Iphone

iPhone 6 does not pick up the network well

iPhone does not catch WI-FI well

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

The fact that the iPhone does not catch Wi-Fi well is faced by many users. Often, the ways to solve the problem are quite simple, you can eliminate the cause of the weak signal yourself. The main thing is to pay attention to the situation in a timely manner and determine the type of malfunction, as well as a way to eliminate it.

Signs of defective Wi-Fi on iPhone

If your device has a poor view of the wireless network or the Wi-Fi connection does not work completely, you will face a number of inconveniences.

The main signs that the iPhone is poorly picking up Wi-Fi are as follows:

  • a smartphone at a long distance began to catch the network poorly
  • the gadget only catches the network at a short distance
  • the device does not catch the network (the antenna does not see the network)
  • internet works intermittently

If you find one of the listed symptoms while the device is working, you can try to fix the problem yourself.

Troubleshooting methods

Before trying to troubleshoot, check your network settings and back up your data by connecting to mobile internet.

If you’ve decided to fix problems with a weak Wi-Fi signal on your iPhone or a complete lack of access to a wireless network on your own, try the following steps in sequence:

  • check the settings of the router (access point at home)
  • reboot the router
  • hard reset your iPhone
  • select the settings for the wireless connection to your access point
  • turn on the wifi module and connect to the network
  • do a factory reset
  • disable location services for the wireless network
  • install the latest iPhone firmware

If the software update did not help, the smartphone has become worse in seeing the network far away or does not catch the network even at a short distance from the Wi-Fi antenna at home, the function of searching for wireless networks does not work, try rolling back the operating system to the previous firmware version.

When it becomes clear that the device does not catch the wireless network well due to the breakdown of internal elements (for example, a Wi-Fi module), it is necessary to replace the spare part. If you are unable to restore the device’s functionality on your own, entrust the maintenance of your smartphone to experienced specialists.

The most common causes of a weak Wi-Fi signal

Apple equipment is rightfully considered to be of very high quality, however, even new iPhones can fail. It is far from a rare type of malfunction that the Internet is working slowly or the smartphone has become poorly caught.

The reasons why the iPhone has become worse in catching the network or does not see it at all can be quite varied:

  • incorrect router configuration
  • faulty Wi-Fi module
  • software malfunction

To determine the problem, check your wireless network settings and try to reboot your device.

Apple Professional Service

On the YouDo site, you can easily find a certified iPhone service technician. A qualified specialist will go to the specified address at a convenient time for you. The wizard will thoroughly diagnose the device, check if the network settings are correct and restore Wi-Fi to work.

It is beneficial to use the services of Yudu contractors to service Apple equipment for many reasons:

  • masters install only high-quality spare parts and original software
  • repair work is carried out using special equipment, which the specialist brings with him
  • iPhone repair will be performed in your presence, so you can be sure of the safety of your personal information
  • experienced specialists maintain Apple equipment at a high professional level and provide a long-term warranty for all types of work performed

Apple Iphone 6: Wifi Issue Fixes. Fliptroniks.com

A qualified technician will quickly find out why the iPhone is poorly catching Wi-Fi, and in a short time will eliminate the malfunction.

Loss of network after replacing the SIM card

There are also cases when the iPhone does not see the network after replacing the SIM card. Such a problem, like the previous ones, can occur in absolutely any model. If this happens, then the first thing to do is to get out and examine the SIM card. It can deteriorate when trimmed by yourself, when water gets on it, or for some other reason. In the event that it is damaged, it will have to be replaced with a new one. The operability of the card can be checked by inserting it into another smartphone.

In some cases, it helps to simply pull out the card and put it back in again. It happens that the network simply “glitches”, and such a simple procedure can restart it. Also, as in the previous cases, you can try to turn off and then turn on the smartphone, or several times to activate and deactivate the “Airplane” mode.

Why the iPhone does not see the network?

Apple makes one of the best smartphones out there. iPhone. But even he sometimes fails his owners. There are times when “Search” or “No network” is written on the phone screen instead of the operator’s logo. Questions about why the network disappeared on a smartphone most often come from owners of iPhone models 4, 5, 6, 7, 8, X, less often. XR, XS, XS Max.

iphone, does, pick, network

What could be the reason for this? What if the smartphone does not catch or is constantly looking for the network? Does this mean that something is wrong with the device and it is broken? In this article, we will try to figure out why this is happening, consider the most likely causes of such a problem and offer options for solving it on the iPhone.

No network after flashing, iOS update, factory reset

Sometimes it happens that after repairing the device, updating the operating system, flashing or resetting to factory settings, the iPhone loses the network, and the operator’s logo does not appear on its display. Instead, you can see “Searching” or “No network” on the screen. This is especially true for iPhone models 7 and 8, as well as earlier. 4, 5 and 6. The first thing to do in such cases is to make sure that the SIM card is working properly. To do this, you just need to install it in any other phone.

If the SIM card is working, but the problem remains, you should pay attention to the correct time display on the device display. If the current date and time is displayed incorrectly, which happens quite often after repairing a smartphone in a service center, as well as after self-flashing or updating, you must perform the following steps:

  • connect to Wi-Fi;
  • go to the “Settings” menu item;
  • in the submenu “General” find “Date and time”;
  • move the “Automatic” slider to the active state;
  • if this item is active by default, deactivate and reactivate the slider;
  • restart smartphone.

It should be remembered that the phone must be connected to a Wi-Fi network without fail, otherwise no changes will occur to the cellular network.

If there is no access point nearby, you can create a Wi-Fi connection using a second iPhone that has access to the mobile Internet. This can be done as follows:

iPhone 6: Fix Signal Dropping / No Service / SOS Only / Searching Problem

  • enter the “Settings” menu and go to the “Cellular” menu;
  • click on the item “Cellular data network”;
  • go to the “Modem mode” section;
  • enter the network identifier in the APN field, which can be found in the technical support of your operator;
  • the fields “Username” and “Password” are optional;
  • return to the “Cellular” submenu and switch the “Modem mode” slider to active state.

After these manipulations, the gadget will begin to “distribute” the Internet.

No network when roaming

It often happens that the iPhone loses the network of the cellular operator abroad when using the roaming service. The most likely solution to this problem is to switch the smartphone from 4G to 3G mode. The fact is that mobile operators, for the most part, do not provide services abroad in LTE networks. Plus, owners of the latest iPhone XR, XS, and XS Max often complain about network issues when using 4G mode. Therefore, it will be advisable to switch to a third generation network. This can be done in the menu “Settings”. “Cellular”. “Voice and data”.

If this does not help, then you can do the following:

  • turn the device off and on again;
  • take out and insert the SIM-card again;
  • reset network settings in the “Settings”. “General”. “Reset” menu;
  • update to the latest software version;
  • reset your smartphone to factory settings;
  • update the settings of the mobile operator in the menu “Settings”. “General”. “About this device” when Wi-Fi is on.

It may also be that the mobile Internet does not work in roaming. In such cases, you need:

  • go to “Settings”;
  • go to the “Cellular” submenu;
  • find the menu item “Data parameters”;
  • move the slider “Data roaming” to the active position.

If none of the above worked and the smartphone still shows that the network is unavailable, then you should contact the technical support of the operator for help.

Another reason the iPhone can’t find the network is that the mobile operator is not providing its services in the region. That is, it happens that when entering an area where the coverage of a telecom operator is absent, the network disappears, and leaving it does not appear. In some cases, this can be corrected by activating the “Airplane” mode for a while or by turning off and then turning on the device. This will help reboot the frozen network.

Signs of damage to the modem or antenna

It is not uncommon for the iPhone to stop seeing the network due to damage to the antenna or modem part. This can happen due to the impact of the smartphone, ingress of moisture and subsequent oxidation of the board. Also, this may be due to poor-quality repairs or non-original cheap parts. There are such breakdowns in the iPhone 4, 5, 6, 7 and 8 series, as well as in the iPhone X.

To check if there really is a problem with the modem, you need to:

  • go to “Settings” and go to the “General” submenu;
  • click the “About this device” menu;
  • find the field “Modem firmware”.

If it is empty, then the modem really has damage, which can only be repaired at a service center. This is a rather difficult and painstaking work and it is impossible to carry out it yourself, without the help of a qualified master.

An antenna malfunction can be judged by the appearance of the phone: if the gadget falls, gets damaged, it is quite possible that the antenna is out of order. In addition, an inoperative Bluetooth or Wi-Fi can also talk about damage to the antenna. Such damage should also be repaired only by an authorized service center.

Network disappeared after Jailbreak

Sometimes the iPhone network gets lost after jailbreak. This is especially true for those models that were originally locked for a specific telecom operator. In such cases, it is best to take the phone to a service center, where it will be unlocked by IMEI. However, this procedure can take several days, depending on which operator the smartphone is blocked by.

IOS crash

The ineffectiveness of the above measures tells the user that the problem may be in the software. For the gadget to work correctly, the latest system updates are required. To check if there are available updates, the user needs to follow the path “Settings”. “General”. “Software update”.

If, as a result of the verification, the iPhone finds newer software than is installed on the device, the user should download it. If there is nowhere to update further, you need to refer to the procedure for flashing the gadget. This procedure is simple and does not require contacting the service center. any user will be able to perform it with his own hand. To help a newbie, our article on flashing iPhone.

No operator support needed

If the iPhone 4, 5, 6 model does not catch the network, then there is a high probability that it only supports the settings of a certain operator. Often this can be found on non-activated models coming from the United States. These smartphones are tied to the ATT operator and without a special “unlock”, work in the territory of the former CIS will be impossible.

But if the activation did not bring the required results, then you will have to reset the settings. To do this, go to the “Basic parameters” and reset the communication parameters.

If the activation took place using the “SAMPrefs” program, then the process will not be able to go through automatically. To reset the settings, you will need:

  • Open “iTunes”.
  • Mobile must connect to computer.
  • Perform “backup” and restore.
  • After completing the recovery procedure, select the item “recognize as a new device”.

Problems with the settings of the cellular operator

If the time is set correctly, but the iPhone still does not catch the network, you can suspect that the settings of the cellular operator are lost. A set of such measures will help to solve this problem (each subsequent step must be performed only if the previous one did not work):

Turn airplane mode on and off. The corresponding slider is located at the very beginning of the “Settings” menu.

In the “Settings” go to the “Operator” section and deactivate the “Automatic” toggle switch.

Check if the cellular data settings are correct (APN, username, password). Follow the path “Settings”. “Cellular”. “Cellular data network”. The block “Cellular data” contains the necessary details.

You can find the correct parameters for the top 3 carriers in our article on how to set up Internet on iPhone. In case of mismatch, change the cellular data settings on the “apple” gadget manually. Remember to restart your device after changing the settings.

Rearranging the SIM card

Alternatively, try to rearrange the SIM card. There are situations when the contact tracks leave the SIM card and contact is lost, making authorization at the operator’s base station impossible. In this case, there is a “disappearance of the network”, all “sticks” disappear and only helps to

To do this, we will use a special paper clip from the box. We insert into the hole and lightly press, we leave the tray with microSim. We inspect and insert the structure back, being careful. Now we restart the device, in 40% of cases it will help.

Why the iPhone does not detect the network?

There are many prerequisites that lead to a smartphone malfunction. If the iPhone stops picking up the network, it means that one of the following reasons is present:

  • reset to factory settings
  • the device was flashed
  • iPhone was being repaired
  • the gadget has not been used for a long time
  • the time is wrong

Sometimes iPhone won’t find the network when exposed to inclement weather and incorrect software settings.

After updating the device, you need to check the cellular settings to make sure that all functions are available, the iPhone sees the SIM card and catches the network well.

Problems with 3G

The signal may disappear due to the influence of 3G, which blocks access to the voice communication channel and the device starts to catch the signal poorly. First you need to check the settings, if they are entered incorrectly, then the problem may be eliminated by resetting the parameters.

Often times, this method only works for a short time. To completely fix the cell phone, it will have to be referred to specialists to carry out work on flashing the phone. It is not recommended to carry out this procedure on your own, since if an error is made during the process, the iPhone will turn into a “brick”.

Weak GSM signal

If the reason for the weak signal is that the user’s place of residence is not within the GSM coverage area, the problem cannot be corrected on your own. You will have to buy a SIM card for temporary use. Although, in fact, the territory where there is absolutely no GSM signal, you still need to look.

There are also areas where the signal is very poor in large cities. As a rule, iPhones are not caught in the subway, basements, elevators. The network can disappear inside the building due to the fact that the concrete walls of the room jam the GSM signal. In some buildings, jammers are deliberately used to prevent employees from becoming too enthusiastic about Internet surfing. The “jammers” look like this:

Previously, “jammers” were willingly placed in educational institutions. Now the use of such devices has been reduced to a minimum. the modern educational process involves the active appeal of the student to the mobile Internet.

If the GSM signal is weakened in the user’s home, this is a reason to file a claim with the service provider. The iPhone owner needs to call the hot line mowing number and complain about the lack of network. The application will be forwarded to the technical department, whose employees will make every effort to solve the problem.

Search for updates

Your iPhone may not pick up a signal due to the fact that you have not installed the latest updates for the system. they are necessary for the gadget to work correctly. Go to the item “About this device”, if you see that there are new system files for the iPhone, connect to the Internet and start the update process.

Note. If for one reason or another you are unable to connect to the Internet from your phone, connect it to your computer, go to iTunes, start the search for updates and install them.

What to do if Wi-Fi is not working well on iPhone 6 / 6s / Plus?

This issue is common with some iPhone models. However, it was noted that it is the owners of the iPhone 6 who most often complain about the fact that their device does not pick up Wi-Fi well.

Here are the main symptoms of an iPhone with Wi-fi. Familiar?

  • The gadget only catches the network at a short distance;
  • iPhone does not catch the network (does not see it at all);
  • Internet is constantly interrupted.

In this article, we will consider all possible ways to solve the problem at home, from the simplest to the more sophisticated and complex.

What to do if the iPhone has a poor network connection? The way to solve the problem is as follows

What to do if the problem is with the router?

If, after checking the connection of other devices, it turns out that the router is to blame, the following options can help:

  • Restarting iPhone sometimes saves.
  • Reset the router settings using the “RESET” button. However, if you are unable to re-configure the device, it is better to consult the wizard.
  • Go to the router interface and change the region “Russia” to “America”.
  • Sometimes changing WPA2 / WPA to WEP helps. Of course, this is an old and unreliable encryption method, but in some cases it helps to restore the connection to the Wi-Fi network.

We solve the problem ourselves

Before “picking” the iPhone, first it is better to check for faults in the router itself. This is easy to do. Check how other devices work when connected to a Wi-Fi network. If the internet speed is stable and good, then the problem is not with the router, but with your iPhone.

iPhone 5/6/6s: No Service or Constantly Searching. 9 Possible Fixes!!

What to do? What measures should be taken if the iPhone 6 or iPad does not catch Wi-Fi well and stubbornly refuses to see the network?

Draw your attention to! If the iPad cannot connect to the network or does not see it, the solutions are the same as with iOS smartphones.

Reconnection

Sometimes you just need to reconnect to the network. To do this, you need to forget the network in “Settings”. “Wi-Fi” and reconnect to it.

Don’t forget to check if you wrote the security key correctly!

Force restart your phone

It is better to start with the most likely method. restarting the phone. It instantly clears some minor iOS software bugs. To restart the iPhone 6/6 s plus, you need to hold down only two buttons: “Power” and “Home” (for iPhone 7 / 7s plus. the volume down button).

complicated procedure for iPhone X (but similar to restarting the 8th iPhone). It is necessary to alternately press and immediately release the volume up / down buttons. Then, on the other hand, hold down and hold “Power” until the Apple logo appears.

Reconnection

Sometimes you just need to reconnect to the network. To do this, you need to forget the network in “Settings”. “Wi-Fi” and reconnect to it.

Don’t forget to check if you wrote the security key correctly!

Non-standard ways

  • You can try connecting to a faster DNS server. In the Wi-Fi settings, from the right edge of the screen, you need to click on the letter “i” and select the Google or OpenDNS server from the specified ones.
  • You can switch to another broadcasting channel. This helps in apartment buildings when many networks are connected to one channel. To do this, you really have to go to the router interface and change the channel yourself.
  • Installing a security key to your Wi-Fi network will also help. If the network is “not password protected”, that is, it is open, unauthorized users, for example, neighbors, can connect to it, which threatens with connection problems and a decrease in the data transfer rate.

We solve the problem ourselves

Before “picking” the iPhone, first it is better to check for faults in the router itself. This is easy to do. Check how other devices work when connected to a Wi-Fi network. If the internet speed is stable and good, then the problem is not with the router, but with your iPhone.

What to do? What measures should be taken if the iPhone 6 or iPad does not catch Wi-Fi well and stubbornly refuses to see the network?

Draw your attention to! If the iPad cannot connect to the network or does not see it, the solutions are the same as with iOS smartphones.

Firmware

Updating iPhone firmware to the latest version is one of the options for self-solving the problem.

Force restart your phone

The best place to start is with the most likely way to restart your phone. It instantly clears some minor iOS software bugs. To restart the iPhone 6/6 s plus, you need to hold down only two buttons: “Power” and “Home” (for iPhone 7 / 7s plus. the volume down button).

complicated procedure for iPhone X (but similar to restarting the 8th iPhone). It is necessary to alternately press and immediately release the volume up / down buttons. Then, on the other hand, hold down and hold “Power” until the Apple logo appears.

What to do if Wi-Fi is not working well on iPhone 6 / 6s / Plus?

This issue is common with some iPhone models. However, it was noted that it is the owners of the iPhone 6 who most often complain about the fact that their device does not pick up Wi-Fi well.

Here are the main symptoms of an iPhone with Wi-fi. Familiar?

  • The gadget only catches the network at a short distance;
  • iPhone does not catch the network (does not see it at all);
  • Internet is constantly interrupted.

In this article, we will consider all possible ways to solve the problem at home, from the simplest to the more sophisticated and complex.

What to do if the iPhone has a poor network connection? The way to solve the problem is as follows

TURBION.NET 2021