What to do if iPhone 13/12 hangs on apple?
One of the most common iPhone crashes is freezing on the Apple logo. If when you turn on or restart your phone, you see a white apple icon on the screen for a long enough time and nothing changes, it means that you are in this exact situation. Some users have also noted cases where the iPhone 12 hangs on the apple with a streak, like when you install a system update. These types of errors can occur as a result of a virus software download, due to a corrupted app or iOS update file, or after a system crash. In this article, we will break down in detail what you should do if your iPhone 12 hangs on apple, and provide step-by-step instructions for the best ways to solve this problem.
If your iPhone 12 hangs on apple and won’t shut down, the first thing to do (as with any phone malfunction) is to try rebooting the device. This simplest method is quite often effective and helps solve minor system or app errors. Since the standard shutdown procedure isn’t possible in this case, you need to perform a hard reset of the iPhone using the buttons on the case. So to force a restart of iPhone 12, follow these steps.
- Step 1： On your iPhone, press and immediately release the volume up button.
- Step 2： Then press and immediately release the volume down button.
- Step 3： Next, hold down the side button until the Apple logo appears, then release the side button and wait for the phone to boot up normally.
Check the charging adapter and USB cable
First of all, it is necessary to determine that the iPad does not turn on because of the charger adapter and cable. Of course this is actually the most likely cause that can lead to this problem.
It’s easy to tell if the problem is not with the charging adapter and cable. Try using a charging cable and adapter to charge other Apple devices. If you start charging, it means that the accessory is not damaged and you can move on to the next method.
iPhone hangs on apple. What to do
Different iPhones reboot differently
If your iPhone hangs on apple, the easiest way to help it get back up and running is to hard reset the iPhone. It is not complicated and no harm to the smartphone either:
- On iPhone 6s, 6s Plus, SE (2016) and older models, hold down the Home button and power key for about 10 seconds;
- On iPhone 7, 8, 8 Plus and SE (2020), hold down the volume down button and power key for about 10 seconds;
- On iPhone X and newer models, quickly press and release the volume up button, quickly press and release the volume down key, and then hold down the power key for 10 seconds.
How to restore iPhone via iTunes
Restoring your iPhone via iTunes is my least favorite manipulation. It involves resetting all iPhone settings and then rolling a backup on it:
- Launch Finder or iTunes on your Mac (depending on OS version);
- Connect your iPhone (iPad or iPod) to your Mac via cable;
- Put the connected device in recovery mode;
Remember that restoring via iTunes deletes all data
- In the pop-up window on your Mac, click “Restore.”
- Wait for the restore procedure to complete;
- Reactivate iPhone and roll backup.
iPhone hangs on apple. Why
The main thing in these situations is not to lose your head and start acting correctly
If your iPad or iPhone hangs on the apple logo, the most effective solution is to use the Tenorshare ReiBoot utility. Practice shows that its effectiveness in restoring the performance of the device is at the highest level. Unless the cause of the hang-up is a hardware problem.
You will need to take your iPhone to a service center for repair. However, in most cases, if the iPhone does not turn on and the apple is lit, ReiBoot copes 100%:
- Damage to the firmware component;
- Insufficient memory for iOS update;
- Insufficient memory to boot the system;
- Improper iOS update;
- Rolling back from a newer to an older version of the OS.
Why the iPad won’t boot up
This is usually accompanied by the following errors:
Failed to recover iPad [device name]. Unknown error occurred (9).
Failed to recover iPad [device name]. Unknown error occurred (4013).
This is one of the symptoms that your iPad‘s NAND flash memory is failing. The following signs are also indicative of this breakdown:
- Your iPad is dead, and won’t turn on;
- Software intervention (such as Jailbreak) has been performed;
- The iPad hangs “in apple” and can’t boot up.
Just such symptoms patient in the form of an iPad 9.7 of 2018 came to the Apple Pro Center. In this case, there is only one solution. replace the NAND flash memory on the iPad.
If the device still won’t turn on or won’t boot
Plug the device into a power source and leave it charging for about an hour.
After a few minutes the charging screen should appear.
If the charging screen does not appear within an hour or the “Connect Power Source” screen is displayed, check the connector, USB cable, and power adapter. Make sure that all connectors are securely connected, undamaged, and unclogged. Try another USB cable or power adapter.
If the device still does not turn on, find out what to do next.
Reflashing/Restoring iPhone, iPad
The second way to combat the “eternal daisy” or “endless white/black apple” will require a lot more work from you, but in this case you do not have to copy content from iTunes to iPhone, iPad, as in the first. There is also no guarantee of success, but you can try.
- Turn off your device and turn it on again;
- After a while, try calling your iPhone or sending an iMessage if it is an iPad;
- If the message / phone call went through. you can get access to the file system, if not. reflash / restore iPhone, iPad according to the instructions above.
How to Repair your iPad?
Restore iPhone, iPad, or iPod touch to iTunes on PC
- Connect your device to your computer. You can use USB or USB-C cable to connect the device, as well as connect it to Wi-Fi network
- In iTunes on your PC, click the device button at the top left of the iTunes window.
- Click “Review.
- Click “Restore” and follow the instructions on the screen.
Fix the iOS 15 problem without losing any data with Tenorshare ReiBoot
If the two options above don’t work for any reason, because the buttons don’t work, iPhone can’t enter recovery mode or DFU manually, you don’t have a previously saved backup, etc. д. There is a completely good tool. Tenorshare ReiBoot, developed by the Tenorshare team, allows you to restore an iPhone that’s hanging in apple with a few simple clicks, without having to restore your iOS device, without using the home or power buttons, and without losing any files. It’s fully compatible with all Apple devices: iPhone XS/XR/X/ 8/8 Plus/7/7 Plus, iPhone SE, iPhone 6s / 6s Plus / 6/6 Plus, iPhone 5s iPad Pro (9.7 inch), iPad Pro (12.9 inch), iPad Air 2 / Air, iPad mini 4/3/2 / mini, iPad 4/3/2 and iPod touch. It’s very easy to use for beginners.
Download the program and connect the device to your computer with a USB cable.
The program will access your device, then the “Enter recovery mode” button is displayed. Click this button and start entering recovery mode.
After successfully entering recovery mode, you can press “Exit recovery mode” to rid your iPhone of the need to recover and successfully reboot it.
If the above methods didn’t solve the problem, click “Resolve All Hiccups” and then you will get to the recovery page, click “Fix Now”.
Now you will “Download firmware package” interface, click the “Download” button to download the firmware package online.
Once the firmware package is successfully downloaded, click the “Start Restore” button to start restoring your system.
Other than this. It can help you completely resolve various hang-ups (hanging on black screen/on/blue screen of death), iOS system (hanging in DFU mode/in recovery mode/in HOME button) and error (iTunes crashes during sync/update/restore) on iPhone/iPad/iPod touch without data loss or corruption.
If rebooting your device, updating the firmware, or even resetting the settings did not help, the problem may be hardware related. In this case it is better to contact a service that specializes in repairing Apple products.