How to sync Xiaomi headphones with each other

On your iPhone, go to the Home screen. Open the case containing the Airpods and place it next to the iPhone. Your iPhone will display an animated setup splash screen. Click “Connect” and select “Done”.

Press and hold the buttons on both earbuds for 15 seconds. After the indicator flashes red and white alternately three times (and then flashes again), release the buttons and return the earbuds to the charging case. Remove Redmi AirDots from the list of paired devices on your smartphone if they are there.

There is a small button on the back of the charging case body, press and hold it for a few seconds. Release the button as soon as the indicator light between the earphones flashes white. Airpods will appear in the pairing menu on your device, select them and follow all further instructions.

  • Go to iCloud.com from your smartphone or PC, log in to your personal account using your login and password.
  • In the “Find Devices” section, upload a map of your location.
  • Select the headphones connected to your device.
  • Increase the area of ​​possible loss of headphones.

If Redmi AirDots do not connect to each other, the headphones should be synchronized by resetting the wireless headset. To reset Xiaomi AirDots, perform the following steps: Turn off the headphones. Press and hold the touchpads until the indicators turn red.

Bring the Airpods closer to the phone and open the case On the back of the headset, feel for the round button and hold it down for a few seconds until the light on the front of the case starts flashing white Look at the smartphone screen. the headphones should appear in the list of unpaired devices

This means that the headphones are completely reset. We put them in the case for 3 seconds, take them out of the case again and wait until the left earpiece synchronizes with the right one and emits a short connection signal, after which you can initiate the connection to the phone again.

How to Fix Earbuds Problem Connection to each other. SOLVED

  • Pinch and hold both earbuds until you see a double purple-red flash. This is a signal that you have reset the settings.
  • Put them in the charging box for a while, take them out and wait for the devices to “find” each other
  • Go to your smartphone’s Bluetooth settings.
  • Recharging the headphones.
  • Taking them out of the case.
  • We hold the touch button on the headphones (sometimes you need to hold only one) for 5 seconds to turn them off
  • We press the touch buttons and hold them for 20-40 seconds
  • Put the headphones in the case and close it
  • Everything is ready, you can connect!
  • Turn on the headphones and the Bluetooth module on your smartphone.
  • Go to the phone menu, find the Bluetooth tab, enter it.
  • You will see a list of devices that are in range of the signal
  • Click on the name of the device. the smartphone will try to establish a connection with it.

The instructions for using the headphones are very simple. To connect the i12 TWS to your smartphone, you need to turn on Bluetooth on your mobile device and remove the earbuds from the charging case. Next, go to the Bluetooth menu on your smartphone, and connect to the headphones. Ready!

To work separately, you just need to put one earpiece into the case. The connection will be to the earpiece outside the case. Or in the opposite case, when connecting from the case, on the contrary, remove the unnecessary earpiece to connect to the remaining one. Also, in some models, it is possible to simply turn off the earpiece by pressing the button.

Press and hold the buttons on both earbuds for 15 seconds. After the indicator flashes red and white alternately three times (and then flashes again), release the buttons and return the earbuds to the charging case. Remove Redmi AirDots from the list of paired devices on your smartphone if they are there.

  • Put both Airpods into the charging case;
  • Open the cover and check the status indicator light.
  • Connect the case to a power source, close the lid and wait 40 minutes;
  • Then open the lid, press and hold the setting button on the back of the case for a few seconds.

Activate pairing mode on your Bluetooth headphones. Press and hold the power button or the ID SET button. Release the button when the indicator starts flashing quickly. Bluetooth headphones enter pairing mode.

Connecting to a portable speaker JBL Go 2 using Bluetooth.

  • Activate Bluetooth on your mobile device.
  • Turn on the power of the audio system (Power key), then turn on Bluetooth (Bluetooth key).
  • Add the audio system to the list of devices connected to your smartphone or tablet.

How to properly sync Xiaomi AirDots headphones with each other

Put both earbuds into the charging case, wait until they are fully charged. Erase the data on the previous connection with AirDots from the smartphone settings. Go to the Bluetooth section for this.

Take the case, take the earbuds out of it.

Disconnect the headphones: on each of the plugs, press the touchpad / button with your finger (recall that the sensors have AirDots from Xiaomi, and the mechanical buttons on Redmi AirDots). It is necessary to press the physical or touch controls for 5 seconds, or rather until the indicator light turns red. Headphones should then turn off.

Now you need to do two resets (resets).

  • The first reset deletes the Bluetooth device information that has been stored in the headphones. Hold the touchpads on the earplugs for 10 seconds. The red and white lights flash alternately and then turn off. Do not release the sensor/button, keep pressing further to reset number two.
  • The second reset erases the pairing data between Airdots. Without releasing your fingers from the sensors after the first reset, press them for another 10 seconds. Wait for the moment when the light signals appear again. This time, the red and white signals should blink alternately 3 times.

In general, you need to press the sensors of the headphones for 20 seconds, and the LED signals will appear at the 10th and 20th seconds.

Turn on your dots. This is done by pressing buttons or sensors that you need to hold for about five seconds. Or do it in another way: put the headphones in the charging case, and then remove both “dots” from it. Wait about three seconds. The Airdots will be automatically turned on and paired between them. You will notice that the LED on the right “ear” will blink white, and there will be no light signal on the left. Flashing white means that the synchronization is completed, and now the R earphone, that is, the right one, and along with it the left one (since they are already paired) are ready to connect to the phone.

Activate Bluetooth on your phone to start searching for the earpiece. After a few seconds, you will see the found device Mi AirDots BASIC_R. R is the designation for the right plug, in a pair it is the main.

How to connect both Xiaomi AirDots earbuds, pairing with each other

Xiaomi AirDots wireless headphones are rightfully very popular among owners of not only Android smartphones, but also Apple fans. This is explained by the optimal combination of quality headphones and an attractive price. However, Airdots users often face certain problems. On the forums, you can often see messages that the headphones are disconnected, do not mate and do not work in pairs and with each other.

Perhaps you also found yourself in a situation where Redmi AirDots no longer paired normally, and because of this, you can often use only one earbud, right or left. What to do to legalize both “dots” again?

When does AirDots get out of sync?

The experience of many AirDots owners shows that from time to time Xiaomi headphones lose connection with one another. This is noticeable mainly by the out of sync sound. This can happen for various reasons. It happens that the battery charge of one of the “dots” runs out earlier than the second. Or have you previously used mono mode, that is, you connected only one earphone to your smartphone. This connection option is stored in the AirDots memory, and the next time both headphones can not be paired at the same time, they are not synchronized. A detailed instruction, consisting of the steps that we described above, will help you correctly pair the Airdots, and then connect both earbuds to an Android or iOS device.

See also  Xiaomi Mi band 4 can be wet

If the Bluetooth headphones are on, turn them off. Activate pairing mode on your Bluetooth headphones. Press and hold the power button or the ID SET button. When the indicator starts flashing quickly, release the button.

How to sync Airpods with each other?

  • Put the headphones in the case (status indicator should be orange).
  • Connect the device to the network, wait 40 minutes.
  • Open the lid, press and hold the setting button for a few seconds (located on the back of the case).
  • We press the mechanical buttons on the headphones and do not release them until the indicator starts flashing red.
  • Press the keys again: first, the indicator will turn white. this means that the headphones are turned on.
  • It is important that you hold down the buttons during the entire process.

Disconnect the two earphones: hold down both touchpads until the red indicators light up. Hold for 30-50 seconds: first, the white indicator will turn on, then, after 10-20 seconds, it will light up red-white. The indicator will blink 2 times. Keep holding until they flicker a couple of times and go out for a few seconds.

Popular headphones

There is a standard instruction on how to “make friends” between two ears. Headphone pairing is as follows:

  • We turn on one of the “ears”: a characteristic flashing will tell you that the device is online.
  • Turn on the second earpiece.
  • The last step is to quickly press the power button twice. If the headphones are connected to each other, after this procedure, the light signal will light up and disappear.

Step by step instructions will allow you to easily synchronize your AirDots headphones with each other:

  • Put the device in the charging case, make sure that each ear is in its socket. Case must be loaded.
  • Click “Forget device” in the menu of the smartphone or other Xiaomi device paired with the headphones.
  • Remove the headphones from the case and turn them off (press and hold the power button for 5 seconds).
  • Reset the original connection of one ear to the other: again press and hold the control buttons for 20 seconds (the operation is performed on each ear separately or simultaneously).
  • Turn on the headphones by holding the button for 5 seconds.

After the manipulations, the white indicator on the leading ear will light up and flash. Xiaomi headphones are paired with each other.

The wireless headphones are paired with each other via Bluetooth. In this case, the left and right ears at the first connection send signals to one another. This helps them determine the time it takes to exchange data. Analysis can be difficult if interfacing is interfered with by extraneous signals or noise. When the gadget makes the necessary calculations, it will divide the incoming signal between the left and right channels in half.

Every pair of wireless devices has a master. Usually the right earpiece plays the role of the receiving signal. Because of this, the master ear discharges a little faster, because in addition to the main function, it instantly transmits information to the slave, most often the left, earpiece. In order for music or other sounds to sound in sync, the main device plays the signal with a slight delay.

How to fix the out-of-sync problem?

In addition to the method described above, there are several other operations that will help you synchronize the headphones:

  • Cancel pairing. One of the common mistakes is trying to connect a device without first synchronizing. To solve the problem, you need the gadget to “forget” pairing. Go to the Bluetooth device manager, find the headphones in the list of paired headphones and cancel the connection using the “Forget device” button.
  • Reset settings manually. There are no special buttons on the case? You will need to remove both earbuds from there and press the power button. Pressing should last about a minute. The LED signal will first turn on, then start flashing and turn off.
  • Reset settings manually in the case. If the previous method did not work, repeat these steps, but do not remove the headphones from the case.
  • Reset settings using the case. If the charger has a special button, then the gadget must be placed inside the case. By analogy with the previous method, then you need to press the power button for at least 60 seconds.

How to sync Airpods with each other?

AirPods sync with each other regardless of whether they were bought as a pair or you first bought one and then the other earbud. Follow these steps:

  • Put the headphones in the case (status indicator should be orange).
  • Connect the device to the network, wait 40 minutes.
  • Open the lid, press and hold the setting button (located on the back of the case) for a few seconds. The indicator will flash white.
  • Bring your iPhone to the case, press “Connect” and select “Done”.

This procedure will help you if you don’t know how to sync different Airpods.

How to Fix Redmi Airdots Pairing Problem | Pair Both Airdots | Connection Problem Troubleshoot

When setting up pairing using the methods described above does not work, try resetting the settings. After that, you can enjoy the delights of a wireless headset.

If, after the reset, the phone sees the left and right earbuds separately, we recommend putting them in the case, then take out only the right earpiece from the case and connect it to the phone, and then take out the left earphone and wait until the earphones are synchronized with each other.

How to connect Bluetooth headphones to your phone

  • Pinch and hold both earbuds until you see a double purple-red flash. This is a signal that you have reset the settings.
  • Put them in the charging box for a while, take them out and wait for the devices to “find” each other.
  • Go to your smartphone’s Bluetooth settings.

Press and hold the buttons on both earbuds for 15 seconds. After the indicator flashes red and white alternately three times (and then flashes again), release the buttons and return the earbuds to the charging case. Remove Redmi AirDots from the list of paired devices on your smartphone if they are there.

If Redmi AirDots do not connect to each other, the headphones should be synchronized by resetting the wireless headset. To reset Xiaomi AirDots, perform the following steps: Turn off the headphones. Press and hold the touchpads until the indicators turn red.

This is done as follows: the headphones are turned off, then the panels on both are clamped until they turn red. The panels are re-clamped for half a minute. As a result of these actions, a white indicator should flash, and after another 10 seconds, red-white. Further holding and will cause the desired full reset.

Activate pairing mode on your Bluetooth headphones. Press and hold the power button or the ID SET button. Release the button when the indicator starts flashing quickly. Bluetooth headphones enter pairing mode.

How to sync Xiaomi AirDots or EarBuds

Xiaomi AirDots wireless headphones are gaining popularity every day, just like smartphones used to be. First, potential owners take a closer look at them, read reviews and user reviews, and then buy them for themselves, and now they can’t tear themselves away from listening and are satisfied with their use every day.

But do not think that Xiaomi AirDots headphones are a simple technological device, because all they do is reproduce sound.

Each of the wireless AirDots is a miniature computer whose task is to:

  • Control over the operation of your own systems
  • Finding and communicating with a Bluetooth audio source
  • Synchronization between left and right headphones
  • Encoding and decoding sound using special codecs and transmitting or receiving this signal from source
  • Management of the built-in battery and its charge

And a few more utility functions that are not listed above. As you can see, AirDots is not as simple as it seems at first glance.

We all know that the more complex the device, the more likely it is to break or that errors will occur during its operation.

Well, if the errors are of a software nature, they can be corrected, for example, synchronization errors, when one of the headphones stops seeing the other, or when yesterday they worked perfectly together with the phone, but today they refuse to connect to it.

It is worse with hardware errors, the user cannot cope with them in any way, because one of the elements needs to be replaced, and at the current cost of a complex repair of equipment, it is cheaper to buy new AirDots than to repair an existing one.

Below I will look at the most common Xiaomi AirDots synchronization problems and possible solutions, I hope it will be useful to you.

Xiaomi headphones not syncing with phone

I will consider this case with the premise that you have already paired the headphones with a smartphone and they worked fine, and only then they stopped synchronizing with it.

In order for the phone to forget about the headphones and you carry out a new pairing procedure, you need to enter the Bluetooth settings item on your smartphone.

In the list of connected devices, find the name of your Xiaomi wireless headphones and click on the “Arrow” icon next to it. You will be taken to the internal menu, where you need to click on the “Cancel pairing” button. This command will delete the record of AirDots or EarBuds in the smartphone’s memory, followed by the need to re-sync them with the phone.

How to sync TWS AirDots with Xiaomi phone

Place both earbuds in the charging case for about 10 seconds, then remove them from it.

  • AirDots are removed from the case in the on state and immediately start searching for a device to which they can connect, but with the one with which they were previously paired. But since in the previous paragraph, we deleted the pairing on the smartphone, we need to enter the headphones into the new pairing mode so that they synchronize with the phone. To do this, press and hold the touch panel on the right earpiece for about 7 seconds, you should see the red blinking of the diode, after which it will stop;
  • Now, when the headphones are turned off, they must be turned on and immediately put into pairing mode for synchronization, to do this, press and hold the button on the panel of the right earpiece for about 30 seconds, as a result, the diode should flash red and white alternately;
  • When the flashing starts, put both earbuds back into the case for 10 seconds, then remove them and put them in front of you;
  • Take your smartphone, go to the Bluetooth menu. scroll to the bottom, where the “Available devices” section will be located. In it you should see the name of your AirDots. click on it and follow the instructions on the screen.
See also  Notifications arrive late Xiaomi

In some cases, you will see a separate name for the left and right earbuds, if this happens, choose the right one and sync your Xiaomi phone with it, because. he is the leader of the pair. After the pairing is completed, the sound should appear in both headphones, the synchronization is completed successfully.

How to sync Xiaomi headphones with each other

In rare cases, it happens that the headphones, which yesterday played normally in pairs and reproduced stereo sound, today work separately and music sounds from only one of them.

This happened because the synchronization between the right and left earphones was broken, our task is to return it.

To restore synchronization between AirDots headphones, we will have to reset their internal Bluetooth settings, for this we will perform the following procedure:

How to sync Xiaomi AirDots headphones with each other

Wireless Bluetooth headphones are booming these days. There are many models of different brands on the market. Specifications and for them, of course, are different. It’s safe to say that Xiaomi AirDots are one of the most popular models today due to their features, sound quality and more than affordable price tag.

However, the most common problem that Air Dots owners face is headphone out of sync. In other words, there are situations when Redmi AirDots (or any other similar Xiaomi model) do not connect to each other, and only one of the “plugs” remains working. Of course, in this regard, users are interested in how to solve the problem. There is a solution. The user will need to re-pair between the right and left earbuds.

How to sync Xiaomi AirDots headphones

Here it does not hurt to share a step-by-step instruction on how to sync your headphones:

Insert AirDrops into the charging case, each headphone in its own socket. Make sure the case (aka charger) is charged.

Delete headphone connection information from the Bluetooth menu of your smartphone.

Remove two earbuds from the case, turn them off. To do this, hold down the control button on each of the “earbuds” for 5 seconds.

Now you need to perform another “Reset” (The first was to remove the device from the list of Bluetooth devices connected to the phone). At this stage, you need to reset the connection between the two Air Dots headphones. To do this, press and hold the control buttons on each of the dots for 20 seconds. The status indicator should flash twice, first after 10 seconds and then after 20 seconds. Do not release the buttons until you see the LED blink a second time.

Turn on your headphones. To do this, hold down both control buttons for about 5 seconds. You can switch on in another way: just put the “ears” in the case, and then remove them from there. When you take Xiaomi AirDots out of the case, they automatically turn on.

After such a restart, you will see the status indicator on the right earpiece flashing white. At the same time, the indicator on the left earpiece does not light up and remains unlit. This means that there is a connection between the Air Dots and the right earbud can be paired with the phone.

The last step is to pair the lead (right) AirDots with your mobile device, then you can enjoy music, audiobooks or podcasts, and receive incoming calls through the headset.

Why the headphones do not pair with each other when connected to the phone

Sometimes AirDots are synced individually, meaning they don’t pair with each other, but work with a smartphone. The reason is that the left earbud “loses” the right one, so the pair stops working together. What to do?

  • Reset Bluetooth settings for Xiaomi AirDots. Start by turning off each earbud. On each, hold down the buttons (touch or physical) until the indicators turn red.
  • Press the buttons again, now for 30-50 seconds. First, the headphones will turn on, the white light will turn on, then after 10-20 seconds you will see that the indicator glows either red or white (2 times). Continue to hold the buttons, the indicator will blink a few more times and go out for a few seconds. After that, it will blink twice more and the headphones will be reset.
  • Take the earbuds out of the case. The left one will start looking for the right one, synchronize with it, and then the dots can be connected to the phone.

Another reason for “out of sync” is the wrong order in which the headphones are connected to the smartphone. In this case, instead of the right “ear”, the left one is connected to the device first, and starts working in mono mode. The right one cannot be connected. To connect both AirDots, you will have to do a factory reset and a new connection, as described in the step-by-step instructions above (see “How to sync Xiaomi AirDots headphones”).

If you are lucky, all headphones and sound source support the Multipoint function, then you can try to connect 2 pairs of wireless headphones to one source at once, in which case you do not need to worry about anything else. You will not be able to connect 2 pairs of headphones to your phone or TV.

Connecting two headphones to a smartphone:

  • remove both earbuds from the charging case and wait 2 seconds until they turn on.
  • after turning on, the left earphone is automatically connected to the right one, the indicator of which starts flashing white.

To work separately, you just need to put one earpiece into the case. The connection will be to the earpiece outside the case. Or in the opposite case, when connecting from the case, on the contrary, remove the unnecessary earpiece to connect to the remaining one. Also, in some models, it is possible to simply turn off the earpiece by pressing the button.

Just turn on the headphones by holding the buttons for 5 seconds and they automatically connect to each other. After that, on one earpiece, the indicator actively flashes red / blue. This means that they can be connected. I found information that the main earpiece is assigned by double pressing the button.

What to do if the headphones work separately

If the Airdots still do not sync and connect to the phone as independent devices, you need to roll back to the factory settings. This is the simplest procedure.

  • Removing the inserts from the container.
  • Press the button (touch or mechanical).
  • Hold it for 30-50 seconds. The indicators will turn red and a double beep will sound.
  • We put them back in the case and take them out after a few seconds. If the white indicator flashes only on one, then the reset helped and the synchronization was successful.
  • We connect AirDots to the smartphone. The phone will detect the gadget as one device and the melody will come from two channels.

Why the headphones do not pair with each other when connected to the phone

Sometimes AirDots are synced individually, meaning they don’t pair with each other, but work with a smartphone. The reason is that the left earbud “loses” the right one, so the pair stops working together. What to do?

  • Reset Bluetooth settings for Xiaomi AirDots. Start by turning off each earbud. On each, hold down the buttons (touch or physical) until the indicators turn red.
  • Press the buttons again, now for 30-50 seconds. First, the headphones will turn on, the white light will turn on, then after 10-20 seconds you will see that the indicator glows either red or white (2 times). Continue to hold the buttons, the indicator will blink a few more times and go out for a few seconds. After that, it will blink twice more and the headphones will be reset.
  • Take the earbuds out of the case. The left one will start looking for the right one, synchronize with it, and then the dots can be connected to the phone.

Another reason for “out of sync” is the wrong order in which the headphones are connected to the smartphone. In this case, instead of the right “ear”, the left one is connected to the device first, and starts working in mono mode. The right one cannot be connected. To connect both AirDots, you will have to do a factory reset and a new connection, as described in the step-by-step instructions above (see “How to sync Xiaomi AirDots headphones”).

Headphones Xiaomi AirDots synchronization

The instruction is suitable for owners of all models of wireless headphones from Xiaomi, including Redmi and Mi. Follow these steps to create a strong bond:

  • Make sure the headset is charged and remove one earbud from the case.
  • Turn it off by pressing the touch button. After turning off, repeat the action by holding the button for at least 30 seconds until the red indicator lights up.
  • Remove the second earbud and follow the same procedure.
  • Both earbuds should glow red, then place them in the case for 5-10 seconds.
  • Remove the devices from the box and wait for the left one to automatically connect to the right one. A beep should sound.
See also  How to view steps on Xiaomi

How to connect both Xiaomi AirDots headphones to your phone

When connecting headphones, users often encounter the fact that music plays in one headphone, but not in the second. Although both earbuds appear in the list of connected devices in the Bluetooth menu.

Both AirDots connected

Perhaps this is some kind of factory defect in the entire AirDots line. Or a flaw in the model with a synchronization issue. This is also due to the fact that the headphones can be separated. You can connect only one of them to the phone, while the second one can be connected to the laptop. Or lend it to another user to listen to music on his smartphone.

Connecting headphones to a mobile phone

Even if you try to connect a second Xiaomi AirDots earphone in parallel, it will be connected and the second one is disconnected. And so it will go on ad infinitum. Let’s take a look at how to sync them correctly.

When unpacking, you need to remove the case with the inserts from the package:

  • You need to immediately make sure that the battery of the case and headphones has enough charge to connect to each other;
  • Remove both devices from the case and wait a few seconds. At the beginning, the indicators on their body will glow red; Remove both earbuds from the connection case
  • When the white indicator on the right Xiaomi AirDots earphone turns on, it means that one has connected to the other; Wait for the white indicator on the right headphone
  • Turn on Bluetooth on your phone. This can be done in the settings. Or through the shortcut menu; Turn on Bluetooth on your phone
  • Start searching for a new device if the AirDots model does not appear in the list;
  • Select a device from the list and confirm the connection. Click on the model name in the connected list on your phone

This instruction will be useful for those who have not yet connected AirDots to the phone before. If you have already done this, but without success, read the next section of the article.

How to synchronize earbuds with each other

Often, after connecting Airdots, sound comes from only one earpiece. This may be due to the fact that the Xiaomi device did not have time to synchronize with each other. As a result, only one of them was connected via Bluetooth. In such a situation, you need to reconnect them by resetting the settings. You also need to remove the model name from the list of connected devices via Bluetooth. To do this, return to the settings window and find AirDots in the list.

Then click on the arrow next to the model name. In the next window, select “Delete”.

Click on the cross next to the model

In some phones, there is a cross next to each connected device, clicking on which removes the device from the list of connected ones. To reset the settings on the headphones, you need to take both in your hands and hold the button on them for 45 seconds. During this time, the indicators on the buttons should turn red. After that, they should flash white approximately 10 times.

Hold the button for 45 seconds to reset the settings

When you reset the settings, repeat the instructions for connecting them from the first section of the article. In this way, you will be able to connect both Xiaomi AirDots headphones to your smartphone or laptop with Bluetooth. The desynchronization of the earbuds with each other may occur due to the fact that they have lain on a shelf or in a drawer outside the charging case for a long time. This happens even with headphones that were previously paired with the phone and both worked synchronously. Therefore, it is important not to leave them out of the case.

The instruction is suitable for owners of all models of wireless headphones from Xiaomi, including Redmi and Mi. Follow these steps to create a strong bond:

  • Make sure the headset is charged and remove one earbud from the case.
  • Turn it off by pressing the touch button. After turning off, repeat the action by holding the button for at least 30 seconds until the red indicator lights up.
  • Remove the second earbud and follow the same procedure.
  • Both earbuds should glow red, then place them in the case for 5-10 seconds.
  • Remove the devices from the box and wait for the left one to automatically connect to the right one. A beep should sound.

What to do if the headphones work separately

If the Airdots still do not sync and connect to the phone as independent devices, you need to roll back to the factory settings. This is the simplest procedure.

  • Removing the inserts from the container.
  • Press the button (touch or mechanical).
  • Hold it for 30-50 seconds. The indicators will turn red and a double beep will sound.
  • We put them back in the case and take them out after a few seconds. If the white indicator flashes only on one, then the reset helped and the synchronization was successful.
  • We connect AirDots to the smartphone. The phone will detect the gadget as one device and the melody will come from two channels.

We connect as a separate gadget

After the reset, turn off the headphones and turn on only one. Pair it with your phone. When sound playback starts, we activate the second one: it should automatically connect to an already working.

How To Pair And Troubleshoot The Xiaomi Redmi Mi AirDots

Now you know how to properly sync Xiaomi gadgets and what to do if this does not happen. We hope this article helped you get your wireless headset working! Write in the Комментарии и мнения владельцев if you managed to do everything according to the instructions.

How to sync Xiaomi via Mi cloud

Free on Xiaomi servers, each registered user has 5 GB available, which is enough to transfer everything except photos and videos. This is not a problem, because photos can be synchronized for free through the Google Photos service.

Open the general settings, find the “Mi account” item. Log in and log in with your account. In the “Services” section, select “Xiaomi Cloud”. We are interested in the “Data synchronization” section, select the information that you want to transfer to the cloud. Then click on the blue “Sync” button. The process of sending information to Xiaomi servers will begin, wait for it to finish. After the process is completed, do the same operation on the new phone, all the data will be in its memory in a few minutes.

Synchronization of Xiaomi (Redmi) phones with each other and with Mi cloud

Modern Xiaomi (Redmi) smartphones store a lot of different types of data, if in ancient times it was possible to copy the necessary information to a computer from one phone and upload it to another, today this process has become much more difficult. It is necessary to know where and in what format all the necessary information is stored, and for an unprepared user this can become an impossible task.

The need to synchronize data from one phone to another may arise at the time of purchase of a new device. There are other reasons, but then I do not recommend using synchronization, because in the process a lot of personal data will be transferred, which it is not advisable to store with an outsider.

How to sync Xiaomi phones with each other

There is a quick way to transfer all the necessary data from one smartphone to another, provided that they are in your hands at the same time.

The company’s engineers have developed a special tool called “Mi Mover”. It allows you to set up what needs to be transferred in a couple of clicks, connect two phones wirelessly and send files from one to another. You just have to wait a bit and the process of moving to a new device will be completed.

In the settings, enter the “About phone” menu. In the list, find the line “Mi Mover”. In the program window, you need to select a role for each phone, the one from which you are copying data should be the sender, and the one to which, the recipient. I recommend starting with the recipient, click on the button to generate a QR code required to connect the first device. On the sender’s phone, launch the “Scanner” application, read the QR code and act according to the prompts on the screen, you need to select the files to be transferred and click on the “Send” button. Then wait for the synchronization to finish and use the new smartphone as before.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE