Reflash Xiaomi Redmi Note 2 Phone

Reflash Xiaomi Redmi Note 2 Phone

Detailed instructions for flashing the Xiaomi Redmi Note 2 smartphone to a new Russified, custom firmware.

With firmware version 5.10.15, Xiaomi began signing its firmware with a unique encrypted key. And this leads to the fact that through the standard (stock. mi) recovery will be stitched, no matter what method, only the original Anglo-Chinese firmware! If you try to flash any other firmware through it, an error will occur signature verification failed!

Custom TWRP Recovery firmware

Download drivers for connecting a PC with a Xiaomi Redmi Note 2 phone. MTK_USB_Al_0.9. 7, download and then install.

If you want to flash Xiaomi Redmi Note 2 on custom firmware or on Russified firmware, you first need to install custom recovery on your smartphone.

Download the Flash Tool or Flash Tool firmware program for linux and the custom recovery TWRP_Recovery for Xiaomi Redmi Note 2 itself.

Stock (original recovery) Xiaomi Redmi Note 2. stok recovery for flashtool

Unzip the contents of the archive to a folder on drive “C”.
Run the program as administrator, press the button with the inscription Scatter-loading, point to the Android_scatter file in the folder where the custom recovery was unzipped.

Next, just press the “Dowload” button, after which we remove the battery from the phone and connect it to the PC, immediately after connecting the firmware process should automatically start.

A red download bar appears, then yellow and the OK sign.

All. Take out the cable, insert the battery. Hold simultaneously two buttons (on / off and volume) until the white Mi icon appears on a black background. Let go, wait. On the first screen that Mount appeared before the Never show this screen during boot again checkmark, then swipe and that’s it. Reboot System everything works.

NVRAM removal via TWRP2.8.7.0- bilingual edition

We go into the recovery in one of the ways.
1. Method Clamp the power (on) and the volume at the same time, as soon as the logo appears, release it on, hold the volume. Your recovery will load.
2. Update Method—click the three dots at the top (.).Select “Reboot to Recovery”

Go to Backup—tick NVRAM, other daws can be removed. and move the slider to the right.

Firmware Xiaomi Redmi Note 2

Next, you need to download any firmware you like, for example:

Copy the firmware file to the SD card
We go into the recovery in one of the ways.
Method # 1 We simultaneously hold down the power button and the volume, as soon as the MI logo appears, release it on, hold the volume. We boot into the previously installed recovery.
Method # 2 We are looking for the Update program icon on the desktop, go. click the three dots at the top (.).Select “Reboot to Recovery”.

Select Wipe—Advanced Wipe and in the next window we tick off as on the screen, after that we do a swipe to the right. We return to the main menu and go to Install. In the top line, select the place where our firmware is located. “Phone memory” or “SD card”
Confirm by pressing the button “OK”

We find our firmware file, click on it, and confirm with swipe to the right

After completing the firmware, windows will appear where you can make Wipe first and then Reboot.
We are waiting for the firmware to be installed on the Xiaomi Redmi Note 2 smartphone, usually this process lasts 5-10 minutes, but sometimes it can take up to 15-20 minutes.