Iphone

IPhone 6 won’t turn on what to do

Breakdown reasons

The performance of a complex device depends on many factors. Even a minor hardware or software problem affects the smartphone’s performance. It is important to correctly establish the reason why the iPhone 6 does not turn on, and this article will help. Let’s start with the most common.

6th iPhone hardware problems

The “hardware” of a smartphone can break even without good reason in the form of a blow or a fall. just because of age. Contacts are gradually thinning and breaking off, loops are frayed. The humid air gradually “burns out” the conductive tracks on the motherboard. It can take a long time to list the internal elements and possible options for their failure. There is only one verdict. it is only possible to diagnose and establish why the iPhone 6 does not turn on in a service center.

IPhone 6 / 6S won’t turn on. what to do?

It’s unpleasant when, yesterday, a normally working iPhone suddenly went out and refuses to turn on. While this is a serious excuse for some to switch to a new device, most owners are not willing to spend money on another phone. We will help you find the source of this behavior of the gadget and tell you how to turn on the iPhone 6 if it turns off and does not turn on. With hardware problems, it is better to contact the service center, but you can fix the software problems yourself. The article tells about the signs by which you can understand why the iPhone 6 turned off and does not turn on, what to do in case of certain hardware problems, and how to turn on the iPhone 6 in cases of software failure.

Battery problems

When the age of the battery reaches two to three years, the destruction of the internal cells of the battery accelerates and the battery begins to quickly lose charge, and then finally fails. Similar symptoms appear due to a breakdown of the power controller, but in such cases the process is much faster, while the battery loses its performance for a long time. Also, a strong heating of the back cover of the phone in the area of ​​the battery indicates a breakdown of the battery.

Stuck loading screen

Another common problem is a failure during the boot phase of the operating system. This is manifested by freezing when the phone is turned on. The screen remains black or the Apple logo lights up, but then either no action takes place, or after a while the device turns off. This happens especially often after updating the smartphone’s firmware, or if the process was interrupted by an error. In this case, rolling back through iTunes to the latest working version will help.

IPhone 6 won’t turn on. completely black screen and nothing changes

The most common case of an iPhone inoperative. The screen does not want to light up in any way, and regardless of your actions, there is no reaction to them. The most likely explanation for this fact is a completely dead battery or a dead axle. First, we will discuss the first option, we will discuss the second explanation of this behavior of the gadget a little later. What measures should be taken if the iPhone 6 does not turn on or another modification?

Maybe you live in a cold area, and the winter is very harsh in your area. In this case, a very likely explanation for the inoperative state of the phone is too cold temperature. Do not be surprised, because of the cold weather, Apple devices often stop responding to taps and turn out to be faulty for a while. Place the gadget in a warm temperature and proceed to step

Connect the charger to the device and wait at least 15 minutes. If we determined the diagnosis correctly and were not mistaken with the cause, the device activates itself after a short time. Otherwise, proceed to the next step.

Hold down the Home and Power keys at the same time. Do not release the keys for 15-20 seconds, namely until a glowing apple appears on the display of the device. After that, the keys can be released. Finally, wait approximately 1 minute until iOS is fully launched.

It happens that before referring to a step, it is necessary to activate / deactivate the silent-mode switch several times at regular intervals. In part, if the simultaneous pressing of two keys (HOME and POWER) did not bring the expected result, such a measure of the way to bring the effect we need.

In the case when none of the above measures has had the desired result, and the iPhone 6 still does not turn on, the explanation may be as follows: one of the components of the smart simply failed. The cable for charging the device could also break, or the charging itself turned out to be faulty. It’s worth trying to charge your phone with a different charger.

A program running on an iPhone freezes while running

It may happen that the application on the iPhone 6 stops launching and freezes. In these conditions, it is necessary to close it forcibly and unload the application from the phone’s memory. To forcibly close the application, we carry out the following sequence of actions: double-click on the Home button, and then swipe up to minimize the problematic task.

IPhone 6 does not turn on. Smart does not respond to tap buttons

From time to time, the following happens: the gadget stops activating and responding to any button presses. In addition, the screen in a suspended state displays a screenshot of the last program that you launched, but it does not work to close it. If you find yourself in just such circumstances, perform a hard-reset of the smart. To bring it into effect, keep the Home and Power keys pressed for 10 seconds, and you will get the desired effect of the reboot.

IPhone 6 won’t turn on. what to do?

And the iPhone is a rather elegant thing, and perhaps the moment has come when the device simply does not have any effect on keystrokes and is not activated. There may be a million explanations for this, but everything has its own reasons, everything can be explained in some way. Maybe you accidentally sat on top of it while the phone was in the back of your pants, or there was a heavy downpour and it got wet. Of course, if the smartphone drowned in a bathtub, where water was poured to the top, or fell on solid ground from the balcony, it will hardly be possible to solve the problem on its own, and in any case, you will have to visit the service center. But if no such critical actions were taken with the device, there is a 90 percent chance that we will have a chance to return the gadget to work on our own. The main thing we need to do is to take into account the signs given by the apparatus, and use them with benefit and arrangement to correct the situation in our favor.

IPhone 6 won’t turn on. the display shows an apple all the time

It may happen that Smart does not respond to user actions, an apple appears and disappears on the screen again, and this behavior takes place to be constant. Usually, the explanation for this behavior of the phone is an incorrect iOS update, a crooked jailbreak, or a small glitch in the process of restoring a backup copy (in other words, a backup) of the device. If it may seem to you that the days of the device are already numbered, do not rush to draw such global conclusions. In response, let’s try to bring it back to life, in particular by running recovery-mode. So, if iPhone won’t turn on, what to do?

Launch iTunes on your computer and plug the USB cable into a free PC port (there is no need to connect the cable to the smartphone itself)

Turn off the power of the device while holding down the Home Power buttons

Keeping the Home button pressed, connect the USB cable to the device

Hold down the Home key until the iTunes logo and an image with a plug appear on the device screen

A message will appear on the PC display notifying you that the device is in recovery-mode

Then tap the “Restore” button. Next, it is worth waiting for a certain period: until the device is restored to default settings, the latest version of iOS will be downloaded to the computer. During the boot process, Smart will simply lie with a dark screen and not respond to button presses. Even if your network connection is stable and fast enough, the download may take up to 30 minutes or longer. If your Internet connection is not very fast, the process may not end at all. So you should first take care of the reliability of the Wi-Fi connection.

Now you know what to do if iPhone 6 or earlier won’t turn on. We hope that this article will become a guide for you to restore the device to work if it looks faulty, and it will take you quite a bit of time, and it will not cost you any financial costs.

Check the battery

How to turn on the phone if it does not turn on and does not charge with any charger? In this case, it is worth checking if the battery is connected correctly. Remember. have you dropped your device lately? If dropped, the cover could be damaged, which presses the battery to the contacts. This is especially true for older models with removable batteries, which are not very securely fixed in the case.

If the phone has not been dropped and the battery shows no signs of damage, try restarting or resetting the gadget to factory settings.

Why the phone won’t turn on and what to do about it: 6 tips

We figure out what to do if the phone does not turn on, and find out the most common causes of the problem.

Sometimes smartphones get into trouble. For example, if the phone falls down and does not turn on. what to do in this case? It is even worse if the gadget did not fall and generally worked fine, and now it charges, but does not turn on. Fortunately, you can fix many issues yourself by resetting your smartphone to factory settings or by updating your charger. We will tell you more about what actions you need to take if the device does not respond to pressing the power button.

Reboot your smartphone

What to do if your Android phone or iPhone won’t turn on? If you have tried all the methods, you can turn to another one. forced reboot. Perhaps the gadget has turned off and does not want to work due to the last installed application or a firmware update that caused the system to crash. The smartphone could simply freeze and stop responding to button presses. making it seem to the user that it will not turn on.

iphone, turn

To restart an old iPhone (up to the sixth line), you must simultaneously press and hold the Sleep / Wake and Home keys until the Apple logo appears on the display. On iPhones of the seventh series, it is worth using a different combination: the side power and volume down buttons. IPhone 8, iPhone 8 Plus, iPhone SE, and all new devices without a Home button reboot with the following combination:

  • press the volume down and then volume up one by one;
  • press and hold the side button.

Android devices usually do not require such tambourine dances. they can be rebooted with a long press of the power button. However, some models use a key combination for a forced restart: “Volume Up” “Power on” or “Down” “Power on”. Try different options if necessary.

Dry the device

If your smartphone stops working after you drop it into water or get caught in the rain, most likely it’s all about moisture that has got inside the case. over, if the gadget does not have water resistance, which would help it survive swimming.

In this case, you need to open the cover of the device, remove the SIM card and memory card, wipe all parts with a dry cloth and leave to dry disassembled. We do not recommend drying the apparatus with a hairdryer or hiding in rice.

For more information on what to do if you dropped your smartphone into the water, we talked about it in a separate article. It also happens that even IP68 certified devices “sink”. We figured out if they can be repaired under warranty:

Recharge your smartphone

The most common reason why the phone turned off and won’t turn on is a banal battery drain. If the smartphone has not been dropped in water or exposed to extremely low or high temperatures, it can be immediately connected to the charger. Just in case, check different sockets and chargers. perhaps the adapter or cable that you use with your smartphone is out of order.

Warm up or cool down the smartphone

Sometimes your phone won’t turn on or charge due to unfavorable temperatures, for example, if you’ve been out in the cold for a long time or left your device in the sun on a hot day. In the first case, he could pass out due to the cold. some phones still do not tolerate low temperatures, especially iPhones. In the second scenario, the battery will not charge until it cools down. this is necessary to protect the device from overheating.

Try to warm up or, conversely, cool the phone to room temperature. To do this, you do not need to use a refrigerator or put it on a battery. just leave the gadget in a room with a constant climate and wait a little. If the failure was related to the temperature regime, then the smartphone should quickly recover and start charging. This usually takes no more than half an hour. If it still does not turn on, try other methods from our material.

iphone, turn

Reset smartphone to factory settings

Any malfunction can be rectified by restoring the factory settings. However, this option should only be used as a last resort, since when you reset the device to the factory, you will lose all the data that was stored on it. If the information could not be saved somewhere else, it is better to turn to less stringent methods.

Nevertheless, even a person far from technology can reset a smartphone to factory settings. We have made detailed instructions to help you restore the parameters of devices on Android and iOS.

If, after all the manipulations, the smartphone still does not turn on, contact the manufacturer’s service center. perhaps they will repair it under warranty.

IPhone problem: shut down and won’t turn on

The iPhone has turned off and does not turn on, what to do. this is the question many owners of Apple smartphones are asking themselves when faced with an unpleasant situation. A device’s reluctance to turn on is not necessarily an indication of a serious hardware failure that will require costly repairs to fix. In some cases, the problem is caused by a software glitch that you can fix yourself.

iphone, turn

Disconnecting iPhone during a call: finding and fixing the cause

Inclusion methods

Before attempting the troubleshooting steps below, check for two factors that have nothing to do with failure, software or hardware. The first factor is the charge level of the device. If the battery is discharged, then the phone could well turn off on its own and not turn on again. Connect iPhone to charger and wait 15 minutes, then try turning on your smartphone again.

If a fully charged iPhone turns off, check the second factor. switching to save mode. It can happen if you rarely restart your phone. To get the smartphone out of this state, perform a hard reboot.

  • Press and hold the Power and Home buttons for 15-20 seconds (relevant for all models released before the iPhone 7).
  • Hold down the Power button and the Volume Down key for 15-20 seconds (for iPhone 7 and 7 Plus).

After the logo appears, the phone will turn on and start working without errors. If there is no positive result, proceed to diagnose the device.

iPhone turns on and off immediately: how to restore a smartphone

How to turn on on iPhone 6?

If iPhone is off, hold the Power button until the Apple logo appears on the screen to turn it on. If iPhone is in sleep mode, press the Lock button or Home button and then slide the screen from left to right to unlock the phone.

What to do if iPhone is frozen on apple?

How to Hard Reset iPhone without Button

  • Press the volume up button and release it.
  • Also press the volume down key.
  • Hold the power button and hold it until the screen goes out (the Apple logo disappears), and the device starts to reboot.

What to do if iPhone 11 won’t turn on?

If the iPhone does not respond to taps and the application does not close, then you need to force restart the iPhone. To do this, hold down and hold the Home and Power keys for 15-20 seconds until the display turns off and the smartphone restarts.

Why the iPhone does not turn on the apple is burning?

The main root cause of the problem, if an apple is on on the iPhone, the phone does not turn on, is a banal lack of energy for the smartphone, since the iPhone battery has a very low percentage of charge. In this case, after restarting the smartphone, it is quite possible to face such a situation.

How to Get Out of iPhone Recovery Mode?

How to Get iPhone Out of Recovery Mode with RecBoot

  • Connect iPhone in recovery loop to computer and launch RecBoot.
  • After the utility recognizes the connected device, click on the “Exit Recovery” button.
  • Wait for the device to reboot.

How long does it take to turn on an iPhone after being completely discharged?

How long does it take to charge an iPhone? Average charging timeiPhone 4, 4S, 51 hours 40 minutesiPhone 5S, 5C1 hour 50 minutesiPhone 5SE, 6, 6S2 hours 10 minutesiPhone 6 Plus, 6S Plus3 hours 30 minutes 12 lines

How to turn on iPhone 6 for the first time?

What to do to turn on the iPhone 6s in this case? Press and hold the Power and Home buttons at the same time for 15-20 seconds. The smartphone should turn on.

Why and how to decide

There are a lot of reasons why the iPhone 6 turned off and won’t turn on.

Enlarged, they can be divided into the following:

  • complete discharge of the apparatus;
  • software problems;
  • hardware problems.

Software problems are easier to solve, in a situation with hardware problems, the solution is more complex and expensive.

Fill with liquid

Moisture on the phone or even flooding it with liquid is not uncommon. IPhone problems can begin not only when drowning it in a pond, but even when exposed to light rain. In this situation, the gadget may start to fail.

In this case, cleaning the device or component repair of the motherboard is highly desirable. In this case, it is important to stop using the phone immediately if moisture gets inside the device.

The solution to the problem is not entirely trivial, so it is recommended to seek help from a certified service center and avoid problems that may arise in the future.

Power and charging problem

If your iPhone 6 can’t turn on, it’s likely a power or charging problem. First of all, you should try to charge it. over, you need to connect it to the charger for at least 20 minutes from the adapter and 30 minutes from the workstation.

After that, you need to try to start the iPhone without disconnecting from charging. If everything is normal, the display will show a lightning symbol inside the discharged battery.

When the battery of an Apple smartphone is discharged to zero, after a short charge, when you press the power button, the display shows a picture showing a socket with a lightning symbol.

The way out of this situation is to charge the device for a longer time. In this case, the charging time must be at least 3 hours.

There are situations when the connector through which the phone is charged fails when using non-original charging.

It is very important to know how you can safely charge your iPhone 6 in your car, and even more important to follow these basic rules. This leads to dire consequences. At best, the iPhone battery needs to be replaced. At worst, it is replacing the power controller or repairing a failed power circuit.

How to create an email on Yandex for free? The answer is here.

The device connector is clogged with dust and dirt, and the next time you try to charge it, the iPhone just breaks. This problem is not very serious, since any service center can fix it in a few minutes for little money.

What to do, iPhone 6 won’t turn on

Unfortunately, even with such a high-tech and reliable device like the iPhone 6 Plus, an unpleasant situation can happen.

Violation of operating conditions, an absurd accident, and sometimes a factory defect, can cause a smartphone to fail. One of the most common problems is the situation when the device does not respond to pressing the “Power” key.

Sooner or later, most iPhone users face this question. The problem related to the inability to turn on the iPhone. quite common. Each generation of iPhones has its own characteristics of this problem. The first thing to do is connect your iPhone 6 to the original charger.

Most often, the culprit of the breakdown is the “Power” button itself, which has a damaged contact pad or cable. The reason most often lies in the ingress of moisture into the case or in mechanical damage to the part caused by the phone falling. Also, quite often the refusal of the smartphone to turn on is due to a serious malfunction in the software or failure of the power system controller.

Software glitch

The most common reason iPhone won’t start is a software glitch. To eliminate a software failure, you must do a hard reset of the device. To do this, simultaneously press and hold the power key and the Home key for 15 seconds. As a result, the device will reboot and will be available for normal operation.

If this does not help, then you need to try to put the device into recovery mode. To do this, hold down the “Power” and “Home” buttons for 30 seconds.

In a situation where such an elementary solution to the problem, together with a thorough charging of the battery, did not solve the problem, perhaps the reason for the non-working device is as follows:

the battery of the gadget is faulty (it needs to be replaced with a new one);

damaged adapter or USB-cable (you need to replace the adapter or USB-cable);

the cable connector is dirty (it is necessary to clean the cable connector);

low-quality (cheap) cable (replace it with the original one);

mechanical damage to the connector and other mechanical damage, for example, when dropped, wet, after charging in a car, etc. (you need to contact the service center);

marriage (you must contact the place of purchase).

It is also possible that the iPhone may not turn on after a firmware update.

There are three different scenarios, depending on when the failure occurred during the firmware update:

replace the faulty NAND Flash. This is a memory chip that stores all the owner’s personal data;

replace the failed Nor Flash. This is the memory chip of the GSM module. All parameters of mobile operators are stored there. Without these parameters, the device will not be able to call.

What to do, iPhone 6 won’t turn on

Unfortunately, even with such a high-tech and reliable device like the iPhone 6 Plus, an unpleasant situation can happen.

Violation of operating conditions, an absurd accident, and sometimes a factory defect, can cause a smartphone to fail. One of the most common problems is the situation when the device does not respond to pressing the “Power” key.

Sooner or later, most iPhone users face this question. The problem related to the inability to turn on the iPhone. quite common. Each generation of iPhones has its own characteristics of this problem. The first thing to do is connect your iPhone 6 to the original charger.

Most often, the culprit of the breakdown is the “Power” button itself, which has a damaged contact pad or cable. The reason most often lies in the ingress of moisture into the case or in mechanical damage to the part caused by the phone falling. Also, quite often the refusal of the smartphone to turn on is due to a serious malfunction in the software or failure of the power system controller.

In this case, cleaning the device or component repair of the motherboard is highly desirable. In this case, it is important to stop using the phone immediately if moisture gets inside the device.

The solution to the problem is not entirely trivial, so it is recommended to seek help from a certified service center and avoid problems that may arise in the future.

iPhone 6 could

In addition to battery problems, the iPhone not turning on can be attributed to human error. This is especially common when the phone is carried in a trouser

The device connector is clogged with dust and dirt, and the next time you try to charge it, the iPhone just breaks. This problem is not very serious, since any service center can fix it in a few minutes for little money.

Why and how to decide

There are a lot of reasons why the iPhone 6 turned off and won’t turn on.

Enlarged, they can be divided into the following:

Software problems are easier to solve, in a situation with hardware problems, the solution is more complex and expensive.

Hardware malfunction

But when none of the above scenarios helped, then with a high degree of probability you can look for the reason in the “hardware”. This can happen after moisture gets inside or the elements of the gadget naturally age. This is caused by non-original cords and cables, as well as failure of connectors. In no case should you try to open the case with your own hands if you have no experience and knowledge of carrying out such work.

Physical damage

Often, after such a serious repair is required and a regular restart will fail to “revive” the iPhone. Mechanical breakdowns are usually very difficult to repair, often accompanied by a complete replacement of individual units and / or housing. As a rule, only specialists of service centers are engaged in such repairs. The body itself can be examined for microcracks, chips and other scratches. You can also check if the plume has come off and if water has got inside. In addition, it should be remembered that the warranty will not apply in such cases. If there is no experience with microcircuits and equipment for soldering, there is nothing to try to disassemble an ingenious smartphone.

After drowning

Contact with any moisture is destructive for all electronic devices, including such complex ones as modern telephones. First of all, contacts, as well as conductive paths inside the case, oxidize and rust. It is best not to turn on the iPhone itself, but to contact the service center after drying. They will deal with the restoration of conductive paths on the motherboard, as well as contacts that have been badly damaged by oxidation.

Application hung

Not an uncommon case, especially when it comes to third-party, not proprietary applications. You will probably have to hard reset your phone. At the same time, we clamp the homepower buttons. We expect the application to be disabled, but continue to hold down the keys until the manufacturer’s corporate logo appears.

If the buttons do not work

There is also the following option: the iPhone does not respond to button presses, and the screen of the last application is frozen on the screen. The first thing to do in this situation is to force restart the device. To do this, simultaneously hold down the “Sleep” / “Wake up” and “Home” buttons and after ten to fifteen seconds you will see that the apple is on the screen again.

It happens that the device still does not turn on. Then you should connect to the charger and leave the iPhone charging for fifty to sixty minutes. You will soon see that the charging screen is on. If this does not happen, check carefully the connector socket, charger and cable. Perhaps the reason is in them. Try the same procedure using a different source of battery power.

If the iPhone does not turn on, but the apple is constantly on

Another unpleasant situation that often occurs among users of the iPhone 4S, iPhone 5S. an apple is on and off on the screen. In this case, do not test the strength of your nervous system. Most likely, there was a failure restoring iPhone from backup. What should be done in this situation? The recovery mode and the computer on which you first need to run iTunes will help you. Then connect the USB cable, but for now only to the computer. Your next action is to turn off the iPhone completely, getting rid of the apple, which is still on and off. To do this, you need to hold down the “HOME” and “POWER” buttons. Next, hold down “HOME” and connect the USB. This should be done until the iTunes logo appears on the screen and the image of a plug next to it. You will see an inscription on the screen that the recovery mode is working. All you need to do in the future is to click the “Restore” button.

Let’s see what other reasons for the non-working iPhone exist, and also immediately suggest solutions.

After replacing the display

Typically, this situation occurs precisely when the owner of the iPhone decided to change the display himself or gave it to an artisanal craftsman. It is enough to hook something involuntarily in the process of opening or assembly, and the supply contact may move away. It is better to give the device to an experienced service technician.

Viruses

They quite often end up in modern iPhones, causing them to refuse to turn on. This is often the case for users who spend a lot of time on unverified Internet sites. You yourself may not be able to get rid of the malicious media, but in a specialized center they will definitely help. In the future, it makes sense to install antivirus software on the smartphone, if this has not been done so far. Fighting telephone viruses on your own is even more difficult than fighting computer viruses. However, professionals can easily help get rid of this problem.

TURBION.NET 2021