How to Turn On Flash On iPhone 7

How to turn on flash on iPhone 7 on calls and SMS notifications

Unlike androids and other phones, the iPhone 7 doesn’t have a dedicated indicator for notifications.

Instead, it has a feature for the deaf or hard of hearing that uses a flash to provide a visible signal for incoming notifications. This is in addition to the usual vibration already provided by the system.

Whether you need flash notifications on call or just want to turn them on, once you turn on this feature, all you have to do is leave your phone in sight so that you don’t just hear incoming notifications, you see them.

Your iPhone 7 will blink a flash when alerts for calls, SMS and messages arrive.

When enabled, the LED will blink several times for every call or message on the device, even if it is in silent mode.

This wonderful technology offers an obvious visual cue with a bright blinking light when any alert or notification arrives. a great feature that isn’t very well known, but I’ll show you how to turn it on.

How to set a flash on an IPhone 7 on a call

The use of LED flash for notifications is possible in all modern versions of iOS and iPhone devices. This is how you can customize this feature for your.

Click on the Settings app and then on General / General. Select “Accessibility / Accessibility” in Settings.

Find “Flash for Alerts” and click on that. Now flip the switch to the active green position.

Upon receiving an incoming message, phone call, or alert, the LED flash on your iPhone 7’s camera will blink to show a visual indicator that notifications or alerts are being received on the device.

Undoubtedly useful not only for those with hearing problems, but also really useful for those of us who constantly keep our phones muted, volume down or just want something more obvious.

This setting is supported by all modern versions of iOS, although it has been around for quite some time and this setting may look slightly different on newer and older models.

Note that once you enable LED alerts, you have another option to enable them when your phone is off. Also, this feature only works when your screen is locked.

Another useful option is the Call Alert feature, which can be found in Settings → Phone → Voice Calls.

Siri will announce the name of the caller to make it easier for you to decide whether you want to answer or ignore him.

You can choose to have Siri always announce calls, with headphones and car only, or with headphones only.

How to disable flash on iPhone 7

Keeping iPhone 7 in LED flash mode may adversely affect battery life.

How to Turn On Flash On iPhone 7

Therefore, you should consider disabling the mode as soon as you are done with the need to use this alert mode during calls and SMS notifications.

Actually, there is nothing to describe, since this is just the reverse process. Press Settings, General, tap Accessibility and scroll down.

There click on the LED flash for alerts. On the next screen, you can disable it by moving the switch to OFF (make it white). Also, disable on the mute option. Have a good day.

What to do if flashing doesn’t work

  • The flash during a call works only if the device screen is locked. If the reason was this, then nothing needs to be fixed.
  • Make sure your device model is IPhone 4 or higher, and that it has IOS 5 or higher.
  • Restart the device, sometimes it is necessary for the function to activate.
  • Try turning on the camera and taking pictures with the flash. If it does not work, then the problem is in the filling of the device and it must be taken to the service in order to get the help of qualified specialists.

The Flash Warning function is very useful for some people, but if it bothers you, then at any time you can deactivate it through the device settings. Sometimes, for the changes to take effect in the device settings, you need to restart the device.

Rate this article: Share with your friends!

How to turn on flash when calling on iPhone in iOS 10 in silent mode

How to make iPhone flash flash when making a call? Easily! This feature has been around in iOS for a long time, but with the release of iOS 10, there is an additional option. Now users can not only put a flash on a call, but also set a parameter in which the flash on an iPhone call will be activated only in silent mode. We will tell you how to do it right now.!

  • To configure the “blinker”, open the “Settings” application on your device. Open device settings
  • From the general list, go to the item “Basic”. Go to the section “Basic”
  • We pass to the subsection “Universal access”. Go to the section “Universal access”
  • In the “Hearing” section, go to the “Flash alerts” item. Go to the section “Flash alerts”
  • Enable or disable the Flash in Silent mode so that the function works or does not work accordingly while the device is in silent mode. Turn the function on or off
  • Activate or deactivate the Flash Alerts function to start or stop working accordingly. Enable or disable the function

Guide-Apple. How to make flash on iPhone 7 flash on call. How to enable the flash function for incoming calls and messages on the IPhone

If you often turn off the sound on your device, turn off vibration, put the phone face down, then the chance of missing an important call is very high. But Apple has provided a solution to this problem. the Flash Alerts feature, which is present on all the latest IPhone models. It works like this: when the device starts to call, the flashlight located near the rear camera starts to light up at regular intervals. Below is a detailed instruction to help you enable this feature.

How to turn flash on / off on iPhone when calling

If you want to stand out and put a flash when you call on your iPhone, then today I will tell you how to do this and enable or disable this feature on your iPhone.

Before starting a conversation about how to put this function on your phone, I would like to tell you a little why a blinking flashlight appeared during a call at all.

This feature is originally intended for people with hearing problems. But we can also quite use this, because the phone is not always in sight.

And if you turned on the music loudly, and the phone is at the end of the room, then the flash may well attract your attention and you will not miss an important call.

How to flash on iPhone when calling in iOS 10?

  • On an iPhone with iOS 10 on board, open the Settings app.
  • Find the General section, open it and look for Accessibility.
  • Scroll down a bit and find the Hearing section, it has the option Flash alerts. Push!
  • Here you can turn on iPhone flash and other alerts if you activate the top slider. If you activate the bottom option “Flash in silent mode”, the flash will automatically turn on during a call when the device is set to silent mode.

IPhone users with a version of the mobile platform below iOS 10 do not have the ability to set the flash to iPhone ringtone in silent mode. Only the first option is available to them. to turn on or off the flash for a call, depending on whether the smartphone is in silent or normal mode. Earlier we published detailed instructions. in essence, it is no different from this one except for the use of different versions of iOS.

After completing all the above steps, the flash will now flash brightly during a call to your device in silent mode. We must warn you that enabling this option may result in an increase in battery consumption on your iPhone. The function can quickly drain the smartphone.

How Blinking Call Works on iPhone

You did this and now when your phone receives calls or notifications, your flash will blink at the same time.

In the case when you use your smartphone and it is not in a locked state, the flashlight will not flash.

How to turn on flash on iPhone when taking photos

iPhone can be used not only as a means of making calls, but also for taking photos / videos. Sometimes such work takes place at night and that is why Apple phones have a camera flash, as well as a built-in flashlight. These functions can be either extended or have a minimal set of possible actions.

Which iPhone notifications are covered by this feature

Unfortunately, the functionality of the apple operating system does not provide for enabling / disabling visual notifications for certain smartphone applications. So, what warnings the flash will fire:

  • Incoming calls;
  • Incoming SMS and MMS messages;
  • Wake up call;
  • Notifications from social networks and other apps.

What to do if iPhone does not support flash on call How to change the brightness of iPhone visual notifications

Many modern smartphones, like iPhones, have notification indicators. Usually this is a not too conspicuous light that flickers or glows in a certain color when there are unread notifications. But the developers of the apple gadget decided to make this feature very bright and noticeable. Despite its obvious benefits, this option quickly becomes annoying. But you still won’t be able to reduce the brightness. The only way out is to turn off the warning flash.

As you can see, it is very easy to install a flash on an iPhone when you call, in fact, you can just turn it off. We hope that in the future Apple will take care of its users and improve the functionality of this useful option.

Retina Flash, first introduced on iPhone 6s and 6s Plus, converts your smartphone display into a flash for taking selfies with the front (front) camera when needed.

In truth, the front camera has always been the iPhone’s weak point. With the introduction of a 5-megapixel FaceTime camera in the iPhone 6s, this problem was solved, and with the release of the iPhone 7 (and still), the front camera allows you to take pictures with a resolution of 7 MP. As a reminder, previous generations used a 1.2 megapixel camera.

Whatever the resolution, if the lighting is not enough, then the photos will be of poor quality. The main camera on iPhone has long been equipped with an LED flash, which is not the case with the FaceTime camera. Taking selfies at a party or club with an iPhone has always been quite problematic due to the lack of light.

Turning on the flash as a flashlight

The flash can be either instantaneous or continuous. The latter is called a flashlight and is turned on via built-in iOS tools or using a third-party application from the App Store.

Flashlight application

By downloading this application from the link below, the user gets the same flashlight, but with advanced functionality. You can change the brightness and set up special modes, for example, its blinking.

    After opening the application, click on the power button in the middle. the flashlight is activated and will be on constantly.

The following scale adjusts the brightness of the light.

The “Color” button changes the color of the flashlight, but this function does not work on all models, be careful.

By pressing the “Morse” button, the user will be taken to a special window where you can enter the necessary text and the application will start broadcasting the text using Morse code using the flashlight.

If necessary, activation of the SOS mode is available, then the flashlight will start blinking quickly.

Standard flashlight

The standard flashlight in iPhone differs on different versions of iOS. For example, starting with iOS 11, it got a brightness adjustment feature, which was not there before. But the inclusion itself is not very different, so the following steps should be taken:

    Open the Quick Access Toolbar by swiping up from the bottom of the screen. This can be done both on the locked screen and by unlocking the device using a fingerprint or password.

Click on the flashlight icon as shown in the screenshot and it will be turned on.

Flash on call

IPhones have a very useful feature. turning on the flash for incoming calls and notifications. It can be activated even in silent mode. This helps you not to miss an important call or message, because such a flash will be visible even in the dark. How to enable and configure such a function, read the article below on our website.

The flash is a very useful function both when photographing and filming at night, as well as for orientation in the terrain. For this, there is third-party software with advanced settings and standard iOS toolkit. The ability to use flash when receiving calls and messages can also be considered a special feature of the iPhone.

Thank the author, share the article on social networks.

How often it happens that we missed a call or an important message. It also happens that, without hearing the sound of notifications, we do not check the smartphone for new calls or alerts for a long time. To help you not to miss important events on your phone, turning on the flash blinking when receiving notifications will help. We will now tell you how to set up this function in iPhone.

How to turn on flash on incoming calls for iPhone

To turn on the LED signal for incoming calls, go to the “Settings” menu, and then “General”. “Universal access”. There, in the “Hearing” section, switch the slider to the “On” option opposite the line “Flash alerts”. It is disabled by default. By the way, if you wondered why this section contains the option of visual indication for a call, then everything is quite logical. It was originally designed for hearing-impaired users. But this option is so fond of that now others are actively using it.

Note. that “Flash Alerts” only works for a locked gadget. And if you are using your iPhone now, the LED will not blink. Therefore, if you want to test the operation of this function, wait until the screen goes out and the system goes into sleep mode. If the flash still does not fire on an incoming call, restart your smartphone. For early models, this action helps to activate the setting changes. Another common problem with this function is a physical malfunction of the indicator. Try to activate it on the camera and check if it works.

On the one hand, Alert Flash is a powerful way to draw your attention to new notifications and calls on your iPhone. But on the other hand, it is a significant battery drain. Plus, this option can get annoying quickly. If you want to turn it off, do all the steps in the same order as when you turned on the flash, only now set the status to “Off”.

Turn on flash for photos and videos

When taking a photo or video on an iPhone, the user can turn on the flash for better image quality. This feature is virtually customizable and is built-in on iOS phones.

  • Go to the “Camera” application.

Click on the lightning bolt in the upper left corner of the screen.

  • In total, the standard iPhone camera application offers 3 choices:
  • Turn on autoflash. then the device will automatically detect and turn on the flash based on the external environment.
  • Simple flash activation, in which this function will always be on and work regardless of external conditions and image quality.
  • Flash off. the camera will shoot normally without applying additional light.
  • Which models have flash on call function

    For which iPhone models are our recommendations suitable:

    • iPhone 4 and 4s;
    • iPhone 5 and 5s;
    • iPhone 6 and 6s;
    • iPhone 7;
    • iPhone 8;
    • iPhone X and Xs (or iPhone 10 and 10s)
    • iPhone 11 and 11 Pro.

    This feature first appeared on iOS 5. And until now, the developers have not removed it, since they consider it really necessary and in demand. Well, starting with iOS 10, the option has been supplemented with the “silent” mode.

    How to enable blinking flash alert for calls on iPhone

    The previous instructions on how to turn on the flash are suitable for owners of mobile devices with iOS versions 5 to 12. But today, almost all fans of mobile firmware use version 13, and in it, the developers organized the device settings a little differently. The flash function for notifications remains in place, it can still be activated and used on a mobile phone.

    Block incoming calls on iPhone

    If you’re tired of answering phone calls from advertisers, unknown callers, and other contacts, set up your iPhone to only accept calls from certain people. So to speak, from the circle of trust of your environment.

    In Apple mobile devices, this is done quite simply, with built-in tools:

    • Go to phone settings;
    • Select the “Do not disturb” item;
    • Activate the Do Not Disturb mode at the top. Its action is indicated by the crescent icon, which will appear at the top in the status bar;

    You can create separate groups and name them accordingly, for example, “Work”, “Friends”, “Acquaintances”, etc. You can use these groups in the list to block, allow or prohibit them from calling you.

    How to set any song to an incoming call on iPhone

    Any mobile device has a default ringtone. But we want to replace it with the song of our favorite artist. You can change it without connecting to a PC. To do this, we need to download an application from the App Store called GarageBand. As well as a browser that can download MP3 from the Internet, such as Aloha Browser

    We install it on the phone and download the track that we want to set as a call. It’s as easy as turning on flash notifications on your iPhone.


    • To open the downloaded file, click the arrow at the bottom of the window and select the folder that is intended for downloads by default;

    If you have already turned on the flash for calls or notifications in the iPhone, then non-standard melodies will also be accompanied by a light indication. If you want to create a ringtone from a song that is already in your library, you can do without downloading, that is, without the browser “Aloha”. And immediately open the melody in the GarageBand app. You can even create musical pieces of your own composition in it. And also edit ready-made tracks, setting them immediately to the call.

    To turn on the flash on your iPhone, you need to do the following:

    • Select the settings icon on the main screen of the phone;

    Now notifications that will come from other applications on the iPhone will be accompanied by flickering flashes of the backlight or flashlight

    Check the effect of this function! To turn it off, you need to go back to the settings screen and move the knobs to the opposite position. If on your phone these settings did not work after activating this item, try restarting your phone and check again. This sometimes happens on older iPhones.


    • To enable it, open the iPhone settings;

    Flash in silent mode will be a great addition, as we will not be able to find out about incoming notifications or calls.

    Setting up notifications on iPhone without flash

    With the new iOS 13, users have the ability to customize phone notifications for all apps or for each one individually. By default, notifications are enabled for a new program. And any changes in it will be displayed as alerts. But our smartphones often have a lot of programs that leave notifications. And often there is an information flow of messages when we return home and connect the phone to the Wi-Fi network.

    How to turn on flash notifications on iPhone

    All mobile phones today have a useful feature. This article will show you how to turn on the flash for any notifications or calls on your iPhone. This type of notifications in the phone is not only decoration or entertainment, but also helps to draw attention to the device at the right time for people with hearing impairments.

    • How to activate flash on notifications on iPhone with iOS 10
    • How to enable blinking flash alert for calls on iPhone
    • How to set any song to an incoming call on iPhone
    • Setting up notifications on iPhone without flash
    • Block incoming calls on iPhone
    • Video instruction

    If you need to set up notifications for each app on iPhone:

    • Open the settings;
    • Select the item “Notifications”;

    Thus, you can turn off any of the proposed list. Select each and turn off the notification for which the flash has been configured. You can also configure some parameters of messages in this window.

    How to turn on flash when calling on iPhone

    Depending on the circumstances, it can be very easy to miss an incoming call on your iPhone. However, iOS has several useful features that prevent you from doing this. For example, a flash on a call. In this article, we will just show you how to turn on the flash when you call on iPhone.

    Visual notification of an incoming call (flash when ringing on iPhone) was developed by the manufacturer for people with disabilities. However, this function, which is a blinking flash, has proven to be in demand among many people without physical limitations. A lot of users are interested in how to turn on the flash when calling on the iPhone when they call. on this below.

    Flashlight for calling on iPhone is really useful not only for people with hearing impairments, but for everyone else in many situations.

    The standard means of notification of an incoming call on the iPhone is, as you know, ringtone and vibration. IPhone owners are given the opportunity to set their own ringtone as a ringtone. In addition, they can choose a separate type of vibrating alert for a specific contact. This is enough for many, but there is another possibility that is also of interest. In order to put the flashlight on the iPhone call, you only need a few taps and swipes. Read on to find out how to turn on the flashlight when you call on iPhone.

    How to put flash on iPhone ringtone

    • Open the Settings app and select General.
    • Now select the Accessibility section.
    • Scroll down to the Hearing section.
    • Select Flash Alerts.
    • This is where you can set the flash when calling on the iPhone. It can work only in silent mode or always.

    As soon as you turn on the flash when calling on iPhone, you can turn it on silently. The flashlight on iPhone calls only works when the device is locked. If it is not blocked. the home screen is active or some application is running, the flash will not light up with an incoming call. the call notification will be visible on the screen itself. This was established by the manufacturer for a reason; this saves battery power.

    We made sure that the answer to the question of how to put the flash on the iPhone when making a call is quite simple. this is done in a couple of taps. Simple actions add a third type of notification to the vibration alert and melody. visual.

    How to remove flash on iPhone when making a call

    This is done just as easily, just go back to the settings and turn off the same option.

    Now we figured out the question of how to put the flash on a call, as well as how to turn off the flashlight on the iPhone when making a call. Let’s hope that this instruction will be useful to everyone who was looking for an answer to it and would like to test this feature of their smartphone in practice.

    Despite the fact that most of the standard types of notifications are enough, perhaps this option will be more suitable for ordinary users in some situations. Even if not, it is always interesting to learn about the unexplored functions of your gadget; in any case, knowing about the availability of such a possibility will not be superfluous.

    How to turn on flash when calling on Android, like on iPhone

    By Anastasia September 22, 2017

    You can notify about an incoming call or SMS on your smartphone not only with a melody and vibration. For additional signaling about an event, use the camera’s flash. it will flash, drawing your attention. This feature is most commonly used on iPhone 5, 7, or SE, but you can customize it on Android too. Let’s figure out how to turn on the flash on Android when making a call like on an iPhone. using the capabilities of the OS and third-party applications.

    Android tools

    In a number of devices, the flash for Android calls is turned on directly from the main menu, without installing additional applications. How to put a flash on a call: look for the “Accessibility” subsection, in it the “Hearing” parameter group. Activate the “Flash Alert” or “Flashing Alerts” option. Item names may differ slightly depending on Android version.

    On some devices, the desired function is hidden in the section System applications. Calls. Inbox. Flash notification. Now the flashing backlight is connected, it is activated during a call or SMS. If the function is disabled in the menu, there will be no light alerts.

    Third party applications

    If you want more flexible control of the backlight on a call or there is no function to turn it on in the standard Samsung or ASUS menu, you will have to install a new application. On Google Play, you will find dozens of different programs for the request “flash on call”, highlighting the most popular and convenient.

    CallFlash knows how to turn on the flash on a call. In the application, you can separately configure the blinking mode for calls and SMS by setting the time to turn on and off the glow in milliseconds. A list of programs, in which notifications do not need to be signaled, and a “silence” period, in which the backlight should be automatically turned off, is set.

    After installing CallFlash, on the first screen, click “Test”. If the flash is on fire, click “Continue” and set the glow parameters. If the light does not appear, open access to notifications in the main settings of the phone by clicking on the item “Flash on other Notification”.

    The Flash Alerts 2 utility knows how to make the flash flash on your smartphone when you call. It also allows you to adjust the blinking frequency and set the list of applications in which notifications will be highlighted.

    • Incoming Call. blinking when calling.
    • Incoming Text. when SMS arrives.
    • Status Bar. when a notification is received in the status bar, available only in the paid Pro version.

    In the “Flash Pattern” item, set the duration of burning and off the backlight to create an individual blinking mode.

    A lot of parameters and a Russian menu are in the Flash on call program and applications. You can choose: use the backlight of the front or rear camera for notifications, set the glow duration, set separate parameters for different applications, turn off the function when the smartphone battery power is critically reduced.

    The application has a paid version, with an advanced package of settings.

    We figured out that it’s easy to turn on the flash when making a call on Android. The fastest way to activate the function is through the standard menu, for more flexible control of settings, install an additional application. Please note that you should not install several utilities for controlling the flash at once. there will be a conflict, and none of them will be able to work correctly.

    Common mistake: forgot to turn off the flashlight on your phone

    When you press the power button on an iPhone, putting it into sleep mode, you turn off the flashlight, right? No!!

    People walk around with glowing s because they don’t know how to turn off their iPhone flashlight. To do this, you just need to go to the checkpoint and turn off the flashlight after using it. Otherwise, Flashlight is only disabled on your phone after you turn off your phone completely or your battery is completely discharged.

    How to turn on the flashlight on iPhone 4, 5s and 6 and put it on a call

    What to do if darkness has already fallen and there is no flashlight at hand? Can’t read the menu in a restaurant in dim light or are you coming home late at night? We advise you to grope for an iPhone in your. The good news is that the iPhone comes with a bright flashlight, you only need to turn it on.

    So, in this tutorial you will learn:

    • How to quickly turn on the flashlight on iPhone via Control Center
    • How to disable the Flashlight app so you don’t waste your battery
    • What to do if the standard iPhone light does not work (general error when the camera and flashlight do not work in iPhone 5s)
    • Can I put a flash on a call? (Yes!)

    By the way, if you are not interested in the iPhone and you are a smartphone user with Android OS. here you can download the flashlight application for Android.

    What is iOS Control Center

    Control Center is for accessing basic iPhone features. You can open it from almost any screen, you don’t even need to enter a password for this.

    Control Center Window

    How to turn on the flashlight on iPhone 4 (5, 6)

    To open Control Center, swipe at the bottom of the screen. A box with several icons will appear. In the lower left corner you will see a small flashlight icon.

    Click on it to turn the flashlight on or off on the iPhone. It should be noted that this activation method works with such iOS devices as iPhone 4, iPhone 5 and 5s. And with later models of the phone, the methods are similar.

    How to turn off the flashlight on iPhone

    Disabling a widget is very simple:

    • Go to Control Center
    • Find the flashlight icon and click on it
    • Make sure that the camera flashlight is off by turning the phone cover towards you.

    Don’t forget about the battery. If you have problems with fast battery drain, I advise you to read the article in which I collected tips on how to save battery drain. Although the text is intended for Android users, iPhone owners will find a lot of universal advice in it.

    Flashlight by Rik

    Free flashlight for iPhone, without ads, works very fast (while taking up only about 100 Kb of RAM), excellent interface and correct work on iPhone 5, 6 and for outdated iPhone 4s. I advise you to place it on your home screen to keep a bright flashlight always at hand. A great solution if the flashlight on iPhone 5 is not working.

    Why iPhone flashlight doesn’t work

    If the flashlight does not work on iPhone 5s or earlier / later models, then, most often, this is due to an iOS software bug or Control Center. In this situation, we can advise you to go to the Appstore and install alternative applications to turn on the flash on the iPhone.

    We’ve rounded up a selection of flashlights that can be a great option if your iPhone’s flashlight doesn’t turn on in the usual way.

    Flashlight XS: turn on flashing on iPhone

    Flashlight XS allows you to turn on flashing on iPhone in the most urgent situations. Among other things, this is a really good solution in case the flashlight on the iPhone does not work. The application starts instantly, because it combines all the advantages of iOS optimization. Unlike, say, some other flashlights for the phone, which sometimes simply “fly out” and do not turn on.

    SOS My Location. Personal Safety App

    If you need a flashlight for purely practical purposes, then this app combines SOS alarms, GPS tracker and a powerful, bright flashlight for iPhone. Works on both iPhone and iPad.

    How to enable flashing on iPhone 4S

    I will say right away that the algorithm of actions for this version of smartphones is similar to the previous one. But at the same time, some differences should be noted and the reason for their appearance. In fact, these devices are capable of supporting operating system updates to 9.3.5, but the silent blinking option itself became available only in iOS 10. So if you are using an iPhone 7 device or some other model that has not been updated to the latest version, the option can be configured like this:

    • go to Smartphone Settings, select “General”;
    • go to the universal access section;
    • also find the “Hearing” section and turn on the “Flash alerts” slider.

    At first glance, everything is similar, but at the same time, in earlier versions of the OS, the function of interest to us was represented by one line, already starting from a dozen, it was allocated its own section, which opens in a separate window, although it has only two characteristics.

    How to turn on the flash on iPhone when they call

    Hello. With the advent of mobile gadgets with modern cameras with high quality shooting, the need for a camera for many users has simply disappeared. Cellular flagship cameras boast extensive functionality, among which the flash stands out. And if everything is clear with Android, the owners of Apple devices are often interested in the question of how to turn on the flash on the iPhone when they call.

    Turn off the indicator

    On some newer iPhones, blinking is already activated. After the purchase, the device may flash, and an inexperienced user is afraid that when he calls, the device lights up near the main camera. There is no need to panic and worry about a malfunction, because if necessary, the function can be easily deactivated. Also go to the accessibility settings and in the Hearing section, turn off the LED notification.

    The author recommends:

    Function does not work

    If you did everything according to the instructions, but the blinking did not work, you will have to pay special attention to some of the nuances. First of all, check the iPhone lock. You will not be able to see the light effect if the device is now in active mode and its display is lit. This is a prerequisite for saving battery power, besides, there is little point in additional illumination and notification if you hold your smartphone in your hands and see for yourself that they are calling you.

    The next moment. the call is in a vibration state. Most experienced users have noticed that after deactivating the vibration alert, the option starts to function. One tip. don’t forget to turn on silent mode. If these parameters are normal, and the flickering light, when they call, did not appear, the cause of the failure may be incorrect operation of the operating system. In such a situation, it is necessary:

    • go to the accessibility settings;
    • disable LED notification;
    • return to the home display by pressing the main round Home button;
    • a reboot is required, it can be done by pressing the Home key and the Power button together until a white screen appears with the “apple” logo in the center.

    After the device boots up, you need to repeat the above procedure to turn on the flash on your OS version. Find the Vibration section in the accessibility settings and click on it, then move the slider to the left so that the vibration mode is disabled.

    What is LED flashing used for??

    Interestingly, the burning “dot” was first introduced on 4S generation phones. For the fourth iPhone, such additional functionality had to be purchased separately, such a mini-device was called iFlash. It plugged into the charging connector and improved the quality of shooting in low light. That time has passed, and now photo illumination has become an obligatory component of “apple” gadgets.

    Today, she not only helps in taking night photos, but can also do the work of a flashlight. Another function is notification of various events, for example, missed calls, SMS, alarm clock. The latter function will be especially relevant for people with hearing problems, if they do not hear the signal, they can immediately see the flash on the iPhone when the alarm is ringing or playing.

    Many users want to enable this option, besides, the device blinking interestingly when making a call is visually very pleasant.

    Activating the option on new generation iPhones

    Let me note right away that the light notification is quite simple to turn on, you can do it in a few steps. The algorithm that I describe below will work for iPhone 5, 6, 7 (and all Plus and S editions) running iOS.10 or later. If you want to turn on the light notification when they call, you must:

    • go to Smartphone Settings, select “General”;
    • look for the “Universal Access” sub-item and go into it;
    • go to the “Hearing” parameter group, look for “Alert flash”;
    • switch the slider to ON.

    After these steps, you can use the device as a convenient and bright flashlight when making a call, see incoming notifications or play an alarm.

    It is worth recalling that in the “Flash alerts” menu there is also an option “Flash in silent mode”. when you turn it on, you can see the blinking of the iPhone only if the special switch on the left side of its case is set to silent mode (when the phone rings silently). If the incoming one is with a melody, you will not see the LED backlight.

    Turn on the flashlight

    I think it would be appropriate to remind you how to turn on the flashlight. This option appeared in the iOS 7 firmware. The icon of this very tool is located in the Control Center tab. Many users use it more often than flash when shooting. You can activate the flashlight by unlocking the iPhone with the Home key, open the above tab from below and press the button on the left side with the image of the device we need.

    Once activated, the flash will work in the desired mode. To disable, these steps are repeated. I would like to note another interesting option for turning off the flashlight in the “apple” device. “wake up” the smartphone and press the trailing Camera key, it is located in the bottom right corner. After this action, the display twitches slightly and the flashlight goes out.

    How to turn on the flash on iPhone when they call? As you can see, this is very simple to do and, if desired, it is easy to deal with it. So if you do not want to miss important calls, notifications. activate this option immediately after purchase.

    How to turn on flash when iPhone calls

    In order for the flashlight of your iPhone to flash when you call, you only need to change one parameter in the settings of your phone.

    To get started, open the main settings of your phone, for this click on the “Settings” icon on the screen.

    Scroll down a bit and select the “General” menu item.

    In the next tab, find the line with the name “Universal Access” and click on it.

    Scroll down the menu a little down to the category called “HEARING” (yes, in general, the option to flash the flash on a call is positioned as an aid for the hearing impaired), and put the switch opposite the “Flash warnings” item to the “On” position.

    As a result, when an incoming call or message (even if it came, for example, in Viber), your phone will blink a flash. What the iPhone flash notification looks like is actually clearly demonstrated by the following video.

    How to put flash on iPhone ringtone

    Many iPhone users often wonder why Apple does not think to build an LED into the phone to indicate various events, because this is really convenient, especially when the phone is in silent mode.

    Surprisingly, most iPhone owners do not even realize that this functionality can be implemented using the flash of their phone. We will tell you how to turn on the flash when calling on the iPhone using standard means in this article.

    Indeed, in order to put a flash on an incoming call of your iPhone, you do not need any Jailbreak or installation of additional applications. This functionality is present in iOS by default, it’s quite difficult to find it and guess what it does.

    I don’t think it’s worth talking about the fact that a blinking flash on the iPhone when you call will help you not to miss an important call. And if your phone is in silent mode, then the flash blinking when the iPhone is ringing is generally the only way to notice an incoming call when the phone is facing down.

    How to turn off the flash on iPhone ringing

    If you are tired of your iPhone blinking the flashlight every time you receive a call, you can disable this option without any problems. To do this, follow the reverse procedure described above, and in the menu set the slider to the off position. As a result, flash blinking on calls and notifications will be disabled.

    Now you know how to make a flash on iPhone on a call and how to turn it off if you get tired of it.