Samsung Phone Won’T Start

If the phone does not turn on, then it may simply be frozen. To revive your device, we will apply a long-known, but still relevant method, take out the battery and insert it again.

Unfortunately, this trick does not work on many modern phones with a non-removable battery. In this case, to reboot, you need to find the reset button and press it with a paper clip, for example. It can be anywhere, but it is usually located near the SIM card slot or on the back of a smartphone or tablet. There is sometimes an inscription reset or off near the reset button. Below is an example of the location of such a button in a Sony Xperia M5 smartphone.

The Android smartphone does not turn on. Guaranteed problem solution.

Hello. Today I would like to analyze all the most common reasons why an Android smartphone may not turn on. I will not touch upon those situations when disassembling the phone and interfering with the electronic filling is required, since this is the work of completely different specialists.

If your smartphone or tablet suddenly stops turning on, it is not necessary to immediately run to a service center or workshop and return it for repair. Most likely, there is a chance that you can do it yourself and save some amount (programs for home accounting on Android will also help you in saving, look for them on the blog). Below we will look at the main measures that can be taken if your Android smartphone or tablet does not turn on. And so let’s get started.

Method number 1

From my own experience, I will say that in 80% of all cases, if they come to me with a problem that the phone does not turn on, the whole thing turns out to be in a discharged battery. And I perfectly understand when they tell me that they have been charging the smartphone all day, but it still does not turn on. Some devices have one unpleasant feature: if the battery is very discharged, then it will not charge, even if you keep it on charge all day.

In this case, a frog-type charger will help us, which allows you to charge almost any battery directly by removing it from the phone. It is enough to recharge the battery in this way for 15 minutes. Then insert it back and put the phone on charge as usual, everything should be OK.

If getting a frog is problematic for you, then you can use any old mobile phone charger. Cut off the old plug and protect the wires.

Make sure that the charger is not plugged into an outlet at this time.

We fix the bare wires on the battery with tape for a few minutes.

Method number 4

This method is applicable if your phone does not really turn on, but does not turn on completely. For example, it hangs on your Android logo and nothing else happens. This happens due to a malfunction in the smartphone software. Then a hard reset will help us or, in translation, a hard reset. For each model of the device, it is made in different ways. In order to find out how, enter the name of your phone and the words hard reset, for example LG G3 hard reset, in Google or Yandex and follow the instructions. In the future, I hope to create a separate section on the blog on this topic.

Unfortunately, not all smartphones support hard reset, it depends on the recovery installed in the device. If you are interested to know in more detail what it is, look on the Internet.

For example, there is no such function by default, in many sony phones, but the manufacturer has provided the ability to restore the software using a special utility Sony pc companion.

The Android phone does not turn on. 5 ways to solve the problem.

Method number 2

Defective charging. Of course, the second thing to check is the health of the charger. Here we all just take a working charger and try to charge our smartphone. If the process has started, then we buy a new one and rejoice. Although it sounds trite, it helps one in five.

Why it is not possible to charge a Samsung phone

Unfortunately, today, people who own Samsung phones suffer from the fact that the phone does not charge or is charging, but with great interference. This problem has recently become quite common.

This article is for those people who also encountered this problem. If this problem is detected, it is necessary to immediately take the necessary measures, because this problem cannot be left to chance. Further in the article, we will take a closer look at why this happens to the phone (does not charge) and what to do in such cases.

Cause

In the event that you try to charge the phone from a computer device or using the standard method through an outlet and the Samsung phone does not work, then the reason for this may be a malfunction of the cables. First of all, you need to carefully review all the cords on the phone. If you checked, and they turned out to be intact and working, then the reason is not in them. It is necessary to continue to look for the reason.

The reason may be:

  • It is quite probable that the connector itself is not fixed in the phone. If this is true, then it will need to be replaced;
  • In the event that the same connector is slightly torn out of the so-called printed circuit board, the phone will also not charge;
  • The food controller may be broken. In the event that this is indeed the case, then it is necessary to replace it;
  • If the phone takes a long time to charge, it indicates a damaged power circuit. This detail is quite essential in the entire system, therefore, it is necessary to carry out diagnostics before its direct repair;
  • A small enough percentage may account for other problems.

It is also very likely that the problem is that the phone is quickly discharging, but very slowly or does not charge at all. Then the problem is in the battery itself.

Such problems are quite common and people do not know what to do in these cases. Therefore, we provide a solution to problems.

Elimination of breakage

First of all, it should be noted that if the problem is not in the charger, then it is best to contact a specific service center. There they will quickly carry out the necessary diagnostics and determine the cause that you could not determine.

In many centers, all parts are in stock in order to replace the breakdown and provide the highest quality repairs. Often in all centers the price for phone repair is acceptable. Over, the advantage of the services of service centers is the provision of a guarantee for the entire phone.

A fairly common reason when the phone does not charge is the breakdown of certain electronic components in the phone. In the event of such a breakdown, in any service center, a person should be explained what is the reason for this malfunction and what to do to prevent this from happening again. It is also worthwhile to understand that when they say that the phone is not charging, they also mean the rapid discharge of the phone’s battery.

A fairly common and common reason is the breakdown of a battery due to long-term use. In such cases, you can simply replace the battery with a new one and it will last for a long period.

Very often, the phone turns off due to the discharge of the battery when a sound or vibration signal is given. This is justified by the fact that the phone once fell, and such a breakdown happened.

Not so often, but the phone is discharged due to internal problems, namely, some kind of virus. This reason only happens on smartphones. To prevent such a problem, you must remember that antivirus can be applied not only on computers, but also on mobile devices.

There are also malfunctions inside the phone, after which the phone itself cannot recognize the charger. In this case, it is unrealistic to recognize the problem and even more so to eliminate it. Here you just need advice and help from specialists.

The minimal problem is that the screen crashes. For example, after flashing the phone, the screen may not display the fact that charging is in progress, and the battery itself safely receives the necessary charge.

Samsung Galaxy turned off and does not turn on reasons

If your Samsung turned off and does not turn on, then damage to the operating system can lead to this, but this happens very rarely.

Much more often the reason is in the battery. Of course, the first thing you do is connect the charger and nothing happens.

You are confident in the outlet, in the cable, in the charger itself and in the contacts in the smartphone socket. Check these things out and make sure they are not the cause. It happens that the contacts on the battery are out of order, and this leads to the fact that the phone does not turn on.

In this situation, it can be very helpful to remove the battery and clean out the old contacts that connect to the battery.

Removing the battery will also reset the phone somewhat. The above method is only for smartphones with removable battery.

Also pay attention to the power button itself, it also does not last forever, although it does not break often, it does happen. If none of the above turned on the phone, then the problem may be inside the Samsung Galaxy phone in its components.

What to do if samsung galaxy phone won’t turn on

All Samsung phones can be restored even if they do not turn on just not all are the same.

If there is a Home button, then press it together with two others: Power and Increase sound (you need to hold down three at the same time).

If there is a Bixby button, then simultaneously you need to hold it down instead of Home. If there is neither Home nor Bixby, then hold and hold Power and Volume up together.

Release the power when the Samsung Galaxy inscription appears, and hold the steel ones for another 10 seconds until the menu appears.

Then use the sound buttons to select Wipe data / factory reset and click on Power. Then, in the same way, select and confirm Yes or Yes Delete all user data.

Finally, click on Reboot system Now. Samsung will reboot and start working like new, only all personal data will be erased.

The real reasons why the samsung smartphone turned off and does not turn on

If your phone is samsung note 2, mini, grand prime tablet tab 3, samsung galaxy, a5 2016, j3 2017, a3 2016, a7, c4 mini, j5, s8, s7, s6, a8, j1, tab 2, a6, c6 , s7 edge, c7, c8, j7, c3, s3, j2, a5 2017, s9, s4, tab 4, tab 10.1, s6 edge, j6, c5, s5, j1 2016, s4 mini, a5 2016, s4 mini, c9, gt n8000, c3, j2 prime, note 8, j5 prime, j7 2017, a3 2015, j8, tab 5, a8 plus, s9 plus does not turn on for no apparent reason, although the solution is not a fun process, very often the cause can be eliminated by yourself.

Defects are a common and well-known problem with smartphones, which we use almost without interruption and have become indispensable for us.

They are susceptible to numerous failures: it turns off and does not turn on, does not turn on and does not charge, turns off and spontaneously turns on, turns on and immediately turns off, after the update the screen does not turn on or constantly reboots, so both a smartphone and a push-button can behave.

What to do? Before heading to the service, try my options below, and whoever is friends with a soldering iron can even get inside such options, I also intend to describe. Go.

Your Samsung Galaxy smartphone does not turn on yet, let’s see what’s going on inside

Mobile devices, which work much like computers, have periodic defects that we often don’t notice. Worse when our phone won’t turn on and we don’t know how to fix it.

The answer to the question is very simple. All you need to do is go to the service, unfortunately, this is not always possible.

What can we do to avoid high post-warranty repair costs? I will advise you on how to diagnose your device.

Although the activity may seem very simple and obvious, but not everyone succeeds, and the first thing to do is to disconnect the battery.

Removing the battery and cleaning the contacts (connecting to the battery) on the phone can help.

Very often the smartphone has rusty contacts. Of course, many Samsung phones today have a non-removable battery. Then skip this step.

Removing the battery allows you to reset the phone. Second step viewing the charging connector.

Samsung Phone Won'T Start

It is worth looking into the connector with a flashlight to see if your plug is damaged from charging.

In addition to checking the power outlet, remember that the battery can also be the reason the phone won’t turn on.

The next step is to connect your phone to your computer by connecting a USB cable. If a window or driver / software installation appears on the computer, the charge controller may be damaged.

What to do? This is a little more complicated. In phones, it is often soldered to the motherboard, but there are also models in which it is a separate module.

You can try to replace the connector yourself, but if you are worried that repairing your smartphone will be overwhelming, then it is better to leave this business right away.

You can also see, for example, if the contacts have slipped off the display. This happens most often (although very rare) when the phone is dropped.

Removing the cover will allow you to check for damage. If the connector on the display is connected correctly, then you need to look for the problem somewhere else.

One of the common malfunctions in our device is when the phone vibrates in our hands after pressing the Power button, but the screen does not turn on.

Even then, you can determine that the defect is on the side of the display, and not on the charging connector or other components.

Worst of all, if the motherboard is damaged, this is the heart of the phone and does not bode well.

Even the service does not undertake its repair based on the profitability of the repair. If none of the above suggestions work, then the motherboard malfunction is almost certainly.

The repair costs in this case may be greater than replacing the display. Also, you should remember that there are data recovery companies in the event of damage to the motherboard. Success.

How to Force Restart iPhone

On iPhone 8, iPhone 8 Plus, or later, hold down and immediately release the Volume Up key and then the Volume Down key. After that, press and hold the side button until the Apple logo is displayed.

On iPhone 7 or iPhone 7 Plus, hold down the Side key along with the Volume Down button for 10 seconds or more until you see the Apple logo.

On iPhone SE, iPhone 6s, iPhone 6s Plus, or older, hold down the Home key with the Side button for 10 seconds or more until the Apple logo appears.

How to force restart an Android smartphone

Press the power button and volume down key at the same time and hold them for 1015 seconds. If successful, the device will restart automatically or display a menu on the screen in which you will need to select the restart command.

To restart some Android smartphones, just hold down the power button for a few seconds. Sometimes there are gadgets that are restarted using other keys. If the smartphone does not respond to the listed actions, type in the search engine a request for how to force restart and add your model name. Then follow the instructions found.

Take out the battery and put it back

If your phone has a removable battery, remove the cover and slide the battery out of the device. Wait at least 30 seconds and replace the battery. Then try to turn on the phone in the usual way using the power button.

Put your phone on charge

Connect your phone to a wall outlet using the original charger. If within an hour the charging indicator does not appear on the display and you cannot turn on the device, check the integrity and cleanliness of the connector, as well as the condition of the power cable and adapter. Try different sockets, if possible, replace cable and / or adapter.

Reset the machine to factory settings

If after trying to turn on the smartphone does not respond at all or the screen lights up, but the device does not boot, try restoring the factory settings using the hardware buttons.

Remember: during a system reset, you may lose personal data that has not been synchronized with the server. Do not do this if you are afraid to erase important information.

Force restart the device

Your phone may be on, but just frozen. In this case, the screen may be dark and unresponsive to any actions. So first try restarting your device using the hardware keys.

Adapter defective or missing contact

The most common reason why the phone does not boot or the charger runs out quickly is a malfunctioning charger. To verify this, you need to connect the gadget to another power supply. If it started charging, then you found the reason and the problem was in the charger. You can do the opposite, connect a known working phone to a suspicious power supply. Thus, you are guaranteed to be sure of its malfunction.

If the smartphone does not charge from a working power supply, check the connector of the contacts. A clot of dust or pet hair can get into it. Gently use a wooden or plastic toothpick to clean the socket on the phone and try again.

If your phone has a removable battery, check the contact fit and condition. There is a possibility that they were oxidized by moisture or bent when the battery was inserted after being dropped.

Another possibility to revive the battery or make sure it is working properly is to use a universal charger. In common parlance, it is called a frog and is capable of charging any removable battery from a household electrical network.

Hidden defects

Some users believe that physical damage is when the phone fell on a hard surface and shattered into smithereens. Before that moment, he also fell twice, but only a little scratched and wrinkled. Meanwhile, it is impossible to exclude the appearance of hidden defects from impact on the body of the gadget. Damage to internal contacts will lead to the fact that the Android phone does not turn on and does not charge, and sometimes it worked and suddenly turned off. So if your phone fell, it is impossible to fix the malfunction of the motherboard on your own and you will have to contact a specialist for a complete diagnosis and a possible replacement of components.

Sd card

One of the reasons why the Android phone does not turn on is the use of an SD card with a larger volume than stated by the manufacturer. The urge to experiment is in the blood of users. If the specification says that only 32 GB can be used, they will definitely try 64. With a high degree of probability, the device will recognize the card. It will work normally until the recorded amount of information exceeds the declared support.

If, after a software failure, the phone stops turning on or does not boot, just remove the problematic memory card from it. A forced reboot will bring the smartphone to a working state.

What to do if your phone won’t turn on and won’t respond to charging

Modern smartphones devices are complex and delicate enough. One fine morning, you may find that the gadget, which was put on charge, refuses to work. Today we will figure out what to do if the phone won’t turn on or boot, as well as how you can fix this problem at home.

There are not so many answers to the question why the phone does not turn on, what may be the reason for its rapid discharge and what to do in such a situation. Let’s consider the most common options and solutions.

System errors and failed updates

System errors, or a resource-intensive application that is not completely unloaded from RAM, can lead to the fact that the battery begins to discharge rapidly, as a result of which the phone turns off and does not start again. Malware can behave in a similar way. The virus, if its task is not to extortion, runs in the background. At the same time, he tries to use all available resources as quickly as possible. If the Android phone, while in the standby state, is discharged faster than usual, you should check it for infection and make a forced reboot. Further actions depend on the results of the anti-virus scan.

If the smartphone is clean and charged normally, there is no cause for concern. Otherwise, if the device does not start, or the phone runs out of power again quickly, a full reset and reconfiguration will be required.

An unsuccessful software update can lead to the phone not responding to user actions or simply turning off. Usually, this behavior is easily treated with a reboot.

In case of a failure when flashing to a new version of the OS, the situation is a little more complicated. When the phone starts up, but the download does not go beyond the splash screen, the situation can be saved by the recovery mode. What to do and how to enable Recovery Mode for a specific phone is best found on the manufacturer’s website or in the documentation for the device. When this is not possible, try generic methods. The vast majority of smartphones based on Android support it by pressing the power and volume keys. It will be an Up or Down button, depending on the manufacturer of the device. You can try both options sequentially.

Finally

If the phone does not turn on even after you have gone through all the probable reasons, you should contact the service center. Without showing excessive initiative in attempts to revive it, you will save yourself time and nerves for specialists.

Fault at the memory card level

The phone may refuse to turn on due to the SD card, especially if it was taken by hand or at an unreliable point of sale. In this case, there is a high probability that there is a virus on the card that prevents the phone from turning on. On the other hand, a serviceable but overfilled card can also cause problems to the user.

Solution: service repair

If you are faced with such troubles, either the display itself is broken in the phone, or the reasons for the problems lie in the cable that connects the screen to the board. Of course, you can try to carry out the repair yourself, but without certain technical knowledge, this can lead to the final breakdown of the phone.

We recommend that you do not risk your mobile device and take the gadget to a service where specialists will help you fix the problem.

Solution: return to factory settings

The most obvious way to deal with incorrect firmware is to roll back the phone to its original factory settings. This can be done in three ways:

Through the gadget menu;

  • Using service commands;
  • In the Recovery menu.

Solution: Frog or Power-bank

If the design of the phone allows, you can remove the battery and install it in a special frog charger. The device with a non-removable battery is connected to the power-bank.

A suddenly dead battery is a problem that even the owner of a recently purchased mobile device may encounter. In 9 cases out of 10, the problem here is associated with improper charging of the gadget. If you want your mobile phone to work as long as possible, read our recommendations in the article How to properly charge your phone

Dead battery

The most common reason why an Android phone refuses to turn on. A battery that has run out to zero. A common reason why an Android phone won’t turn on. Completely discharged battery. The solution here is simple. Connect your smartphone to the charger. Note that if the battery is empty, the phone may take a few minutes to start charging. In addition, the charger itself may not have enough power to fill the battery capacity.

Too voluminous applet updates

Almost all applications installed on the phone, especially those whose work is connected with Internet access, constantly download and install large update packages. Such updates very often overload the phone.

What to do when Samsung won’t turn on?

Why does my Samsung phone not turn on and what to do? Our service center is often contacted with a similar problem. Naturally, the apparatus becomes inoperative, and it is impossible to continue further operation. In any case, we will help you.

Why Samsung won’t turn on?

If Samsung does not turn on, first you should check if the battery itself is charged. If it is charged, then the problems may be as follows:

1.In 20% Samsung stopped turning on when the power button was damaged. Examine it as closely as possible. If there is a click when you press, then you should contact our service center for help, where our masters will replace it with a new one. It will be difficult to do it yourself.

2. Samsung shuts down in 30% if the power chip is faulty. It breaks down when power surges occur, after a shock or moisture ingress. In order for the cell to work again, it is necessary to replace the microcircuit and perform recovery actions with the printed circuit board.

3. At 20%, if moisture gets into the phone, it is best not to try to turn it on, as a short circuit may occur. Why? Because the liquid gets under the microcircuits, which leads to negative consequences.

4. 10%, if Samsung fell and does not turn on, this may indicate that the components of the printed circuit board are damaged. In order to repair your mobile, you need to make a diagnosis.

5. In 10% of cases, the program is damaged in the mobile. In order to resume work, you need to do the firmware, since most often this happens due to a software failure. It is best, when Samsung does not turn on after the firmware, entrust the task of correcting the situation to the specialists of our service center. We are often asked. Why doesn’t Samsung turn on after self-flashing? Firmware. This is a rather difficult job that only an experienced master can handle.

6. In 10% of cases, there may also be other problems. In order to identify them, it is necessary to do diagnostics.

Why Samsung disconnects?

Samsung turns itself off for several reasons. You can answer the question why Samsung turns off when you make a call or call:

1. Most often this happens if the battery has lost capacity, as a result of which, when Samsung calls, it turns off and does not turn on.

2. Samsung constantly turns off when charging, also if moisture gets into the cell or it falls. As a result of these actions, unnecessary energy consumption may appear and it is not strange why Samsung turns on and off immediately. In order to understand everything, identify breakdowns and determine their scale, and also to resume work, you just need to make a diagnosis. In our service center it will be done absolutely free of charge. Repair is carried out in a fairly short time, since all the details are available.

Real life example:

The young man’s Samsung suddenly stopped turning on. At the same time, when he put it on charge, the cell phone showed that it was charging, but it still did not turn on. As a result, he noticed that when pressed, the power button was constantly clicking. Without much thought, he turned to our service center for help. The foremen made diagnostics and found out that the power button was partially torn from the printed circuit board. Then we made a button replacement and restored the tracks on the PCB. Post-repair quality control showed that the mobile is fully functional. We also issued a guarantee for the entire device, and not just for the part.

As you can see, it’s not worth wasting time fixing your Samsung yourself. Over, such experiments do not always end well, since even more harm can be done. The faster you make a decision and entrust your phone to the masters, the cheaper it will cost you to restore it to work.

Most affordable prices.
Discounts apply.
Only original spare parts.

After the first repair, you will be issued a vip client card for a 10%.40% discount.

Stock! Until the end of the month, for any repair, ultrasonic cleaning is free.