How To Update Ipad 3

How to update iOS on iPAD using PC

This method is the only one possible for Apple devices older than 5th version. Wireless upgrade available for all “younger” smartphones and tablets.

First you need to make sure you have the latest version of iTunes (if not, you need to update it). During the iTunes installation process, you will also need to install iCloud (to be able to use the storage). After completing the installation of these programs, connect your tablet to your PC and start installing the update.

If the system has already been updated before, then the software update on your iPad will go automatically.

Launch iTunes, and when prompted to update, click “Cancel”.

  • Then you need to connect the device and wait for a while until automatic synchronization starts. If this did not happen, select the “File” section in the menu and click “Synchronize”.
  • Select the connected iPad in the “Devices” section.
  • On the screen of your tablet, click “Update”.
  • The process has begun. The update will take some time, during which the device will reboot several times. This is a regular process, there should be no cause for concern.

    Installing iOS 10

    If you want to update iPad mini to iOS 10, then you can only do this with devices of the second generation and above. When you start searching for an update on iPad mini, you will receive a message that the tablet has the latest version of the system.

    After the presentation of iOS 10, Apple removed the iPad mini from the list of supported devices. As a result, it looks like this:

    How To Update Ipad 3

    You can install iOS 10 on iPad mini 2, 3 and 4 without any problems: the update is downloaded over the air and installed correctly through iTunes if you first download it to your computer. The lack of support for iOS 10 on the iPad mini is most likely due to the fact that the old tablet model uses the Apple A5 processor, which does not pull the new system.

    You can try to install iOS 10 on iPad mini in a roundabout way, but this will lead to the device not working correctly or not starting at all. Therefore, two options remain: stay on the version that iPad mini supports, or buy a next-generation tablet that has no problems with iOS 10 support.

    With the release of each new version of the operating system, all Apple product owners have a natural question: how can they update iOS on their iPad (or other gadget). And do they need it at all. We will try to describe in detail: what is it for and how to do it in the best way.

    How to update iOS on iPAD: preliminary preparation

    Experienced people recommend doing a clean install of iOS. It consists in the preliminary deletion of all data previously recorded on the device. This greatly improves the further operation of the tablet (or smartphone). But first, the user needs to take a number of actions that will protect him from possible problems, namely:

    • Back up data (make a backup);
    • Copy the old OS version (in case you suddenly want to return to it in the future);
    • Prepare enough free space in memory (the update is large, several GB);
    • Make sure that the device is connected to the Internet via Wi-Fi (you will have to download a lot).

    It is highly recommended to connect the tablet to a power source (or the battery must be charged to the maximum). The operation is very energy intensive, and if the battery runs out during the installation process, everything will have to start over.

    In order to install the new version, you need to download the firmware file using the wireless update mechanism (Firmware Over The Air). The operation is performed in the “Settings” application (“Settings” “General” “Software update”). You can also use iTunes and your computer (laptop) to install the updated software.

    Installing an Intel Xeon LGA771 processor on a 755 socket. Why update

    For all users who want to get the most out of their tablet, a software update is vital. This is primarily due to the fact that most utilities for Apple devices are developed specifically for the latest OS versions. These programs may simply not run on the iPad with the old firmware. As a result, the user of such a device cannot fully (most effectively) use his property.

    To install the updated software, you can contact specially trained people working in service centers. True, this service is paid and quite expensive. Or you can try to figure it out on your own. Over, this does not require any specific knowledge and skills. Any modern person, if he finds a little free time, will be able to cope with this operation on his own and without much difficulty.

    At the moment, the latest version of software for Apple devices is iOS 11.3. It introduced new augmented reality features, making it the world’s largest AR platform. A few days ago, Apple released update 11.3.1 (15E302), where it fixed the problem with a non-working touchscreen in non-original displays.

    Checking the iOS version on the device

    By updating your iPhone or iPad, you can check if the update has actually been completed.

    Open the Settings app.

  • Click “General” and then. “About this device”.
  • Look at the number next to the “Software version” parameter.
  • Depending on your device, the updated software version number should be 10.3.4 or 9.3.6. If you don’t know exactly what device you have, you can determine the model of iPhone or iPad.

    Updated iOS versionDevice
    iOS 10.3.4iPhone 5
    iPad (4th generation Wi-Fi Cellular)
    iOS 9.3.6iPhone 4s
    iPad mini (1st generation Wi-Fi Cellular)
    iPad 2 (Wi-Fi Cellular). Cdma models only
    iPad (3rd generation Wi-Fi Cellular)

    This issue does not affect Wi-Fi-only iPod touch or iPad models. It also does not apply to newer iOS device models that are not listed above.

    Whited00r 7 Firmware

    In addition to the “native” updates of the operating system, which are regularly supplied by Apple for their devices, there are customized iOS 7 firmware for iPad 1. Such updates are developed by enthusiastic hackers and are usually released later than the next official version.

    Developers take as a basis the standard version of the OS for an outdated gadget and supplement it with everything that is possible from the design and functionality of the newer iOS, while maintaining the stability of the device. In particular, for the iPad 1, they took the penultimate original iOS 4 firmware, “changed” it in the manner of the “seven” and called it WhiteD00r 7. But after installing the custom firmware, the 4th version of iOS will actually remain on your iPad.

    Is it possible to upgrade iPad 1 to iOS 7

    Many owners of the first generation “apple” tablet are interested in what version of the operating system they can update it to. It should be understood that this device is already 6 years old and initially it worked on the basis of iOS 3.2. However, you can officially install 4th and even 5th iOS on iPad 1. But starting with the 6th version, things are a little more complicated, since the iPad 1 processor no longer meets its system requirements. Nevertheless, users want to use the “goodies” of newer OS on their well-deserved device and often ask how to update iPad 1 to iOS 7, not to mention the “six”.

    What’s interesting about the “seven”

    What has Apple developers added to iOS 7 that everyone wants so badly? First of all, this is a fundamentally new minimalist design, well, and a couple of hundred functions. Among the latter, they especially highlight the improved multitasking and the appearance of a control point that opens with a swipe from the bottom up and allows you to turn on / off airplane mode, Wi-Fi and Bluetooth, adjust the volume, adjust the brightness and perform many other actions.

    Unfortunately, you cannot install the full-fledged 7th version of iOS on iPad 1, but there is a hacky workaround to get its design and functional gadgets. Don’t worry, you can start using pretty much everything too.

    Preparing ipad 1

    First, make sure your iPad is running a clean version 4 from Apple. If you have a jailbreak firmware, then first flash the device to standard iOS 4 using the instructions. If you have doubts about the originality of your OS or difficulties with updating, it is better not to experiment with custom firmware.

    If there are no problems, then in the next step of preparing iPad 1 for iOS 7 firmware, create a backup using iCloud.

    Then find the Redsn0w utility on the Internet and install it on your personal computer. Also download the archive of the WhiteD00r 7 firmware itself and extract the files from it. And at the end of the preparation, check if you have iTunes, and if not, install the latest version of the program.

    Installing the firmware

    Now that you have everything you need ready, proceed with the installation:

    • Connect your tablet to your computer.
    • Then launch iTunes or wait for the program to start on its own.
    • Wait for iTunes to detect your device as shown in the screenshot below.
    • Click on the icon with the image of the device in the upper left corner and make sure again that the iPad is running the original iOS 4.
    • In the current window, click on the “Restore iPad” button, but before that, hold down the “Shift” key if you are a Windows user, or “Alt” if you are a Mac OS (OS X).
    • In the explorer window that opens, specify the path to the file with the.Ipsw extension, which you saved earlier in the folder with the WhiteD00r 7 firmware, and click “Open”.
    • Wait approximately 15 minutes for the recovery process to complete.

    After successfully installing the firmware, the device will reboot, and you will see a nice design of iOS 7 on its screen.

    As it turned out, reflashing iPad 1 is not that difficult, but now you can safely start enjoying all the advantages of a custom system, while performing the actions you are used to. Continue to enjoy great sound, watching movies and reading books on your familiar gadget in the new style from iOS 7.

    How to update iPhone via iTunes

    When installing new versions of iOS on iPhone, iPad and iPod touch over the air, errors often occur. They are often particularly unpleasant. Mobile devices, for example, start to lose their charge faster or catch the network worse. In order to avoid such problems, it is recommended to install updates using iTunes. In this tutorial we will tell you about this simple process.

    What to do if the installation request does not appear

    In some cases, iTunes does not offer to install a new version of iOS when connecting a mobile device to a computer. Then you just need to go to the iPhone, iPad or iPod touch tab in iTunes and in the “Browse” section click the “Update” button.

    How to update iPhone via iTunes

    Important: Before updating your iPhone, iPad, or iPod touch, make sure you have the latest version of iTunes installed on your computer. You can check for updates on a PC in Help → Updates, on a Mac via the Mac App Store update mechanism. If iTunes is not installed on your computer, you can download the latest version of the utility on the official Apple website.

    To update your iPhone, iPad or iPod touch to the latest iOS version using iTunes, just connect your mobile device to your computer using a USB cable. Itunes automatically recognizes your device, detects that a new version of iOS is available for it, and prompts you to download and install. The window that notifies about the availability of an update looks like this:

    By clicking Download and Update, you will begin the process of updating your device. The firmware download from the Apple server will initially start. You can watch its progress by clicking on the button in the upper right corner of iTunes.

    You can cancel the update during the download phase. To do this, you must click on the cross next to the downloaded firmware. After starting the device update directly, you cannot cancel the installation.

    What to do if iTunes can’t see iPhone

    In the event that iTunes does not see your mobile device, first of all, check the functionality of the USB cable and USB port to which you connect your iPhone, iPad or iPod touch. If you are sure that the hardware is working properly, then you should reinstall iTunes. Important! You need to remove iTunes components in a strictly defined order:

    • Itunes.
    • Apple Software Update.
    • Apple Mobile Device Support.
    • Bonjour.
    • Apple Application Support (32-bit).
    • Apple Application Support (64-bit).

    You can read more about how to properly reinstall iTunes in this instruction.

    Updating iOS firmware on iPad or iPhone

    Someday every iPhone, iPad or iPod user is faced with a software update. Gradually delving into the features of operation, he (the user) understands that to install new versions of games and programs, a fresh iOS firmware is required, under which all Apple devices work. If the iPhone firmware is old, then applications may not install due to incompatibility. And there are no old versions of applications in the App Store, so you have to update the iOS firmware.

    There are several ways to update the firmware. We have already figured out the wireless method and updated our iPhone over a Wi-Fi network without the help of iTunes, which is installed on almost every Apple user’s computer. For those who are not yet familiar with the wireless update, read the instructions. Updating iOS in iPhone via Wi-Fi.

    Unfortunately, the ability to update wirelessly appeared only in iOS 5 and higher. Owners of Athos, Aypads and iPods with firmware lower than 5th version need a computer with iTunes installed to update. For those who do not know their firmware version, read. How to find out the iOS version. If iTunes is already installed on your computer, then you can update iOS:

    • Like from a computer connected to unlimited internet
    • So from a computer with limited network access

    Our computer today has the Internet, so we will try to tell you how to update iOS on iPad using iTunes and having an Internet connection.

    The iPad model is MC770RS, the firmware is iOS 4.3.5, this firmware does not have the ability to update wirelessly, so we take our iPad and connect it to the computer using a native USB cable. If you are the owner of an iPhone or iPod, then you can also apply these instructions for updating the iOS firmware, the only caveat, in the case of an iPhone, the phone must be officially unlocked. If the iPhone is locked to a certain operator, then after the update, the phone will stop catching the network, and you will no longer receive a phone, but a player, there are no such problems with updating the iPod and iPad.

    Updating iPad firmware via iTunes
    We connected iPad to computer and launched iTunes. Before the start of the update procedure, the iPad contained music, applications, contacts, photos and calendar notes, the loss of all this information is not critical for us, so we do not make backups, but on the contrary, we will see what remains the firmware update field. If the data is important to you, then make a backup and save other data using our instructions.

    1. Let’s start updating iOS, in the Devices section of the iTunes program, select our iPad 2 and in the Overview tab, click the Update button. If your iTunes interface is different from ours, then turn on the additional panel on the left. Before clicking the Update button, we read the information above, where it says that our new firmware will be version 6.1.3, i.E. The most recent at the time of the update.

    2. Itunes issued a message where we clicked the Continue button, a notification with the following content:

    3. The next message, where we clicked the Update button, contains the following:

    4. A window called “iPad software update” appears, here you can see the additions and improvements of the new version of iOS. But do not forget that we are upgrading from outdated 4.3.5 to version 6.1.3, so there will be much more new features than in the presented list. We press the button. Next, we get acquainted with the license agreement, we accept it and go about our business.

    5. Itunes starts downloading the update from the Apple server, while at the top you can see the download bar and the time remaining until completion. All right, we went to fry pies, let it creep.

    Here is such an error when updating the iPad appeared when downloading a new firmware, it is associated either with a heavy load of servers, or with an unstable Internet connection. Click OK, try again, click the Refresh button in iTunes and perform from the 1st to the 5th point.

    An hour later, we return to the monitor and lo and behold, in the Overview tab of the iTunes program, we see the already updated version of iOS 6.1.3 and the inscription “iPad software updated”. Thus, on the second attempt, iTunes was able to download iOS for iPad and update the version of the tablet software.

    Setting up an updated iPad
    Once you have iOS installed on your iPad, you will need to complete a few steps to set up your tablet for the first time before you can start using it. The first setup resembled activating iPod touch, about the same step-by-step steps.

    1. Berm iPad, tap the only button. Continue. Next, it is proposed to configure the Internet services of the App Store, iTunes Store and iCloud, but we will not do this yet, since this configuration requires a wireless Wi-Fi network, click Continue. Next.

    2. Go ahead and configure geolocation services, if you enable them, then navigation programs will be able to determine your approximate geolocation. We will not need such a function yet, so select. Disable geolocation services. Continue. Next. We get acquainted with the terms of use of iOS, accept them and move on.

    We refuse to send diagnostic data anonymously. Do not send, click Next. “Your iPad is now set up” and we are ready to start working with the most advanced iOS firmware, for this we tap. Start using iPad.

    O-la-la, the working screen with icons starts and among the standard applications we see new programs, for example Clock, Kiosk, Maps, Reminders, some Music and which were not in iOS 4.3.5. Even more all sorts of goodies of the new firmware version 6.1.3 are in the Settings.

    Well, that’s probably all, now you know how to update iOS firmware on iPad or iPhone using the Internet and iTunes. And lastly, after updating the firmware, applications, music, etc. Were erased from the tablet. And contacts, notes and captured photos remained in place. Now we will install a couple of applications and download music, if necessary, you can download and.

    Ipad firmware. How to flash an iPad. Detailed instructions

    It’s funny but installing recently iOS 7. Beta version of the new operating system from Apple, and then rolling back to iOS 6.1.3, I finally noticed that we still do not have detailed and understandable instructions on iPad firmware. Precisely, there is no instruction at all. This is of course a mess and instructions are still needed, even though the firmware of the devices is from Apple. The process is very simple and it starts literally with two mouse clicks (or two finger taps). What are you now and see.

    For many, the flashing procedure seems complicated due to the fact that there are quite a few ways to flash the iPad. In fact, ordinary users only need two of them. Standard situation. A new iOS has come out and you want to upgrade to it. This can be done through iTunes or through the iPad itself. But in both cases (and in all others too), it is highly advisable to make a backup first, so that if something happens you can restore your data (although in 99.9% of cases you will have everything saved). This is usually done automatically when you connect your iPad to your computer. But if you have old dates in the list of recent copies, you should use the button “Create a copy now” (1).

    Pay attention to the “Update” button (2). If you press it, then in a few minutes, if you have fast internet, you will update the firmware of your iPad. It’s that simple.

    Updating is even easier with the iPad itself. It automatically tracks the appearance of new firmware and signals you about their appearance in this way (3).

    Go to the “Software update” section and click the “Download and install” button (4).

    In some cases, these two methods are not suitable. For example, you have a very slow internet connection. Or you want to update to a beta version that has not yet been officially released (the same iOS 7 beta 2). In this case, you need to download the firmware file of the appropriate version for your iPad model. If you don’t remember your model number. No problem. You can always see it on the back of your iPad (underlined in red). As you can see, I have an iPad A1458, that is, an iPad with Retina display Wi-Fi.

    The iOS 7 Beta 2 firmware can be downloaded from here. Just find the one you need by the number in the title.

    The latest version for iPad 1 iOS 5.1.1 can be downloaded from the link:

    Ios version 6.1.3 for all other iPad models can be downloaded from the following links:

    Ios version 7.1.2 for iPhone 4, iPhone 5, iPod touch, iPad 2, iPad 3, iPad 4, iPad Air, iPad mini and iPad mini 2 can be downloaded from the following links:

    Ios 9.3 for iPhone 4, iPhone 5, iPhone 6, iPhone 6 Plus, iPod touch, iPad 2, iPad 3, iPad 4, iPad Air, iPad Air 2, iPad Pro, iPad mini, iPad mini 2, iPad mini 3 and iPad mini 4 can be downloaded from the following direct links:

    I see no point in posting links to older firmware versions, since you cannot put them (at least without a tambourine). But just in case, I’ll say that you can download them from of this site .

    An important point. If after downloading the firmware will have the extension “.Zip”, change it to “.Ipsw”. Just right click on the file and select “Rename”.

    Now connect your iPad to your computer and launch iTunes. Hold down Shift (or Alt for Mac) and click Refresh. Select the downloaded file.

    And wait for the appearance of the “victory” sign.

    These update methods will suit you 99% of the time. But if you have errors while flashing, or you want to get a “clean” iPad, you can flash it in a special Recovery mode (“Recovery Mode”). In order to get into it, you need to turn off the iPad, and then, while holding the Home button (or, in Russian, the Home button), connect it to your computer. If the iTunes icon and cable image appear on the screen, you did everything right.

    Itunes itself after launch will greet you with such an inscription.

    Here you can simply click “Restore”. In this case, the iPad will be reset and the latest official firmware will be installed on the machine.

    If you press “Restore” while holding down the “Shift” button (“Alt” for Mac), you can select the firmware file individually.

    In both cases, you end up with a picture like this.

    I hope you made a backup, as I advised at the very beginning of the tutorial. If yes, then it’s time to use it by selecting the “Restore from backup” option.

    If you need an iPad just from the factory (let’s say you start life anew), feel free to choose “Set up like a new iPad”.

    Further, the sequence of actions is identical to the firmware in the “Recovery Mode”.

    To exit “DFU-mode”, you need to hold down the “Home” and “Power” buttons and hold them until the first signs of iPad life appear.

    That’s actually all the wisdom. While writing this manual, I reflashed my iPad 4 times. I hope that my work was not in vain and it will be useful to someone, otherwise the instructions on many resources are already outdated. If you have any questions about the firmware, write in the comments, I will try to answer.