How to turn on silent mode on iPhone

IPhone Silent Mode vs. Do Not Disturb Mode Differences

IOS provides two ways to prevent your iPhone from ringing when inappropriate situations. For example, you can turn on silent mode (using the toggle located on the side) or configure the software Do Not Disturb feature. Both methods turn off the sound, but there are significant differences between them, which are not known to everyone.

turn, silent, mode, iphone

Silent mode on iPhone

The easiest way to turn off the sound on your iPhone is to use the toggle switch located above the volume buttons on the left side of the case. Surely many are already instinctively reaching for the switch, going to the cinema, school, church, etc., without even realizing it.

Calls and sound notifications included:

Calls and sound notifications are turned off:

The above method turns off the sound of calls, messages, notifications and even games, however, when an incoming call is made, the iPhone will still vibrate, and when an SMS is received, the screen will light up. You can turn off vibration by going to “Settings” → “Sounds, tactile signals” and moving the switch to the left opposite “Vibration in silent mode”.

Even though vibration will be disabled, the screen will still light up when there is an incoming message.

Do Not Disturb Mode

When Do Not Disturb is activated, the iPhone will remain silent and the screen will remain off for incoming calls and messages. However, you can set up exceptions so you don’t miss an important call.

There are two ways to enable Do Not Disturb mode. The simplest of them is to slide your finger across the screen from bottom to top, calling up the “Control Center”, and click on the crescent-shaped icon.

The crescent moon icon in the Control Center status bar will also indicate that Do Not Disturb is on:

You can also go to “Settings” → “Do not disturb” and slide the switch opposite “Do not disturb”.

You can choose a specific time when you want the iPhone (iPad) to go into silent mode (for example, at night from 23.00 to 6.00). In addition, the settings allow you to select contacts from whom you can receive calls even when the Do Not Disturb mode is activated. Allow Calls allows you to allow calls from everyone, anyone, selected users, or specific contact groups.

The “Repeated calls” option allows you to receive repeated calls from especially persistent ones, if they were made within three minutes after the first one. Silence mode lets you turn off beeps whenever or when iPhone is locked.

How to properly configure Do Not Disturb mode on iPhone, iPad and Mac, we talked in detail in this article.

When is Silent Mode or Do Not Disturb Mode Recommended?

The main difference between the above two modes is the glowing screen when receiving messages and notifications if silent mode is activated. If you are used to carrying your iPhone in your or bag, then there is nothing easier than mute the sound by sliding the switch with one movement of your hand. However, keep in mind that vibration can be just as annoying and eye-catching as a ringtone.

If you always hold the device in your hand, on your lap or on a table, then it is best to use the Do Not Disturb mode so that the luminous screen does not catch your eye and does not cause unnecessary attention.

How to reduce alarm sound on iPhone 11?

Go to the “Settings” “Sounds, tactile signals” menu. In the Ringer & Alerts section, drag the slider left or right to change the volume. As you drag, a beep will sound and you will hear the volume level.

How to Exit Headphone Mode in iPhone?

How to turn off headphone mode on iPhone?

  • Reboot the device (in all incomprehensible cases I do this);
  • Mechanical damage to the socket or blockage. Inspect and clean with alcohol;
  • Turn on and off the speakerphone;
  • Press the volume buttons.

How to increase the speaker volume on iPhone?

  • Go to the Library section, Preferences tab. In the com. Apple. celestial.
  • The plist document is then edited. There you will see the name of the regions and the value of the sound. For example, it could be 83%. You need to set 100% (number 1).
  • Reboot your device. After that, the smartphone should give out sound at full strength.

How to remove silent mode on iPhone?

There are two ways to turn Do Not Disturb on or off. Go to Settings Do Not Disturb to manually enable Do Not Disturb or configure a schedule to enable or disable Do Not Disturb.

How to remove the do not disturb mode?

  • Open Settings.
  • Select Notifications.
  • Click on the switch opposite the Do not disturb mode.
  • Mode disabled.

How to mute the camera on iPhone 11?

The easiest way to completely turn off the camera sound on most iPhones is to activate silent mode using the toggle switch on the left side of the device. When the mode is turned on, the display will show an inverted bell icon labeled “Silent Mode On.”.

How to turn off silent mode on iPhone without a button?

To make your phone truly quiet, you can turn off vibration in silent mode by going to Settings> Sounds. Locate the “Vibration in mute” switch and turn it to Off.

How to restore sound on iPhone?

Go to the “Settings” “Sounds” (or “Settings” “Sounds, tactile signals”) and drag the “Call and alerts” slider back and forth several times.

What is iPhone Safe Mode

You May Know iPhone Recovery Mode and iPhone DFU Mode and What is “Safe Mode” on iPhone?

IPhone Safe Mode is one way to run iOS on a jailbroken iPhone. Just like Safe Mode in a computer’s operating system, which helps you remove faulty processes that can cause operating systems to malfunction. IPhone Safe Mode lets you remove any problematic or faulty extension that could crash a jailbroken iPhone.

You will feel familiar with it if you have jailbroken your iPhone. IPhone Safe Mode can help you troubleshoot your iPhone or remove the underlays that are causing such problems. In short, iPhone will boot in safe mode while jailbreak extension crashes iOS.

oneRestart to Exit iPhone Safe Mode.

Reboot. this is the easiest way to turn off iPhone Safe Mode. Click Restart when you receive the Safe Mode pop-up message. This operation will return your iPhone to normal.

fourHard reset to disable iPhone safe mode

If your iPhone is frozen in Safe Mode and unresponsive, you can completely erase iPhone data to make it brand new. Here we bring you the powerful iOS Data Eraser, iPhone Eraser to help you get your job done.

iPhone Eraser is one professional utility that can help you remove all iOS files and settings including photos, videos, messages, password, call logs and more on iPhone, iPad and iPod touch. All junk files and faulty extensions on iPhone will be scanned and removed for free.

Step 1Click the download button above to quickly install and run iPhone Eraser on your computer. Connect your iPhone to it with a USB cable. It will recognize the iPhone automatically.

Step 2iPhone Eraser provides 3 levels, Low, Medium and High erasing. You can choose your preferred option based on your needs.

Step 2Click Start to completely erase all iOS data and settings. After that, your iPhone will exit Safe Mode and become new and normal.

3Hard restart to disable iPhone safe mode

Step 1Hold down the Power and Home buttons until the iPhone shuts down completely and restarts.

Step 2Release the buttons and wait for the start screen to appear. Here you can ignore “Slide to Unlock”.

How to turn Safe Mode on or off on iPhone

As an iPhone user, you may often hear about some of the main iPhone modes such as DFU Mode, Recovery Mode, and Safe Mode. Do you have a clear idea of ​​them? Do you know what iPhone Safe Mode is?

Disable Safe Mode on iPhone

This post will mainly talk about iPhone Safe Mode.In fact, for one reason or another, you will need to enable or disable Safe Mode on iPhone XS / XR / X / 8 / SE / 7/6/5 / 4. This post will give valuable information about iPhone Safe Mode. Also, you will learn how to turn Safe Mode on and off on iPhone.

Silent mode

Perhaps the easiest way is to simply mute your phone. precisely, put it in vibration mode. This mode was originally created to prevent the phone from making noise in public places, in cinemas, in cafes, and so on. But it also mutes a lot of system sounds. These include the sound of the camera shutter, as well as keyboard clicks and other similar signals.

It turns on simply. There is a small switch on the side of the iPhone that works in two positions. Take a look at it, if you see an orange sticker next to it, it means that the sound is already muted. If it is not there, then you need to move the switch to another position so that the sticker itself is visible on the side of it. Also, when switching to silent mode, the smartphone vibrates slightly.

After that, all sound signals will turn off, and the gadget will signal about calls and SMS only with the help of vibration. So after the photo session is over, it is important not to forget to return the switch to its original position.

How to get the sound back

It is enough to bring the phone out of silent mode by sliding the switch on the end of the device again.

Turn down the volume manually

On iPhone, you can control the volume of all system sounds along with music. To do this, it is enough to hold the volume swing at the end of the phone until the sound decreases to a minimum.

The problem is that, by default, in iOS, the ringtone and music volume are controlled by the same actions. Roughly speaking, while the music is off, you cannot control its volume. To get this opportunity, you must:

  • Go to the “Settings” of your device;
  • Go to the “Sounds” tab;
  • There is a Calls and Alerts item with a volume slider;
  • Under it there is a toggle switch “Control the keys”, which needs to be disabled;
  • After that, using the slider, you need to adjust the volume of calls and notifications to your taste and leave the settings.

Now the keys on the end of the smartphone control the volume of music and system sounds regardless of whether the music is on or not. Now you need to completely turn down the volume and enjoy shooting without unnecessary sounds.

In this case, calls and messages will come with a sound signal. Don’t worry about many missed calls.

How to get the sound back

You just need to turn up the volume. A couple of taps on the volume swing and that’s it, the shutter sound will return.

Using headphones

Another way to turn off the sound of the camera shutter and other system signals (or rather a way to hide them) is to connect headphones. The fact is that if you connect headphones or any other equipment to the iPhone that can receive an audio signal via a wire or via Bluetooth, then all sounds from the device (including all sorts of system signals, keyboard clicks and the shutter sound) will be played on the external device.

Therefore, if you connect headphones to a smartphone, then no one will hear the shutter sound except for the owner of the phone, who put on these headphones. So if you like the sound of the shutter, but you do not want to annoy the people around you, then just plug in the headphones.

It’s also a great camera remote. Many people use headphones while taking photos to take more interesting shots, as using the buttons on the headset can take pictures remotely without even touching the phone and the camera interface.

How to get the sound back

You just need to unplug your headphones. If this is a wireless headset, then you will need to disconnect it physically so that the signal is not transmitted via Bluetooth, or simply turn off the wireless connection on your smartphone. Ordinary wired headphones can be removed from the corresponding connector.

Ways to turn off the shutter sound

There are several ways to turn off this sound. Each has its own pros and cons, so we presented all the options for you, and you yourself will choose what suits you. At any time, you can return all the settings back, so do not worry.

Silent mode on iPhone

The easiest way to turn off the sound on your iPhone is to use the toggle switch located above the volume buttons on the left side of the case. Surely many are already instinctively reaching for the switch, going to the cinema, school, church, etc., without even realizing it.

The above method turns off the sound of calls, messages, notifications and even games, however, when an incoming call is made, the iPhone will still vibrate, and when an SMS is received, the screen will light up. You can turn off vibration by going to “Settings” → “Sounds, tactile signals” and moving the switch to the left opposite “Vibration in silent mode”.

Even though vibration will be disabled, the screen will still light up when there is an incoming message.

How to turn off silent mode on iPhone

IOS provides two ways to prevent your iPhone from ringing when inappropriate situations. For example, you can turn on silent mode (using the toggle located on the side) or configure the software Do Not Disturb feature. Both methods turn off the sound, but there are significant differences between them, which are not known to everyone.

How to turn off silent mode on iPhone 7?

The easiest way to turn off the sound on your iPhone is to use the switch located above the volume buttons on the left side of the case.

How to prevent calls on your iPhone?

In order to schedule automatic activation, go to “Settings”. “Do not disturb”. There, turn on the item “Scheduled” and specify the time “from” and “to”. During the specified period, the phone will not bother you. At the same time, it is possible to configure incoming calls.

How to restore sound on iPhone?

Go to the “Settings” “Sounds” (or “Settings” “Sounds, tactile signals”) and drag the “Call and alerts” slider back and forth several times.

How to change volume buttons on iPhone 6?

IPhone 6 and iPhone 6 Plus Volume Buttons Replacement

  • Unscrew the Pentalobe screws near the Lightining connector:
  • Lift the front panel of the device using a suction cup and a sharp-edged plastic tool:
  • Remove the five screws that secure the front panel of the device:
  • Remove the protective metal plate:
  • Disconnect all cables from the front panel of the device and remove it:

Change ringtone and vibration mode

On iPhone 7 and later, you can control the ringing and vibration settings from the Settings Sounds & Tones screen. On older iPhones, go to Settings> Sounds.

By default, the volume for ringtones and notifications matches the volume configured for audio playback. To control the ringtone and notification volume separately from other programs, turn off Change with Buttons. If Change with Buttons is disabled, you must manually adjust the ringtone and notification volume in the Settings Sounds, Tactile or Settings Sounds menu.

On the same screen, you can choose whether the iPhone should vibrate when you select Ring or Silent. If you turn off both options, iPhone will not vibrate.

Vibration setting

If you want to fine tune this mode, you need to refer to the settings. Before the 7th model, to do this, you must first go to the “Settings” item, and then open the “Sounds” section. On devices with the seventh iPhone and newer, another sub-item is used, which is called “Sounds, tactile signals”.

At the very beginning, it is indicated when the apparatus should use vibration. If you want it not to hum when activating the Silent function, move the corresponding slider to the left to disable it. An alternative is to change the vibration pattern. You can choose from preset sequences or program your own. In the latter case, use the “Create vibration” sub-item, and then draw the desired signal pattern by touching your finger in the graphic mode.

In the same section, you can get rid of other sound signals. For example, if you need not only to remove ringing / vibration, but also to disable the clicks of the virtual keyboard when typing or the signal that is given when the system is locked or unlocked. In this case, scroll through the settings to the appropriate item and deactivate it.

Features of silent operation

Please note that this silent mode on iPhone 6 and later does not affect other sounds. Accordingly, if you set the alarm clock in the “Clock” program, it will still play. The same applies to music playback or special effects in games.

Another feature is that if you make the silent mode on the iPhone as indicated above, when a headset is connected to the smartphone, then the sounds in it will still be heard. That is, the “silent” button only affects the sound reproduction through a regular speaker.

Finally, keep in mind that in silent mode of use, the smartphone will still automatically turn on the screen when a new message arrives or when it is necessary to show a notification. This won’t hurt if the iPhone is in your or bag, but if it’s in sight, this behavior can be distracting.

Putting iPhone into Ring / Silent Mode

When the iPhone switch is in the Ringer position, ringing tones, notifications, and sounds play through the iPhone speakers.

Setting the toggle to Silent mode does not play ringtones or notifications through the iPhone speakers, but does not muffle other sounds and vibrates.

These settings only affect the performance of the iPhone speaker. If you are using a headset with your iPhone, sounds will play through the headset even in Silent mode.

Do Not Disturb Mode

As you can see, there are many limitations to using a mechanical switch. Therefore, Apple has provided another way, how to turn on the silent mode on the iPhone. And even without displaying notifications and other distractions, in order to maintain the blockage state to the maximum and not once again distract the owner’s attention. for example, at an important meeting, during class, or while the owner is meditating.

The name of this function was given by the speaker. “Do not disturb” mode. The easiest way to activate it is using the control panel. To do this, make a swipe from the bottom up, from the bottom edge of the display (in the iPhone X, everything was slightly altered, the swipe must be done from the upper right corner).

Next, lightly touch the crescent moon icon to enable / disable. When activated, the icon will be highlighted.

Also, directly from the control panel, you can go to quick settings. To do this, you do not need to touch the icon, but press it with some effort. The system will display a menu with various options. activate for a specific time while you are in the same place or for the period of a scheduled event.

Another way how to set iPhone to silent mode is through settings. A special item is highlighted under it in the menu of the device. It is convenient in that it allows you to more accurately change the parameters of the mode.

For example, you can put the device into a permanently quiet mode. If you need to specify a specific time frame, use the “Scheduled” radio button and then specify the period. It’s so convenient to turn off notifications at night.

Additionally, you can specify a list of contacts, calls from which the phone will allow you to attract your attention. To do this, select the appropriate item and mark “favorites”.

detailed settings can be found in the official Apple help: https://support.Apple.com/ru-us/HT204321.

In addition to turning off alarms more efficiently, the Do Not Disturb mode solves the question of how to turn off the sound on the iPhone if the button does not work. after all, it is activated independently of the keys.

The Ring / Silent switch is on the left of the iPhone. It can be used to control the sounds played through the iPhone speaker.

How to set silent mode on iPhone

Apple makes premium smartphones, but sometimes some of the functions are difficult to figure out. from the habit after Android or just at the initial stage of use. For example, how to turn on silent mode on iPhone, as well as how to customize it to suit your needs. Immediately, we note that you can get rid of unnecessary sound in two ways, differing in complexity and capabilities.

Silent mode

To put iPhone in Silent mode, slide the switch to the position where the orange mark is visible.

Call mode

To put iPhone into Ring mode, slide the switch to the position where the orange mark is not visible.

Call mode

To put iPhone into Ring mode, slide the switch to the position where the orange mark is not visible.

silent mode

The first method includes turning on the silent mode. This option is responsible for turning off calls, replacing them with vibration. The easiest way to turn off the sound of your smartphone is.

It should be noted that in this mode the alarm clock works with normal sound. It’s easy to activate the option, just slide the slider on the side at the top of the case.

If desired, you can adjust the rest of the sound parameters.

In the Settings, you should find the section responsible for sounds, it is called “Sounds”. And set the necessary settings manually, you can change the style of notification when you receive SMS, incoming calls and notifications on the screen.

How to set silent mode on iPhone

The Ring / Silent switch is on the left of the iPhone. It can be used to control the sounds played through the iPhone speaker.

Putting iPhone into Ring / Silent Mode

When the iPhone switch is in the Ringer position, ringing tones, notifications, and sounds play through the iPhone speakers.

Setting the toggle to Silent mode does not play ringtones or notifications through the iPhone speakers, but does not muffle other sounds and vibrates.

These settings only affect the performance of the iPhone speaker. If you are using a headset with your iPhone, sounds will play through the headset even in Silent mode.

Change sound and vibration mode

To change your ringtone, sound and vibration mode:.

  • On iPhone 7 and later, go to Settings> Sounds, Tactile Cues. On older iPhones, go to Settings> Sounds.
  • Then tap the option you want, such as Ringtone or New Mail, and select a new alert.
  • If you need to adjust vibration, click “Vibration” and select the desired option from the list.

To create a custom vibration pattern, follow these steps.

  • Click Create Vibration.
  • Touch the screen, draw a drawing, then click Stop.
  • Click Play to test vibration.
  • When finished, click Save and give the vibration a name. You can click “Write” to change the custom vibration pattern.

To turn off the sound, as well as turn off the vibration in the iPhone (including the flash alert), you can use several options.