iPhone 7 touch not working

Reboot your iPhone (first and easiest)

Regardless of whether the iPhone Home button is physical damage or a software bug, you should restart your iPhone first. Once you restart your iPhone, you can enter the home screen on your iPhone to perform the following operations. Alternatively, you can clear all cache on your iPhone and disable all apps that can fix the problem caused by app conflict.

Blank iPhone

Coffee splash, sticky hands, long-lasting dust, and other things can damage your iPhone.

To fix the problem, you need to clean the iPhone home button.

For this fix, you will need 98-99% isopropyl alcohol, cotton swab, dropper or tissue paper.

Get 2-3 drops of isopropyl alcohol directly on the Home button, not on the screen, use a cotton swab to wipe it off. Press the Home button several times to let the alcohol seep into the frame, wait about 10-15 minutes before checking if it worked.

Repair iPhone connector

As we know, iPhone 7 runs out of power and charging your iPhone every day or more is very common. Plus, the 2-in-1 headphone jack allows you to use it more often.

However, plugging and unplugging the 30-pin connector can inadvertently budge some things.

The Home button is located directly above the connector port, so it can disable the Home button.

To cure it, you need to rebuild the iPhone connector.

Insert the connector into the iPhone Slowly press the connector that pressed the Home button Press the Home button and disconnect the cable.

Then check the Home button to see if the issue is resolved.

iphone, touch, working

Calibrating iPhone

Calibrating iPhone is a common method used by basic users.

You need to launch the default application. Hold the Sleep button until the Slide to Disconnect message appears. Release the Sleep button and hold the Home button for 5-10 seconds and the application will close.

This solution makes the Home button work better.

7 fixes to act now when your home iPhone isn’t working

IPhone Home button not working after update, screen replacement, or for unknown reasons? Read and accept 6 methods on this page to fix the problem yourself.

“My Home button is not working after updating iOS 12 on my iPhone 6. How can I fix the stuck Home button?”

“When I’m playing a movie on my iPhone and I want to exit to return to the home screen. I found that my Home button was not working. God, how can I exit the YouTube app? My iPhone. this is an iPhone 7 running iOS 11. “

Home button is the same as sharing. Whatever you do on your iPhone, you can tap it to return to the home screen to start a new task. You can also double-tap to view all background tasks and easily disable or replace a task.

However, when you press the Home button, you can be shocked.

Why iPhone Home Button Doesn’t Work?

A broken Home button could be caused by physical damage like dust, broken Home button, or software bug like iOS update, app conflict, etc.

How to Fix iPhone Home Button Not Working?

This post contains 7 simple solutions to fix iPhone Home button not responding.

  • Reboot your iPhone (first and easiest)
  • Turn on the on-screen Home button via AssistiveTouch
  • Calibrating iPhone
  • Reset and Restore iPhone
  • Repair iPhone connector
  • Blank iPhone
  • Replacing the “Get” button

Reset and Restore iPhone

Sometimes, some settings or applications can conflict with current operations, which can cause the Home button to become unresponsive or unresponsive. Resetting your iPhone to factory settings, or restoring your iPhone to its original backup may fix this problem.

Note: Resetting iPhone will erase all data and settings on your iPhone, so you’d better back up iPhone important data before doing this.

On your iPhone, go to Settings Reset Erase All Content and Settings Enter the password on the screen to confirm the changes, then reset your iPhone to factory settings.

After that, your iPhone will restart and be redirected to the Apps & Data screen, while you can choose to install it as new or restore from iTunes / iCloud backup or move data from Android.

Turn on the on-screen Home button via AssistiveTouch

AssistiveTouch. is an on-screen tool that helps you perform gestures such as pinching, multi-finger swiping, or 3D Touch, and using Siri. In other words, AssistiveTouch. it is an alternative to the home button to play on your iPhone.

iPhone 7 Touch Screen Not Working- IC Damage Case. Logic Board Repair 7代无触摸主板IC维修

Go to Settings General Accessibility AssistiveTouch or Accessibility Shortcut, then turn on AssistiveTouch.

You can also tell Siri “Turn on AssistiveTouch”.

Thus, you can replace the Home button with an on-screen Home button.

Scan your finger correctly

Sometimes, if your finger does not properly touch the Home button on iPhone, your Touch ID will stop working as well.

You need to make sure your finger is completely covering the Home button by touching the surrounding metal ring. Don’t press too fast or move around your finger until Touch ID recognizes your finger.

Touch ID not working on iPhone or iPad? Here are 10 solutions

I just got a screen replacement on my iPhone 7 and when I try to unlock it with my fingerprint, Touch ID stops working. Nothing happens on my iPhone and I need to unlock it with a password. Why did it stop working? How to fix Touch ID on my iPhone

Touch ID. This is an electronic fingerprint recognition feature developed by Apple. With a light press on the Home button, you can easily unlock your iPhone screen, make an App Store purchase, and confirm your payment online.

Why did it stop working?

How to fix not working Touch ID?

Here are 10 quick solutions to help you get rid of Touch ID not working from iPhone, all of which are easy to use.

Remove and reset Touch ID

If you have problems with your finger, such as changing the skin of your finger, you’d better delete the old fingerprint and reset the new one.

You can then use your fingerprint to touch the Home button to see if Touch ID works or not.

Clean and dry the Home button

Make sure your finger is dry and clean and the iPhone fingerprint reader is dry and clean.

For your finger, you can wash your hands and dry it.

For the Home button, you can use a lint-free cloth to erase anything that might interfere with Touch ID recognition.

Turn Touch ID on and off

Touch ID. these are the settings of your iPhone and iPad. You can disable and enable Touch ID settings to unlock iPhone, Apple Pay, iTunes and App Store.

Why Touch ID Stops Working on iPhone iPad?

The reasons why Touch ID doesn’t work are various. Here we conclude as shown below:

Outdated version of iOS. Outdated iOS on iPhone or iPad may crash Touch ID.

Dry or wet finger. Your finger is too dry or wet, causing Touch ID to fail.

Incorrect finger touch on the Home button. Partial finger touch on the Home button is not recognized by Touch ID.

IOS system problem.

Your original finger is not working. If you have a finger injury and the appearance has changed, Touch ID will not work in a certain way.

As we find out why Touch ID stops working, we can fix this issue by following the solutions in the next part.

Downgrade iOS

The newest one may bring you more features, however the latest iOS version doesn’t always work well on all iPhone models. The battery drain defect on iOS 12 makes many regret the iOS update. Thus, while the iOS update is not working, you can try to downgrade the iOS version.

Sounds like only experts can downgrade iOS easily, right?

No, actually. You can also perform iOS downgrade task using software.

Aiseesoft iOS System Recovery is an iOS system recovery tool that fixes many system problems such as iPhone stuck, black screen, Apple logo, start up loop, etc. over, it can update your iPhone to the latest version or upgrade to any version. iOS on this device. supports.

  • Fixed iPhone Touch ID not working due to iOS system issues.
  • Scan iPhone and Extract Data from Forgotten iPhone and iPad Passwords.
  • Update iPhone to the latest iOS version or return iPhone to a supported version.
  • Compatible with iPhone 11, 11 Pro, 11 Pro Max, XS, XR, X, 8, 7, 6, 6, 5, 4, iPad Pro / Air / mini, etc.

Connect your iPhone to your computer with a USB cable. Just remember to press the “Trust” button on your iPhone the first time you connect your iPhone to a computer, which will allow that computer to manage your iPhone’s data.

Correct your iPhone information from category, type and model if the information is incorrect.

Then select the iOS version you want to downgrade and click Next to start downloading the firmware and downgrading iOS.

Then you can use Touch ID to see if your Touch ID can work fine.

If Touch ID doesn’t recognize your finger well, try this

Touch ID began to be installed for the first time on the iPhone 5S in 2013. Later, the scanner was equipped with new models of iPhone, iPad and MacBook Pro.

  • iPhone 5s;
  • iPhone 6/6 Plus;
  • iPhone SE;
  • iPad Air 2;
  • iPad mini 3/4;
  • iPad Pro 12.9 ″ (first generation 2015);
  • iPad Pro 9.7 ″;
  • iPad 2017/2018.

Faster 2nd generation Touch ID installs in:

  • iPhone 6S / 6S Plus;
  • iPhone 7/7 Plus;
  • iPhone 8/8 Plus;
  • iPad Pro 10.5 ″;
  • iPad Pro 12.9 ″ (2nd generation 2017);
  • MacBook Pro 2016/2017.

The generations of sensors differ only in the speed of response, but not in the degree of fingerprint recognition. The features and tricks described below will work with both generations of Touch ID.

What affects how Touch ID works

The fingerprint sensor at the time of its appearance in the iPhone 5s was head and shoulders above the available solutions from competitors. The developers managed to create a device that correctly reads the owner’s fingerprint quite quickly and with high accuracy.

Two years later, the sensor was modified, halving the response time of the sensor.

The performance of the sensor is definitely affected by dirt and liquids. Maximum response accuracy is guaranteed with a clean sensor surface and no grease, dirt or water on the finger. Despite this, the scanner requires daily cleaning only under very difficult operating conditions.

Most users don’t need to wipe Touch ID or wash and dry their hands before using their smartphone.

What does not affect how Touch ID works

The sensor is not affected by ambient temperature and humidity. Even if you use the device in cold weather, when the skin on your fingers is slightly compressed, a minor change in the fingerprints will not have a serious impact on the operation of Touch ID.

Does not affect the response speed of the smartphone battery and its charge level. Some users mistakenly believe that a sensor with a charged battery performs better.

There is no confirmed evidence of the Touch ID learning system, where repeated touching the sensor in the Settings. Touch ID and passcode menu increases the accuracy of the sensor. In this menu, this is only intended to indicate the entered fingerprint.

How, then, to improve the accuracy of Touch ID

The essence of the method is to add several prints of one finger, but at different angles and in different positions. If the fingerprints of the wife / husband, children or relatives are not entered in the smartphone, you can fill all five slots with your data.

Use either two prints for a non-working hand and three for a working hand, or four for a working hand and one for a non-working hand.

Go to Settings. Touch ID & Passcode and delete existing fingerprints.

Now add a new fingerprint for the hand with which you most often hold your smartphone. Try to press the top of the fingerprint against the sensor when adding a fingerprint.

Add another fingerprint and re-enter the same finger, but use most of the touches with the lower part of the fingerprint.

Add a third print for the same finger, but at the same time do not hold the smartphone in your hand with a normal grip, but in the most familiar place, for example, when taking the iPhone out of your.

Now you can add two fingerprints for the thumb of the second hand, or just one such fingerprint, and with the last one fix the finger of the main one in another atypical position, for example, by clicking on the smartphone in the car holder.

By adding two prints to one finger (one for the top of the pad, and the other for the bottom), a large area of ​​the skin can be entered into the memory of the device. When adding a fingerprint in a specific position (taking it out of a. in a holder or on a table), we teach the sensor to press a widespread pressure at a specific angle.

This simple method will allow you to minimize the percentage of false positives of the Touch ID sensor.

If it’s Touch ID that’s not working

Touch ID. this is the name that iPhone fingerprint recognition is built into the home button. It is possible that this is the one that is giving you the glitches, while the rest of the functions associated with that button are working correctly. If you are in such a situation, the first thing we recommend that you do is restart your iPhone. Yes, it may seem absurd, but in some cases phones may have some kind of process in the background that creates a conflict with their functionality, and in order to fix this, you need to restart it.

It could also be the case when your finger is dirty or wet. because in this case your fingerprint changes and Touch ID cannot recognize it. Therefore, try wiping and drying your finger to re-recognize the fingerprint. It is also possible that the device is dirty, so you should also clean the Home button.

If this option doesn’t work for you, you’ll have to go to Touch ID Settings and Code. enter the iPhone security code and finally delete all enrolled fingerprints and reconfigure them. Basically, this should already fix any issue, but if not, skip to the last section of this article where we mention how to contact Apple.

Update iPhone to the latest version

Now that you already have access to the button, even if it’s virtual, we need to start to rule out errors. The software can sometimes cheat, and sometimes it fixes a restart. However, this may not be all, as some iOS errors can prevent the button from working properly, although it is not common. Anyway, go to Settings General Software Update and check if there are any pending iOS updates you can install.

Completely eliminate any software problems

We continue with the operating system causing the problem, excluding the issue of updates or background processes. The most radical but most effective solution to any such problem is to restore the iPhone. To do this, you can go to Settings General Reset and click on “Delete content and settings”.

However, the cleanest option to restore iPhone is via computer. Here we will show you the steps to do it with any type of equipment.

Mac with macOS Mojave or earlier

  • Connect iPhone to Mac with a Cable.
  • Open iTunes and go to the device management part by clicking on the icon at the top.
  • Go to the “Summary” tab and click “Check for Updates”.
  • Follow the instructions displayed on the screen and do not disconnect your iPhone until the whole process is complete.

Mac with macOS Catalina or later

  • Connect iPhone to Mac with a Cable.
  • Open Finder window and click on the iPhone name in the left pane.
  • Go to the General tab and click on “Restore”.
  • Follow the instructions displayed on the screen and do not disconnect your iPhone until the whole process is complete.

IPhone 7 Home Button Not Working: How To Fix It

Don’t worry if your iPhone 7’s Home button is malfunctioning or is causing you some kind of problem. It is unusual that this does not work, but it may be, and sometimes the solution is simpler than we think. In this post, we’ll show you how to fix it.

Via a Windows PC

  • Connect iPhone to computer via cable.
  • Open iTunes and go to the device management part by clicking on the icon at the top.
  • Go to the “Summary” tab and click “Check for Updates”.
  • Follow the instructions displayed on the screen and do not disconnect your iPhone until the whole process is complete.

Top 4 Methods to Fix iPhone Touchscreen Not Working Properly

If your iPhone is stuck, iPhone touch screen is not working and cannot turn off, what will you do? There seems to be nothing you can do with the iPhone’s unresponsive touchscreen. And sometimes your iPhone touchscreen just doesn’t work randomly. There must be something wrong with your iPhone, regardless of a hardware problem, software glitch, or improper action. Here are some easy-to-use solutions to fix iPhone touchscreen not working properly.

  • Force Restart iPhone Touch Screen Not Working
  • 3D touchscreen sensitivity setting for touchscreen customization does not work on iPhone
  • Factory reset to install iPhone Touch Screen Stop Work
  • recovery on iPhone Touch Screen Unresponsive

recovery to fix unresponsive touchscreen on iPhone

Restore iPhone. it is a two-way method that can help iPhone touchscreen not work all the time and in other situations, but your partial iPhone will be deleted and return to safe mode to some extent. If your iTunes backup file was a long time ago, then it might not be right to fix iPhone screen not working.

Connect iPhone to Computer with USB Cable.

Find Conclusion in the Device menu, click This PC and Back Now.

Blow iPhone Recovery and Wait for iPhone Recovery.

Note: Make sure iTunes is up to date with the latest version before restoring.

Factory Reset iPhone to Repair iPhone Touch Screen Not Working

Factory reset. this is a method to erase all media and data on iPhone and the previous settings will be erased. Well, no third party iPhone apps to install on iPhone need to be installed to fix the irreparable iPhone touchscreen issue.

Select Settings first and then click “General” and “Reset Options”.

Hit Delete content and settings in the Reset menu.

Enter your Apple ID and password to sign in and click Erase iPhone to move on.

After a factory reset, potential spyware or other software can cause crashes that will be completely erased. Back up important iOS data ahead of time.

Adjust 3D Touch Screen Sensitivity to iPhone Touch Screen Unresponsive

As mentioned in the first solution, restarting an iPhone is a powerful, but not the only or versatile method to allow you to use your iPhone’s touchscreen again. If restarting your iPhone won’t fix your iPhone screen, then checking your iPhone 3D Touch Sensitivity will be a nice replacement.

Find Settings click “General” and “Accessibility”.

Scroll down to click 3D touch option.

Turn 3D Touch on and off as you like.

There is a 3D touch sensitivity slider to adjust the 3D effect from light to medium to hard if you turn on touch 3D about.

3D Touch. it is an effect to make the objective picture in photographs more vivid. Sometimes it’s just 3D Touch effect stuck causing iPhone touchscreen not working.

Prepare: iPhone Touch Screen Stops Working Causes and Situations

First of all, check to see if your iPhone has been shoved into water, has occasional crashes, or you are just wearing gloves, even if they are very thin. Remember to clean your finger and iPhone screen.

This always happens when updating iPhone to iOS10 / 10.1 / 10.2. And the related issues will cause the iPhone screen not to respond to the iPhone 7 / 6s / 6 / 5s / 5. The iPhone screen fails to follow any instructions when receiving phone calls. And no matter how you press or tap the iPhone touchscreen, nothing will change. If the above circumstances are excluded, and your unresponsive iPhone is only in the state described above, go to the next screen of the iPhone touch.

Force Restart iPhone Touch Screen Not Working

I must say that restarting a digital device is the most advanced and powerful solution to fix and test the most common problems. In some cases, the iPhone may not work with the touch screen. And restart iPhone to fix iPhone touch screen not working in any way, such as not responding while charging, jailbreak, replace iPhone screen and others. There is nothing difficult for you to work, no additional fees and additional applications for third-party developers.

Hold and press the Sleep button for a few minutes.

Move the slider to the right to disable the slider.

Wait a few minutes and turn your iPhone back on.

You can try restarting your iPhone for a few seconds, or wait 5 minutes and then turn it on to give a long break while working with the iPhone battery.

Bottom line

With all of the above methods to allow iPhone touchscreen access, you can choose and compare to find the most suitable iPhone screen that stops working with fixes, although there are certain drawbacks. If your iPhone is jailbroken, dropped in water, or similar hardware damage, you may need to change part of your iPhone to enable the touchscreen.

Take it easy and look for reasons and solutions to fix iPhone black screen. With Guide to Eliminate Black Screen on iPhone.

Fix iPhone Blue Screen Without Data Loss Using iOS Data Recovery. You can restore the blue screen resolution.

If you want to protect your iPhone screen from scratches and keep it clean, then follow the methods to clean your iPhone screen.

In this article, you will find all solutions for iPhone 7/7 plus / 6s / 6s plus / 6 / 5s / 5 stuck in headphone mode.

Copyright © 2021 Tipard Studio. All rights reserved.

Remove or update / reinstall the problematic application

Sometimes the iPhone touchscreen is unresponsive only in a specific application. If this happens to you, then most likely the problem is in the application itself, and not in the screen, but when you open the application, the screen stops responding, as the application “freezes”. The hung application will not respond to any touch, but by pressing the Home button, you will exit the application and return to the home screen.

If the touchscreen doesn’t work in the app, try updating it. Open the application and check the available updates for it, if an update is available, install it.

If the screen still doesn’t work after updating the app, the best solution is to uninstall the app and reinstall it. Run the application again to make sure everything works. If the issue persists, it is obvious that there is a bug in the application that should be reported to the developers. If the touch screen does not work only when one application is launched, but in other cases it works properly, then it is obvious that the problem is in the application, and you do not need to take any action on the screen itself or the iPhone.

Free up iOS memory

When iPhone is out of memory, it tends to fail and therefore the touchscreen may freeze.

Make sure your device has free memory. You can check this by going to Settings General Storage and iCloud Storage. The main thing is to have at least a few hundred MB, iOS starts to work less efficiently if it has little free memory.

Delete apps you don’t use is the easiest way to free up memory.

I noticed that indeed in newer versions of iOS, if the storage is full, many applications stop responding and the screen does not work. Sometimes even the Home button may not respond for a while on an iPhone with full memory until you uninstall apps or clear the cache. It’s easy to check. Just fill your memory completely and then try to use an app that consumes a lot of memory, like Instagram, Spotify, etc., when this app fills up the cache, you will notice that the screen will stop responding for a while, as iOS is trying to deal with the lack of memory in storage. In this case, just free up some space and restart the device, after that it should start working again.

Troubleshoot iPhone touch screen stuck

There are several steps to troubleshoot a broken touchscreen on iPhone 8, if your iPhone is not responding to touch and screen, then follow the guidelines to fix the problem. There was a similar problem on my device, and these steps I used to fix it, in my situation I just needed to restart my iPhone and free up memory for the touch screen to work.

Clean the screen and wash your hands

First, you need to wipe the screen of your iPhone, and wash your hands (or clean another input device). If you have a case or other screen protector, remove it, as this may be the reason for the screen not functioning.

Look at the device in good light and tilt it in different directions to make sure it is free of stains, oil, liquid, moisture, crumbs, or anything else that might interfere with the screen. In sunny weather, sunscreen that can get on the screen may be the reason why the screen does not work or does not work properly. Make sure the iPhone screen is clean and remove anything that might interfere with its performance. Wipe it with a soft cloth to remove everything from the screen, you may need a slightly damp cloth (just a slightly damp cloth is enough) to wipe the screen.

As for your hands, stylus, or other input devices, just make sure they are dry and clean. Wash your hands if in doubt that they are clean enough. Dry skin or calluses are usually not the reason the screen is unresponsive, but touching the screen with wet hands can cause it to become unresponsive. Just make sure the screen is clean and your hands are clean and dry.

Smashed the touchscreen? Damaged or dropped iPhone?

In such a situation, everything is obvious from the very beginning that if the touchscreen is cracked, there may be problems with its functioning, or the screen may stop working altogether. Also, if the iPhone is damaged, the screen may stop working completely or work intermittently.

In case the iPhone was wet, the touchscreen could break, and the entire phone could also break.

If the iPhone gets wet, it is possible that internal components have become loose, causing the screen to fail.

Touch Screen not working on iPhone? We will tell you how to fix it.

It rarely happens that the iPhone touchscreen stops working or responds to touch. Obviously, if this still happens to your device, you will touch the screen, but nothing will happen, when you try to perform the “swipe” action, nothing will happen, or the device will not respond to pressing and other actions. If your phone screen stops working, it stops responding to touch, you will be annoyed.

If your iPhone’s touchscreen has stopped working, read below for helpful instructions on how to troubleshoot and help resolve the issue. There are several reasons for screen problems, sometimes they are related to software problems, dirt on the screen or damage to the touch screen or the iPhone itself, there may be other reasons as well. Read on to find out more.

IPhone touchscreen still not working? Now is the time to take serious action

If the iPhone screen is still not working, you can try iTunes backup and restore. Just remember to back up your iPhone files to iCloud or iTunes beforehand. If you contact the official technical support. employees will most likely restore your device. Since this is part of their job. fixing any faults.

How To Repair iPhone 7 Touch Screen Not Working

If the iPhone is not responding because it is stuck on the Apple logo, this is a completely different problem that is not related to the touch screen, on all devices you can fix this by restoring the device or using a restore in DFU mode.

Performing an entire system reboot

Often, simply rebooting the device will not fix the touch screen freeze problem, but rebooting the entire system is the most effective method.

Performing a hard reboot is easy, but it depends on your device model:

  • To force restart iPhone 7 and later without pressing the Home button: Press and hold the Volume Down and Power buttons until you see the  Apple logo
  • To force restart iPhone 6s and later by pressing the Home button: Hold the Home and Power buttons until you see the  Apple logo on the screen.

The touchscreen should work again when the iPhone turns on if the problem is due to a simple error or a freeze in the iOS software or app.

From personal experience, I can say that the screen of my iPhone 7 Plus can sometimes stop responding to touches and a hard restart always helps.

Touch ID Stopped Working. How I Solved This Problem!?

Hello everyone! As it has been repeatedly noted on the blog, all articles are those problems or questions that either I myself or my acquaintances have encountered. Actually for this, the site was created. to share personal experience and help others with the “Apple” technique. And so, my already quite old, but still working iPhone 5S “threw” me another idea for instructions. its Touch ID suddenly stopped working.

And, as it seemed to me at the first moment, it happened finally and irrevocably. No, but what else can you expect? The device is far from new. Chips, scratches, scuffs, falls. all this was and is. Natural wear and tear of the device. there is no escape 🙂 Therefore, when the Touch ID fell off, I was not very surprised. Surprise came only later, in the process of solving this problem. however, let’s talk about everything in order.

So, a short background:

  • I upgraded to iOS 10.3.1
  • After some time, I began to notice that the sensor for unlocking does not always work. But, as usual, I did not attach any importance to this. maybe the hands are dirty or something else.
  • But after I could not enter the client bank by fingerprint, in my head “solitaire” was formed. Touch ID does not work.

Looking ahead, I will note that everything was resolved safely. But what actions had to be taken for this?

Find out now, let’s go!

It is worth noting that if your iPhone has a non-native Home button (for example, replaced after repair), then Touch ID will not function on it. Never. The fingerprint sensor is hard-wired to the motherboard. One board. one Home button. Also, some sellers immediately sell an iPhone with an inoperative scanner. I already wrote what kind of devices they are.

But our problem is different. the iPhone stopped recognizing the fingerprint, although nothing happened to it (except for the iOS update).

I thought it was a simple “glitch” of the system and did this:

  • To begin with, I forcibly performed a hard reboot. it’s very simple. And in some cases it helps to get rid of system crashes. But not at this time.
  • Opened “Settings. Touch ID and Passcode”, deleted the old fingerprint and tried to add a new one. There were no problems with the removal, but at the stage of adding a new one, the scanner simply did not read my finger and showed a white screen. Sometimes adding an inscription. “You pressed the button. Place your finger on the Home button without pressing it “.
  • Well, I think things are really bad. we need to do a firmware restore. Backed up and recovered.

And here, it would seem, everything should end. But no. the miracle didn’t happen and Touch ID still didn’t work. After that, it became clear that the problem was “iron”. And it consists in the loop of the Home button:

  • It may be damaged (moisture, careless assembly or disassembly of the device).
  • It may simply not be inserted (not fully installed).

And it seems like this is not my case. I did not wet the iPhone, and since the last disassembly the scanner worked fine.

But all the same, the device had to be disassembled and this is what happened:

  • I took apart the iPhone.
  • Disconnected the loop of the Home button.
  • Looked at him and, as expected, saw nothing. he is in perfect condition.
  • Put it back.
  • Touch ID is working.

Honestly, the result I got surprised me a little 🙂

I don’t know why a simple reconnection of the loop helped, but the fact remains. after this operation, the button began to process my fingerprints normally.

Although I have one idea why this could happen. lately my iPhone has dropped several times (and quite hard). I already thought that it would come to replacing the screen, but in the end. in general, everything worked out. And, perhaps, it was these falls that caused all the malfunctions that were described just above.

How to solve the problem with a breakdown

With insufficient experience, the best solution would be to inspect the gadget for mechanical damage, as well as to carry out calibration. If the calibration fails, the service center staff will help. Especially if sticky liquid (alcohol, soda, etc.) gets inside the device. IPhone 7 Button Not Pressing? While the problem is being resolved, you can launch the virtual alternative using Assistive Touch. Let’s analyze the solutions in order.

On my own

The key may have stopped working due to contact with dust. Also, greasy hands can also cause breakage. Apply a small amount of WD-40 aerosol to the key, touch it several times. But use a small amount of chemical and do not let the aerosol come into contact with the screen.

In many situations, standard calibration is the solution to the Home button problem. If the Home button is not working on iPhone 7 Plus, do the following:

  • Turn on any application, hold down “Power” and wait for the command “Turn off”.
  • Hold “Home” for 10 seconds to make the application quit. After that, calibration will start.

To turn on AssistiveTouch, go to Settings and then open Accessibility. Item “Interaction”, then run the toggle switch “AssistiveTouch”.

Causes of problems with the Home button

  • Liquid ingress. Although the device is impervious, you should not allow the liquid to come into contact with the smartphone.
  • Falling down, pressing hard. Inadvertently, the user drops the gadget, or presses the button too hard. another reason why the Home button does not work on the iPhone 7.
  • Frost and other climatic conditions. When using your device in cold weather, the Home button on iPhone 7 stopped working? In this case, it is better to go into a warm room and wait until the phone warms up.
  • Wear. After several years of operation, the equipment may break down, as well as its components.

Home button stopped working on iPhone 7

reading time: 2 minutes

Even the most tidy Apple smartphone users can run into problems. Usually, the Home button doesn’t work on iPhone 7 after replacing the display, but there are other reasons as well. Let’s analyze the main ways to solve the problem below.

There are many reasons for the home button breakdown, but most often it is due to poor handling. If in your case, after a poor-quality repair, the home button on the iPhone 7 does not work, it is worth trying several methods to solve the problem. Let’s analyze the main reasons.

Through the service center

Due to the intricacies of replacing “Home”, it is rather difficult to do it yourself. In this case, feel free to contact the service center staff. The next generation iPhone 7 scanner is motherboard-bound, making DIY repairs even more difficult. We also advise you to read the information on how to replace the Home button on iPhone 7.

Instructions for solving the problem yourself:

Touch ID does not work well on iPhone and iPad. five ways to fix the problem

The first Apple smartphone with a Touch ID fingerprint scanner was the iPhone 5s, which hit the market back in 2013. Since then, the “Apple” corporation has managed to develop and begin to implement the second generation of the fingerprint module, which is distinguished by increased recognition speed and increased reliability. Nevertheless, problems can arise in the operation of any generation of Touch ID, so the editors of AKKet.com decided to talk about five ways that will fix a poorly working fingerprint scanner in iPhone and iPad.

Clean the module from dirt and dust

Since Touch ID performs a finger scan, it should always be kept clean. Of course, you should not overdo it with cleaning, but dirt and dust can cause poor performance of the entire module and lead to incorrect fingerprint recognition. You can remove dust and dirt from Touch ID with a special electronics cleaning solution. It should be sprayed onto a microfiber cloth and thoroughly clean the entire module for a few minutes, and then test its operation.

Activate Touch ID in iOS Settings

Before starting to look for the cause of the non-working fingerprint scanner in the iPhone and iPad, you should make sure that it is enabled in the settings of the iOS operating system. To do this, you need to launch the “Settings” application, and then go to the “Touch ID and Passcode” section and activate the toggle switches opposite all the parameters associated with this module. If they are already on, then they can be turned off and on again in order to exclude the possibility of some kind of bug.

Update the iOS operating system to the most recent version

Despite the fact that the iPhone and iPad are among the most reliable mobile devices in the world, the iOS operating system can experience some glitches and glitches. As a result, the Touch ID module may not work correctly on certain firmware versions. This issue is resolved by updating the device to the most recent version of iOS, which for sure does not have software problems with Touch ID.

Finger placement when scanning

In some cases, unlocking iPhone and iPad via Touch ID may not work for the simple reason that the fingerprint scanner cannot scan. To help him do this, place the pads of his finger all over the fingerprint scanner. In addition, Touch ID takes some time to scan, so don’t take your finger off the scanner too quickly.

Adding additional prints

Up to five fingerprints can be added to all iPhones and iPads to unlock the device. Apple does not impose any restrictions on this, so the same finger can be scanned several times, thereby increasing the chances of successfully unlocking the device with it.

If all the described methods of solving problems in the operation of Touch ID did not help, then you should think about visiting a service center. It often happens that the fingerprint modules in the iPhone and iPad fail and the only way to solve the problem is to visit the ASC. Note that it is possible to repair or replace Touch ID only in authorized service centers that are able to “bind” the new fingerprint scanner to the old hardware.

Attention! Until December 6, everyone can get Xiaomi Mi Band 5 for free in just 3 minutes.

Join us at Go o g l e News. YouTube and RSS to keep abreast of the latest news from the world of future technologies.

No network when roaming

It often happens that the iPhone loses the network of the cellular operator abroad when using the roaming service. The most likely solution to this problem is to switch the smartphone from 4G to 3G mode. The fact is that mobile operators, for the most part, do not provide services abroad in LTE networks. Plus, owners of the latest iPhone XR, XS, and XS Max often complain about network issues when using 4G mode. Therefore, it will be advisable to switch to a third generation network. This can be done in the menu “Settings”. “Cellular”. “Voice and data”.

If this does not help, then you can do the following:

  • turn the device off and on again;
  • take out and insert the SIM-card again;
  • reset network settings in the “Settings”. “General”. “Reset” menu;
  • update to the latest software version;
  • reset your smartphone to factory settings;
  • update the settings of the mobile operator in the “Settings”. “General”. “About this device” menu when Wi-Fi is on.

It may also be that the mobile Internet does not work in roaming. In such cases, you need:

  • go to “Settings”;
  • go to the “Cellular” submenu;
  • find the menu item “Data parameters”;
  • move the slider “Data roaming” to the active position.

If none of the above worked and the smartphone still shows that the network is unavailable, then you should contact the technical support of the operator for help.

Another reason the iPhone cannot find the network is that the cellular operator does not provide its services in the region. That is, it happens that when entering an area where the coverage of a telecom operator is absent, the network disappears, and leaving it does not appear. In some cases, this can be corrected by activating the “Airplane” mode for a while or by turning the device off and on again. This will help reboot the frozen network.

Why the iPhone does not see the network?

Apple makes one of the best smartphones out there. iPhone. But even he sometimes fails his owners. There are times when “Search” or “No network” is written on the phone screen instead of the operator’s logo. Questions about why the network disappeared on a smartphone most often come from owners of iPhone models 4, 5, 6, 7, 8, X, less often. XR, XS, XS Max.

What could be the reason for this? What if the smartphone does not catch or is constantly looking for the network? Does this mean that something is wrong with the device and it is broken? In this article, we will try to figure out why this is happening, consider the most likely causes of such a problem and offer options for solving it on the iPhone.

No network after flashing, iOS update, factory reset

Sometimes it happens that after repairing the device, updating the operating system, flashing or resetting to factory settings, the iPhone loses the network, and the operator’s logo does not appear on its display. Instead, you can see “Searching” or “No network” on the screen. This is especially true for iPhone models 7 and 8, as well as earlier. 4, 5 and 6. The first thing to do in such cases is to make sure that the SIM card is working properly. To do this, you just need to install it in any other phone.

If the SIM card is working, but the problem remains, you should pay attention to the correct time display on the device display. If the current date and time is displayed incorrectly, which happens quite often after repairing a smartphone in a service center, as well as after self-flashing or updating, you must perform the following steps:

  • connect to Wi-Fi;
  • go to the “Settings” menu item;
  • in the submenu “General” find “Date and time”;
  • move the “Automatic” slider to the active state;
  • if this item is active by default, deactivate and reactivate the slider;
  • restart smartphone.

It should be remembered that the phone must be connected to a Wi-Fi network without fail, otherwise no changes will occur to the cellular network.

If there is no access point nearby, you can create a Wi-Fi connection using a second iPhone that has access to the mobile Internet. This can be done as follows:

  • enter the “Settings” menu and go to the “Cellular” menu;
  • click on the item “Cellular data network”;
  • go to the “Modem mode” section;
  • enter the network identifier in the APN field, which can be found in the technical support of your operator;
  • the fields “Username” and “Password” are optional;
  • return to the “Cellular” submenu and switch the “Modem mode” slider to active state.

After these manipulations, the gadget will begin to “distribute” the Internet.

Signs of damage to the modem or antenna

It is not uncommon for the iPhone to stop seeing the network due to damage to the antenna or modem part. This can happen due to the impact of the smartphone, ingress of moisture and subsequent oxidation of the board. Also, this may be due to poor-quality repairs or non-original cheap parts. There are such breakdowns in the iPhone 4, 5, 6, 7 and 8 series, as well as in the iPhone X.

To check if there really is a problem with the modem, you need to:

  • go to “Settings” and go to the “General” submenu;
  • click the “About this device” menu;
  • find the field “Modem firmware”.

If it is empty, then the modem really has damage, which can only be repaired at a service center. This is a rather difficult and painstaking work and it is impossible to carry out it yourself, without the help of a qualified master.

An antenna malfunction can be judged by the appearance of the phone: if the gadget falls, gets damaged, it is quite possible that the antenna is out of order. In addition, an inoperative Bluetooth or Wi-Fi can also talk about damage to the antenna. Such damage should also be repaired only by an authorized service center.

Loss of network after replacing the SIM card

There are also cases when the iPhone does not see the network after replacing the SIM card. Such a problem, like the previous ones, can occur in absolutely any model. If this happens, then the first thing to do is to get out and examine the SIM card. It can deteriorate when trimmed by yourself, when water gets on it, or for some other reason. In the event that it is damaged, it will have to be replaced with a new one. The operability of the card can be checked by inserting it into another smartphone.

In some cases, it helps to simply pull out the card and put it back in again. It happens that the network simply “glitches”, and such a simple procedure can restart it. Also, as in the previous cases, you can try to turn off and then turn on the smartphone, or several times to activate and deactivate the “Airplane” mode.

Network disappeared after Jailbreak

Sometimes the iPhone network gets lost after jailbreak. This is especially true for those models that were originally locked for a specific telecom operator. In such cases, it is best to take the phone to a service center, where it will be unlocked by IMEI. However, this procedure can take several days, depending on which operator the smartphone is blocked by.

How to avoid future network problems

Table of Contents