How To Understand That The I11 Headphones Are Charged

Xiaomi’s new Mi Airdots Youth Edition wireless headphones, as expected, should be recharged automatically from the case’s built-in battery as soon as you put them in this case. But, as practice shows, although they should be charged, they sometimes do not charge.

The reasons for this can be very different, because in this post. briefly on how to check the battery charge level Mi airdots and the batteries of their case, how to charge them, what you need to pay attention to in the process, etc.

So, in order:

How To Understand That The I11 Headphones Are Charged
How to check the battery level of Xiaomi Mi Airdots Youth Edition headphones

This is not difficult. Each earphone is equipped with a multifunctional LED indicator (located on the outside of the earphone case, it’s hard to miss). LEDs indicate status Bluetooth connectivity, as well as the charge level of the built-in headphone batteries.

Usually, the indicator does not manifest itself in any way, but if it lights up red, then this means that the headphone has less than 10% charge. In addition, this model also has a voice prompt for a too low charge level (most importantly, do not turn it off and / or ignore it).

How to check the battery level of the charging case of the Xiaomi Mi Airdots Youth Edition model

The case also has its own indicator, it is located on the front panel of the device and also knows how to signal the charge level of the built-in battery, moreover, there are several such signals. So when you put both earphones in a case, and after that the case indicator:

Video: How To Understand That The I11 Headphones Are Charged


  • blinked white several times and turned off. the battery of the case is fully discharged, and it is time to charge it;
  • started flashing red every 3 seconds. the battery of the case is almost completely discharged, and you need to charge it;
  • lights up white and does not blink. the battery of the case is fully charged and you can disconnect it from charging (after that, the indicator will go out immediately).
How to charge the charging case of Xiaomi Mi Airdots Youth Edition

We’ll clarify the case’s battery parameters just in case:

capacity: 300 mAh
input voltage (current): 5 V (300 mA)
output voltage (current): 5 V (150 mA)

Charging case through cable USB to MicroUSB from the USB port of a computer, a compatible network charger (you must choose it very carefully, see battery settings) or an external battery (from "bank»Charging slowly). Under normal conditions from USB port computer battery headphone case Xiaomi Mi Airdots Youth Edition up to 100% is charged in about 2.5-3 hours.

How to charge Xiaomi Mi Airdots Youth Edition headphones

Just put both headphones into their jacks in the charging case and close the lid. The case indicator will turn red, which means that the headphone charging procedure has begun. When the headphones are fully charged, the indicator will turn white and turn off after 1 minute. In a charging case with a fully charged battery, headphones Xiaomi Mi Airdots Youth Edition up to 100% charge in about 1.5 hours.

And finally, a couple more points:

  • the new Xiaomi Mi Airdots Youth Edition headphones must be charged up to 100% before use;
  • If you have not used your Mi Airdots for more than 2 months, then before you start using, you need to fully charge both the case and the headphones themselves.