6s Plus, or older, hold down the Home key with the Side button for 10 seconds or more until the Apple logo appears.

    How to restore the original settings on an Android smartphone

    Make sure your smartphone is turned off and try the following reset combinations:

    • Volume up key power button;
    • Volume down key power button;
    • Volume down key volume up key power button;
    • Volume down key Power button Home key;
    • Volume up key Power button Home key.

    You need to hold down the keys at the same time and hold them for about 10-15 seconds. After that, a special menu will appear on the screen, in which, using the volume control buttons, select the Recovery item, and then the Wipe data / factory reset command or with a SIMilar name.

    After these steps, the smartphone should return to its original settings within a few minutes. If none of the key combinations work or you do not find the required commands in the service menu, look for the reset instructions for your device model.

    If none of the above recommendations help turn on the device, try returning it under warranty or take it to a service center.