iPhone is dead and won’t charge

How to turn your iPhone on when it is completely discharged

There are several ways to turn on your iPhone if it is completely discharged and isn’t working. Black screen, “lifelessness” of the device in this case is explained not only by a dead battery, but also by a software failure. Let’s take a closer look at both options.

Here we are not revealing America, but simply connect the iPhone to the power adapter for 15-30 minutes. After a short power-up we are trying to activate iPhone, leaving the charger cable plugged into the outlet. An empty battery with a lightning bolt inside will appear on the display. This means that the device is fine and in the process of charging. As soon as it gets the necessary energy, it will start working right away:

With the image of an empty battery, a socket and an arrow pointing at a lightning bolt, the iPhone owner takes the information that the battery is used up completely or the device has not been used for a long time, and therefore needs a 4-5-hour recharge. Then the gadget activates.

What to do if the iPhone X/8/8 Plus is dead and does not turn on?

So, the first thing to do is to find the reason why your iPhone 8 Plus/8/X/7 Plus/7/SE/6s/6/5s/5 mobile device does not turn on. To do this, you need to connect it to a charger and wait for some time. Usually after 10-15 minutes, the phone lights up as soon as it gets the minimum battery charge. If the iPhone has been lying in a discharged state for a very long time over several days, then it will take longer for the battery logo to light up. If this did not happen and your iPhone still does not turn on, then there was a software glitch that caused it.

To fix the system error, you can use the free program Tenorshare ReiBoot, which solves this and some other problems by entering and entering recovery mode. A detailed description of what to do if your iPhone runs out of power and won’t turn on, below:

Download Tenorshare ReiBoot from the official Tenorshare website. Install it to your computer and then run.

Connect your iPhone that won’t turn on to your PC with a USB cable. The program recognizes your device.

Now click on the “Enter recovery mode” button. The device will enter recovery mode. the iTunes logo and USB cable will light up on the screen.

When the “Exit recovery mode” button becomes active, click on it. The device will be restarted. After restarting, your iPhone will be ready to work in stable mode. The software failure will be fixed!

iphone 5s is flat and won't turn on

Tenorshare ReiBoot can help you not only if your iPhone 8 is dead and won’t turn on. This tool can solve other common problems with iOS devices: after updating iOS 11, iPhone hangs on apple logo, iPhone hangs on black screen, blue screen of death, phone restarts constantly, iPhone screen does not respond to user’s touch and others.

Tenorshare ReiBoot can be installed on Windows or Mac. The program is available for free download.

See also  How to restore Viber's remote messages on iPhone

If you have iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone SE (2020), iPhone 11, iPhone 11, iPhone 11 Pro Max, iPhone 12, iPhone 12 mini, iPhone 12 Pro Max, iPhone 13, iPhone 13 mini, iPhone 13 Pro or iPhone 13 Pro Max

Press and quickly release the volume up button. Press and quickly release the volume down button. Then press and hold the side button until the Apple logo appears.

Software failure

Sometimes the iPhone shutdown problem is due to a software failure (improperly installed applications, software incompatibility, and so on). This problem can be solved with a deep reboot of the device, and the method of rebooting depends on the version of the smartphone:

  • If you are using iPhone version 6 or lower, in such a situation, hold down the Home and Power buttons for 15-20 seconds to reboot.
  • Version 7 devices restart like this. to reboot press Home button and volume “-” button for 15-20 seconds.
  • Version 8 and later smartphones reboot in a slightly different way. press the volume button “” for a few seconds, then press the volume “-” button also for a few seconds, then press the side Home button for 15-20 seconds.

Repair for iPhone

The main thing is not to panic and do not try to disassemble the device. First, check if the charger works by connecting it to another smartphone. If the device charges normally, then it is probably time to replace the battery on the iPhone. This can only be done in the service workshop, as the Apple smartphone is not demountable.

If the battery icon appears on the screen when you connect the charger, but the gadget does not charge or turn on, it may be due to an iOS hang-up. It happens when the battery is deeply discharged. To solve this problem, put the device on a charge for 6-8 hours and then try to turn it on. When the smartphone successfully starts up, observe how long it holds battery power.

Another way to power on your iPhone is to restore it via DFU mode. To do this you need to connect the phone to your computer, go to iTunes and press the “Repair” button. In most cases this procedure helps to turn on the device.

If all the above methods have not helped, go to the service center for diagnostics. At rem-iPhone centers, diagnosis is free of charge.

iPhone does not charge. hardware reasons

The reasons why iPhone does not charge, but shows that it is charging is as follows:

  • Damaged (broken) cable. If your cable has been damaged (physical damage, animals, children, etc.) then you will not be able to charge your iPhone, and in some cases, although you will see signs of charging, but de facto it will not happen;
  • Broken charging port (Lightning). Usually caused by physical wear and tear, as well as strong (sudden) movements of the user when connecting-disconnecting the cable;
  • Dirt clogging the port. In the process of long-term use of the phone, staying it on various nap (dirty) surfaces, the jack can get clogged with small pieces of hair, dirt, dust and other things, which leads to insufficient contact between the cable plug and the port;
  • Problem with the charger. Your device for some reason (physical wear and tear or incomplete compliance with the declared characteristics) does not give the declared charging parameters (usually 5V and 1A), and this leads to various problems with charging your smartphone. This is especially the case with devices from little-known manufacturers (so-called “noname”);
  • Problem with the battery (usually worn out). Over time, the battery is reaching the end of its life and must be replaced. If you have been using your iPhone for a long time, or bought it from hand, then it is likely that the battery of your device has exhausted its life;
  • Physical damage to the phone’s board. If your phone has been physically damaged, dropped, or experienced any other mechanical effects, then it is possible that they have negatively affected its functionality, including its ability to charge;
  • Problems with the controller that charges the phone.
See also  The plus button on the iPhone does not work

It is completely discharged and doesn’t want to turn on when the charger is connected

This problem may occur when there are physically intact components, the charger is broken or the charging cable is damaged. You’ll need to find and use a working charger.

It happens that the charger charges the iPhone up to 60%, and then the process stops. Over time the cable can lose contact and won’t be able to carry the current. So you should only use the original power adapters, and purchased Chinese fakes can get hot and melt during operation. This applies to car chargers (12V) and home chargers (220V).

If the iPhone was charged with cheap Chinese adapters, it is possible that the charging controller or power controller is broken. In this situation the battery will not be able to physically take a charge because the microcontroller that controls the charger will not give the necessary commands. It is difficult to do anything on your own, so you should apply to a service center.

If you use a Power Bank to charge your iPhone, the output current should be 1A. It is important to use the original Apple wires, as the cross section in the universal mobile battery may be too thin, which reduces the current and voltage.

iPhone (iPad) runs out of power quickly? Eliminate the cause in 1 minute!

Regardless of the iOS version, users have always found themselves in a situation where the iPhone quickly runs out of power. And this problem occurs quite a lot of people, but not many people pay attention to it at once.

In this article I will tell you how to get rid of this nuisance and return the battery of your iPhone “former endurance. By the way, the information in this article also applies to iPad tablets.

In my case I accidentally noticed that the percentage on the remaining charge counter began to fade somehow unnaturally fast. I even experimented by charging my iPhone to 100% and then leaving it to snooze on the table overnight.

And what do you think?? Unfortunately my experiments confirmed my fears. the iPhone was indeed draining abnormally fast.

Overnight (in about 7 hours) I lost more than 20% of the battery charge. This is assuming that the phone was not used at all and was in a low power mode. It was just a disaster! What to do?

There is an unscheduled repair of the iPhone or the problem is in the software? A whole bunch of questions swarmed in my head, with which I turned to the Internet. And here’s what I was able to find.

The thing is that somewhere in the “depths of iOS” there may be a conflict that partially crashes one of the applications, which in turn begins to intensively “feed on energy”.

See also  How to create a link on your iPhone

Т.е. Everything seems to be fine, and you are using your phone as usual, but at one point it starts “devouring” charged lithium ions at an incredible rate.

And notice that all these things happen for no apparent reason, regardless of the version of iOS and the model of your iPhone. My iPhone suddenly started running out of power quickly and on 5.1.1, and on iOS 6.1.3, and on iOS 7.0.6. Recently the iOS 7 firmware came out.1. I think there will be similar flaws with this one too.

By now you might be asking, “So what do you do when your iPhone runs out of power quickly?”. The answer is always one. “Follow the instructions below.”

If your iPhone began to run out quickly, you need to clear the contents of RAM (close all applications) and reload the device hard.

And now, for those who do not understand what to do:

STEP 1. Close all the open apps on your iPhone. To do this, double-click on the Home button bring up the multitasking panel, where you close all the applications by swiping the icons up.

Warning! Close absolutely all applications. You should only have your home screen.

STEP 2. Hardly overloading your iPhone. Press Home button (the round button under the screen) and Power button (on top of the phone) at the same time. Hold it down until the screen goes out (about 7 seconds).

If the method above has not helped, it is possible that the problem is with the hardware (battery or charge controller). The articles at the links below will help you figure it out.

That’s all you need to do. The whole procedure takes exactly one minute. Now your iPhone will sit overnight and will not discharge more than 3% of its power. Checked!

Do this procedure at least once every three months And don’t forget that the batteries and rechargeable batteries of any device are consumables, t.е. Losing their properties over time and need to be replaced.

If this article was useful to you. share it with your friends on social networks. Don’t let their iPhones run out of power so fast either.

Performing a hard reset

In case the iPhone doesn’t fully charge, the culprit could be a software glitch. To eliminate it, you will have to reboot your smartphone.

Press and release the volume up button.

Press and release the volume down button.

Press and hold the lock screen button.

Once you see the Apple logo on your display, release the.

I must say that this method of rebooting is only available for relatively new models, starting with iPhone 8 and all subsequent ones. And here’s what to do on older models:

  • If you have an iPhone 7, iPhone 7 Plus or 7th generation iPod touch, you’ll need to press and hold the lock screen button and volume down key until the Apple logo appears on the display.
  • If you have an iPhone 6s or earlier models, you must press and hold down the lock screen button along with the Home button until the Apple logo appears on the display.
Denial of responsibility | Contacts |RSS | SE | EN | BR | DE