Sony GTK-XB72 review: a speaker for home and party
The music center will cope with the playback of songs much better than a standard smartphone, because its sound quality is higher and the sound is more powerful and detailed. It can also be connected to the Your iPhone and Android phone
The type of device itself does not matter much, the main thing is to know the step-by-step instructions.
The oldest, proven and simple method to connect to LG music center or any other firm model is via aux. The connection is made with the of the 3.5-mm jack cord
, These are the plugs you’re most familiar with, found on standard headphones and iPod/iPhone.
In order to enjoy quality sound, you need to Connect your smartphone to your stereo
, by sequentially performing the following actions:
Another simple method is to the connection via USB cable
To do this, first find the USB socket on the audio system and connect the end of the cable to it.
Then you need to insert the other end of the wire into the jack on your phone and select the “USB” mode in the stereo settings. After performing these actions, all that remains is to play your favorite track.
How to connect your iPhone to your Sony speaker?
How to connect a Bluetooth speaker and other devices to your iPhone
- Turn on Bluetooth on your iPhone
- Under the switch, there’s a “My Devices” field. find the speaker you want there.
- If it’s not there, check to see if Bluetooth is enabled on the accessory
- Pick a speaker from the list and wait for the gadgets to pair up
How to connect a Bluetooth speaker to your phone. Very simple instructions and all the ways
If you bought a Bluetooth speaker, you’ll definitely want to use it without involving a cable. As mentioned at the beginning of this article, Bluetooth is most commonly used for wireless audio transmission. The version of the “blue tooth” does not play a big role. basically it only affects the power consumption and range. If the speaker and smartphone have different versions of Bluetooth chips built into them, that’s okay. they’re all backward-compatible.
The easiest way to fulfill the wireless connection of the Bluetooth speaker is if it and your smartphone are equipped with NFC-chip. If it is present, it is enough to put the speaker to the back of the phone, and then the devices are synchronized automatically. you will only need to confirm this action by pressing the “OK” button.
If there is no NFC on one of the gadgets you will have to connect it manually. At least for the first time. This is done as follows:
- Turn on the wireless speaker.
- Go to the notification panel on your smartphone.
- Hold your finger on the Bluetooth button. You can also go to the appropriate section through “Settings”.
- Here you must first activate Bluetooth if it was previously turned off. To do this, use the appropriate switch at the top of the section.
- Press the “Search” button. If you have just now activated Bluetooth, the search for nearby devices can start automatically.
- Your smartphone should display all Bluetooth devices that are currently turned on and nearby. Click on the one that resembles the model of your Bluetooth speaker by its name.
The system will start the synchronization process. You might be asked to enter a numerical code somewhere on the bottom of the speaker. Or you will be asked to do something with the device, like hold down the power button for three seconds. But more often than not you will not need to do anything at all for a successful pairing.
Thereafter, the speaker will connect automatically as soon as it is turned on. Of course, you’ll need to have Bluetooth enabled on your smartphone to do that.
Many wireless speaker owners wonder which type of connection is more convenient. We think it’s better to use Bluetooth. But remember that sound is transmitted over the air in a compressed form, unless the speaker and the smartphone support the AptX profile. However, portable speakers are most often compact in size, so they are physically unable to reproduce sound in maximum quality. So we advise you not to worry, using the wireless method to connect.
How long have you been using your portable speaker?? Are you satisfied with the sound of the speaker?? And have you had any problems with the connection? We wish to read your opinion in Комментарии и мнения владельцев.
How to unite the Sony speakers?
If the speaker is compatible, but your phone can’t detect it. go to settings and select “forget” function. It does not help. reset the network settings (it is recommended to create a backup before). If the iPhone does not see the speaker after the above-mentioned manipulations. it is recommended to take it to the service center.
How to connect your phone to the speakers?
Turn the speaker on and activate Bluetooth. On the phone goes to “Settings/Settings” menu, opens the Bluetooth section, activates the wireless connection and starts searching for available devices. From the proposed list of devices select the speaker. Within a few seconds, the connection should be complete.
You will need a USB-MicroUSB cable (most modern smartphones come with such a cable). Once connected, select the USB source in the music center’s settings and activate “Sync Data” mode on the phone.
Why the phone does not see the wireless headphones?
To understand why the phone does not find the Bluetooth-headset, it is necessary to exclude some defects: Make sure that the batteries in both gadgets are charged. Make sure the accessory is not being used by another device. Check to see if your smartphone is synchronized with the headset.
Some of the reasons why the Bluetooth module is not detected by other devices include the following The device is in a switched-off state. In the settings disabled discovery via Bluetooth. Long distance between the receiver and transmitter.
How to Connect Speakers to a Mobile Phone?
The connection sequence in this case is very simple: the cable from the speakers plugs into the adapter on the RCA socket side, then the other end of the adapter plugs into the socket on the phone. If the speaker cable has a 3.5 mm plug, the adapter is excluded from the sequence.
If you accept the fact that the speaker is definitely serviceable and works with other phones, it is usually the following reasons: A minor software failure in the speaker itself A previous pairing was not programmatically deleted from the speaker’s memory Different versions of Bluetooth in the speaker and the phone
How to connect Sony wf1000x headphones?
Press and hold the button on the left earpiece for about 7 seconds until the indicator light starts flashing blue and red. Make sure that when you release the button, the indicator light flashes blue and red alternately. You will hear the voice notification “BLUETOOTH pairing” (BLUETOOTH matching).
On the case of the music center to find the hole labeled “AUX” (or perhaps another designation “AUDIO IN”) and the other end of the wire into this jack audio system. Find the “AUX” button on the stereo and press it. On the smartphone screen, find the desired song and turn it on.
How to connect 2 audio speakers at the same time
As the companies of electronics manufacturers compete with each other, the wireless connection of two speakers of different brands, at the moment is implemented with great creaking.
- Make a wired connection using two AUX cables and a mini-jack adapter. This scenario is simple to implement: the ends of the cords are connected to the speakers, and the other ends are plugged into the splitter adapter. The other side of the adapter is connected to the connector in the phone;
- buy a portable speaker from JBL, Sony or other companies that supports the synchronization function of two or more devices;
- download and install a special AmpMe program. The application allows you to connect to multiple devices simultaneously. The program supports any phone;
- Buy Cell Phones with Bluetooth 5.0. This module, implemented on some recent models of smartphones, allows you to bind multiple audio devices simultaneously via Bluetooth.
Is it possible to connect the landline speakers to the phone?
Stationary speakers like computer speakers, old Soviet passive speakers, car speakers or ones from music centers are in every home. But you can’t connect them without an amplifier.
But it is quite realistic to use a music center with a built-in amplifier. For this you need an AUX headphone jack and a special adapter. On one side, the adapter has a plug for a standard 3.5 mm jack and on the other side there are 2 cinch plugs. AUX is inserted into the cell phone, “tunes” into the connector labeled IN, the main thing is to match the color of the plugs.
I have a model with an NFC chip, what to do??
For modern smartphones with an NFC chip, synchronization is much easier than with Bluetooth. This technology works best if both devices have the chip. You need to bring the speaker to the back of the phone (as close as possible). A confirmation prompt should appear on the screen. An affirmative answer will start the pairing and everything will work.
How to set the auto on
New generation speakers can be set to play music automatically. First you need to synchronize your devices by selecting your docking station in the list of connected. The gadget will make a short sound to indicate successful pairing. Music will play automatically every time the player is turned on.
How to connect to a stereo
To output sound from the cell phone to the speakers in the car, use two options: