Samsung Digital Channel Setup
Table of Contents
1. How to find and configure channels
To make the TV show channels, run auto tuning. Auto Tuning helps you quickly find and arrange channels in order. Below you will find instructions for the various Samsung TV series.
Click here for Auto Tuning on H Series TV
Connect the wire from the antenna to the AIR / CABLE connector.

Select source: press Source button, select TV.
Enter the TV menu: depending on the remote, press either the Menu button or the Keypad button and select Menu on the TV screen.
Select Auto Tuning, then Auto Tuning again.
The TV can receive free (terrestrial) channels from a common house (it stands on the roof and is used by the whole house), an indoor antenna (a portable antenna, usually looks like two metal rods) or from a cable operator (a common house antenna or a separate wire can be used). If you do not know what kind of television you have, contact the management house company.
In the Antenna item, select:
Antenna (if using a common house or indoor antenna)
Or Cable (if using cable TV).
Select channel type. Digital.
If you are tuning cable TV, set the Search Mode to Full.
Select Scan to start searching for channels.
Wait for the auto-tuning to complete.
When auto-tuning is finished, select Close.
To exit the menu, press the Return button on the remote.
Click here to learn about auto tuning on an F-series TV
Connect the wire from the antenna to the AIR / CABLE connector.
Select source: press Source button, select TV.
Enter the TV menu: depending on the remote, press either the Menu button or the button and select Menu on the TV screen.
Select Auto Tuning, then Auto Tuning again.
The TV can receive free (terrestrial) channels from a common house (it stands on the roof and is used by the whole house), an indoor antenna (a portable antenna, usually looks like two metal rods) or from a cable operator (a common house antenna or a separate wire can be used). If you do not know what kind of television you have, contact the management house company.
In the Antenna item, select:
Antenna (if using a common house or indoor antenna)
Or Cable (if using cable TV).
Select channel type. Digital.
If you are tuning cable TV, set the Search Mode to Full.
Select Scan to start searching for channels.
Wait for the auto-tuning to complete.
When auto-tuning is finished, select Close.
To exit the menu, press the Return button on the remote.
4. Where to get frequencies for manual channel tuning
The frequency list depends on your TV operator and region. Usually it is published on the website of the TV operator. For example, the list of channels and frequencies for Rostelecom.
To clarify which company provides television services, you can contact the management company.
Click here to learn about auto tuning on a K-series TV
Connect the wire from the antenna to the AIR / CABLE connector.
Select source: depending on the remote, press either the Source button or the Home button and select Source, then TV.
Enter the TV menu: depending on the remote, press either the Menu button or the Home button and select Settings on the TV screen.
The TV can receive free (terrestrial) channels from a common house (it stands on the roof and is used by the whole house), an indoor antenna (a portable antenna, usually looks like two metal rods) or from a cable operator (a common house antenna or a separate wire can be used). If you do not know what kind of television you have, contact the management house company.
In the Antenna item, select:
Antenna (if using a common house or indoor antenna)
Or Cable (if using cable TV).
Select channel type. Digital.
If you are setting up cable TV, install:
Operator Selection. Others
Search Mode. Full.
Select Scan to start searching for channels.
Wait for the auto-tuning to complete.
When auto-tuning is finished, select Close.
To exit the menu, press the Return button on the remote.
Samsung setup
Enter the menu and go to the “Channel” section;
Once everything is found, you can watch the digital and terrestrial channels available in your area.
Setting up digital TV on Samsung
Digital TV appeared in Russia a few years ago and has been actively used ever since. And this is quite understandable. Firstly, having completed the setup just once, you do not need to constantly adjust the antenna or reconfigure the TV in order to watch something else. Secondly, such television has no interference in the form of stripes or snow. True, if there are any problems with the signal, then you will not be able to watch the programs.
Dtv format television is very popular among the population. If you want to connect free channels to your TV, then you do not have to call a specialist, since everyone can do this. The main thing is that your model supports DVB-C tuner standards.
Most of Samsung’s devices follow these standards. It can be both an outdated model and 6 series Smart TVs. Therefore, now we will tell you about what you should do to set up digital channels for Samsung of modern and older series.
Setting up Samsung Smart TV
On TVs of the latest series with Smart TV function, it is easier to set up analog TV. To do this, you will need to perform fewer steps.
Go to the Menu and go to the “Broadcast” tab marked with the antenna;
You can now enjoy watching TV.
Samsung Brand Ownership Instructions
Deciphering of SAMSUNG TV models
Dvb-C input in usi models, repaired since 2009 by vipusku (letters index B, C abo D).
Before adjusting, it is necessary to set the following parameters in the menu: Country. Slovakia or Slovenia, Avtoposhuk of digital and analogue channels, Dzherelo. Cable, Merezha.
Signal algorithms for adjusting digital channels for the latest models of SAMSUNG RK TVs
1. Onslaught on entering the menu. (green button);
2. Vibiraєmo in the menu. Channel (pictogram Suputnikova antenna);
3. Vibiraєmo. Avtonalashtuvannya;
4. Vibiraєmo. Dzherelo signal. Cable;
5. Vibiraєmo. Digital;
6. Onslaughtєmo. Start.
Nalashtuvannia takes about 5-10 khvili.
Adjustment of digital channels on TV sets of the Samsung trademark 2010 to vipusku i dal
1. In order to set up digital TV channels for the most important number of Samsung models, press the Menu button on the DK remote control, you will see the TV menu, in which case you will need to vibrate the Channel (Suputnik antenna icon). Tv set to request a pin-code, if you did not change it, then enter 0000. For the clarity of the necessary parameters, send the message of the Central Television Bank, see the Channel. Land menu for setting up:
2. Cross over from the menu Channel. Vibrao Antenna Cable.
3. Open the menu Channel. Cable parameters. Bobbin frequency. 298000khz, Finishing frequency. 362000 KHz, Transmission speed. 6952 KS / s, Modulation. 256 QAM.
4. Open the Channel. Auto Adjustment menu. Dzherelo signal. Cable, Channel type. Digital.
5. Type of channels you select on your own investigation, you can only know digital channels, or digital analog. Natisnіt Dali.
6. Poke mode: Merezha.
7. Press the Push button. In order for the channel to end, press OK.
8. For an automatic joke, you will know how to use digital channels. If you want to show it, you will only be included in the packages of digital TV channels you have selected. The best channels are the best.
9. Sorting channels. Open the Channels menu. Channel Manager. Vibrate the required channel (or the decal, behind the additional button Z (zhovta) on the remote control panel), press the Tools button on the remote control panel and vibrate Vidality.
10. The confirmation of the vibration channel will be visible.
11. To sort the channels, select the required ones in the Channel. Channel Manager menu, press the C button, then the Tools button, the Sorting menu and change it in the required order.
When SMART TV is present
Know the Smart Hub button on the remote control, press and vibrate the Channel icon. Continue browsing the list of channels, near the upper right kuta vibrate Redaguvannya.