How To Turn On The Proximity Sensor On An Iphone

How to configure, enable or disable the proximity sensor Android. Answers on questions. What is Proximity Sensor Android?

The proximity sensor is a small element of the device that is activated when the phone physically comes close to an object.

Due to the correct operation of the proximity sensor during a conversation, the smartphone display turns off automatically as soon as the user brings it to the ear.

The proximity sensor Android is very useful and even necessary for at least two reasons, namely:

With the screen off during a call, you definitely won’t accidentally press any button on the touch screen, for example, with your ear or cheek.

  • The proximity sensor Android allows you to save battery power. With the phone screen turned on during a call, the battery charge would be consumed much faster, and this is extremely inconvenient for people who are used to or have to talk on the phone for a long time
  • The proximity sensor is located at the top of the smartphone. As a rule, it is placed next to the front camera lens. On some devices, the sensor is visible to the naked eye, and on some it is not so easy to detect it. To locate the proximity sensor, simply remove the device from your ear during a call and bring your finger to the place next to the front camera. If the display is blank, it means that you have found the sensor.

    How To Turn On The Proximity Sensor On An Iphone

    Proximity sensor Android. How to turn on, turn off, configure?

    Many users often encounter a problem when the smartphone screen is not blocked during a call. Learn how to properly configure the proximity sensor Android.

    How to set up a proximity sensor on Android?

    If your proximity sensor is turned on but does not work, you need to calibrate it or, in simple words, configure it. The easiest and safest option to solve this problem is to download the free application “Proximity Sensor Reset” from the Play Market.

    To configure the proximity sensor on Android using this program, you need:

    • Download and install the application “Proximity Sensor Reset”
    • After starting the program, click Calibrate Sensor
    • Cover the proximity sensor with your hand and select Next
    • Remove your hand and select Next again
    • After that press Calibrate and Confirm
    • Give the program access to root rights. In the window that opens, click “Allow”
    • Wait for the device to reboot
    • Check if the sensor is working properly

    If these steps did not solve the problem, and your proximity sensor still does not work, then you may need to calibrate the display. For information on how to properly calibrate the display, read our article. Calibrating the Screen and Battery on Android. Also, flashing the device can improve the operation of the sensor. You can find out information and select the firmware for your phone in the corresponding section of our website.

    In some situations, a hardware failure occurs, and for the correct operation of the proximity sensor, it needs to be replaced. In this case, we recommend contacting the service center for the help of a specialist.

    If you have any questions about how to configure the Android proximity sensor. Write in the comments. We are always happy to help.

    You may be interested in reading our article. Proximity sensor does not work after replacing the display.

    How to enable proximity sensor on Android?

    Usually, the sensor is turned on by default, but if it is not active for you or you accidentally turned it off, then you can always turn on the Android proximity sensor again.

    For this you need:

    • Go to the phone settings menu
    • Go to the “Calls” section
    • After that “Incoming Calls”
    • Next, find the item “Proximity sensor”
    • Turn on the proximity sensor Android by activating the checkbox

    Features of using the function in different techniques

    In household automation, the proximity recognition function is also very widespread. Non-contact sensors are used to turn on table lamps, open water supply taps when a human hand is in their field of action; the displays of refrigerators and microwave ovens will be inactive until the user’s hand approaches them. Equipped with this function and new home automation systems. Touchscreen displays used to control home appliances and lighting are configured to serve as digital frames. But as soon as one of the people approaches them, control buttons immediately appear. A rather interesting technology is the proximity sensor in the phone. What it is, will help to understand the description of the method by which recognition occurs.

    Successive approximation method

    In this case, the switched capacitive circuit is charged. From this capacitor, a voltage is supplied to the comparator through a low-pass filter, where it is compared with a reference voltage. The counter, synchronized with the generator, is locked by the output of the comparator. It is this signal that is processed for a specific sensor status. The successive approximation method requires a negligible number of external components. In this case, the operation of the circuit is not affected by crosstalk on the supply circuit.

    Proximity sensor in the phone. What is it? Mobile phones

    Many modern electronics products are equipped with sensors that detect the proximity of an object, such as a finger, to a keyboard or a person’s ear to a telephone. This technology is actively used in all kinds of touch panels, which eliminates mechanical switching of devices, as well as extends their service life. And many may well have a question: the proximity sensor in the phone. What is it and how does it work? Next, this device will be considered from the point of view of implementation by capacitive technology.

    Proximity recognition

    Proximity recognition using non-contact technology quickly found application in the field of portable devices that are self-powered. The function is actively used in the latest models of smartphones and tablets, in music players. Its main purpose is to improve the reliability of devices and save electrical energy.

    The display of the device will remain inactive until the proximity of the user’s hand is detected, and this is what the proximity sensor in the phone is responsible for. What is it. It will become clear if we consider the principle of its operation. When it comes to using this technology, it is worth noting that in standby mode, only the central processor deals with energy consumption. And when proximity sensors detect the proximity of the palm or finger, the display turns on, which displays the current information. All this allows you to reduce the average power consumption of the gadget, while increasing the battery life.

    Lock Screen iPhone 4

    The proximity sensor works in such a way that it allows you to turn off the smartphone screen during a call to prevent accidental key presses. There are special applications that allow you to lock the screen by simply swiping your hand over it. To turn it on, you need to press the hardware key.

    Capacity change detection

    How accurately and reliably the proximity sensor will work depends entirely on the accuracy of measurements of the changed capacity of the system. For this purpose, a number of methods have been developed, among which the most famous are charge transfer, successive approximation, capacitance interaction and the sigma-delta method. Two of them are most commonly used. Both use a switched capacitive circuit and an external measuring capacitor.

    Reboot

    This is a cliché in the world of smartphones, because it is after a reboot that users get rid of problems. This solution is suitable if the diagnostic program showed that the matter is in a system failure.

    Follow the steps in the following sequence:

    Press the “Power” button and hold it for a few seconds. Location may vary depending on model.

  • The shutdown button will appear on the screen.
  • Drag it from left to right.
  • Wait for the device to reboot.
  • If the cause of the malfunction is a system failure, then after rebooting the smartphone will work normally.

    How do professionals repair a device?

    Consider replacing the proximity sensor on the iPhone 5S model:

    Smartphone turns off.

  • In the lower part near the speakers, the screws are unscrewed.
  • The screen is removed with a suction cup.
  • On the right in the upper corner, 4 screws are unscrewed from the battery.
  • The part indicated on the screen is unscrewed.
  • The twisted camera is removed.
  • A new part is installed in its place.
  • The part is neatly inserted into place.
  • All bolts are screwed into place.
  • The screen is installed and screwed on.
  • All that remains is to turn on the phone and configure a new sensor. This can be done using special programs or through the settings of the smartphone.

    Software Update

    The update is only available over Wi-Fi, so turn on wireless. Then follow the instructions:

    Go to smartphone settings.

  • Scroll through the menu to the “General” item and go to it.
  • Select “Software Update”.
  • The next page will show the version available for download.
  • Scroll down the page a little and click on the “Download”.
  • After successfully downloading the updates, click on the “Install” button.
  • If you have a password, then enter a combination of characters.
  • Select “Accept”.
  • After that, the iPhone will reboot and the updates will be installed.

    Additionally, after rebooting, enter the key from the vault to confirm that you are the owner of the account.

    Reset

    The solution to the problem also applies to system crashes. To reset the settings, follow the steps:

    Go to device settings.

  • Find the “Reset” item in the main menu. It is located at the very bottom of the page.
  • Go to the main settings section.
  • Select from the general menu “Reset all settings” and click on the item.
  • Confirm the actions by pressing on the screen on the red inscription “Reset settings”.
  • Proximity sensor test

    It is very difficult to determine the exact cause of the breakdown without preliminary tests. A system failure or physical impact is to blame. Preliminary tests are required. To do this, you need to download the TestM program.

    How to check the proximity sensor on iPhone 5S, 5SE and so on if it doesn’t work:

    If everything is in order with the system, then the check will show that everything is fine and will offer to proceed to the next stage. If not, then report the reason.

    Also, the application will tell you about the location of the nearest technical centers, regardless of whether you are located in Kazan or other cities of the country.

    Sensor setup

    After replacing or restoring the proximity sensor on your iPhone, you will need to set up. To do this, you can use the programs:

    • Testm.
    • Special abilities.

    Disconnection methods

    If the sensor bothers you during calls, opens other applications, dials other numbers or stops working, then it can be disabled at the request of the owner. In what ways can you disable the proximity sensor on smartphones with Android:

    • Through the settings of your smartphone.
    • Through the installation of special programs. 2 programs will be considered. Smart Screen on / off and Sensor Disabler.

    Let’s analyze all the methods so that you can use the most suitable one. The options will be considered on the Android version from 9.0 Pie. The installed firmware can be checked by going to the “System” section in the settings and then “About the phone”. The line “Android version” will indicate the current.

    How to turn on the proximity sensor

    If you want to enable the option on your smartphone, you can use the same methods that are intended to disable it. How to enable the proximity sensor on Android:

    • Through the call settings on the smartphone.
    • Through third party applications.

    To do this, you will need to follow the same steps as indicated above, but to enable the slider must be green / blue, depending on the peculiarities of the color solution of the software of your device.

    Through the settings of your smartphone

    To turn off the option via smartphone settings, follow these steps:

    Go to the settings section of your smartphone and scroll down to the “System applications” section.

  • Find “Calls” among the available applications and go to the section to view detailed information.
  • Among the listed options, find “Incoming calls” and click on the line to go.
  • Find the item “Proximity sensor” and click on it so that the slider turns gray. This means that it will be disabled.
  • Through the installation of special programs

    First, consider shutdown using the Smart Screen on / off program. To do this, follow these steps:

    Find the program in the Play Store and install it.

  • After successful installation, open the application and click on the “OK” button to allow access to the device.
  • You will be redirected to the next page, where you need to click the “Activate” button.
  • You will be redirected to the main page of the application, where you need to move the largest slider to the left to disable the proximity sensor. It should turn red.
  • The last way to disable is through the Sensor Disabler app. To use this shutdown method, follow these steps:

    After saving the data, the parameter setting will be saved.

    How to disable, enable, configure the proximity sensor on Android

    The proximity sensor is located on the working side of the smartphone. It determines how close the object is to the screen. When it is brought too close to the face, it reads the information and turns off the screen for a while so that the user does not accidentally tap the applications on the screen. This option is especially relevant during a call. But what to do if the sensor is no longer needed, how to disable the proximity sensor on Android, it is faulty or needs to be checked?

    Sensor check

    But what if you suddenly noticed that the proximity sensor on Android stopped working on its own? A system failure is possible in which all the standard settings are lost. This can happen due to a fall of the device, download of malware, and so on.

    How to check the proximity sensor on Android, the easiest way:

    Go to the call section of your smartphone.

  • In the lower right corner, click on three dots and you will see available options for action.
  • Click on the “Settings” button and you will be redirected to the control panel.
  • Go to the section “Incoming calls”.
  • Scroll down the page to the Proximity Sensor and check the position of the slider. If it is gray, then it is off, move the slider to the right. If it is highlighted, then it is working properly.
  • Another way is to view the status of the option through the engineering menu. How to check with this method:

    In the dialing menu, enter the combination ## 3646633 ## and you will immediately see a list.

  • Scroll through the available options to the Hardware Testing tab.
  • Next, select the “Sensor” item and click on it to go.
  • Click on the “Light / Proximity Sensor” option.
  • Further “PS Data Collection”, you will be redirected to the next window, where you can check the operation of the option.
  • To check, click on the “Get One Data” button, and in the second line enter the number zero.
  • Place your hand on the screen and press the GOT button again.
  • If the number 255 appears, then the option is working properly.
  • The screen does not turn off when the iPhone is talking. What to do

    The first step is to check how the sensor works:

    Call another subscriber.

  • Remove iPhone from ear.
  • Close the sensor with your finger.
  • If the screen does not go out, then the problem is really in the sensor. Here it is worth remembering another possible reason. Incorrect auto-lock settings. Usually the user does not need to look there, but if this is the handiwork of malware, then it is worth downloading an antivirus.

    To understand that the iPhone does not go out during a call due to settings, you need:

    Go to settings menu.

  • Select the section “Basic”.
  • Click on the “Autoblock” section.
  • Activate the slider if it is not enabled for some reason. After that, it is additionally worth rebooting and trying again to check the screen lock during a call.

    Why the iPhone screen does not turn off during a call

    If during a conversation the display reacts to touching it with your face or ear, then the gadget has a hardware or software malfunction with the proximity sensor. It is he who is responsible for turning off the screen. It can still be seen at a certain angle of illumination next to the earpiece.

    Proximity sensor is next to the front camera and speaker

    Reasons why iPhone screen does not lock during a call? Several:

    • Proximity sensor covered with opaque glass, cover, sticker, fingers.
    • Moisture has entered and the sensor contacts are oxidized.
    • Software installation failed.
    • The owner uses a speakerphone to hear better (in this mode, the screen should not turn off).
    • The screen is damaged after a fall, and the crack prevents the sensor from recognizing the proximity.
    • Dirt stuck to the lens.
    • Low battery.
    • The user removed the anti-reflective coating that was installed by the manufacturer.
    • The repair service installed a non-original screen.
    • After the fall, the contact came off.

    Also, the problem is often encountered with devices that were sent for repair to replace the screen. Most likely, the master simply forgot to connect it or did it incorrectly.

    Note! Proximity sensor malfunction also prevents Siri from using voice assistant.

    You can check the operation of the sensor during a call by creating an obstacle in front of its lens at a distance of a couple of centimeters

    Screen does not turn off when iPhone is talking automatically

    When the first touchscreen phones were developed, manufacturers saw one design feature. When you put your smartphone to your ear, a variety of functions are activated. The problem was solved simply, now a special sensor turns off the display. But from time to time, iPhone owners do not lock the screen while talking, which, of course, causes a lot of inconvenience. Why and what to do with it. Below.

    Does not turn off during talk mode on other models

    If the proximity sensor is not working correctly on the iPhone XR, X, XS, 8, 8 Plus, you should make sure that there are no updates. For new iPhones, unlike the same fives, this is an important factor in the normal functioning of the entire filling.

    Note! Due to recent user complaints about errors when updating gadgets to IOS 13, you should activate iCloud backup before starting the procedure.

    How to reset the settings on an iPhone

    What to do if iPhone does not lock screen when talking

    If all of the above tips did not lead to success, and the screen does not go out on the iPhone during a conversation until now, then all that remains is to contact the service center. The great news is that specialists will replace the sensor itself without any problems if there is a breakdown. Or return the cable to its place if it disconnected during the fall.

    If the user has purchased an iPhone from an authorized retailer within a year or two, he is entitled to free service if the reason for the sensor breakdown falls within the terms of the warranty case.

    According to the law, iPhones are guaranteed for 2 years

    The screen does not turn off when talking iPhone 5s

    Focusing on the above reasons why the screen does not turn off when the iPhone is talking, it remains only to sort out the options, taking into account the most frequent calls from the owners.

    As for the 5th generation iPhones, including the S and SE, most often the problem lies in the cases. Today you can find absolutely any “exclusive” cover for the top five. Often it is he who imposes on the above-described sensor, and he stops turning off the screen during a call.

    Also, in the case of this model, it is worth checking the protective glass (if any). In view of the old age of the gadget, the market is flooded with accessories that were produced without meeting Apple’s standards.

    When installing a protective glass on the iPhone screen, you need to make sure that it will not cover the sensor