My iPhone’s Wi-Fi keeps crashing

steps to fixing the causes of WI-FI dropouts on your iPhone when it works and locks up

When buying an expensive smartphone from one of the most popular companies in the world, every customer dreams of getting a phone that will work without stuttering or problems. But keep in mind that there is no such thing as a perfect gadget. You can find some flaw in everyone. A lot of iPhone users have been complaining about the instability and instability of connection to the Wi-Fi network. And as it turns out, free access to the web is now considered one of the most demanded in any smartphone. So it is worth to understand why the iPhone loses Wi-Fi?

If iPhone loses Wi-Fi, the first reason for the lack of connection may be a misconfigured router. The transmission quality and speed also depends on its good condition. On the smartphone, this is displayed as follows:

  • Wi-Fi connection does not work.
  • Very slow connection, often freezes.
  • Internet icon blinks gray or disappears at all.

It is also worth remembering that when you save charge or when the smartphone will be locked, the connection may be poor or even interrupted at all.

Then you should check the router, because in some settings there is a function “Turn off automatically channels”, which are not used often. It is quite easy to control the moment. It is enough to organize a connection via local network in any public institution or try another router, but at home.

Troubleshooting iPhone 11 Pro Max that keeps disconnecting from the Wi-Fi network

Proximity matters when it comes to wireless signal stability. To make sure distance isn’t an issue, move closer to your wireless router or modem and see if it will amplify and boost the signal your iPhone receives from your Wi-Fi network. If your phone is too far away from the network equipment, the signal it receives is weak and therefore prone to accidental disconnections. Obstacles such as thick walls and devices that can cause wireless interference can also be eliminated. If this doesn’t solve the problem, try the following solutions.

Like other electronic devices, wireless routers and modems are also prone to occasional firmware failures. When this happens, different types of symptoms can occur, from slow internet to intermittent or no internet connection at all. In most cases, minor firmware failures on networking equipment can easily be fixed with a power cycle or reboot. So if you can currently access your modem or router, follow these steps to turn it off:

  • On the modem/router, press the power switch to turn off the device.
  • While it’s completely off, disconnect its AC adapter from the power source and leave it on for at least 30 seconds.
  • After the specified time has elapsed, turn it back on and turn it back on.
  • Wait until all the lights are stable. Also make sure that the signal light on the modem/router itself is on and lit steadily.
See also  How to take selfies on iPhone

Your iPhone should then restore the wireless signal and connect to the Wi-Fi network, if you’ve set it up to connect automatically. Otherwise, manually connect to your Wi-Fi network.

How to fix an iPhone XR that has no Wi-Fi internet connection in iOS 13

First solution: reboot your iPhone (software reset).

A soft reset removes minor network errors, including those caused by updates. If you haven’t already, do this as the first possible solution to fix the occasional Wi-Fi outage on your iPhone. Here’s how it’s done:

  • Press and hold the side button and any volume button for a few seconds, then release when the power off slider appears.
  • Then drag the slider to turn off your iPhone completely.
  • After 30 seconds, press and hold the side button again until the Apple logo appears.

After restarting your phone, reconnect your iPhone to the Wi-Fi and then see if the Wi-Fi internet continues to work or not.

How to fix iPhone 8 keeps losing Wi-Fi signal after iOS 13 update

Third solution: forget the Wi-Fi network to fix your iPhone 11, which constantly loses Wi-Fi signal.

The Wi-Fi network your iPhone is connected to may be corrupted and no longer working. In this case, you’ll need to forget or delete the problematic wireless network so you can join it or connect to it like you did the first time. Here’s what you should do then:

  • To get started, go to the iPhone Settings menu. “Wi-Fi” and make sure Wi-Fi is turned on.
  • Scroll down to the list of available networks, then select your Wi-Fi network.
  • Tap the “i” information icon next to your Wi-Fi network name or SSID.
  • Then click on the Forget this network option.
  • When prompted, tap “Forget this network” to confirm.

It’s also recommended to remove other unwanted Wi-Fi networks from the list to prevent your device from automatically connecting to an unsecured remote Wi-Fi network and thus avoid problems, including Wi-Fi signal loss.

See also  How to remove search on iPhone

Wi-Fi hotspot not working on iOS 13

The hotspot in iOS 13 can work intermittently, but Apple only noticed this now

I have an iPhone 8 Plus and have long been plagued by persistent issues with my wireless hotspot either not being detected by third-party devices at all or spontaneously disconnecting even if I manage to connect to it. As a rule, the connection breakdown occurs about 20 minutes after it is established. However, with my wife, it is even worse. her access point does not appear in 9 out of 10 cases. That is, the devices, whatever they are, just can’t see the hotspot and can’t connect to it,” writes one user.

A cursory analysis of the situation showed that interruptions in the operation of the personal access point are quite common. Users from all over the world and regardless of the model of iPhone or iPad they use are facing this problem. On the other hand, it is obvious that the problem affects users selectively, because there are quite a lot of people who have not encountered this deficiency and have not even heard of its existence. All of this leads to certain thoughts.

How to tell if an iPhone is having trouble with Wi-Fi

In fact, there are a variety of symptoms. The most obvious. if the Wi-Fi connection slider has become inactive, or iPhone simply refuses to connect to any Wi-Fi network. There can also be constant connection failures and a significant decrease in Internet speed. by 10 times or even more.

In some cases the problem can be solved by firmware update, but in most cases, as a rule, the Wi-Fi chip fails. It can break down as a result of a fall or water in the device, or due to a malfunction of the chip itself Wi-Fi chip, a short circuit on the motherboard. It’s also possible that the soldering is broken.

Hardware failure of Wi-Fi module

This hardware malfunction is not related to the operating system firmware or software that contains malicious files. The problem can be solved by the service center specialist. Poor repair affects the functioning of the device, not just Wi-Fi.

Caution! Further actions may lead to the failure of the modules of your smartphone!

A few tips for restoring your phone’s hardware on your own:

  • turn on your smartphone. Warm it with hot air from a hair dryer (device on high power). Notification appears on the screen that the temperature is too high. stop heating. The final step is to reset the gadget;
  • If there is no connection to the local network, hold the phone in the freezer, reboot.

Also, poor wireless network operation is possible after a defective repair, for example, after replacing the screen. The iPhone screen is specially designed to provide better reception through the metal ring on one of their screw holders. Either the metal ring is missing on your shield, or the screw is loose. Sometimes a rusty screw can cause a weak Wi-Fi signal.

See also  How to set the weather on Huawei. How to change the weather on your phone?

Look at the image of the top with the metal ring:

It is worth remembering that the iPhone is a device that requires a special approach. Repair work is carried out by a specialist, so if you are not confident in the correctness of the above actions. do not take the risk.

Incorrect settings of the phone

Why doesn’t Wi-Fi work on your phone. how to fix the problem

Wi-Fi can be turned off because of the wrong settings on your phone. It is necessary to check the correctness of the entered information:

  • Open the system settings and find the “Wireless networks” item.
  • Go to “Wi-Fi” and open the “Advanced settings.
  • Next to the option “Sleep mode for access point” about.
  • After that it is necessary to reboot the device, and the wireless network cannot disconnect by itself.

Users often ask why the wireless access point on their phone is disconnected. First of all, the problems are related to incorrect network settings of the smartphone or router. You should also disable conflicting software to avoid failures when connecting to Wi-Fi.

Why does the modem mode disable on my iPhone

There are many options. There are certain tips: for example, one of the reasons is the enabled VPN. Go to settings and turn it off. You could try disabling geo-positioning, resetting your iPhone, or keeping the screen constantly on. I have noticed that more often the connection is cut off when the iPhone has a bad cellular signal, such as a single LTE division. The best way out of the situation. switch to 3G, the speed will be lower, but dropped connections less often.

There is still no working solution to this problem. Apple turns a blind eye to it and does not fix anything. This is surprising, because the company promptly releases updates if there is any significant problem. Apparently, the disconnection when the modem mode is working is not so fatal according to the company, although it jeopardizes the whole concept of working of devices in the single ecosystem of Apple.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE