How To Update BIOS On Asus Laptop

Instructions for updating BIOS on a laptop

In the laptop service recommendations, you can find a mention of the need to update the BIOS. Few users know why. However, without BIOS, it is impossible to work on computers in principle.

How to enter BIOS on a laptop

BIOS starts immediately at startup. In older models, the letters are clearly visible in the upper left corner of the screen immediately after starting the download. Then they disappear and are replaced by pictures of the OS launch, since it is she who receives control of the laptop.

First you need to determine your laptop model. Here are typical ways for popular brands:

  • ASUS: Hold F2 when power on.
  • ACER: also F2, DEL. Exotic keys: Ctrl-Alt-ESC or F1.
  • Compaq: F10 key.
  • DELL: classic DEL, F2, extremely rare. Ctrl-Alt-Enter.
  • HP: F2, ESC keys.
  • LENOVO: Del, F2.

If everything worked out for you, then something like this window should appear.

How To Update BIOS On Asus Laptop

Don’t forget that you must reboot first. The BIOS window is visible only in the first seconds of operation.

BIOS update procedure

  • Go to the manufacturer’s website and find the support page for your model on the website. Better to use search. Any leading brand has a list of laptops of at least a hundred devices of different age. Below, for example, is the ASUS support page. On the support page, you usually need to select the Drivers Utilities section, then specify the operating system. The menu items we need should be called BIOS and BIOS utilities. The first contains information about the latest versions of the basic I / O system, and in
  • Determine the available BIOS version. Please note that many manufacturers publish a list of changes that the update brings. If the solution to your problem is not listed, then it is likely that the problem is not in the BIOS, but in the installed programs and operating systems.
  • Now we determine the current BIOS version: launch the MSInfo application, press the Win key and start writing the first letters of the program name. Find the BIOS section and look at the version. Build 216 is installed and only 216 is available. If you have an older version than on the manufacturer’s website, then go ahead.
  • Download the BIOS update utility. Previously, only DOS programs were used for firmware. Now everything can be done with a regular application, for example, WinFlash directly from under Windows.
  • Install the program and run.
  • Download the latest BIOS from the manufacturer’s website. Make sure to remember the directory where you unzipped the file.
  • During startup, the BIO C update utility immediately asks for the path to the firmware file. We find the directory into which we unpacked it, and select with the mouse.
  • Be sure to connect the power supply and make sure that the battery charge is at least 20%. Otherwise, the program will not even start its work. In case of power failures, you risk getting a dead piece of iron and plastic instead of a working laptop with an outdated BIOS version.
  • In the window of the update utility, in our case WinFlash, we will see the installed version again, and the version from the manufacturer’s website. If they match, then the Flash button will be grayed out. Otherwise, click on Flash and wait for the procedure to complete.

Important notes

A laptop is a rather closed device in terms of flexibility of settings. Increasing the frequency of the processor or memory will inevitably lead to overheating and premature failure of laptop components. Therefore, you should not place high expectations on the BIOS building site. The most you can do is raise the processor frequency a little, if allowed by the manufacturer, and choose a device to boot.

The latter feature is useful when you need to boot from a USB flash drive. For example, it is necessary to fight viruses. In this case, you need to download the boot disk image from the antivirus developer’s website and boot from it. Previously, you must go into the laptop BIOS and specify the USB-drive as the main device to boot.

We warn you. It is better to entrust the operations to repair or improve a laptop to professionals. Most crashes occur due to incorrect operation of programs in the operating system. The BIOS is only an intermediary between the software and hardware of the laptop.

Windows 7

Separately, it is worth noting the ability to enter the BIOS when the laptop is on.

If ASUS is equipped with Windows 7 or XP version, then entering the “MSInfo32” command will help to determine the type of BIOS and enter the main menu. There are several ways to set it:

  • Enter “MSInfo32” in the Start search bar and then press Enter.
  • Specify a combination for starting the Task Manager Ctrl Shift Esc or Ctrl Alt Delete. Go to the “File” section and select “New task (Run.)”. In the window that opens, enter “MSInfo32” in the input line and confirm with the OK button.
  • Press the key combination R. In the input line enter “MSInfo32” and select the OK button.

As a result of correct key entry in any of the ways, a window will open with all the data about the OS and the version of the BIOS used on the laptop. Then you just need to choose the right keys for the installed type of BIOS. A good hint would be the selection of login buttons below.

Pressing one of these key combinations at the same time when booting Windows 7 or XP will open the main BIOS menu.

Windows 10

In the updated version of Windows 10, it is also possible to enter the BIOS settings by giving this command to the laptop before starting it to reboot. It is necessary to hold down the Shift key. Select the “Restart” section. Or, at the stage of loading the system, press F2. After which the OS will go to the BIOS menu.

Entering BIOS with Windows

In different versions, the way how to get into the BIOS on an ASUS laptop is different, so we will consider each separately.

How to enter BIOS on an ASUS laptop

Every year ASUS products are in great demand among consumers. In addition to high-quality assembly, the full operation of the computer system is ensured by its competent adjustment of all parameters, the initial stage of which is the correct entry into the BIOS on an ASUS laptop.

Windows 8

First of all, you should make a competent connection of the external device, since to enter the BIOS menu on an ASUS laptop with Windows 8 installed, it will correctly use the UEFI settings.

To start the BIOS, you will have to perform the following sequence of steps:

  • On the Desktop Control Panel, select the “Settings” option.
  • At the bottom of the window that opens, click “Change PC settings”.
  • In the menu that appears, select “General”, then click “Special boot parameters” (Advanced startup), and then Restart now.
  • At the end of the reboot, you need to make your choice on the “Troubleshout” section.
  • In the window that opens, find “Advanced options”.
  • Next select “UEFI Firmvare Settings”.
  • Finally, in the last window, click on the Restart button.

And if all the steps of the step-by-step instructions are followed, then the BIOS will start immediately after the system reboots.

What is BIOS

The abbreviation BIOS stands for basic input and output system. It acts as an integral part of the computer system software. Therefore, answering the question of how to enter the BIOS on an ASUS laptop, you need to clearly understand what you have to deal with.

The BIOS is located on the motherboard chip and has its own energy source. A battery. This system acts as a data storage and a guarantee that the necessary information will not be lost in the event of a device failure. All ASUS system settings are saved on it. It is a permanent storage device.

The main function of the BIOS is the timely detection and recognition of all constituent elements of the system:

  • Random access memory;
  • Video cards;
  • Processor;
  • Devices inside the laptop;
  • And external connected accessories (flash drive, disk).

The BIOS checks all communication between them and only then proceeds to start the operating system, transferring control to the bootloader. In other words, it acts as a key link between devices and the operating system.

How to enter BIOS on an ASUS laptop

There are many ways to enter BIOS using various key combinations. But here you need to take into account the fact that depending on the model, modification of the laptop motherboard, the entire sequence of actions can differ significantly. In most cases, Del keys are involved in loading parameters. F2. Ctrl. Esc.

Let’s take a look at several ways that you can enter the BIOS in an ASUS laptop as quickly as possible:

  • Turn on your laptop. Since the parameters are loaded quite quickly, it is required to enter the BIOS in the first 3-5 seconds before the OS starts. When you see the company logo, you need to press Esc. Then the system offers to continue “Enter SETUP” and select the appropriate start button. In most models, the start signal is by pressing the F2 key. As a rule, the system itself indicates which key to select.
  • If the laptop did not react in any way, then you need to try to enter the BIOS by selecting the keys. It can be a combination of Ctrl F2 or Del. Some modified models can respond to pressing F6. F12. F8. It should be noted that it is necessary to try a new key combination during each subsequent system boot.
  • If the loading of the parameters fails, the laptop should be given time to rest and cool down. And again try to boot, by holding down the power key, and further configure the BIOS.

BIOS sections

Having figured out how to enter the BIOS software in an ASUS laptop, a blue partition window opens. Among which:

  • Power is responsible for the consumption of electricity and the presence of constant voltage in the included elements of the system.
  • Main contains information about the type, amount of installed memory, date and time.
  • Boot determines the order in which system parameters are loaded.
  • Advanced includes advanced type settings. Inexperienced users should not experiment with this section.
  • Exit prompts you to leave the system.

Pressing Enter confirms the selection of any of the sections. The arrow keys on the keyboard are responsible for moving between sections. To make changes to the selected view of the menu section, use the PgUp or PgDn keys.

If you have recently acquired an ASUS laptop, then basic knowledge of English and instructions for a computer device that comes with the kit will help you answer many of your questions and help you enter the system settings. And competent work with the BIOS software will help to make the necessary changes to the system operation in a timely manner and eliminate possible problems.

How to flash BIOS using EasyFlash?

Easyflash is already built into the BIOS and has the following features:

  • Fast, works directly from BIOS, without additional software;
  • Simple interface, but the user must have basic PC knowledge;

It is possible to update the BIOS only to a new version, it is impossible to downgrade its version when updating.

The main difference between EasyFlash and Asus EZ Flash is that it is natively built into the BIOS

  • When updating the BIOS, there is a risk of boot failure, you must not forget to make a backup copy.
  • You need to make sure the name of the laptop model is accurate and download the latest version of BIOS.
  • You need to use the unzipped file, then place the image on disk in the root directory.

During the entire update process, you must connect the battery and power supply, avoid accidentally pressing the keys, mouse or USB connection, as these actions may cause abnormal update behavior.

Hardware initialization and performance check

Most of the motherboard BIOS is made up of firmware for initializing the controllers on the motherboard, as well as devices connected to it, which, in turn, may have controllers with their own BIOS.

Immediately after turning on the power of the computer during bootup, using the programs written in the BIOS, the computer hardware self-test. POST (power-on self-test).
During POST, the BIOS checks the operability of the controllers on the motherboard, sets the low-level parameters of their operation (for example, the bus frequency and parameters of the central microprocessor, RAM controller, FSB, AGP, PCI, USB bus controllers). If a failure occurs during POST, the BIOS can provide information to help identify the cause of the failure. If it is not possible to display a message on the monitor, the BIOS emits a beep through the built-in speaker.

How to flash BIOS manually?

For Asus boards, there is a normal manual update procedure. For these purposes, you need to download the latest version from the official ASUS website. Before you start updating the ASUS BIOS, you need to accurately determine the model of the board and download the version for it.
You can download the necessary drivers from the page of a specific model. The ASUS website requires your operating system version to be listed.
Next, you will need to do the following:

  • Make a bootable USB flash drive with MS-DOS.
  • Download the bupdater.Exe file (on older versions aflash.Exe) and the BIOS update file.
  • Restart your computer and boot from a USB flash drive.
  • Next, run bupdater.Exe with the parameters specified in the instructions. The command line might look like bupdater.Exe / i [/ o] [/ pc] [/ g].
  • In place you need to insert the file name of the updated BIOS, a backup copy of the old BIOS. Allow the program to run completely.

Welcome to updated BIOS!

How to properly update the BIOS on an ASUS motherboard

ASUS is the most popular motherboard manufacturer

Asus is one of the largest motherboard manufacturers today. These boards have gained popularity due to the ability to customize the BIOS, as well as hardware capabilities and competitive prices. In addition, Asus is constantly updating the version for various models, and therefore the question often arises of how to update the BIOS asus. This process has now been SIMplified to the extreme.

How to update from BIOS?

BIOS update of Asus boards is done through a specialized program called Asus EZ Flash 2

Asus motherboard owners have the option to update directly from the BIOS. For these purposes, they provided the utility Asus EZ Flash 2.
It contains tools for checking the asus BIOS version and the most common file browser that will allow you to find the file with the new version.
You need to find the update file that is downloaded from the official Asus website.
Www.Asus.com/ru/Motherboards/AllProducts/
When your motherboard is already found, you need to select the “Support” tab. Then the “Drivers and Utilities” tab will open on the page. You need to open it, select your OS and open the BIOS. Then download the new version.
To run the program, you need to enter the BIOS. The most commonly used keys to enter BIOS are: Delete, F1, F2, F3, F10, F11, F12, Esc. The program is located in the “Tools” tab. The program is already in the BIOS and is updated with it.
Next, you need to find the update file using the file manager. Then select the update file and let the program do its job. After installing the updated BIOS, the computer will automatically restart.

Questions and answers in the field of it technologies and PC customization. How to update BIOS?

  • With the computer off, press the power button. When the Asus logo appears, press the F4 key, the EasyFlash interface appears. Otherwise, press F2 to enter the BIOS, then select the Advanced tab, select Start Easy Flash, then press Enter, the utility interface will appear.
  • Using the arrows to select a section, press the Enter key in order to select the BIOS file in the directory section.
  • Use the arrow buttons to select the disk on which it is available, then to the drive to select a good firmware file, press the enter key.
  • When a confirmation pop-up window appears on the screen, you need to confirm the firmware request using the arrows. To confirm the request, press the Enter key. Easy Flash will check the validity of the BIOS update and start updating it.
  • Next, you need to click OK for the utility to start the firmware. Then formatting will be performed and a message will pop up.
  • After this message, Easy Flash will automatically check the installation and turn off.

The BIOS update process does not cause any particular problems if you understand a little about the computer. All the ways of how to do this correctly were described above. Now you just need to decide which method you like more and follow the instructions. Good luck with the update!

Thank me, share the link with your friends on social networks:

How to update BIOS on ASUS laptop (Asus)

The first thing you need to do if you want to update the BIOS (BIOS) of your laptop is to go to the manufacturer’s website and go to the support page for your specific laptop model. The image shows what the button to go to the Asus manufacturer support page looks like.

Then, you should go to the “Drivers and utilities” section and select the version of the operating system installed on your laptop, then find the item “BIOS and BIOS utilities” and determine the BIOS version available for updating on your laptop.

The next step is to determine the version of the BIOS version already installed. To do this, press the “Start”, “Run” button and type the following command: MSInfo32

After that, you need to find the item “BIOS version” and remember its contents.

Now you need to download the program for updating the BIOS (BIOS) on your laptop as shown in the screenshot for owners of Asus laptops.

Next, you need to install the program by following the instructions of the program. Installer.

A prerequisite for the successful passage of the BIOS version update procedure will be the unpacking of the downloaded firmware update file in zip format using an archiver program. The next step is to launch and tell the program the exact location of the unzipped update file.

Attention! To proceed with the BIOS update operation, make sure that the battery state of charge is at a level of more than 50% of the charge and the device is connected to the mains in order to avoid possible negative consequences, up to the complete inoperability of the system.

The final stage of the BIOS update process will be pressing the “Flash” button to install the update file. If the version is selected correctly, the process will be completed successfully. If the version of the update file does not match the one required for your system, the “Flash” button will be unavailable.

General recommendations

Before installing a new BIOS version on a laptop, you need to find out as much information as possible about the motherboard on which it works. You will definitely need the following information:

The name of your motherboard manufacturer. If you have a laptop from ASUS, then the manufacturer will be respectively ASUS;
Model and serial number of the motherboard (if available). The fact is that some older models may not support newer BIOS versions, so it would be wise to find out if your motherboard supports the update;

Current BIOS version. Perhaps you already have the current version installed, or perhaps your motherboard no longer supports a newer version.

If you decide to ignore these recommendations, then when updating, you risk disrupting the device’s performance or completely disable it.

Updating from the operating system

In this case, everything is quite SIMple and the BIOS update procedure can be done in a couple of clicks. Also, this method is much safer than updating directly through the BIOS interface. To upgrade, you need an Internet connection.

Follow this step by step guide:

Go to the official website of the motherboard manufacturer. In this case, this is the official ASUS website.
Now you need to go to the support section and enter in a special field the model of your laptop (indicated on the case), which always matches the model of the motherboard.

After entering the model, a special window will open, where in the upper main menu you must select “Drivers and Utilities”.

Next, you need to make a choice of the operating system on which your laptop is running. The list provides a choice of Windows 7, 8, 8.1, 10 (32 and 64-bit). If you have Linux or an older version of Windows, then select “Other”.
Now keep the latest BIOS firmware for your laptop. To do this, you need to scroll the page a little lower, find the “BIOS” tab there and download the proposed file / files.

Settings

After downloading the firmware, you need to open it using special software. In this case, we will consider updating from Windows using the BIOS Flash Utility program. This software runs only on operating systems of the Windows family. It is recommended to update with their help using the already downloaded BIOS firmware. The program has the ability to update via the Internet, but the installation quality in this case will leave much to be desired.

The step-by-step process for installing a new firmware using this program is as follows:

At the first start, open the drop-down menu where you will need to select the BIOS update option. It is recommended to select “Update BIOS from file”.

Now select the location where you downloaded the BIOS firmware image.
To start the update process, click on the “Flash” button at the bottom of the window.

The update will complete in a few minutes. After that close the program and restart the device.BIOS update

This method is more complicated and is suitable only for experienced PC users. It is also worth remembering that if you do something wrong and this leads to a breakdown of the laptop, then this will not be a warranty case, therefore it is recommended to think several times before taking action.

However, updating the BIOS through its own interface has several advantages:

The ability to install an update regardless of what operating system the laptop is running on;
On very old PCs and laptops, installation via the operating system is impossible, so you only have to upgrade the firmware via the BIOS interface;
You can add additional BIOS add-ons to unleash the full potential of some PC components. However, in this case, it is recommended to be more careful, as you risk disrupting the operation of the entire device;
BIOS installation ensures more stable firmware in the future.

The step-by-step instructions for this method are as follows:

First, download the required BIOS firmware from the official website. How to do this is described in the instructions for the first method. The downloaded firmware must be unzipped to a separate media (preferably a USB flash drive).
Insert your USB stick and restart your laptop. To enter the BIOS, you need to press one of the keys from F2 to F12 (the Del key is also often used).
Then you need to go to the “Advanced” item, which is in the top menu. Depending on the BIOS version and the developer, this item may have a slightly different name and be located in a different place.
Now you need to find the item “Start Easy Flash”, which will launch a special utility to update the BIOS through a USB flash drive.

A special utility will open, where you can select the desired media and file. The utility is divided into two windows. Discs are on the left, and their contents are on the right. You can move inside windows using the arrows on the keyboard, to go to another window, you must use the Tab key.
Select the file with the firmware in the right window and press Enter, after which the installation of the new firmware version will begin.

The installation of the new firmware will take about 2 minutes, after which the computer will restart.For which Asus laptops is it advisable to update the BIOS?

The answer is SIMple. For those with outdated BIOS. Usually these are ASUS X551 and X553 series laptops. This also applies to older models. In any case, the computer will independently inform you that you will not be able to install a new version of the operating system on this BIOS. And he will do it using the error 0x000000A5. We need to install a new BIOS version that will support ACPI, after that the error will disappear, and you can safely install the required version of the Windows operating system.

I will give an example of updating the BIOS on an ASUS X553 MA laptop. The update procedure follows the same scheme, so owners of other Asus models can also use my instructions. If you have a laptop from a different manufacturer, then the difference will be in the source of the BIOS firmware download. I will download it from the official Asus website, but you will need to go to the page of your laptop manufacturer.

And what are the general reasons for updating the BIOS?

First of all, you need to check if your BIOS has an “OS Selection” option in the “Advanced” section. If not, then you need an update. In other cases, SIMply set the position “Windows 7” in this parameter, this will complete the instruction for you.

The following are two main reasons for installing an updated version of the base system:

Mistake. The appearance of the code 0x000000A5, which is accompanied by a blue screen of death. Most users switch to the updated version precisely because of this error. In some cases, owners of laptops with built-in Windows 8 or 10 cannot install an older version of the operating system, in this case the update of the base system also helps.

Working with utilities. Some utilities are loaded not from the operating system, but from the BIOS, as is the case with the installation of the operating system. For example, you can take the Acronis program, with which you can make adjustments to the hard disk, change the number and size of disk partitions. There are many such applications, and new versions require the BIOS on your computer to support the ACPI boot format.

The laptop has an updated BIOS, but the error still pops up when installing Windows 7. What to do and how to be?

In this case, the error is caused by incorrect settings for the “seven” in the BIOS itself. This is especially true for laptop owners with more modern systems. You can fix the situation as follows (try installing Windows 7 after each step):

Let’s start with the SIMplest thing. Reset the BIOS to default settings. To do this, we need to go to the “Exit” section and select the item called “Load Default Settings”.

Has nothing changed? Then try in the same section to change the position to “OS Optimized Defaults” from “Win8 64bit” to “Win7 OS”. The image below shows the process of changing parameters.

If you are trying to install an operating system from a USB flash drive, then it is worth checking in the “Configuration” section the parameter called “USB mode”. Try changing the position from “USB 2.0” to “USB 3.0”.

IMPORTANT! If the reason was in the third step, and you have successfully installed the seventh version of Windows, then after the installation is complete, go to the BIOS again and return the “USB Mode” parameter. Otherwise, the USB 3.0 drivers will disappear, as a result, all USB devices will operate at a reduced speed.Step-by-step instruction

So, you entered the BIOS, opened the “Advanced” section to configure the boot and did not find the “OS Selection” parameter there. In this case, we need to update the BIOS. The required parameter looks like this:

To install the latest BIOS version, you need to go to the official Asus website https://www.Asus.com/ru/ At the top of the screen you will see the products tab, select “Laptops” there and indicate your model in a special field.

We are interested in the X series as this is where the 553 MA belongs. You can always find out the series on the laptop itself or on the box. A window dedicated to our model appeared in front of us. Select the “Support” section, and then click on the “Drivers and Utilities” button.

First, we select the type of operating system, here you should put your version. After that, a list of categories with drivers will appear. Everything is SIMple here. We click on the BIOS category, after which the tab with the latest updates opens. We select the most recent, in my case it is version 214. If you read the article later, you will have more recent drivers. In general, you need to select the topmost version.

It is best to install Windows from a USB flash drive, so it is best to upload the BIOS firmware files to a USB drive. Unzip the archive and drop the contents into the root folder of the flash drive. We also need the “Start Easy Flash” utility located in the BIOS. Perhaps you already have it. Otherwise, the utility will need to be downloaded, you will find it on the official website.

We insert the USB flash drive with the BIOS firmware into the laptop and launch it. In the first seconds of boot, press the “F2” key on the keyboard to get into the BIOS. Here we are interested in the “Advanced” tab, we immediately go to it. Here we click on the “Start Easy Flash”

Now you need to select the firmware file that is on the USB flash drive. It will have exactly the same name as when downloaded. Press the “Enter” key to start updating the BIOS.

After that, a loading bar will appear on the screen, you just have to wait for the process to complete. Do not turn off the laptop while the firmware is being updated, it is recommended that it be connected to the network. Once the process is complete, the laptop will restart. Go back to BIOS and go to the “Advanced” tab. There is now an “OS Selection” option. Click on it to set the installation mode “Windows 7”.

If you are going to install the seventh version of the OS, then you need to go to the “Boot” section and select the media from which you will install the system.

Now you can safely insert the media with the operating system installation files and proceed to the installation of Windows 7. Do not forget to set the priority to boot from the hard disk after the installation is complete, otherwise the computer will try to boot from the USB flash drive every time.

As you can see, the update process is pretty quick. In 95% of cases, a BIOS update will help solve the problem with error 0x000000A5. Do not touch the rest of the settings, follow only the steps that are indicated in my instructions. Experiments can negatively affect the performance of your computer. Done, now you can fully use the seventh version of Windows.

User reviews show that Windows 7 is more popular than a dozen. I, too, belonged to the ranks of Windows 7 fans until I figured out the tenth version. It should be said that it got rid of the inconvenient tables inherent in the eighth version, and the optimization here is an order of magnitude higher than in previous operating systems. So is it worth doing this kind of work to install Windows 7? Yes, if you have a weak computer. Seven consumes less resources than ten or eight, hence the increased performance of even weak machines.

In other cases, it makes little sense to change the modern operating system to an outdated 7 or XP. The latter, by the way, is no longer served by Microsoft. Next year there is a possibility of discontinuance of service and the seventh version of the Windows operating system. Again, updating the BIOS for laptops from other manufacturers follows exactly the same scheme, except that the sites from where you will download the firmware differ.

BIOS upgrade is more stable;

Additional settings can be specified to maximize the use of laptop resources;
Older devices do not have the function of installing updates through the operating system;
You can upgrade without paying attention to what OS is installed on the PC.
The ability to use the latest versions;

The ability to expand the original functionality of a laptop by installing a modified version It is not uncommon for a cheap laptop to have the functionality of a more expensive version, but it is blocked by software, in which case the installation of a modified version by enthusiasts will help. Attention: installing such a BIOS can damage the laptop and void the warranty for the device, therefore, it is strongly not recommended to perform such actions!

The ability to install an older version (it is useful when you find many errors in a new BIOS).

The first step is to download the required version onto a prepared flash drive. The best source is the official Asus website. Www.Asus.com/ru/support/
Reboot the laptop into BIOS (“F2” key immediately after turning on the device). Install the drive into the laptop before rebooting.
Find the menu item “Update Firmware”, “Update BIOS” or something SIMilar.
Specify the desired drive and wait for the update to complete.
The procedure for installing updates itself is as follows:

The firmware downloaded to the laptop must be transferred to a third-party media, having previously unzipped. You can use a disk, but the best option would be a USB flash drive.

Insert the media into the device and restart it. Press the key that is responsible for opening the BIOS interface (Del, F2-F12).
Now you need to go to the “Advanced” block. It is located directly on the main page in the top menu. In some BIOSes, the name may differ, and the item itself may be located in a different place.

Open the “Start Easy Flash” section, after which a special program for updating will start.

The opened window will be divided into two blocks. The left side shows the connected drives, and the right side shows their contents.
Select the appropriate media and select the update file. Navigation in the program is carried out using the arrows and the “Tab” key.

Press “Enter” to start the upgrade. The procedure usually takes no more than a few minutes, after which the device automatically reboots.

BIOS update on ASUS laptop

BIOS is preinstalled in every digital device by default, be it a desktop computer or laptop. Its versions may differ depending on the developer and model / manufacturer of the motherboard, therefore, for each motherboard, you need to download and install an update from only one developer and a specific version.

In this case, you need to update the laptop running on an ASUS motherboard.

Update from the operating system

In this case, everything is quite SIMple and the BIOS update procedure can be done in a couple of clicks. Also, this method is much safer than updating directly through the BIOS interface. To upgrade, you need an Internet connection.

Follow this step by step guide:

  • Go to the official website of the motherboard manufacturer. In this case, this is the official ASUS website.
  • Now you need to go to the support section and enter in a special field your laptop model (indicated on the case), which always matches the motherboard model. Our article will help you find out this information.

After entering the model, a special window will open, where in the upper main menu you must select “Drivers and Utilities”.

  • Next, you need to make a choice of the operating system on which your laptop is running. The list provides a choice of Windows 7, 8, 8.1, 10 (32 and 64-bit). If you have Linux or an older version of Windows, then select “Other”.
  • Now keep the latest BIOS firmware for your laptop. To do this, you need to scroll the page a little lower, find the “BIOS” tab there and download the proposed file / files.
  • After downloading the firmware, you need to open it using special software. In this case, we will consider updating from Windows using the BIOS Flash Utility program. This software runs only on operating systems of the Windows family. It is recommended to update with their help using the already downloaded BIOS firmware. The program has the ability to update via the Internet, but the installation quality in this case will leave much to be desired.

    The step-by-step process for installing a new firmware using this program is as follows:

      At the first start, open the drop-down menu where you will need to select the BIOS update option. It is recommended to select “Update BIOS from file”.

  • Now select the location where you downloaded the BIOS firmware image.
  • To start the update process, click on the “Flash” button at the bottom of the window.
  • The update will complete in a few minutes. After that close the program and restart the device.
  • General recommendations

    Before installing a new BIOS version on a laptop, you need to find out as much information as possible about the motherboard on which it works. You will definitely need the following information:

    • The name of your motherboard manufacturer. If you have a laptop from ASUS, then the manufacturer will be respectively ASUS;
    • Model and serial number of the motherboard (if available). The fact is that some older models may not support newer BIOS versions, so it would be wise to find out if your motherboard supports the update;
    • Current BIOS version. Perhaps you already have the current version installed, or perhaps your motherboard no longer supports a newer version.

    If you decide to ignore these recommendations, then when updating, you risk disrupting the device’s performance or completely disable it.

    BIOS update

    This method is more complicated and is suitable only for experienced PC users. It is also worth remembering that if you do something wrong and this leads to a breakdown of the laptop, then this will not be a warranty case, therefore it is recommended to think several times before taking action.

    However, updating the BIOS through its own interface has several advantages:

    • The ability to install an update regardless of what operating system the laptop is running on;
    • On very old PCs and laptops, installation via the operating system is impossible, so you only have to upgrade the firmware via the BIOS interface;
    • You can add additional BIOS add-ons to unleash the full potential of some PC components. However, in this case, it is recommended to be more careful, as you risk disrupting the operation of the entire device;
    • BIOS installation ensures more stable firmware in the future.

    The step-by-step instructions for this method are as follows:

    • First, download the required BIOS firmware from the official website. How to do this is described in the instructions for the first method. The downloaded firmware must be unzipped to a separate media (preferably a USB flash drive).
    • Insert your USB stick and restart your laptop. To enter the BIOS, you need to press one of the keys from F2 to F12 (the Del key is also often used).
    • Then you need to go to the “Advanced” item, which is in the top menu. Depending on the BIOS version and the developer, this item may have a slightly different name and be located in a different place.
    • Now you need to find the item “Start Easy Flash”, which will launch a special utility to update the BIOS through a USB flash drive.
  • A special utility will open, where you can select the desired media and file. The utility is divided into two windows. Discs are on the left, and their contents are on the right. You can move inside windows using the arrows on the keyboard, to go to another window, you must use the Tab key.
  • Select the file with the firmware in the right window and press Enter, after which the installation of the new firmware version will begin.
  • The installation of the new firmware will take about 2 minutes, after which the computer will restart.
  • To update the BIOS on an ASUS laptop, you do not need to resort to any complex manipulations. Regardless, a certain degree of care must be taken when upgrading. If you are unsure of your computer knowledge, it is recommended to consult a specialist.

    How to understand if a laptop requires a new BIOS firmware?

    Naturally, many readers will immediately have a question: How to determine that a device needs a BIOS update? This is not difficult. As a rule, the following indicates the need to install a new firmware:

    • Errors appear when installing new programs;
    • The device does not recognize flash drives;
    • The sound is gone, and reinstalling the new OS and drivers does not help;
    • The laptop freezes when turning on some applications;
    • The system periodically starts to reboot itself;
    • The motherboard “does not see” the hard drive or video card (this happens especially often if models with higher capacity and memory are installed);
    • The laptop periodically freezes and many others. Dr.

    The list of possible faults does not end there. Due to the outdated version of the BIOS, a lot of other problems may appear.

    How to update BIOS?

    The BIOS update procedure is not particularly difficult. However, it requires accuracy and care. After all, if something is done wrong, then the laptop will have to be given to a service center. Therefore, follow the instructions carefully:

    • Connect your laptop to an electrical outlet. Wait for the battery to charge. Do not unplug the device! If you are using a laptop without a battery (or it is faulty), then connect it to an uninterruptible power supply.
    • Next, you need to determine the BIOS version. To do this, enter “MSInfo32” on the command line. In the window that opens, we find information about the BIOS version. There is another way. It is enough to go into the BIOS, in the very first tab “Information”.
    • Now you need to find and download the new firmware file. Therefore, we go to the official website of your laptop manufacturer. For example, you have a packard bell device, you need to follow the following link http://www.Packardbell.com. To update the BIOS on a lenovo laptop, you need to go to https://support.Lenovo.com, on an MSI-branded device, go to https://ru.MSI.com/, etc.
    • In any case, having got on the Internet resource of the laptop manufacturer, immediately go to the “Support” section.
    • Here you will need to specify the laptop model and OS version. Or, to begin with, select the “Drivers and Utilities” subsection. It all depends on the specific manufacturer and its website. After that, the Internet resource will offer you the latest versions of the BIOS firmware. By the way, the menu items we need are often called “BIOS” or “BIOS utilities”. If you cannot navigate the website of the laptop manufacturer, then you can help find the necessary software through the search.
    • We choose a fresh version and start downloading. It is only better to update in stages. Let’s say you have BIOS version. 1.31. Then it is not recommended to install version 1.37 right away. For a start, it’s better to take an intermediate option. For example, download and install BIOS update 1.35.
    • We are waiting for the installation file to download. It is usually archived. Therefore, after downloading, we find it and open it. We see the Windows folder. We go into it and run the file with the exe extension. It also happens that the installer of the new firmware is not archived. Then just download the EXE file and double-click on it.
    • We are waiting for the BIOS update process to complete. In this case, the laptop will definitely restart. On average, the whole procedure lasts from 15 seconds to a couple of minutes.
    • To check if the new firmware was successfully installed, go to the BIOS in the “Information” tab. An alternative option is to enter “MSINFO32” in the command line (opened through “start” or by a combination of WINR) and press Enter.

    That’s all now you know how to flash BIOS on a laptop.

    What is BIOS?

    Let’s take a look at what a BIOS is. Under this SIMple term, it is customary to understand an input-output system or a set of firmware that allows you to customize the components of the system unit in a special way, as well as loading the OS. Simply put, the BIOS is responsible for checking the health of all computer systems (video adapter, processor, motherboard, etc.) and ensures their optimal operation.

    Depending on the manufacturer, BIOS is divided into 3 types:

    • Phoenix,
    • Award,
    • AMI.

    The BIOS chip itself looks like a small chip. Many even confuse it with a battery, which is responsible for the safety of data when the laptop is turned off.

    Different ways to update BIOS on a laptop

    Most users do not even know that on any laptop you need to periodically update the BIOS. What happens if you don’t? Then “glitches”, “brakes” and all kinds of problems will accumulate in the operating system and fundamentally complicate the operation of the device. If you update the BIOS correctly and regularly, it will fix many errors and enable additional support for memory and processor.

    How else can you update the BIOS on a laptop?

    There are also alternatives to help you install BIOS updates. For example, you can use special utilities. All you need is Internet access.

    Let’s say you need to update the BIOS on an asus laptop. Then download the ASUS BIOS UPDATE installer from the official ASUS website. We install the utility. We open it. Next, click on the “Auto Tuning” button. Then we choose exactly how we want to update the BIOS:

    • From the Internet;
    • From file.

    Click further. Most likely, the program will even prompt you to change the logo before updating. If interested, you can play with the settings. If not, then click “next”. By the way, an additional window may open, then you should click on the “Flash” button. We observe the indicator of the installation of the new firmware. At the end of the installation, we agree with the system and reboot the laptop.

    Someone prefers to install the latest BIOS firmware from a USB flash drive. To do this, you need to adhere to the following scheme of actions:

    • Find and download the latest BIOS firmware for your laptop model. Only on the official website of the manufacturer!
    • Insert flash drive into USB port.
    • Unpack the files to an empty USB flash drive, previously formatted in “FAT32”. Do not remove the flash drive from the device.
    • Reboot your laptop. When the system starts, enter the BIOS while holding down the corresponding function keys (usually F2 or Del).
    • Use the arrows on your keyboard to find the section with the word “Flash” in the title.
    • Select the USB flash drive that contains the new BIOS firmware. Hit Enter. Wait for the update process to complete.

    Sometimes, to install a new version of the BIOS, you need to boot from a USB flash drive, on which the installation file was previously written. To do this, you need to enter the BIOS menu. Next, find the BOOT tab and in it Boot Device Priority. This is where the download priority is set. Therefore, we press enter to change the hard drive from Windows to a USB drive. Then we save all the changes (F10) and reboot the laptop. We are waiting for the new BIOS firmware to be installed.