Samsung Galaxy tablet reset to factory settings

How to make a complete reset on the Galaxy Tab S5E | Simple steps to factory reset or general discharge

There are situations that sometimes require decisive measures when it comes to the elimination of problems. When it comes to Android problems, one of the effective ways to solve problems is hardware reset. The hardware reset, widely known as a reset to factory settings, is an important solution that is usually carried out when all the main steps to eliminate problems were exhausted. You must resort to this decision only if you think that the problem is related to the software. Reset to factory settings will not solve problems with equipment, for example, if you are faced with a bad screen or a broken motherboard. Many Android users consider the reset of settings to factory settings as an omnipotent solution that can solve the whole range of problems. The fact is that this is limited only to the return of software settings to factory values. Although this is usually effective for correcting low.Level errors, full reset cannot solve the problem with encoding or programming at all. It is unnecessary to say that the knowledge of how to complete the full reset on the Galaxy Tab S5E may come in handy if you encounter problems that require this.

Before continuing, we want to remind you that if you are looking for a solution to your own problem with #android, you can contact us using the link at the bottom of this page. Describing your problem, be as detailed as possible so that we can easily find a suitable solution. If you can, include accurate error messages that you get to give us an idea where to start. If you have already tried to perform some actions to eliminate problems before sending us an email, be sure to indicate them so that we can skip them in our answers.

There are three ways to complete the Galaxy Tab S5e settings full of settings. We will show you how each of them is performed in this guide.

What is Hard Reset on Android

This is a complete reset of settings and cleaning memory. Before you decide to make a complete reset, copy your contacts, photos and other files to a safe place.

Let’s start with a light option. Go to the Settings section. Backup and reset. Resetting settings.

For those who are not able to perform the first option due to the graphic key / pin code / password or for other reasons.

  • Turn off the mobile device or pull out the battery and insert it back if you can’t turn it off;
  • To go to Recovery Menu, press and hold the volume increase button and the power button at the same time;
  • When the logo appears on the screen. Release the power key, but hold the volume button upwards;
  • Now you are in Recovery Menu. Moving on this menu is made using volume buttons, the power button confirms the choice;
  • Choose the item “Wipe Data/Factory Reset”. Erasing files;
  • Choose YES.Deletealluserdata for confirmation;
  • The cleaning process will be performed for some time, after which you will be redirected to the Recovery menu;
  • Choose a Reboot System now item;

You made Hard Reset on Samsung Galaxy Tab 10.One. All passwords and graphic key are deleted. If questions arise, leave them through the Комментарии и мнения владельцев system.

What is Hard Reset on Android

This is a reset of settings to the factory state and cleaning the internal memory. Before you decide to make a complete reset, copy your contacts, photos and other files to a safe place.

See also  Samsung Smart view does not show the pin

Let’s start with a quick option. Go to the Settings section. Backup and reset. Resetting settings.

samsung, galaxy, tablet, reset

For those who could not repeat the first instructions for some reason due to a graphic key or a PIN code of Android.

  • Turn off the phone or pull out the battery and insert it back if you can’t turn it off;
  • At the same time, press and hold the power button and the volume up, after that you will get into the Recovery Menu;
  • When the logo appears on the screen. Release the power key, but hold the volume button upwards;
  • Now you are in Recovery Menu. Moving on this menu is made using volume buttons, the power button confirms the choice;
  • Choose a “Wipe Data/Factory Reset” item. Which means erase all the data;
  • Choose YES.Deletealluserdata for confirmation;
  • The cleaning process will be performed for some time, after which you will be redirected to the Recovery menu;
  • Choose a Reboot System now item;

You made Hard Reset on Samsung Galaxy Tab 8.9 LTE ​​is completed. All passwords and graphic key are deleted. Nothing complicated!

What is Hard Reset on Android

Full reset to factory settings and cleaning internal memory. Before you do a complete discharge, we recommend that you save all important files and contacts for a shift medium or download it into a cloud.

Let’s start with a light option. Go to the Settings section. Backup and reset. Resetting settings.

How To Reset Samsung Galaxy Tab S. Hard Reset and Soft Reset

If you could not repeat the first option, here is the second instruction with a 100% result, it is a little more complicated.

  • Turn off the mobile device or remove the battery and insert it back if you can’t turn it off;
  • To go to Recovery Menu, press and hold the volume increase button and the power button at the same time;
  • Release the power key after the logo appears on the screen, but hold the volume button;
  • You got on the Android Recovery menu. Moving on this menu is made using volume buttons, the power button confirms the choice;
  • Choose the item “Wipe Data/Factory Reset”. Erase the data;
  • Confirm the action by choosing YES.Deletealluserdata;
  • After a few seconds, the cleaning process will end and you will again get on the Recovery menu;
  • Choose a Reboot System now item;
See also  How to make a screenshot on the samsung tablet

You made Hard Reset on Samsung Galaxy Tab S 10.5. All passwords and graphic key are dropped. Nothing complicated, even a beginner will cope with our instructions. However, if you still have questions, leave them through the Комментарии и мнения владельцев system.

How to reset Samsung phone settings

As above, the reset of factory data can solve many problems. However, your Samsung phone will also be empty, like the new. Seriously, all personal data and settings will be completely deleted from your phone. If you do not make a reserve copy of Samsung before dumping it to the factory settings, you will lose everything.

For people who previously encrypted an inserted SD card, you need to decipher the SD card before resetting the Samsung phone settings. Because your Samsung phone will not be able to read the saved data of the SD cards without your resolution. Now let’s see how to completely erase the Samsung phone.

Step 1 Turn on your Samsung phone. Open the “Settings” application on the main screen. Scroll down and select general control from the list.

Step 2 Press the “reset” to get all the android discharge parameters. Twice select Factory Data Reset. Later, click “Reset” or “reset the device”. It depends on which Samsung device you use. If necessary, enter the security lock.

Step 3 You will receive a notification that all your personal information and uploaded applications will be deleted. Click “Remove everything” to confirm and discharge the settings of the Samsung S10/9/8/7/6/5 and others. To display the phone on the Android recovery screen, one or two minutes will be required.

Step 4 After the recovery of the Samsung factory settings you will be on the screens of greeting. Now you can configure Samsung and restore data using Fonelab Android Backup Restore.

Note. If your Samsung phone is running Android 6.0 (Marshmallow) or earlier version, you can choose “Settings” “Reserve and reset” “Reset of factory data” “Reset the device” “Delete everything” to dump the Samsung phone settings to factory settings.

Why reload the Samsung tablet

Samsung tablets are created taking into account the needs of their users. But sometimes we cannot get rid of some problems and problems for the correction of which it may be necessary to reset. If you like to use the tablet and experience inconvenience for most of the time, perhaps this is the best time for you to find out how to lose it. But before we continue, you should read the information about why you need to restart the Samsung tablet:

  • Firstly, the reloading of the Samsung tablet can solve various problems on the device, which can help increase its performance and prevent unwanted freezing of the screens, immune behavior and slow / slow work.
  • Reset will help you restore default settings or delete all your personal information, which is useful when you want to start working with a tablet from scratch.
  • In addition, the reset of the Samsung tablet settings will help your device free up the storage space, since unnecessary, unnecessary files and data will be deleted.
  • Finally, the reset will be useful if you need to save your personal data and security information.
See also  How to unlock the Samsung phone if you forgot the code

How to complete a full reset on the Galaxy Tab a 10.1 | Simple steps to restore factory settings or general discharge

Below are specific steps to complete the full discharge on your Galaxy Tab a 10.One.

This is the easiest way to erase data from your Galaxy Tab a 10.One. All you need to do is go to the “Settings” menu and perform the following actions. We recommend this method if you do not have problems with the transition to settings.

  • Create a backup of your personal data and delete your Google account.
  • Open the “Settings” application.
  • Scroll and click “General Management”.
  • Click “Reset”.
  • Select the reset of factory data from the specified parameters.
  • Read the information, then click the “reset” to continue.
  • Click “Delete everything” to confirm the action.

How to complete a full reset on Samsung Galaxy Tab a 8.0 (2019) through the settings menu

If the settings menu are available and you have no problems with its loading. This should be your first choice when restoring factory settings. All you need to do is go into “Settings” and follow the instructions for resetting the device settings. Be sure to create a backup copy of your personal data and delete your Google account. The second. To prevent problems with the protection against reset to factory settings.

If you have not tried to do this before, this is what you need to do:

Samsung Galaxy Tab A (2019): How to make a factory data reset (hardreset) with the buttons?

  • Open the settings application.
  • Scroll and press the general control.
  • Click the reset.
  • Select the reset to the factory settings from the proposed options.
  • Read the information, then press the reset. To continue.
  • Click Remove everything. To confirm the action.
  • That’s all!

How to restore the Samsung Galaxy Tab S5e factory settings using Find My Mobile

Find My Mobile is a special Samsung service that allows Samsung devices to determine the whereabouts of their phones and remotely manage them in case of loss, remotely track them, unlock the screen, save data, etc. D. Block access to Samsung Pay or delete all data (return to factory settings).

Please note that you will not be able to use the Find My Mobile service if you have not activated it on the device before it lone.

We assume that you already have a Samsung account. If you do not have it, be sure to create a Samsung account first. Then use your information to activate Find My Mobile.

In the future, if you lose your phone and want to remotely erase his data, this is what you need to do:

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE