Is It Possible To Activate An Iphone Without A Sim Card

Activating iPhone 4 with and without a SIM card

The procedure is not very complicated and, with minimal skills in working with touch gadgets, a person will cope with it in a few minutes. Especially if he already had an iPhone and just changed 4 to 4S (this order is not required). Activation came to Apple devices with the advent of iOS 5, before it was not. This is due to the active appearance of many Chinese fakes, which outwardly practically do not differ from the iPhone 4S or 4.

But if at the first start with or without a SIM card the phone cannot register itself, this is the main reason for complaints to the supplier. In other cases, you have to activate, which depends, again, on the presence of a SIM card.

How to activate iPhone 4 / 4s with a SIM card

Is It Possible To Activate An Iphone Without A Sim Card

When you unpack the gadget, the first thing you need to do is put your SIM card into it. The iPhones 4 and 4S use a micro-SIM, which is inserted into the corresponding slot. You take a paper clip, open your pocket and place your SIM there, and then close the pocket (don’t lock it if the SIM card is in the wrong position!). If the map is positioned incorrectly, you will definitely notice it in the future.

When everything is ready, you need to turn on the iPhone by holding the power button for a few seconds. The process will begin, during which you can register the iPhone for further fruitful work.

First, the Menu will ask you to select the language of work and the country of residence. After that, you have to decide whether you need the “Geolocation Activation” service on the iPhone, which is usually responsible for the navigation and use of maps. This setting does not have to be set right now: you can activate the service later.

Wi-Fi activation

Now the process itself begins: you need to choose the network through which you will activate the iPhone 4 or 4S. It can be a mobile Internet or a wi-fi access point, but there is one caveat: through the Internet, which is distributed from another iPhone, the gadget cannot be registered. If you have chosen a normal access point. The smartphone is quickly activated.

In the process, you will be prompted to choose the status of the iPhone. There are only three options:

  • Use 4S (or 4) as a new smartphone;
  • Recover his data from iCloud;
  • Recover his data from iTunes.

In our case, we need to activate the new iPhone 4S. To do this, select the first menu item and proceed with further steps. First, you create and activate your Apple ID. A unique identifier for each Apple device owner. Then you accept the terms of the license agreement for the use of iPhone 4S or 4.

This completes the activation. All that remains is to configure the work of services, including “Find My iPhone”, which is responsible for finding missing gadgets. You can skip this point and then your iPhone 4 or 4S will be activated.

Activating iPhone 4 / 4s without SIM card

  • If you received a gadget as a gift from China, then it is probably unofficial. In this case, activating the iPhone will not be so easy, but real. To do this, you will have to jailbreak the corresponding iOS version and install Cydia on the iPhone. It has a special tweak. Subscriber Artificial Module, which allows you to “activate” the gadget for the Apple system.

Otherwise, it simply does not activate: such a fate awaits all Chinese Apple smartphones. The mechanism is extremely simple: a jailbreak is put, then an emergency call is made (immediately reset). After that, the green bar moves from the top, the smartphone connects to wi-fi and is activated via Cydia. For this, the repo.Bingner.com repository is added, where, in order to activate, the same SAM and SAMPrefs tweak is installed. After that, the device can be safely rebooted and it is activated in the usual way through iTunes.

A lot ofs have been filmed on this topic, which explain in detail the activation process:

Do not forget to read the comments, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later comments, then the answer to your question is contained in the article, respect someone else’s time.

Activating iPhone over a cellular network

    If your SIM card has 3G or LTE (mobile data) cellular data service enabled, simply insert the card into your iPhone to activate.

The phone will contact Apple’s activation server, which will check the status of your device and allow it to be activated. After that, the logo of your operator will appear in the status bar on the iPhone screen.

If mobile Internet is not connected or unavailable, activate iPhone via Wi-Fi.

All possible ways to activate iPhone

Information for beginners and curious.

First of all, the iPhone is a mobile phone with which you can make and receive calls over the cellular network (GSM), as well as send SMS messages and USSD requests. And only then, this is a smartphone with all the functions that follow from its definition.

In order for your iPhone to register with the operator’s cellular network, it must be activated.

What is iPhone Activation

How to activate iPhone

This can be done in 3 ways:

Use cellular

  • Wi-Fi
  • Via iTunes
  • How to activate iPhone without SIM card

    In the intermediate versions of iOS 7.0-7.0.6, there was a vulnerability that allowed activating an iPhone without a SIM card using an emergency call to 112. In the final iOS 7.1.2 and newer generations of iOS, the hole was closed.

    As you can see, to activate an “unlocked” iPhone, you only need to connect it to the Internet, the rest of the device will be done by itself. In most cases, this does not pose a problem, but if you have an exceptional case, write in the comments, we will try to help you.

    How to Activate iPhone with iTunes

    Insert SIM card into device and turn it on.

  • Swipe from left to right across the screen anywhere.
  • Select Language and Country.

    Click on “Connect to iTunes”.

    Wait while the program recognizes your device and contacts Apple’s activation server. Upon activation, you will see a message: “Congratulations, iPhone is unlocked”.

    As you may have noticed, in all the described methods, in the iPhone, first of all, you need to insert a SIM card. Question: can I activate it without a SIM card?

    Method 1. Activate iPhone with an emergency call

    Assumes turning on the iPhone, and when a greeting appears on the display, sequential pressing of the Home and Emergency buttons. Then enter “112” and start the call. After that, quickly press the shutdown button. Then “Cancel”. After the end of the call, the gadget will perform all its functions and work normally. This means that you have successfully activated your phone and can now control your phone.

    The efficiency of the first one has not been tested by us, but you can try it. It definitely won’t get any worse.

    How to activate iPhone without a SIM card

    When we receive a new iPhone, the first thing we have to do is activate the iPhone so that we can use it. And as a rule, we have to turn on the mobile phone with a SIM card. However, what if you don’t have a SIM card when you want to activate your device? Does this mean that there is nothing you can do at this moment? Absolutely not! Even if you don’t have a SIM card, you can still activate your iPhone easily.

    If you would like information on how to activate iPhone without SIM card, you can read and go to the details below to try.

    Method 2. Activating iPhone without a SIM card

    Step 1. Using the iTunes utility for Windows or OS X. First, you need to download the latest version of iTunes and connect your iPhone to your computer.

    Step 2. Once you have established a connection between iPhone and iTunes, you may receive a message stating that the iPhone you are trying to activate does not have a SIM card installed. If you get this information, you still need a SIM card to unlock your phone as the device is locked to some network carrier. But if the message does not appear, you can proceed with activating your phone.

    Step 3. Next, you need to select “Set up like a new iPhone” and click “Continue” on your device. After that, iPhone activation will start in iTunes.

    When the process is complete, you need to configure some settings on your iPhone, including location, password, app and data, Apple ID, etc.

    Step 4. After all the settings are done, your iPhone will be activated successfully. Finally, you just need to click “Start” to manage your new device.

    3 ways to activate iPhone X / 8/7/6/5 without sim card

    Method 3. Activating iPhone via Tenorshare 4uKey utility

    Tenorshare 4uKey. Is an iPhone activation and unlocking tool that allows you to activate and unlock your iPhone without a SIM card. This is the most effective and easiest way to activate iPhone X / 8 / 8Plus / 7 / 7Plus / 6s / 6 / 5s.

    Download and install the software on your PC / Mac before we start.

    Step 1. Run the program and connect iPhone / iPad to computer via USB cable.

    Step 2. After the program recognizes your device, you can press “Start” to activate the iPhone.

    Step 3. Before activating iPhone passcode, download the latest iOS firmware over the Internet.

    Step 4. When the software is downloaded to your computer, you can click “Start Unlock” to start iPhone recovery.

    Step 5. The whole process takes a few minutes. Please keep your device connected to the system recovery process.

    Step 6.You can set up your iPhone as new, Touch ID and Face ID.

    After all, if you forgot your iPhone / iPad password, or accidentally entered the wrong password too many times iPhone is disconnected connect to iTunes, you can use Tenorshare 4uKey to unlock iPhone in minutes.

    Update 2020-02-12 / Update for iPhone Problems and Solutions

    Activation using iTunes

    To activate an iPhone without a SIM card in the first way, you need:

    Go to the official iTunes page from your computer, download the program in the newest version;

  • Connect iPhone to PC via USB cable;
  • Launch iTunes;
  • Follow the instructions to complete all activation steps.
  • How to activate iPhone without SIM card

    Reading time: 1 minute

    The need to activate iPhone is driven by a demand to reduce the risk of making fake devices. If the device did not pass the activation, the owner of the gadget will not be able to register with your telecom operator.

    Activating iPhone without using a SIM card is done in two available ways:

    Via PC and iTunes software;

  • Activation without a PC only using an iPhone.
  • Using the device itself

    The second way to activate iPhone without a SIM card is even easier and less time consuming.

    Without a computer, activation can be done in the following way:

    Press the “Home” button when the welcome screen opens;

  • Use an electronic call, dial 112, press the appropriate button to make a call;
  • Press “Power” to immediately cancel this action.
  • As soon as the call is completed, the device will be fully activated, including almost all of its functionality.

    In case of accidental blocking of the gadget, depending on the reason, you need to use one of the following methods:

    • If the iPhone search function was not turned off when locked during the firmware. You can reanimate the device, return it to its normal state, only by contacting Apple technical support. To do this, you need to be the owner of an iPhone, have documents for it, even a check for its purchase.
    • If by chance there was a check mark next to “Stolen” on the iPhone. Only the owner of the device can help restore life to the device in this case, with documents on the device confirming that the phone was not stolen. No other options will help.

    When there is a SIM card, but it does not fit in size, one of the above options will come in handy for activating the smartphone without problems.

    Activating iPhone with a sim card

    1. Unpack the gadget and insert nano-sim into special compartments. If you have a micro SIM, you can read the method “how to make a nano-SIM from a micro-SIM”;
    2. Turn on the smartphone, to do this, press and hold the power button for about 3-4 seconds, it is located on top of the smartphone;
    3. After the inclusion occurs, select the country of residence and the language used;

    4. Next, select to enable or disable the geolocation service, this is necessary for the operation of applications such as navigator, maps, etc. Note that you can refuse from this and carry out an independent setting in the “Settings” menu;

    5. Then we connect to an available WiFi network or use the mobile Internet of our operator. Important: if the Internet is shared from another mobile tablet or smartphone, activation will not be completed correctly;

    6. We are waiting for the completion of activation and initial configuration;

    7. About the end of the process will be offered three options:

    A) Use as a new device;

    B) Recover from iCloud;

    C) Recover from iTunes.

    8. For new gadgets, option A is acceptable, if you previously had Apple devices, then select the appropriate option for restoring settings. Next, we will consider option A;

    9. Create your Apple ID and accept the terms of the license agreement;

    10. The last step remains: here we will be offered to enable services such as “iCloud”, “Password protection”
    And “Find your iPhone” and will also offer to send diagnostic data about the device to the developer, all this you choose at your discretion;

    11. The whole device is activated, you can safely use it.

    How to activate iPhone with and without SIM card

    The very first question after buying a brand new iPhone 5S or lower model, the first question arises after enabling “How to carry out the activation procedure?” Aplle is very careful about its devices and wants to minimize the risk of the user getting a counterfeit, which is why an activation procedure was introduced. We will describe in detail every step that needs to be taken to get the iPhone fully functional.

    In our article, we will consider two methods of activation with and without a SIM card, since very often owners of unofficial gadgets are interested in this.

    Activating iPhone without a SIM card

    It is very important, this is a rather dangerous method that can confirm your gadget for it you first need to jailbreak iOS 7 (latest version) and install Cydia.

    This question will be relevant to the owner of unofficial smartphones. To do this, you need to have the SAM (Subscriber Artificial Module) tweak, which is available in Cydia. This tweak will do all the necessary work and your gadget will be, as it were, “officially” activated.

    1. After jailbreak, go to the welcome screen;
    2. Dial 112;
    3. Press the power button and click on cancel;
    4. Above you will see a green bar, on which we tap and do a reset;
    5. Connect to WiFi and launch Cydia, add the following repository repo.Bingner.com;
    6. Install SAM and SAMPrefs;
    7. We reboot the device and carry out its activation through iTunes.

    Below is a tutorial “How to activate iPhone”

    How to use iPhone without a SIM card?

    As you know, to start using the iPhone, you need two things:

    • Sim card;
    • Working Wi-Fi network.

    It is the presence of these two parameters that distinguishes the iPhone from the usual iPod. Without an active card of the mobile operator, the user will not be able to continue working with the device. Let’s take a closer look at how to get around this limitation and activate iPhone without SIM.

    You may need to turn on the iPhone without a SIM card at the stage of buying a phone, when you need to check its performance, but there is no time to rearrange cards from other devices. Also, bypassing the restriction will be simply necessary if your operator’s SIM card is not suitable for Apple gadgets.

    All the methods presented below are official and legal options for unlocking phone functions without connecting to a cellular operator’s network.

    How to use iPhone without a SIM card. 2 ways

    Method 1- Using iTunes

    This option of unlocking phone functions requires the use of the desktop version of iTunes. The application can be installed on any computer running Windows or Mac OS.

    We recommend that you ensure that the latest iTunes update is preinstalled on your PC. This will get rid of possible errors and bugs at the configuration stage. Follow the instructions to use Athos without a SIM card:

    • Launch iTunes on your computer and wait for its main window to load;
    • Then connect the mobile device to the PC using the charging cable;
    • A message about the new device should appear in the program window, and in the upper left part of the window you will see the icon of the used phone model;
    • After the program recognizes the smartphone, you will see the settings window for the new device. Follow all the prompts to unlock your phone.

    Itunes will not check if the mobile carrier card is installed in the phone. Iphone will activate automatically and you can use the gadget without any restrictions. The only caveat is that work with GPS networks and mobile Internet will be unavailable, since the gadget is not tied to a mobile operator. You can fix the situation by inserting a work card into the sim tray.

    Method 2. Turn on the phone quickly

    You can bypass the limitation without using third-party programs. You only need a smartphone. You can activate its work without a cellular operator card or connecting to a working Wi-Fi network. Follow the instructions:

    • Take the included iPhone and press the “Power” key;
    • Wait for the Apple logo to appear and the mobile device starts to turn on;
    • Immediately after the “welcome message” appears on the display, press the “Home” button;
    • The “Emergency Call” screen appears. In the field for dialing the number, type the combination “112” and click on the “Call number” label;
    • When the call starts, press the “Power” key. A window will appear indicating the absence of a SIM card. In it, click on the “Cancel” field.

    The call ends and the display shows the iPhone desktop window. You can now use your phone without connecting to a cellular operator. Also, there will be no need to enter the data of the router’s network.

    This method is supported by the following iPhone models:

    • All iPhone 7 line;
    • Sixth generation iPhone;
    • Iphone 5c, 5s;
    • Iphone 4, 4C.

    Activation without SIM

    At the first start, the iPhone will ask you to create an Apple ID and carry out the initial setup, in the process it will be activated. For this, the network of the mobile operator is used and, preferably, the procedure should be carried out in a place with good coverage. But what if there is no coverage or no Internet access? To activate an iPhone without an inserted SIM card, you need to start the device and hold down the “Home” button at the bottom of the case.

    The emergency call menu will be displayed. We enter the number of the soon response service, for example “112” and call them. Drop the call immediately. After these steps, you will have a ready-to-use iPhone with full access to functions. But, for some programs to work, you need the Internet and an Apple account. Need to urgently find an address on a map? Download the best navigator in the material: “Yandex.Maps for iPhone”

    Is it possible to activate an iPhone without a SIM card

    When buying mobile phones from Apple, not everyone knows that it needs to be activated before using it. This becomes a real problem if the SIM card does not fit in the format or has been lost. In the article, we will consider how to activate an iPhone without a SIM card.

    Using special utilities

    How to set up an iPhone without a SIM card and bought in another country? You will need a Windows or Mac OS computer and a USB cable.

    Let’s consider how to activate an iPhone via iTunes without a SIM card. Download the application from the official Apple website and install it on your computer. Installation will not take long and supports Russian.

    We launch the application. You will need a registered Apple ID account to work. We enter it using the personal data specified during registration.

    We connect the smartphone to a laptop or computer via a cable. We follow the simple instructions shown on the screen and get access to the mobile. Is your smartphone running out of space? We recommend using one of the cleaners presented in the article: “Analogs of CCleanner for iOS”

    TURBION.NET 2021