How to unlock the iPhone if it is blocked by the owner

What to do if I found iPhone

Apple pays special attention to the safety of its devices. This applies not only to the data stored on the smartphone, but also the gadget itself. For this, several types of blocking are used. With their help to unlock someone else’s device will not work.

First of all, there is a blocking of the phone itself. Various methods are used here, depending on the version of the device.

April 2022, Unlock iCloud New Method Free ✌️ Without Previous Owner ��

The fingerprint scanner

In older models, a fingerprint scanner is used. The smartphone scans the pattern of the finger and keeps it in the encrypted form. It is quite difficult to access this information.

But modern scanners are not perfect enough. The fingerprint can be obtained in various ways. The easiest will be a high.Quality picture of the palm. In addition, this scanner on smartphones often does not work. Especially if there are scratches on the fingers that distort the drawing or the hands are wet.

Faceid

In the new models to replace the fingerprint scanner, Faceid technology came. She is much safer Touchid for several reasons. The principle of operation of this technology is to create a 3D user face model. This is possible thanks to a special projector that directs 30 thousand points to the face, and the infrared camera fixes them. A peculiar map is created.

During unlocking, the device compares the user’s face with what is stored in memory. In case of coincidence, the phone will be unlocked. All data about the picture are stored in an encrypted form on the device itself and the Apple digging is not transmitted. Therefore, attackers will not be able to get this information. In addition, it will not work to unlock the smartphone from the photo either. Since the system distinguishes 3D image from ordinary.

unlock, iphone, blocked, owner

PIN-code or password

In addition to the above technologies, the user sets another type of lock, pin or password. This is a security measure in cases where a fingerprint or face is not scanned. The user has another option to unlock. It is enough to enter a set of numbers or previously installed passwords to unlock the device and gain access to all information.

In some cases, the user can forget the password from his phone or, enter a large number of incorrect combinations. Then the device will be blocked. However, this does not mean that the smartphone can no longer be used. To unlock, the user needs to enter the Apple ID information. The mail will be displayed on the screen, to which the password should be indicated. After that, access to the gadget will be restored.

Technology “Find iPhone

To ensure the security of all the data stored on the device, Apple has introduced the technology “Find iPhone”. With its help, the user who has lost his device can block it. It will be impossible to circumvent this protection by existing means.

As soon as the user indicates that the phone was lost, the device is automatically blocked. For unlocking, it is required to enter Appleid data, which only the owner knows. At the same time, the user can remotely erase all the information that is on the gadget and view on the map where the smartphone is currently located. The function works even if the device is turned off.

With such a blocking, flashing will not change the situation. After a complete reboot, the system will still request a password from Apple ID. Therefore, no one can use the phone without knowing this information. To protect yourself in a similar way, this technology must be activated in advance.

Buying a “hand” device can lead to the user to purchase a blocked smartphone. Often gadgets are configured for a specific operator. In this case, it will not work to insert your card and use the phone until the contract with the mobile communications operator ends. In this case, the device can be completely locked.

See also  iTunes failed to connect to this iPhone

If nothing helped

Когда ни один из рассмотренных способов не помог, можно воспользоваться специальными программами для разблокировки iPhone. But, the methods should be approached carefully, carefully check the resources, and understand that most of them can even harm the mobile device even more.

unlock, iphone, blocked, owner

The most popular iPhone unlock utility is 4ukey. The program helps if the owner of the phone forgot the password. Details in

If you bought a new iPhone, have all confirming documents, it is better to contact the authorized Apple center or write a letter to the manufacturer directly to the manufacturer.

Unlock via R Sim

R-SIM is a chip that literally “deceives” the gadget. With it, you can inexpensively restore the performance of the unit. The only problem is the validity of the chip. No one will definitely answer the question when the gadget will fail again. If you want to try this method, use the following instructions:

  • Inbate R-SIM in a slot for the SIM-card of the device.
  • Select on the screen corresponding to your settings model, and then find in the list of your cellular operator. In the absence, enter the IMSI operator code. After waiting, the device will begin to work as before.

Actual ways to unlock

How to unlock the iPhone 4s or any other Apple smartphone? To do this, use the recovery procedure. The essence of any unlocking is to completely delete all the data from the smartphone, and then restore it using a backup copy. But before deleting the data, you need to create a backup itself.

  • We connect the iPhone to the computer;
  • Run iTunes and wait for the installation of the connection;
  • If iTunes requested a password, try to connect to another computer;
  • After installing the connection, we create a backup copy of all important data.

In order to make a backup, you must go to the “review” tab and sink to the “backup copies” window. Choose a place of storage of copies (iCloud or computer), click on the “Create a copy now” button and wait for the operation to complete the operation. At the next stage, we need to start the iPhone in recovery mode (DFU). How to do it?

First you need to completely turn off the smartphone by pressing and holding the power key. After a few seconds, the shutdown slider will appear, which will need to be browned to the right. Now we need to turn on the smartphone in recovery mode. To do this, clamp the power/lock button and the “home” button, hold them for 10 seconds. After 10 seconds, the power key should be released, continuing to hold home. After another 10 seconds, we let it go. Please note that all this time the smartphone should be connected to a computer with iTunes running on it.

unlock, iphone, blocked, owner

As soon as we release the “Home” button, iTunes will declare that a device connected in recovery mode has been discovered. Click on the restoration button and wait for the operation to complete the operation. As soon as the recovery operation is completed, the smartphone will turn off and start normally, with the launch of the operating system. Now he will be the way he left the manufacturer’s factory. In order to return all the data to it, you need to connect the device to the computer, start iTunes and restore data from the last backup copy. Now your smartphone is completely ready for further operation.

When setting protection on the entrance to the system, set such passwords so that they can be remembered. If you suffer from forgetfulness, write down the password on a piece of paper and place it in a reliable place, for example, in a smartphone box.

How to unlock the iPhone without password in recovery mode

In addition to the above methods, you can resort to recovery mode to unlock your iPhone without password. The recovery mode is resetting to your iPhone and helps to remove the password. Please note that this process will erase all content and data on your iPhone. Here’s how you can do this:

Step 1 Connect the iPhone to the computer and run itunes. Make sure iTunes is updated to the present on this computer.

Step 2 then convert the device to the recovery mode. Hold the “home” button and the power button at the same time for 10 seconds. As soon as the screen becomes black, release the “Nutrition” button, continuing to hold the “Home” button until ITUNES displays the message that he discovered the iPhone in recovery mode.

unlock, iphone, blocked, owner

Step 3 in a pop.Up window select “Restore” and follow the instructions to restore the IPhone factory settings. The process will unlock your iPhone, and then you can configure it from the very beginning or use the last backup file to restore your iPhone.

See also  Why does my iPhone not charge when turned on?

When blocking the screen

This is the easiest option. The situation when you do not know the numerical or numerical code. Which iOS requires for each unlocking screen (if Face ID or Touch ID is not used). In this case, the smartphone turns on, but get access to information and generally go beyond the lock screen without a password in any way.

Even if the code is only four.Digit and digital, you cannot guess it by selection. After 10 wrong attempts, the input possibility is disconnected for 1 minute, and then this time grows, reaching a few hours.

What to do

The only way to unlock the iPhone without a password is to erase all the data on the smartphone and restore the device using a computer. If you have a backup in iCloud or iTunes, later all the information can be returned.

An important point: if the device “Find the iPhone” is included on the device (and it is always active by default), then after recovery the system will require the password from the Apple ID account account. If you enter a password, the iPhone will return to normal working condition. Otherwise, you will get a different type of lock. Activation blocking.

To reset the lock password, you need a USB cable, a computer with Windows or MacOS, as well as iTunes. If it is not installed, download it from Apple website. If you have MacOS Catalina or a later version, instead of iTunes you should use the standard Finder application.

First turn off the iPhone, holding the side or upper button. Disconnect the cable from the smartphone if it is connected. Next, act depending on the model of the device:

  • On the iPhone 8, iPhone 8 Plus, second.Generation iPhone Se, iPhone X and more new models: connect the device to the USB.Cable computer, clamping the side button, and do not let it go until the recovery screen appears.
  • On the iPhone 7 and iPhone 7 Plus: holding the volume reduction key, connect the smartphone to the PC via USB cable and not let it go until you see the recovery screen.
  • On the first.Generation iPhone SE, iPhone 6s or older models: holding the “home” button, connect the device to the USB.Cable computer and do not let it go until the recovery screen appears.

When a window appears on the PC screen that the iPhone is discovered and the offer to restore or update it, click the “Restore” button. At the end of the procedure, enter an iPhone password for Apple ID account. The device will return to working condition. It will be possible to configure it as new or restore data from a backup copy.

If the waiting time exceeds 15 minutes, the smartphone will get out of the recovery mode. In this case, you will have to repeat the process again. To reconnect the iPhone to the computer by holding the necessary button, and select “Restore”.

If you forgot the Apple ID password

There are situations when you have to unlock the iPhone 5s if it is blocked by Apple ID account. Manufacturers of “apple” smartphones also provided a situation where the owner loses or forgets the login and password of Apple ID. In such cases, you should not despair, unlock the phone is possible using additional email or answers to control questions. This information is asked by the user during the primary setting of iPhone. It is to solve such problems that it is recommended to choose reliable but memorable passwords and answers to questions.

Unlock through iTunes

The ITUNES program is an indispensable assistant to the owner of the company Apple. The case is not limited to simple file management, the application helps with the errors of the operating platform, freezes and problems with the battery. In the case of a forgotten password, this program will also become the main tool for solving the problem. The advantage of using the program is that the instructions are extremely simple, so it is possible to use this method at home, without going to the service center. And do not be afraid of errors, because the manufacturers of Apple smartphones have provided opportunities for the rollback of the device to the recovery point or factory state.

See also  How to throw photos from Mac to iPhone

While saving user files

Let’s talk about how to unlock the iPhone through iTunes while maintaining user information. If the screen is blocked, then Hard Reset and a simple reloading of the device will not help, the counter will remain in place. To save information, it is worth using the recovery mode. Recovery Mode does not affect files, only rolls the smartphone to the last successful launch, but the password will drop. It is important that the smartphone is synchronized before that so that the iTunes program does not request password entering. Iphone will also not be able to connect to the new computer, since an unlocked smartphone is required to conjure.

Through the previous synchronization

The method of unlocking the smartphone through the previous synchronization of the device with a personal computer is considered a priority because it does not affect the user files and settings. For this:

  • Connect through the iPhone cable to PC;
  • Open the iTunes application and wait for the completion of the conjugation. The computer will need time to read files;
  • Select the connected device in the list and press the “Synchronize” button;
  • Wait. The process lasts from a couple minutes to a couple of hours;
  • After completion of the conjugation, click on the “Recovery of Data from the backup of iTunes” button;
  • In the list, select a suitable backup by date. It is recommended to choose a fresh option.

It remains to wait for the completion of the process, the lock lock will be reset. The user will get access to the device.

With full cleaning

If synchronization with a computer was not performed, or information is not valuable for the owner of the iPhone, then you should use the DFU mode. In this case, the phone will return to the state of factory, the information will have to be restored from scratch. This will need:

  • Turn off the iPhone;
  • Squeeze and hold the buttons “Food” and “Home”;
  • Release “food”, and holding the “home” connect the smartphone to the PC using a cable;
  • Wait for the iTunes logo on the iPhone display and start the program on the computer;
  • A message will open on the screen that the phone is connected in recovery mode, you must click on the OK button;
  • Confirm the choice by clicking “Restore the iPhone“.

As a result, the iPhone will begun, the files will disappear, and the settings will return to the factory state.

Is it possible to unlock the iPhone found

Of course, in our world there are many people who will try to appropriate a foreign mobile gadget if they find it somewhere. Experts do not even recommend trying to remove the lock from the iPhone (or any other Apple device) since very often the owners still find their smartphone. And in this case it will be difficult to explain why it was unlocked.

If you move away from moral tips, you can tell a very simple instruction that will help change the password for unlocking the Apple gadget. First you need to connect the phone using a cable to your computer, and wait until it synchronizes with iTunes. Then, again, you need to convert the device to the update mode. Then it will start connecting to the program.

How to remove activation lock without previous owner 2021!! Free method any iOS Done!!

After that, a message will appear on the screen that the program has discovered a device requiring restoration. Over, the program itself will recommend performing this procedure. Now it will be enough to press the “Restore” button, and wait until the process is over. After that, there will be no data and information in the gadget’s memory, but with proper observance of all steps, the method should help. Now the smartphone will work as usual without a password demand.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE