Iphone Freezes

Iphone 8 or X won’t turn on or freezes on apple. What to do?

Iphone Freezes

Many of us are well aware of how to deal with problems that may arise with the long-familiar iPhone. However, Apple has changed a lot in the iPhone 8, iPhone 8 Plus and iPhone X.

In this article, we will try to figure out what to do if your iPhone 8, iPhone 8 Plus or iPhone X does not respond to actions, does not turn on at all, freezes on an apple.

Smartphone freezes on apple while loading

It happens that the iPhone seems to start, but its loading stops at the Apple logo. An apple. But this mostly happens on test firmware and other risky manipulations.

First. Connect your device to your computer and open iTunes.

Second. When the device is connected, perform a forced reboot.

  • On iPhone 8, 8 Plus, X, press and release the volume up button, then press and release the volume down button. And at the end, press and hold the power button until the Apple logo.
  • If you are using an iPhone 7 or 7 Plus, press and hold the Power and Volume Down buttons for ten seconds or longer until the Apple logo.
  • If you are using an iPhone 6s, 6s Plus, or older, press and hold the Home and Power buttons at the same time for ten seconds or longer until the Apple logo.

Never release the buttons described above when the apple appears. The Apple logo. Keep holding them until the recovery screen starts. Let go and exhale.

Third. Select “Update” when prompted to perform a repair or update. Itunes will try to reinstall iOS without erasing your personal data.

Itunes will first download a fresh copy of iOS for the device. You just have to wait until the procedure is completed or try to perform it again if something goes wrong.

Device does not start after restart

If your iPhone 8, iPhone 8 Plus, or iPhone X still won’t turn on after the forced restart procedure, it may be dead. Yes, you didn’t even notice it.

In this case, connect the device to a wired charger (this is preferable) or put it on a wireless station and leave it for an hour. In a couple of minutes this will appear:

If the charging screen does not appear for an hour, or if a screen for connecting to a power source appears, do not despair. Just check the connector, USB cable and power adapter.

First, make sure 100% that all connectors are securely connected and not damaged or clogged with dirt. Try a different cable or power adapter. If it is dull. To the service.

Please note that in winter the battery can run out very quickly due to low temperatures. Over, it may not provide the required power, and the device will simply turn off.

Of course, everything written above is also true for the iPhone 7 and below. There are simply no nuances other than the lack of support for wireless charging in this case.

The device does not respond at all

If your iPhone 8, iPhone 8 Plus or iPhone X does not respond at all to your actions, it just freezes and shows a static picture or just a dark screen, you need to restart.

In this case, you should not lose any data that you worked on if the corresponding software has an autosave function. And iPhone will definitely not reset.

On iPhone 8, 8 Plus, X, press and release the volume up button, then press and release the volume down button. And at the end, press and hold the power button until the Apple logo.

If you are using an iPhone 7 or 7 Plus, press and hold the Power and Volume Down buttons for ten seconds or longer until the Apple logo.

If you are using an iPhone 6s, 6s Plus, or older, press and hold the Home and Power buttons at the same time for ten seconds or longer until the Apple logo.

What to do if all else fails

As a result, after all the procedures described above, you should see the familiar lock screen of your iPhone 8, iPhone 8 Plus, iPhone X or an older iPhone that you are so used to:

However, in rare cases, you may not succeed. Yes, this happens sometimes with the iPhone. And there are plenty of reasons for this outcome:

  • There is something wrong with the display if it remains dark, but you hear alerts and feel vibration.
  • There is something wrong with the display if it stays black, but you hear a beep when you plug your iPhone into a charger.
  • There is something wrong with the touch, if the display works, but does not respond to your gentle and not strong pressing.
  • What’s wrong with the buttons if you can’t force restart the device or even just press them to do so.
  • Something is just wrong if the device stuck on the screen with an apple and is not recognized by iTunes.

As a result, you need to go to the service. But his choice is a topic for a separate material. Better, of course, in the official one, but it is long and expensive. Unofficial, but dangerous for iPhone.

Official decision from Apple

Step 1. Connect your iPhone or iPad to your computer using a USB cable. Launch iTunes.

  • Step 2. Click on your device in the iTunes window. If the device is not recognized in iTunes, hard restart the device (hold down the Home Power buttons for 10 seconds).
  • Step 3. Restore the device from the last backup made before the update to iOS 9. If you don’t have any backup, make it now and then restore the device from it.
  • This method may sound absurd, but it works (albeit not 100% of the time). Creating a backup copy of a frozen device and then restoring it from this “buggy” copy somehow miraculously resets the error and the iPhone successfully completes the update to iOS 9.

    A little later, the Cupertinians rolled out another “solution”. If after the steps above, your iPhone still gets to the “Slide to Update” screen, you need to restore your device to factory settings.

    To do this, connect your iPhone to your computer via USB. Launch iTunes, click on your device, and then click on the Restore iPhone. Button.

    There is one problem at the moment. If Find iPhone was activated on a frozen iPhone, it is most likely that it will not be easy to restore the device.

    You will not be able to turn off Find My iPhone because the device is in a state of stupor. Removing the iPhone from the list of devices on iCloud.com won’t save the day either. If this is your case, go to the next method (see below).

    Iphone stuck at the “Slide to Update” screen [Solution]

    The long-awaited update to iOS 9 brought more headaches and gray hair to users than new features and faster devices. The Internet is teeming with discussions about the problem that arises during the upgrade to iOS 9.

    For users, the situation arises when the iPhone freezes on the “Slide to Upgrade” screen and the installation of the new version of iOS stops. Today we will look at several solutions to this problem while trying not to lose data from your iPhone.

    Custom working solution

    I don’t know about Apple, but if a puncture of such a grandiose scale happened in any other company, then the person responsible for the development of iOS would receive a real “magic pendel”.

    This bug has affected a large number of people around the world. An attempt to upgrade to iOS 9, irrevocably took away millions of contact information and other personal information of iPhone and iPad users.

    If you are not interested in losing all the data stored on your iPhone, use the method found through trial and error by Internet users. Here is the solution itself:

    Step 1. Download the latest beta version of iOS for your device. Unpack the downloaded zip archive on your computer hard drive.

  • Step 2. Connect your iOS device to your computer using a cable. Launch iTunes on your computer. Click on the device image in the top line of the window.
  • Step 3. Hold down the SHIFT button on the keyboard (the Alt / Option button on the MAC) and click on Update in the iTunes window. In the window that opens, select the downloaded firmware file in the.Ipsw format (earlier you downloaded the zip archive. Did you forget to unpack it?)
  • Step 4. The latest iOS beta will be installed on the device. You should now be able to back up and disable Find My iPhone.
  • Step 5. Now you have to make a choice: roll back to the previous possible firmware. Read about it here, or stay on the latest beta version of iOS. Then you need to complete STEP 6.
  • Step 6. If you decide to stay on the iOS beta, you need to take part in the Apple Beta Program. You can do this by clicking on this link.
  • Thanks to user Gavich, who suggested the following in the comments:

    For those who have a password set, and when connected to iTunes, it says “to allow access, answer on the iPad itself”, but on the device except “slide to update” there is nothing, the steps are as follows:

    We disconnect the cable from the device, but we do not remove it far, we do not pull it out of the computer

  • We press the Home and Power buttons until the screen goes out
  • We release the buttons and immediately hold down and hold Home again, plug in the cable (without releasing the buttons) until the iTunes icon with the connector image appears on the device screen, signaling that the device is booted in recovery mode
  • After that, your device will be visible on your computer in iTunes, and then. According to the points below. If you want. Renew, if you want. Restore.
  • Participation in the beta testing program does not oblige you to anything, but it gives you the right to use beta versions of iOS firmware for an unlimited amount of time. Subscription is completely free.

    Just follow the link above using your iPhone and follow the onscreen instructions. If you do not sign up for the beta testing, your phone or tablet will be blocked after a while.

    Summarizing. The problem with the “Slide to Update” screen still exists. Unless you have a compelling reason, I wouldn’t advise you to upgrade to iOS 9. Especially on the iPhone 4S.

    Personally, I realized that the last possible update for the iPhone 4S will not bring any noticeable acceleration, but quite the opposite. Apple has already announced that iOS 9.1 update will fix a bug with freezing iOS devices.

    When this update is officially released to all users, you can unsubscribe from beta testing and live like a “complete human being”.

    Why iPhone freezes on apple

    Turning on the iPhone directly depends on the sequence of actions performed within the system, and in order to successfully start the phone, these actions must be performed in a specific sequence. There is a possibility that the gadget simply cannot connect to the processor.

    There are three reasons why the device begins to behave in this way:

    • Frauds related to the cores of the device. This includes a failed software update, transferring information from a computer, and a faulty cable or USB port may also be to blame.
    • If you made a jailbreak, it is rather the reason why you cannot start the phone normally. If an iPhone is jailbroken, it automatically becomes vulnerable to viruses.
    • Defective component parts. At startup, the phone first of all sends signals to the hardware parts and if they are faulty, the phone will not start without them, respectively, the logo will continue to burn.

    Iphone freezes on apple

    If the iPhone freezes on an apple, then this does not bode well. This error indicates that the device cannot cope with the error that occurred in the system on its own. The phone will have to be restored, but here’s how. It is written below.

    How to solve the problem with a frozen apple on the screen

    Force reboot. The decision to reboot the device is effective and helps in most cases, but such a reboot has some side effects. With this procedure, all user information will be deleted. To reboot, hold down the shutdown button and the Home button until the characteristic gears appear, which indicate that the system rollback has started. This process will end in 5-10 minutes, after which the phone will start, and you will need to re-enter the necessary information.

    When registering for repairs, you get a DISCOUNT. 5%

    Dfu. Device flashing. To run an automatic check and troubleshoot, if a forced restart did not help, you need to start a special mode of operation called DFU. In order to start this mode, you need a computer with iTunes installed:

    • Run the program on the computer.
    • Connect the phone to the computer using a cable, after making sure that the phone is turned off.
    • Within 8 seconds, hold down the shutdown and home buttons.
    • Then release the power key, but do not let go of “home, until a typical message appears in the iTunes window.
    • Click “OK”, wait until the microprocessor software rolls back.

    If a problem with the loops appears, it is worth checking the operability and connections of all loops. To do this, open the back panel of the phone and check the connections of the cables present there.

    How to restart a device without using the power button

    There are situations when you need to turn off or restart without using the shutdown buttons (especially important if they do not work at all). To do this, you need to “pull” the “Assistive Touch” function to the desktop. You can do it like this:

    • Go to the menu item “Settings”
    • Select “Accessibility”
    • Activate “Assistive Touch” by moving the slider to the “On” position

    This function on iPhone makes it possible to lock the screen, turn off and adjust the sound, return to the home page, avoiding pressing the Home button, and most importantly, it allows you to turn off the device if the shutdown button does not work.

    What to do if your smartphone’s touchscreen display becomes glitchy

    If the phone starts to glitch or freeze for the first time, first try to wait for the response of the corresponding application. The processor will close unresponsive applications by itself and return to normal operation. If there is no response, try restarting your device. To do this, follow these steps:

    • Press the “Home” button and the “Power” button at the same time
    • Hold them for at least 5 seconds

    After that, the screen will turn off, and then the phone will turn on automatically. If this does not happen, then click on the lock button and the iPhone will work.

    Another way to lock / unlock the screen on an iPhone, or simply turn on the device if the shutdown button does not respond to commands, is to charge the smartphone. It is possible that the phone will start to respond to the power button after reaching 100 percent battery charge, as it stuck due to a large number of running applications that require a lot of power.

    If the sensor lags, but the screen still works slowly and gives at least some reaction, then you can do without an emergency reboot method. To do this, just try to turn off your iPhone in normal mode:

    • Press the Power button
    • Wait until “Slide To Power Off” appears on the phone screen
    • Slide the slider to the desired position

    Then turn on the device by pressing the lock button. If Athos freezes and slows down due to a large number of open programs, then the methods of rebooting and shutting down will help him restore performance.

    If the phone freezes or slows down after updating, then reset the settings, but first save all the data on the device. There are two ways to fix your smartphone if it starts to glitch:

    • “Reset all settings”. A gentle method, since it saves all user data, in order to perform a “Reset all settings”, you need to go to “Settings”, then click the “General” button and then. Reset button
    • “Erase content and settings”. A radical method that erases all data from the device, you can also activate this function in the “Settings” (“General”. “Reset”) section by pressing the “Erase iPhone” button

    If the iPhone crashes were related to the update, then after resetting the settings, you can again normally dial the number, answer incoming calls and messages.

    If the smartphone regularly slows down and freezes, or the screen turns off by itself, then most likely a firmware update is required. Only professionals will help to solve this problem.

    Iphone is frozen

    And get the best deals from trusted masters.

    Compare and choose the best conditions

  • Feedback only from interested professionals
  • Do not waste time communicating with intermediaries
  • Apple products are one of the most reliable and high-quality in the world, but sometimes its owners may face the fact that an iPhone or iPad freezes. If the sensor lags, it could be caused by a low battery level or a software glitch. Bringing the touchscreen back to life is most often done with the usual reset method. To avoid similar problems with the iPhone in the future, you need to understand the reasons for the freezing of the smartphone.

    Why iPhone won’t respond to commands

    If the iPhone is frozen, then the first reason you should pay attention to. A large number of applications used. Especially if some of them are constantly running in the background. When running programs that require a lot of space on iOS at the same time (for example, geolocation, Facebook and various games), the following may happen:

    • The touchscreen will respond slowly when pressed, preventing you from answering an incoming call, dialing a number, sending a message or unlocking the screen altogether
    • The iPhone will simply turn off due to high battery consumption

    Iphone may start to glitch even after updating programs over the Internet. Especially if the “Auto update” function is active.

    Professional help

    If after all the manipulations performed the phone continues to slow down, periodically freezes, does not respond to locking and unlocking, seek professional help. Experts will diagnose the device, determine the reason why the smartphone does not ring and does not respond to the shutdown button. After determining the malfunction, the following work will be performed:

    • Firmware update
    • Replacement of loops on the lock key

    Iphone 7 and later

    On iPhones that were released after the iPhone 7, the Home button was made touch-sensitive. If the iOS operating system is frozen, then pressing the sensor will not work. A different emergency reboot method was made for them:

    Press the power button and volume down button at the same time. Do not release and hold for about 6 seconds.

    The iPhone will reboot. The Apple logo appears. Then it will be loaded as usual.

    This method allows you to force restart your iPhone or iPad when a software failure occurs. We advise you to use this procedure in case of emergency, and if you can get by with the remaining 2 methods, use them. Leave this one as a last resort.

    How to restart iPhone from any state?

    At least once, but every owner of an iPhone or any other iOS device faced software glitches when the device stops responding to touching the screen and pressing mechanical control buttons (Home and Power). What to do if iPhone freezes and refuses to obey elementary commands? In today’s instructions, we will introduce you, dear readers, with 3 ways to restart your iPhone from any state.

    Instruction “How to restart iPhone without a button”

    How to restart iPhone without a button?

    You can control mobile devices from Apple and iPhone in particular without mechanical control buttons. The creators took into account, albeit a high, but still limited resource of mechanical controls, and in case the touchscreen of your iPhone survived the control buttons, the operations for which the “mechanics” were responsible can be performed using gestures.

    Assistive Touch must be turned on to enable full touch control on your iPhone. This function allows you to flexibly configure control of the device using gestures and completely replaces mechanical control buttons.

    Force restart iPhone

    The forced reboot method will differ depending on the model.

    Turn off iPhone using Assistive Touch

    As part of this manual, we will get acquainted with the method of turning off an iOS device without using the “Power” button using the Assistive Touch function.

    “Tap” on the Assistive Touch menu icon;
    In the menu of this function, “tap” on the “Device” icon, and then a long “tap” (touch the screen of the device and do not lift your finger) on “Screen lock” wait for the “Turn off” and “Cancel” buttons to appear;
    And then everything is like when you turn off the iPhone in normal mode, make a “swipe right” on the “Turn off” button. The device will start to turn off;

  • How can you then turn it on if the off button is not working properly? Just connect your iPhone to your computer using a USB cable and it will turn on normally.

    How to restart iPhone, put it into recovery mode or DFU

    Step-by-step instructions for different models.

    How to reset iPhone SE, 5s and earlier

    Hold the top button and the Home button.

  • Hold them until the Apple lotogo appears.

    How to restart iPhone 6s and 6

    Hold the side button and the Home button.

  • Hold them until the Apple lotogo appears.

    How to restart iPhone 8

    Hold the side button and volume up button.

  • Hold them until the Apple logo appears on the screen.

    How to restart iPhone 7

    Hold the side button and volume down button.

  • Hold them until the Apple logo appears on the screen.

    How to restart iPhone

    A reboot may be necessary if the smartphone is frozen and does not respond to pressing.

    Iphone frozen and won’t turn off or restart

    Usually, if the iPhone freezes, users try to turn it off or restart using the standard procedure, namely by long pressing the On / Lock button. Unfortunately, in most cases when the iPhone hangs, this shutdown method does not work. The iPhone continues to work and run frozen applications, regardless of how long the user presses the power button.

    But, the iPhone has an alternative shutdown method that bypasses the iOS operating system. Thanks to this, this shutdown method works even on tightly frozen devices. The method consists in simultaneously pressing the “Home” button and the Power / Lock button.

    Home and Power Buttons

    Buttons “Home” and “Power on” must be pressed simultaneously and held until the frozen iPhone turns off. After turning off, you need to wait a few seconds and make a short single press on the power button. After that, the iPhone will turn on and start working as usual.

    It should be noted that the key combination “Home Power on” is also responsible for taking a screenshot. But, to get a screenshot on these keys, you need to press literally for 1 second, if you hold the keys longer, then the anti-freeze protection will work and the iPhone will reboot.

    If you have an iPhone X or newer, then you need to use the new reboot method.

    What to do if iPhone is frozen

    Freezing is a problem that any computer hardware faces. At some point, one of the programs begins to behave incorrectly or conflicts with another program, and as a result, the entire device is inoperative. This situation is called freezing.

    Iphone is also prone to this issue and may freeze from time to time. Usually, when the iPhone freezes, it refuses to turn off or restart, which baffles the user. Most often old models freeze, such as iPhone 4, 4s, 5, 5s and 6. But sometimes even iPhone 6s and 7 users face freezes.

    If you find yourself in such a situation, then this material should help you, here you will learn what to do if your iPhone is frozen.

    Iphone freezes when turned on

    Pressing the Power On Home buttons at the same time allows you to turn the device off and on in any situation. However, this procedure does not guarantee that the iPhone will not freeze again during the startup process.

    If your iPhone freezes before the device is fully loaded, then you can use the recovery mode called “Recovery Mode”. With its help, you can restore the original state of the iPhone and bring it back to life. But, it should be borne in mind that this procedure is equivalent to a reset to factory settings and leads to the deletion of all user data.

    In order to enter Recovery Mode on iPhone and perform recovery, you need to do the following:

    Turn off your iPhone and wait a couple of minutes for all programs to finish their work. If the iPhone does not turn off in the standard way, then you can resort to the combination “Home Turn on” described above.

  • Then you need to press the “Home” button and without releasing it, connect the iPhone to the computer via the Lightning cable.
  • After connecting, continue to hold the Home button until the iTunes logo and cable image appear on the iPhone.
  • Now you need to release the Home button and start iTunes on your computer.
  • In the iTunes program, you need to go to the iPhone settings and click on the “Restore iPhone” button.

    Restore iPhone button

    Thus, you can solve the problem with the iPhone freezing during startup, but, as already mentioned, for this you will need to donate all user files. You can read more about Recovery Mode in our article on resetting iPad to factory settings.

    Also on Apple devices there is a so-called DFU mode or Device Firmware Update. If the recovery mode does not help, then you can try to enter the iPhone into DFU mode and try the recovery again.

    Why the apple burns and the iPhone does not turn on

    The reasons for the failure can be different, the most common are:

    • The iPhone battery is discharged and the phone can only turn on until the apple and then turns off.
    • Ios operating system in iPhone.
    • Incorrect iOS update download.
    • Operating system crash due to jailbreak.
    • Hardware problems due to mechanical damage.
    • Water ingress into the iPhone resulting in a short circuit.
    • Power button stopped working (on / off button).
    • We will analyze all these reasons and try to give very clear instructions so that you can fix the iPhone stuck on an apple.

      Iphone stuck on an apple

      How to Hard Reset on iPhone

      Our blog already has detailed instructions on how to do when the iPhone does not turn on, in which case we also advised to do a Hard Reset. This method helped many, comments with gratitude confirm this.

      To hard reset your iPhone:

      Press and hold the “Home” and “Power” buttons (if you have an iPhone 7, iPhone 8, iPhone X or iPhone 11, instead of the “Home” button, press the volume down button.

    • You must hold the buttons for at least 10 seconds, after which the iPhone should turn on.
      Hard restart iPhone

      If your iPhone has a slight crash, then this method should help. If, nevertheless, the Yabloko logo continues to burn and the iPhone does not turn on, but goes out and off, then. You need to update or reinstall (reflash) iOS using iTunes.

      How to update iPhone via iTunes

      Connect iPhone to PC or Mac.

    • Perform a Hard Reset on iPhone (instructions above).
    • On a PC or Mac, a recovery window will appear in iTunes, you must click on the “Update” button.

      After updating and installing a new version of iOS, the problem should be resolved. If, nevertheless, the update did not work, and the burning apple does not disappear on the iPhone screen, proceed to flashing iOS.

      How to Flash iPhone via iTunes

      Flashing or restoring your iPhone is the last option to fix your phone crash. After flashing, all data will be erased from the iPhone, but for that you will return the phone to work. In such cases, you always remember about the backup made and the ability to restore all data from the backup.

      Connect iPhone to PC or Mac via USB / Lightning.

    • Press and hold the “Home” and “Power” buttons (iPhone 7, iPhone X, iPhone 11 and others instead of the “Home” volume down button).
    • You need to hold down the buttons until the message “iTunes has found iPhone in recovery mode” appears on the computer. Click “OK”.
    • In the iTunes panel, click the “Restore iPhone” button.
    • Then you need to click in order to confirm the buttons “Next” and “I Agree”.

      After completing the steps to enter iPhone DFU mode, nothing will be displayed on the phone screen, only after downloading the firmware you will notice a progress bar when the recovery process starts.

      After restoring iPhone, you need to do the initial setup and restore data from the backup.

      How to Update or Restore iPhone via Finder

      For now, Mac owners running macOS Catalina can update and restore iPhone via Finder.

      To restore or update an iPhone on a Mac running macOS Catalina:

      Connect iPhone and Mac with Lightning to USB cable.

    • Iphone will display a “Trust this device” notification click “OK”.
    • Open “Finder” in the “Places” section and the iPhone icon will appear.
    • Click in the “Finder” on the iPhone item, all information will open, where there is an opportunity to backup, update or restore iPhone.
    • Follow all the steps we described as for iTunes.

      If our advice did not help you, then with a probability of 95% your iPhone stuck on an apple due to internal mechanical damage. In such a situation, you need to go to the service center. It is better, of course, that it is an official or certified Apple service.

      What to do when the iPhone is frozen on an apple?

      Your iPhone stuck on an apple and won’t turn on? Don’t be discouraged, even the best gadgets may freeze and not work correctly. In our publication we will tell you what to do when the iPhone does not turn on, the apple is on. Our step-by-step instructions will help you fix a phone failure on your own and you will not need to contact a service center.

      Why the apple burns and the iPhone does not turn on

    • How to fix if iPhone is frozen on apple
    • How to Hard Reset on iPhone
    • How to Update and Restore iPhone on PC or Mac with iTunes
    • How to update iPhone via iTunes
    • How to Flash iPhone via iTunes
    • How to Update or Restore iPhone via Finder
    • Answers to frequently asked questions when apple freezes and burns on iPhone