Samsung Hotspot

Wired connection to PC

If you need to access the Internet from a regular computer that does not have a Wi-Fi module, or if you just do not want to waste your smartphone’s battery, you can use a wired connection of the gadget to a PC. When you enable modem mode in the settings of your Android smartphone, any computer running a modern operating system like Windows 8 should automatically install the necessary drivers, after which a new network connection will appear in the PC control panel.

Of course, you can access the Internet in this way only from one computer at a time, but the smartphone’s battery is not only not wasted, but even replenished while using the connection.

How to enable Wi-Fi hotspot and Bluetooth modem on Android

Difficulty level: for beginners. If you need to access the Internet from your PC or, for example, a tablet without a cellular module, but there is no network source at hand, except a smartphone, then it can be used as a wireless access point or modem. Modern versions of the Android mobile operating system already contain these functions, so installation of additional software is not required, although the necessary menu items and settings in different manufacturers’ shells may be called differently.

On the vast majority of devices, to enable access point or modem mode, you need to open the smartphone settings (in the remaining minority of devices, the tethering functions are represented by a separate application), however, further actions will differ depending on the model of your gadget. If you have a smartphone with a “native” Android shell, then you need to select the “” item in the “Wireless networks” section, and then enable “Modem mode”. In the case of Samsung’s TouchWiz shell, in the “Connections” tab, go to the “Modem and Access Point” section. Similar menus can be found in smartphones from LG, Sony, HTC and other manufacturers: they are usually found among other device connection settings.

Wi-Fi hotspot

The easiest and most frequently used way to share the Internet with a laptop or tablet is to activate the access point mode on your smartphone, in which you can connect to the gadget via Wi-Fi and use its Internet connection to the cellular network. As a rule, most smartphones allow you to independently choose the name (SSID) for the wireless network and set the type of encryption (open, WPE. A weak numeric password or WPA2-PSK. The most reliable alphanumeric password).

Some smartphones, depending on the manufacturer, also have additional functions, for example, they make it possible to prohibit the connection of certain devices or set other restrictions. The advantages of working in the access point mode include a high connection speed and the ability to connect several devices to a smartphone at once, and among the shortcomings we will write down a fast battery consumption.

. Bluetooth modem

The last method on our list to access the Internet from a smartphone is used relatively rarely, but, nevertheless, it has its advantages. Almost every Android smartphone can act as a Bluetooth modem. To do this, you need to enable the appropriate mode in the settings and connect to the device from which you need to access the Internet. This method can be very useful on the road: a Bluetooth module consumes much less power than a WLAN network card, but if one of the connected devices has an old version of Bluetooth (2.1 and lower), then such a connection will be rather slow. Nevertheless, connecting two modern gadgets with Bluetooth 3.0 or 4.0 to each other, you can get speeds comparable to Wi-Fi connection.

If you know and are able to apply all three of these methods, then you will not be left without the Internet from your Wi-Fi tablet or laptop anywhere, including on the road or in case of unexpected interruptions in connection with your home provider.

How to make a Wi-Fi hotspot from Samsung Galaxy. Samsung Galaxy how to share WI-FI. How to change the password and WI-FI name on the phone.

Smartphones Samsung Galaxy is able to distribute the Internet simultaneously to several devices, phone, computer, laptop, tablet and others. The more devices connected to your smartphone, the lower the speed on other devices, as the speed is shared among all devices. You can connect your laptop or computer to the internet from your phone wirelessly via the WI-FI hotspot on your phone.

Now let’s see how to make a WI-FI access point from Samsung Galaxy and distribute the Internet to another phone or other devices.
1) Open “Settings” on Samsung Galaxy and select “Modem and access point”. See the screenshot below, in it I selected this item in the settings.

2) Next, in a new window, we find the item “Mobile hotspot“. Look at the picture below.

3) Then we see the menu as in the picture below, in it I also highlighted the place where you need to turn on the Wi-Fi access point on the phone.

You can also set up a Wi-Fi hotspot on the Samsung Galaxy. To do this, click on three dots at the top of the screen on the right side, after which a menu should appear as in the screenshot attached below. Also in the screenshot you can see how the included WI-FI distributor should look like. It changed color from gray to light greenish.

In the menu that opens, we can configure the name and password of the WI-FI access point in android. In the picture I have highlighted these points. It is better not to touch anything except the name and passwords. In the picture, the name of Wi-Fi is “AndroidAP”, if you do not change the search for an access point on the Samsung Galaxy, then you need to look for Wi-Fi under this name, if changed, then the one you specified. After you have found WI-FI to access it, enter the password you specified. If you want to see the password, then enable “Show password” in the settings.

Also, on some Samsung androids, you can turn on the wai wai access point through the quick menu. To do this, you need to pull the screen from top to bottom and you will see a panel with icons for quick access to various functions. Next, by sliding the panel to the left or right, you need to find the access point icon and activate it by touching it. Below in the picture I have highlighted this icon, you can also go directly to the access point settings and also change the password and name of the WI-FI distributor.

If you connected via Wi-Fi to an android, but there is no Internet, check if the Internet is activated on the Samsung Galaxy to which you connected via a WI-FI access point, if the Internet is not turned on, then there will be no Internet on the connected devices.

2. Use the device as a USB modem

Using the USB modem function, a smartphone or tablet distributes the Internet from a SIM card to a computer or laptop via a USB cable.

Advantages

Samsung Galaxy is rechargeable from a laptop or computer;
The connection speed is faster than Wi-Fi.

If you use a non-original cable, the connection speed may decrease;
The Internet can be distributed to only one computer at a time;
You can distribute the Internet only to a computer or laptop.

1. How to set up Samsung Galaxy to work as a Wi-Fi router

Make sure mobile internet is working on your smartphone or tablet. If the internet is not working, set it up and turn on mobile data.

On your mobile device, open Settings.

Select the Connections item / tab. If there is no such item / tab, go to the next step.

Select Tethering Mobile Hotspot, Other networks, or .

Select Mobile Hotspot or Mobile AP.

Activate Mobile Hotspot.

You will see the name of the network and the password for it below. To change the network name or password, click on them and enter new ones.

On the other device (computer), search for the network and enter the password displayed on the Samsung Galaxy screen.

If another device (computer) does not connect to the network, check if you are entering the correct password.

If the Internet does not work on another device (computer), make sure that the Internet works on the mobile device.

If the Internet is working on your mobile device, restart your Samsung Galaxy and the other device (computer) and try again.

1. Use the device as a Wi-Fi router

Using the Wi-Fi function, a smartphone or tablet distributes the Internet from a SIM card to a computer, laptop, tablet or any other device via Wi-Fi.

Advantages

No USB cable needed;
At the same time, the Internet can be distributed to 10 devices;
You can distribute the Internet not only to a computer, but to any device with Wi-Fi.

The connection speed is slower than when connected via a USB cable, and depends on the distance between devices;
Samsung Galaxy drains quickly.

How to distribute Internet from Samsung Galaxy to computer or other device. 2. How to set up Samsung Galaxy to work as a USB tethering

Instructions for computers with operating system Windows Vista and higher.

Make sure mobile internet is working on your smartphone or tablet. If the internet is not working, set it up and turn on mobile data.

Connect your device to your computer using a USB cable. The operating system will start searching for and installing drivers.

Windows uses a standard driver for connection, which is included in the operating system itself. No additional drivers required.

If you still need a driver package for some other purpose, install the Smart Switch program, the driver package will be installed along with it.

On your mobile device, open Settings.

Select the Connections item / tab. If there is no such item / tab, go to the next step.

Select Tethering Mobile Hotspot, Other networks, or .

Activate the USB modem item.

After a few seconds, a network connection icon appears in the computer’s notification bar. Now the device works as a modem, you can use the Internet.

If the Internet on the computer is not working, make sure that the Internet is working on the mobile device.

If the Internet is working on your mobile device, restart your Samsung Galaxy and computer and try again.

How to share internet from Samsung Galaxy

There are two ways:

Phone setup

Specify the created profile as the profile that is used by default in the settings of the corresponding program (Internet browser, email client) or select it in the dialog box when establishing a connection.

Optional: Yes / No

This parameter allows you to determine whether to save sent messages or not

You can choose any of three priority levels for your messages

This is the time the phone delayed your message, you can specify any

Optional: Yes / No

When this option is enabled, you can find out whether the MMS message was delivered to the recipient or not

Optional: On / Off

If the function is enabled, a reply is sent from the recipient’s phone that the message has been read

Samsung Hotspot

The period defines the storage time of the message on the server for the purpose of its periodic delivery, if the recipient’s phone was offline at the time of delivery, etc. The maximum message storage period on the server. 3 days

Optional: Yes / No

This parameter determines whether the image will be reduced when showing MMS or not. We recommend choosing “Yes”

This parameter indicates the duration of the slide show

If you disable this option, the phone will not receive MMS messages

The phone receives new incoming messages from the MMS server without notification

Retrieve immediately

You can specify any period for downloading messages to the phone

The network does not allow the transmission of anonymous MMS, so this parameter is irrelevant

At the request of the subscriber: Loudspeaker / Telephone (Loudspeaker / Normal)

This option determines how the message sound will be played. Through the speaker or loudspeaker

This option should be disabled, since the Kyivstar network has a ban on sending anonymous MMS

Optional: on / off

If this option is enabled, the message sender receives a delivery report from the network

Specify the created profile as the one that is used by default in the settings of the corresponding program (Internet browser, mail client) or select it in the dialog box during connection establishment.

Optional: Yes / No

This parameter allows you to determine whether to save sent messages or not

You can choose any of three priority levels for your messages

This is the time the phone delayed your message, you can specify any

Optional: Yes / No

When this option is enabled, you can find out whether the MMS message was delivered to the recipient or not

Optional: On / Off

If the function is enabled, a reply is sent from the recipient’s phone that the message has been read

The period defines the storage time of the message on the server for the purpose of its periodic delivery, if the recipient’s phone was offline at the time of delivery, etc. The maximum message storage period on the server. 3 days

Optional: Yes / No

This parameter determines whether the image will be reduced when showing MMS or not. We recommend choosing “Yes”

This parameter indicates the duration of the slide show

If you disable this option, the phone will not receive MMS messages

The phone receives new incoming messages from the MMS server without notification

Retrieve immediately

You can specify any period for downloading messages to the phone

The network does not allow the transmission of anonymous MMS, so this parameter is irrelevant

At the request of the subscriber: Loudspeaker / Telephone (Loudspeaker / Normal)

This option determines how the message sound will be played. Through the speaker or loudspeaker

This option should be disabled, since the Kyivstar network has a ban on sending anonymous MMS

Optional: on / off

If this option is enabled, the message sender receives a delivery report from the network

Why is the Wifi hotspot not working on the phone

The smartphone can be used to provide wireless internet to other home or office devices. However, in some cases, the phone does not distribute the Internet through the access point. In this case, you need to consider all possible reasons, find the one that takes place, and take appropriate measures.

Eliminate OS crash

Sometimes the reason why the phone does not distribute Wi-Fi to the laptop is due to the fact that there are general problems in the operating system. Such a situation, for example, is possible in cases where a virus infection has occurred and system programs cannot work in normal mode.

Important! In some cases, an antivirus program is able to correct the consequences of its destructive effects, but this is not the case in all cases.

To eliminate them, you need to perform the following actions:

Reset the operating system to factory settings. Before that, you need to dump all the necessary information onto other media.

  • If you regularly performed the synchronization procedure using Google, then you do not need to worry about this. The data is completely safe. However, you need to take care of the safety of your documents and other information yourself.
  • Updating the OS to the latest version may help:

    In the settings you need to go to the “Archiving and reset” section. This procedure requires following the prompts on the screen.

  • Then go to the options and start the system update.
  • After that, access to the worldwide network should work at the same speed. If this does not happen, you need to update the firmware on your smartphone. Although you can do this yourself, it is recommended that you seek professional help. This procedure is available not only on Android, but also on iPhone.

    However, this option has significant disadvantages:

    • The phone is tied to the computer.
    • This way the connection is often slow.

    It is possible to distribute using Bluetooth. Why do this depends on the availability of the appropriate devices. To enable this option in the wireless settings (Additional functions) find the line “Bluetooth modem” and activate this feature. Only devices with the required adapter can access such a network.

    Why the distribution doesn’t work

    By default, a Sony, Android or other phone does not broadcast internet. For it to do this, you need to configure it correctly. If an accidental failure occurs, then the easiest way to restore functionality is to restart the phone and the device that gets access to the Internet from it. Sometimes the connection is restored as a result. If restarting was not enough, you need to make sure that the configuration was done correctly. This will help you figure out why the Internet is not working.

    To do this, go to the “Network and Internet” section. In the list of parameters, you can see the line “Access point and modem”. In different models, the name may be different, but it can be recognized by the meaning of the title. Among the parameters there is a switch “Access point”. It must be turned on.

    Next, you need to correct the parameters of the created wireless network. The parameters are indicated here: name, password, frequency range (2.4 or 5.0 GHz). After entering the data, you need to save.

    For verification, it is recommended to change the input parameters and make a test connection of the second device. Sometimes the connection may not be established due to the fact that the network is not closed with a password. In this case, you need to install it and try again.

    The reason some devices may not connect is because the frequency range is 5.0 GHz. In this case, you need to change it to 2.4 GHz.

    To make it easier to log into the network, you can try a very simple password. This is necessary in cases where problems arise due to the inconvenience of typing a long and complex password.

    Sometimes it is not possible to make a connection due to the fact that the Xiaomi phone cannot receive the Internet. In this case, the provider’s settings play an important role. It is necessary to check if they are indicated correctly on the smartphone.

    Fixing an error when distributing a network over Wi-Fi on Android

    When you cannot get the Internet from a smartphone with Android installed, the possible reasons are as follows:

    • This may be due to the work of the antivirus. It usually includes a firewall that blocks communication if it suspects that the smartphone is in danger in this case. Sometimes it is possible to go into the settings of the antivirus program and fix the situation. In most cases, in order for it to stop blocking, uninstalling this program can help.
    • Since there are often third-party programs installed on your phone, one of them can block the wireless connection. This may be the reason that Android does not distribute Wi-Fi. However, it is possible that this behavior is due to the presence of a virus. If you have malware, you can simply install an antivirus program and scan your phone. If an intervention is detected, it is enough to perform the treatment procedure. If we are talking about one of the installed programs, then it is recommended to uninstall one by one until Wi-Fi or mobile Internet becomes available again.
    • Sometimes there may be a situation where the Wi-Fi connection works, but no network is available at the moment. In this case, you need to take care of receiving and distributing mobile Internet. To do this, go to the settings, go to the “Mobile data” section and enter the appropriate parameters.

    Another possible reason that the Wi-Fi hotspot does not work on Android is that the wrong network settings are set on the smartphone. In such a situation, you need to contact the telecom operator and request the appropriate data from him. After entering them, the Internet should work.

    If the computer does not have a wireless adapter, then in this case, you can use a Samsung, Sony or any other smartphone as a USB modem. It does not require any settings on a PC and starts working immediately after the phone is connected via the USB port. To do this, you need to have the operating system Windows 7 or later installed on your computer.

    Note! To activate this mode, you need to enter the section related to wireless networks in the settings. Where additional functions are discussed, you must select the option “USB Modem”.

    How to share the Internet on HTC

    To use your HTC smartphone as a tethering device, follow these steps:

    You need to go to “Settings”, then click “Sharing wireless Internet.” It is necessary to select the item “” in the menu.

  • In the list that opens, the line “Router settings” is required.
  • The following procedure is different for different models. First, we will consider how to distribute the Internet on HTC for those phones that have been produced since 2013. In this case, do the following:

    You need to pull the icon in the upper right corner down. This will open the menu for setting.

  • Go through “Sharing”, the “Advanced” line to the router settings.
  • On the page that opens, you need to write the name of the network being created, select the encryption system (it is recommended to select WPA2 using AES) and tick the “Enable router” line.
  • A password is required to access the wireless network. It will need to be indicated on the devices connected to it.
  • After completing the above steps, the network will turn on and will be ready for use.

    Older HTC variants (released before the end of 2012) will now be considered. Here you need to perform the following operations:

    In the settings section, select wireless connections.

  • By clicking on the “” link, select the line “USB modem / Access point”.
  • In the list that opens, open the router settings and enter the network parameters (name, password, encryption method).
  • It is necessary to tick the box “Mobile Wi-Fi router”.
  • After that, the access point becomes active and begins to distribute access to the worldwide network.

    General issues

    Important! Providing access to the worldwide network is convenient in cases where a suitable service package is installed or if there is no other access option, but there is a need for this.

    It should be remembered that if you connect to the Internet with the distribution of access, then this dramatically increases the consumed traffic. Therefore, it will be a wise step to monitor it regularly in the process. You can ignore this only if you have unlimited access to the worldwide network.

    A Meizu phone or another phone can give access only if it is connected. Therefore, in the event of communication interruptions, you need to check the connection quality.

    The smartphone can act as a router, creating its own wireless network. To do this, it is enough to configure it as needed.

    Router and access point. What is the difference?

    Router and access point. What is the difference between them? This is a frequent question of our clients, especially those purchasing equipment for home or office. We will try to answer it in this article.

    Strictly speaking, a classic router and a classic access point cannot be compared. These devices have completely different purposes.

    What is an access point?

    Access point (AP). It is simply a wireless wired network “extender” that is most often used in two ways:

    Receives incoming Internet traffic over a cable and distributes over a wireless connection (point-to-point / base station mode).

    Ubiquiti UniFi Long Range

    Receives incoming data over a wireless connection and transmits further over the cable (wireless client mode)

    Ubiquiti NanoBeam M5-400

    There is also an access point operating mode in which it receives and transmits traffic over a wireless connection. Repeater or repeater mode. It is preferable to use other modes, if possible, since with such a transfer the speed drops significantly.

    In all these modes of operation, a classic access point simply broadcasts traffic, without any operations with it. If several devices are connected to a WiFi point, then the bandwidth between them is divided equally, as in the simplest switch. The wired interface in indoor access points is usually limited to one LAN port.

    What is a router?

    Router (router). It is a smarter device that not only receives and transmits data, but also redistributes it according to various established rules and executes specified commands. He can:

    • Route data packets (Internet traffic) between different networks and subnets;
    • Assign IP addresses to computers and other devices that are connected to it;
    • Provide their network protection (firewall);
    • Limit traffic speed and much more. Depending on the type and cost of the model.

    Before the popularization of wireless technologies, routers were produced without WiFi support. A classic router had only a wired interface, and it would not have occurred to anyone to compare it to a WiFi access point. And now multiport carrier-class models are produced without a radio module:

    The confusion arose precisely when the routers were equipped with WiFi transmitters, and, in fact, combined the functionality of a router and an access point in them. This gave rise to many modifications.

    The most common question: “What is the difference between an access point and a router” arises in relation to indoor access points and inexpensive wireless routers for the SOHO segment. They differ little both in appearance and in cost. Compare:

    From all of the above, a few simple key differences can be deduced:

    • Access point. It’s just an access point. Wifi router. This is an access point, two in one.
    • In most cases, a WiFi router is designed for indoor use. Access points are very different. For indoor and outdoor use, for connecting several clients and for connecting one, with a built-in antenna and with the need to buy an antenna separately.
    • An indoor access point most often has only one port for connecting a cable. For incoming traffic. A wireless router usually has several ports so that devices can be connected via both a WiFi connection and a network cable.

    How a WiFi router and an access point differ in practice?

    The theory is, of course, good. But what are the specific opportunities offered by buying a Wi-Fi router? Is it worth paying more for it (if it is more expensive)?

    As we discussed above, there is no point in talking about expensive carrier-grade routers. Let’s compare solutions for home and office.

    Wifi routerAccess point
    By connecting the router first to the provider’s cable and setting it up once, you do not have to configure separately each computer or laptop connected after it in the home / office network.The device located in the network after the access point will need to enter the provider’s settings.
    You can easily organize a home network: the router will act as a dhcp server, distribute IP addresses within the network, all you need to do is connect the devices to the configured router. He will do the rest himself.You will have to tinker with your home network settings, including, possibly, getting additional IP addresses from the provider.
    The router has the functionality of a firewall, built-in firewall, which means it provides improved network protection.The access point does not have any protective functionality, except for the simplest traffic encryption.
    If you need a high connection speed for some tasks. You can always connect your computer to the router using a network cable and get the maximum speed that the provider gives.Most access points do not have a wired interface for transferring data to end devices, and the wireless connection speed is not suitable for all tasks.
    For some highly specialized programs / interfaces to work, it may be necessary to configure port forwarding on the router, since the internal IP address of the devices is not available “outside” from the router subnet.The access point transparently broadcasts traffic, which is good for some highly specialized tasks. The IP address of the end device is accessible from the outside without additional settings.

    Output. In most cases, to distribute the Internet to several home devices. Computer, laptop, smartphone. It is better to purchase a WiFi router and connect the provider’s cable to it. Especially if the router is inexpensive.

    For other purposes: receiving traffic from the provider over a wireless connection, organizing a seamless WiFi network in the office, HotSpot in a cafe or hotel. You need an access point. If you need advice, we will help you find a solution for each specific task.

    Yak nalashtuvati Samsung Galaxy for robot in a USB modem

    Instructions for computers with operating system Windows Vista and Vista.

    For the additional “USB-modem” function, a smartphone or a tablet distributes the Internet from a SIM-picture to a computer or a laptop via a USB cable. It is not possible to create the Internet from a computer on Samsung Galaxy, for which buy a stationary router.

    For vikoristannya:

    If the system does not go out to know the driver, install, or do not start the Smart Switch (Kies) program. At the end of the day, in the attachment manager (Start → Control Panel → Attachment Manager) of the computer, the following will appear:

    As soon as on computers there are pardons, to get help for help to the dealer of the operating system Windows (Microsoft), or the virobnik of your computer.

    If the icon is connected before the mark appears, but the Internet is not working, change the setting of the mobile Internet to Samsung Galaxy. Do not forget to reconsider the balance of the SIM card and the signal.

    Iakshto nalashtuvannya virne, ale the Internet is not working, rewrite Samsung Galaxy і computer, і try new.

    Perevagi:

    It is not necessary to install the driver and the driver;

    One hour the Internet can distribute 10 attachments.

    Establishment of a mobile access point.

    You can change the standard parameters of the access point. To turn on the item “Mobile access point” and click the “Options” button, Viberit the item “Set up an access point”.

    Available advanced parameters:

    Ssid. Іm’ya access points, yaku will bachiti when you make a joke;

    Bezpeka. Vimagati password (WPA2 PSK) or connect without a password (Vidkritiy);

    Password. Obov’yazkovy, as in the field “Bezpeka” refer to “WPA2 PSK”. Dovzhin password. Not less than 8 symbols, pick only Latin letters and numbers;

    Prikhovannya pristіy. Receive SSID and enable manual input when connected. It is not recommended for vicoristannya pochatk_vtsy koristuvacham;

    Broadcast channel. Change of frequency range and change. For pochatkіvtsіv koristuvachіv it is recommended to vibrate the value “Auto”. The price of setting up is not on all outbuildings.

    By setting up the button “Save” and turning on the access point.

    Perevagi:

    Samsung Galaxy can be charged from a laptop or a computer;

    Shvidkist z’єdnannya vishche, nіzh when connected via Wi-Fi.

    Yak nalashtuvati Samsung Galaxy for robots at a Wi-Fi router

    For the additional function “Wi-Fi access point”, a smartphone or a tablet distributes the Internet from a SIM-picture via Wi-Fi.

    For vikoristannya:

    As soon as the attachment is not far away, connect to the net, turn it over, and enter the password correctly.

    If the icon is connected before the mark appears, but the Internet is not working, change the setting of the mobile Internet to Samsung Galaxy. Do not forget to reconsider the balance of the SIM card and the signal.

    Iakshto nalashtuvannya virne, ale the Internet is not working, rewrite the offense of the attachment, and try the new.

    Yak to distribute the Internet

    Be victorious in two ways: