Monitor Turns Off When Booting Windows 7

I do not want to be commonplace, but the so-called "black screen problem" when the operating system boots after turning on the computer. One of the most common problems owners of both desktop computers and laptops face. An operating system that does not boot or a hard disk model does not matter much when diagnosing a problem. About how to remove the black screen when loading Windows 7, Windows 10 on a computer and laptop, the reasons for the failure, we will describe further.

This guide will be supplemented, so do not hesitate to ask questions, I will clarify the technical aspects as much as possible and solve your problems with the black screen.

Content:

The most likely causes of a black screen when loading

First you need to list the most common problems that cause a black screen, after which the operating system does not load (in other words, when you turn on the computer, a black screen). In rare cases, after loading, the user sees not only a black screen, but also a cursor. Causes:

  1. Conflict of the operating system, which is why it cannot load the graphical environment normally.
  2. Video driver problem (incompatibility with the current operating system: for example, Windows 10 or Windows 7, up to XP)
  3. Failed hard drive on a computer or laptop
  4. Windows OS crashes and does not load correctly (not in safe mode)
  5. Other hardware problems or system conflicts
  6. Windows cannot wake up

Starting Windows in safe mode on a computer

One of the most likely reasons why Windows or another operating system does not boot. system conflict, due to which the OS cannot work correctly after turning on the PC. This can be caused, for example, by the fact that the user installs an incompatible program or drivers that conflict with Windows, and when you turn on the laptop / PC, the conflict will make itself felt in an unpleasant way. in the form of a black screen. How to remove it?

Fortunately, the Windows developers have provided the possibility of a safe mode of entry into the operating system, which is designed specifically to eliminate various compatibility problems. Entering safe mode, you can remove all problems on the computer, resolve conflicts, and then load Windows OS in normal mode.

So, to enter safe mode on the computer:

  1. Remove all media and devices from the computer that may affect the loading of Windows (flash drives, disks, etc.)
  2. Restart or turn on the computer, depending on its current state.
  3. To enter safe mode, hold down the F8 key during boot. If your PC (laptop or desktop) has several operating systems, then select the appropriate one from the list and then hold down F8 again to switch to the safe boot mode for Windows.

Further, in the boot options in safe mode, you can select one of the items and solve the problems of a black screen on a laptop or desktop computer.

Problems with the monitor or accessories

The reason for the black screen may lie on the surface: the monitor does not work. This may be due to the fact that the contact between the monitor and the video card is lost or the power cable is damaged / not plugged in. Therefore, be sure to check the connection.

As for the laptop, it is unlikely that the matrix "fell off" from the system board. To disable it, you need good reasons: for example, a mechanical effect on the display. At the same time, you will see that there are obvious damage on the screen: scratches, broken pixels and so on.

In addition to the monitor, we advise you to explore the system unit. Check if the video card is fixed in the corresponding socket of the motherboard, whether there is a voltage supply to all components of the PC. This should only be done if you have the skills to assemble / disassemble a computer / laptop.

Conflict resolution with video driver, if the computer does not start, a black screen is displayed

An example of a similar problem:

Installed Windows 7, 10, restored to factory settings (native Windows image). But nothing helps. Simply put, with Windows 10, the first inclusion is all buzzing and all is well, but as the drivers get on the video card (intel hd3000 and radeon 7600), a flicker and black screen occur, after which recovery and safe mode do not work. That is, Windows 10 dies, after installing the drivers a black screen.

If you think that the black screen problem may be related to the conflict of the video card drivers on the computer or laptop, then:

  1. In the safe boot menu, select "Enable low resolution video mode".
  2. After successfully logging into your operating system account through the device manager or Control Panel, remove the conflicting ATI / NVIDIA video driver.
  3. Restart your computer
  4. There may be a conflict between the drivers of the motherboard and the video card. You need to try different combinations of drivers. In order not to reinstall Windows each time during experiments, create a restore point and, when a black screen appears, roll back to the previous restore control point.
  5. If the OS boots in the normal mode correctly (the Desktop and the Windows cursor appear), then the black screen problem is really associated with incorrect behavior after installing the drivers. Go to the website of the video card manufacturer and download the latest version to your hard drive, try updating the driver again.
  6. If the black screen continues to appear, try the other solutions described in this guide. e.g. delete "harmful" programs.

We remove programs that conflict and block OS loading at startup

I do not start Windows 7. When I turn on the computer, after the words "launch windows" a black screen appears and then the computer does not boot. There is no cursor. I restart the computer, I am given a choice of how to boot Windows, I choose normal mode. and everything turns on, sometimes you need to reboot several times. Normally, it does not turn on at all, Ccleaner is, I use it, the antivirus is Avast, I do not update any drivers. What could be the problem?

In this case, the procedure for resolving the problem will be approximately the same as in the above case. The only thing that in the safe boot mode of Windows you need to specify "Enable Safe Mode". Next, in this boot mode, you need to go to the control panel and in the window "Programs and Features" Sort by application installation date. Analyze what you installed recently: it is possible that conflicting applications are the cause of the black screen and inadequate loading of Windows from the system drive on your computer. One of the best programs to uninstall applications. free CCleaner utility.

Monitor Turns Off When Booting Windows 7

Disable unnecessary programs and services from Windows startup

There is a wonderful msconfig utility, with its help you can speed up the loading of Windows. Although modern computers load the OS quickly, optimizing the download can remove the black screen for a few seconds.

  1. Start. Run. In the window, enter msconfig.
  2. Services tab. here you can disable unnecessary services.
  3. Startup tab. to enable / disable programs at boot.

In Windows 10, startup items can be disabled through the task manager (Startup tab). The status column displays the status of the application.

We use a recovery point to roll back the system on the computer and fix problems on the computer

It happens that it is impossible to identify the cause of the OS failure, uninstalling drivers and programs that cause conflicts does not help: anyway, when the computer boots up, a black screen appears.

What to do with the problem? Reinstall the operating system? If Windows is still loading when you turn on your computer, do not rush it "bury". For starters, we recommend that you try to roll back the Windows operating system using a recovery point (you can do this by booting in safe mode). For more information on how to roll back the system, read the link.

If the computer does not start. use the previous Windows restore point

Use boot disk (Live CD) to fix errors and diagnose black screen

When a black screen appears, it is advisable to check the computer, operating system for viruses. You can do this with "live cd". We recommend that you use the 4MRescueKit boot disk to enter system recovery mode. In addition to the actual virus scan, livecd 4MRescueKit includes modules for data recovery, file backup and a disk manager like PartitionMagic. Even if this does not help get rid of the black screen of death, you can at least get ready to reinstall the operating system or diagnose the hard drive in this mode. Live CD fixes problems regardless of version: it can be both Windows and Linux.

4MRescueKit Boot Kit Helps Eliminate Software Errors on a Disk

Black screen during the reinstallation of Windows

My black screen and cursor pops up, I reinstalled Windu and still I can’t reinstall it until the end. After the first reboot, during the installation process, when loading windows black screen and cursor.

Solution.

  1. Try using a different installation disk or version of Windows.
  2. The reason for the appearance of a black screen and interruption in the download can be either software or hardware. For example, the hard disk contains bad sectors or a usb flash drive or the disk from which Windows is installed is damaged.
  3. Try installing the operating system on a different partition on the hard drive.

Viruses corrupted Windows system files

Many computer viruses can remove or corrupt important system files. As a result, a black screen appears after loading Windows, although the cursor may be displayed and react to your movements. Not always removing viruses helps to solve the problem, but you can try.

How to check the hard drive for viruses if Windows does not boot? You need a working computer to which you can attach a hard drive. After booting under Windows, install the free Dr Web CureIt antivirus. The CureIt utility contains current virus databases.

Video instruction:

Select the hard drive to scan and run the scanner.

Video: Monitor Turns Off When Booting Windows 7


If, after detecting viruses, the black screen still appears when you start Windows, then you need to look for other reasons.

We write the recovery flash drive and reinstall Windows

After updating Windows 7. a black screen in any mode: normal, safe. no difference. I tried to restore Windows through the installation disk. to no avail.

Answer. Install Windows 7 from scratch or immediately install Windows 10, thereby killing two birds with one stone: upgrade and solve the black screen problem when loading Windows 7.

One of the most cardinal ways to bypass a black screen when loading. Reinstall a stable operating system. Once upon a time, to solve such problems, many of us used the installation CD / DVD disc (see above). After Window 7 came to the desktop PC market, the need for a disk drive gradually decreased, and today it is the most convenient way to install Windows. This is the creation of a bootable USB flash drive and recovery in boot mode from a usb drive. In general, read a practical guide on how to make a bootable windows 8 flash drive.

One of the best programs for writing Windows to a USB flash drive. Rufus. The utility is available in Russian, it is free and, as a rule, writes USB flash drives to install Windows.

The worst thing that can happen: a hard drive crashes

Summary. In this guide, I tried to recall and collect from the Internet the most complete list of problems that cause a black screen on the PC. The OS version doesn’t really matter, Windows 8, "ten" is it or generally outdated XP. If none of the methods helped, something is not clear or you have your own ways to solve this problem. please ask questions and add your ideas in the comments.

Answers to readers’ questions

I have a black screen after loading Windows, I tried everything, but nothing helps: I turn on the computer. black screen and nothing to do with it. The bottom line is that a black screen appears only after I update the driver on the video card. If you put the standard VGA, then everything starts and works fine.

Before that, I and Windu completely reinstalled and it all started somehow unexpectedly with "nothing". How to fix a black screen when loading windows?

Answer. One of the surest ways to resolve OS and driver conflicts on a computer is to go to the website of the manufacturer of your video card and download the latest drivers or stable ones, not in beta, to the disk. When downloading, make sure to indicate your operating system in the same bit capacity (32- or 64-bit). It is also possible that your video card is outdated and is not supported by modern operating systems, in particular, Windows 10.

If the laptop is black, try updating the driver

I have Windows 10 installed. An error occurred while trying to restore the OS from the system image. Now a black screen with a flickering cursor in the upper left corner when turned on. All I can do is turn on the computer and enter Bios.

Answer. If you see only a black screen and the cursor is a sure sign that the operating system cannot boot (you already understood the problem).

If the recovery console or the Windows 10 installation disk does not help to restore the OS to its original state or recovery point, create a bootable USB flash drive or a new disk to restore or install the operating system from scratch.

Not a single folder opened, I decided to start Windows System Restore. A black screen with a cursor appeared on the laptop when turning on / starting the Windows OS. I did everything according to your article, but the screen is still black. Help me please.

Answer. If, upon starting windows, a black screen appears even after recovery, it makes sense to reinstall the operating system on your laptop in another way. for example, in the boot mode of a USB flash drive or disk. Since, according to your description of the problem, the cursor still appears at boot time, this is a software error, not a hardware error.

An external box for formatting ext3 by PartitionMagic was connected via usb. After formatting was completed, the laptop restarted and there was no reboot, and a message appeared on the black screen: error loading operating system. The laptop no longer loads, does not respond to any keys. OS XP. how to be, almost everything is on it, there is a 2nd PC with Windows 10. In other words, the laptop is working. but the screen is black.

Answer. Fortunately, your laptop is dealing with a software failure, not a hardware failure. All you need to do is reinstall the Windows operating system. After that, the black screen of death will no longer make itself felt. If your laptop has a drive, use a boot disk to restore the OS. Otherwise, a bootable flash drive will help you, it is not difficult to record it, read the instructions on the link.

I have a black screen when I turn on the computer. Nothing appears on the monitor when I turn on the computer, and the system unit is working. I did one trick: I pulled out the power, pressed the power button for 5 seconds, released it, inserted the power cord, turned on the PC. everything worked fine. After 3 days, the same thing, but this trick does not work. I think that it is for the wrong shutdown. I turned off the last time when some of my programs were still running (I have Windows 7) and after loading the desktop does not appear. What to do if the computer has a black screen?

Answer. You need to approach the problem comprehensively: to figure out whether the motherboard and the power supply are working properly at all, whether all the wires are connected to those power connectors, whether the PC components are tightly connected to the jacks (for example, very often the “black screen of death” is connected with the wrong connection video cards). Perhaps the problem is still not hardware, but software (it’s just not clear from your question whether Windows boots). In this case, reinstalling from the boot disk or restoring in LiveCD mode will help.

Help understand what is with the PC. I have Windows 7. After the start of the launch, a black screen and cursor appear, after which it is suggested to select Windows 7 and the recommended download or normal. After clicking them, the download starts and throws it back into the same settings. The same problem with the download in safe mode. It offers nothing further, there is no window to enter explorer.exe.

Answer. If, while trying to boot Windows 7, a black screen and the cursor continues to appear, which mode you have not been selected. most likely, Windows system files have been deleted or changed. A clean reinstall of the OS or recovery from the Windows 7 boot disk will help. In the boot menu, select “System Restore” and then use the Bootrec.exe utility. Further actions are described here.

I have an AMD Radeon graphics card with 512 mb of memory, it did not pull new toys and I found on the Internet how to increase the memory of an integrated video card through bios. I changed some settings in the BIOS and installed 1 GB of memory, my pc rebooted and I looked at the characteristics of the video card and yes the memory actually increased. Then I started playing games, about an hour passed and my mouse started to hang up, turned on and off myself, and then it stopped working at all, I decided to restart the PC and after that on my monitor I saw just a black picture with some number in the corner. The computer refused to turn on, probably after half an hour clicks on the mouse and keyboard appeared on the screen "Welcome". The PC turned on, but the mouse did not work, I rebooted again. and again a very long black screen when you boot the computer. What can it be and how can I get rid of it?

Answer. That’s what overclocking a video card leads to. You need to go into the BIOS and reset to factory settings (set by default). Perhaps it is because of the BIOS settings that Windows does not start.

You are still lucky: with such overclocking of the video card, problems with the temperature of the video card can occur, up to the failure of one of the components (for example, the processor).

In general, it is not always possible to trust such overclocking instructions. Even if it contains the correct information, in the absence of proper skills, you can get not only a black screen, but also black smoke from the system unit :).

I don’t know after what started, maybe after defragmenting the hard disk, after updating the drivers, etc. Each time, before loading Windows, a black screen is displayed for 10 minutes and only after that a welcome window appears. The BIOS booted exactly at the beginning, pressed F2 to check the priority of the boot device in the BIOS. Also, during a black screen, the console carriage sometimes appears (bottom slash). What can cause a black screen when loading Windows?

Answer. In the BIOS, you can not only set the boot priority, but also disable unnecessary devices (for example, a drive). However, this will not save the situation.

Perhaps the reason lies in the fact that when you boot Windows is trying to find the right library or load a nonexistent component. Go to the startup menu and disable all unnecessary items. You can also disable unused Windows services through msconfig and remove unnecessary applications on your computer. In general, it is desirable to optimize the operation of the operating system and resolve conflicts.

You can also analyze the stages of loading Windows through the built-in tool "View event logs". This utility will show how much time it takes to load each process when the OS starts.

If time permits. reinstall the OS. On modern computers, reinstallation takes no more than half an hour, and this is a more rational way to solve the black screen problem than a long-term troubleshooting. Sooner or later, any Windows OS has problems.

I have Windows 7 on my computer. Everything was fine, but once after entering the bios password there was no Windows boot icon, and the monitor turned off (went into energy-saving mode), the f8 key does not work. I can’t go into bios, because the monitor does not work.

Answer. Try to reset the BIOS by removing the battery from the motherboard.

We go further. The energy-saving mode will not work immediately after starting the computer, rather the problem is associated with one of the components. Check the connection of the video card from the motherboard, the video card with the monitor, etc.

If everything is fine with the BIOS, and Windows 7 does not boot, reinstall the OS. Apparently, this is the easiest method to get rid of the black screen.

Windows 7 32bit was installed. After the change to Windows 7 64bit, a black screen began to appear. When connected to a TV, everything works, everything shows, everything is fine. But through the vga-monitor does not see and the screen is still black.

Answer. Perhaps, in the 64-bit version, drivers for the monitor or video card were not installed. Check on the manufacturer’s website if the monitor supports this OS. There is a suspicion that specifically your vga-monitor is not supported by this edition of Windows. Try booting Windows in safe mode or with the option "Enabling low resolution video mode (640 × 480)".

I am using VirtualBox. Installed Linux, worked on it, then turned off the virtual machine. When I tried to start, after loading, a black screen appears with a bottom underscore in the upper left. The laptop itself works, a virtual machine. not.

Answer. If the state is maintained on the virtual machine (Suspend), in principle, no problems should arise. If you turned off the virtual machine, then Linux tries to boot when it is turned on. Why a black screen with an underline appears after rebooting Linux is a separate issue. Check the key settings for the virtual machine. If the error persists, try installing Linux on Vmware Player.

I have such a problem. Windows 8.1 is installed, installed a third-party theme, decided to delete, deleted the entire themes folder from windows, although not all files could be deleted, well, okay, I rebooted the computer and after choosing the OS I have a black screen and, no, no, the cursor appears and disappears and bottom toolbar, tell me how to get rid of the black screen? There is no recovery point, no image either, well, no drive from the OS either.

Answer. If possible, search the Internet for a bootable USB Boot image, etc., write to a USB flash drive. Find the Themes folder on the Internet or on the disk and with administrator rights copy it to the previous place from where you deleted the files.

Without the installation disk, you can hardly get rid of the black screen in a different way.

When I turned on the computer, nothing appeared. the light indicates that the camera is working and the computer is turned on, but zero on the screen. What is the problem. RAM or hard disk? How to check?

Answer. To diagnose the problem, it is advisable to recall previous events. Did the computer show any symptoms of a breakdown (hard disk noise), did you delete system files on the disk, etc. This will help narrow down the list of possible causes. Next. trace at what stage the black screen appears. If the initialization of the equipment is successful, then it means the operating system. that is, Windows does not start. In this case, we recommend reinstalling the OS from a bootable USB flash drive or disk.

Good afternoon! In the evening, the computer crashed. In the morning I turned on the screen. you need to restore the device, error 0x00000e9. I tried to restore through the input and the F8 button, as indicated, there were no changes on the screen. Turned off the computer, already touched all the wires. I turned on the black screen, several times I turn it on and off, the black screen is unchanged. Now I put the Windows disk, the system unit buzzed, I heard that it was starting and still a black screen. What should I do next?

It was 8.1, everything just flew, the system was completely on ssd, then I had the urge to reinstall win 8.1 on win 10 after rearrangement, for a couple of days everything was fine, now when I start the screen is black and the cursor hangs 3-4 minutes after Windows slowly and with glitches but everything it starts

Windows does not load, constantly reboots when loading Windows, before that it shows a black screen and with inscriptions, I can’t enter the safe mode, I enter the BIOS, what should I do?

At startup, a black screen. The indicators are all on, I just tried to restart, it worked for the first time, but then again a black screen. Connected to a TV, everything worked well, what’s the problem?

My Windows 7 boots normally first. But if you turn off the computer and turn it on again not after 10 minutes, but earlier, then a black screen appears without a cursor. At the same time, the monitor light flashes, which, as I noticed, means that there will always be a black screen. But still after that, Windows 7 boots up. as evidenced by the welcome sound of Windows 7, but the screen still remains black and the cursor is not visible. To turn off, you have to press a button on the system unit. The video card drivers have been updated to the latest version from the manufacturer’s website. System recovery does not work. Viruses and malware removed. How can I remove a black screen?

During the installation of the AMD drivers, the brightness dropped sharply. Rebooted, the boot selection menu is turned on. When turned on normally, the brightness is very low, you can see something only with the help of a flashlight. The brightness is standard, and the screen is dark. OS Windows 7. Please tell me what to do.

I have Windows 8 installed at work. Well, a couple of small files. It opens the file for a long time. And generally it takes a long time to load. In another office on the computer, 8. also made a bootable USB flash drive on it. Can I restore my computer with it? When recovering on mine without a flash drive, it says that" some files are missing. Insert recovery disc".as I am only a user. I’m afraid to completely screw up the system. And this works fine and loads fine, only for a long time.

Hello, this situation happened. Lenovo tablet stopped working, I press the power button, the screen does not respond, but the backlight is visible. The screen was broken, but a year has passed since that case and everything worked well, and in the last few days the screen just went out, and in parts, but immediately reacted to switching on. What can it be and how can I fix it?