How to switch your TV to digital TV

How to watch digital TV without a set-top box and without paying

Gradual abolition of analog television is not a Masonic conspiracy to force the population to buy new equipment. The digital is indeed many times better than the analog signal, and the resolution of modern televisions does not compare with the capabilities of analog opponents, which, incidentally, can no longer be found in stores.

The only problem is that many consumers think that you can watch digital television only with a set-top box (receiver, tuner). But that’s not the case. The question of whether you can watch digital TV without a set-top box has several answers, and we’ll look at each of them.

What to do and how much it costs?

If you have a relatively new and modern TV that supports the DVB-T2 format, then before you turn off analog TV you must buy an ordinary decimeter antenna for it. if, of course, you have not yet acquired it. These kinds of antennas are available in convenience stores and electronics stores, cost a few hundred, and are plugged into the antenna socket on your TV.

If you have a modern TV, but it does not support DVB-T2 format, you have to buy not only an antenna, but also a special receiver. They are also sold at radio stores and home appliance chains, cost about 1000-1500. Look for “DVB-T2 receivers” in catalogs and on shelves.

If you have a very old kinescope TV, which simply does not have a jack for the receiver, you will have to buy a new model. There are practically no limits on the price, you can choose what you like and can afford. Make sure your TV set supports DVB-T2 format you need.

Common Problems and Solutions

No channels are received at all, “no signal

  • Equipment for breakage (TV, antenna, and connecting cable). If you find a problem, it is worth contacting a professional;
  • Antenna adjustment. DMV antenna is extremely sensitive to the vector of the incoming signal. In most cases it helps to change the orientation of the antenna;
  • Distance to the repeater and signal strength. This information is presented by RTRS service. Your receiver is most likely in the “dead zone”, not covered by TV broadcasts. Unfortunately, until new towers are installed, reception in the area is impossible. You will have to resort to satellite broadcasting available anywhere that is open to the south;
  • Being in a radio silence zone. The nearest natural object (hill, mountain, etc.) might obstruct the signal.) or by a man-made obstacle (solid walls and ceilings). It is possible to avoid this by changing the position of the antenna (e.g. by putting it on the roof) or by a man-made obstacle (e.g. a roof antenna) which makes it possible to avoid the radio shadow (e.g. a roof antenna). The second option is to connect to another repeater, located within a radius of 30-35 km.

Only part of the channels are catching

  • You have to use a satellite to tune the broadcast from a nearby tower. You need to tune each multiplex manually on a separate frequency;
  • tuning the tuner in the system itself. Some channels might not be preserved. Repeated automatic or manual tuning of the TV will help correct the situation.

Channels were there, but they’re gone

If previously the signal was received confidently, but then the channels disappeared, the reason for this may be:

  • New obstacles in the path of the antenna from the repeater. You need to study the surrounding area with the help of the reception map;
  • Technical problems with the repeater. It is customary to cover such events with alerts, which can be found in the regional media, a local forum or a pubic.
  • Antenna failure. If using a collective, you need to contact your service company. If you use an individual, it is worth checking the position of the antenna cable for breaks and the position of the antenna itself.

Weak signal

Causes are similar to the case of complete absence of signal:

  • Long distance between receiver and repeater. The only solution is to buy a new active antenna capable of receiving weak signals;
  • radio silence zone. You need to change the position of the antenna.
See also  LG TV does not show the screen

How to add local analog channels

In most regions of Russia, in parallel with the broadcast of two federal multiplexes, broadcasting of local analog channels is supported. To increase the number of broadcast programs, you need to add them to the list. You can do this by following a simple algorithm.

  • Turn on the TV.
  • Place the antenna exactly opposite the repeater.
  • Using the remote control open the TV settings menu and search for analog channels.

Specific scenario depends on the brand and model of TV receiver. On some devices, such as Samsung, you must additionally specify which scan should be used. If you ignore this item, the system, by default, will search everything that the antenna transmits. If you want to install analog channels, you should select the option “Digital and analog”.

How to watch digital TV without a set-top box

In the period of high technology people have invented some ways that help you to watch digital channels without a special set-top box. As a rule, the availability of a special receiver and module play a major role. It turns out that this is not always the case. You can watch in different ways, which are listed below. There are only four such options:

Each has its own advantages and disadvantages. For example, if we take terrestrial TV, only about 30 channels are available on it, while on smart TV without any limitations. To understand the advantages and disadvantages. it is one thing, but how to properly connect the TV to be able to watch TV?

If your TV supports DVB-T2

The device may have module support, which plays a key role. Such TVs, as a rule, show only terrestrial TV, which has:

These characteristics are enough for many users, so they choose this connection method. To watch programs with over-the-air TV, you need:

  • Buy a special DMV. antenna. This is the connection. It is enough to install this antenna yourself or with the help of specialists, and then direct it to the nearest repeater;
  • After that you need to make some simple settings. First the TV. receiver itself goes into a configurable mode using the “Menu” button;
  • Then the user chooses either manual configuration or automatic.

This method is the easiest way to connect digital TV. Since the TV is equipped with a special receiver, this method allows you to buy only an antenna and enjoy watching. Of course, the user can’t access a large number of channels, but if this is not enough, then you can perform other procedures, which are described below.

Cable TV

The main difference between terrestrial and cable TV is the transmission method. In cable TV, the entire signal goes exactly to the cable that is connected to the TV. This method is convenient because you do not need to connect the antenna and hassle with its settings. Also to the advantages include:

This method can be set up in the following way:

  • First you need to buy a special TV-receiver, which will serve as an intermediary signal. In order to buy the right model, you need to clarify with the provider, which is the best;
  • Make sure that the room or the house where you want to connect TV has a cable connection from a special switchboard.Pay attention! The TV receiver and the switchboard are important conditions for connection.
  • After checking all the components, you should contact the provider and conclude a contract with him that the user will receive the signal from the distributed shield;
  • Signing a contract is only the first step towards connection. Next, the user needs to conduct a special cable to the apartment from the switchboard itself, and then request a card from the operator, which contributes to the connection;
  • Next comes the setting up of the TV set itself. For a quality connection, it is worth clarifying all the features, and then conduct the signal. The settings are made both automatically and manually.
switch, your, digital

TV cable is convenient because you do not need to buy additional equipment. The main thing is to have a distributed switchboard and a TV-receiver, as well as a power of attorney with the provider.

switch, your, digital

In the modern 21st century, in the age of technology IPTV is the best option, because the method allows you to watch different channels over the Internet. With it you get good quality for a relatively low cost.

This is not online video, but viewing channels through a special protocol, which is attached and concluded with the provider.

See also  How to make a calendar on your computer

To ensure you can watch via the Internet, you only need an access point and a protocol to be signed with your provider. The connection algorithm is as follows:

  • A contract is made with the provider so that the user can seamlessly watch channels over the Internet;
  • After obtaining permission, you need to install the application, which is selected for each television independently. As a rule, it is available in the official store on the device itself;
  • Then come the settings, which you need to find in the application. There are absolutely different applications, so the settings are different for each. In order not to get confused in them, you need to view articles on the Internet, as well as various instructions;
  • If the connection is made from a computer, you must use the receiver to connect it to the TV.

In this way you can watch via the Internet. This method has advantages such as:

Smart TV

Smart TV is not just called that. All this due to the fact that with it you can not only watch channels, but also go online. This is a kind of TV receiver, which works through two devices: a cable and the Internet.

Connection with a special LAN. cable is considered very convenient, because after connecting it, the TV detects the new object independently and perceives it without any additional settings.

Using Wi-Fi you can also connect a smart TV. This method is used to the fact that you do not need to buy and lay additional wires, which can later only interfere with the person.

To connect a smart TV using one of the methods, you need:

  • If you use a cable, you need to connect it to the TV, and its other end to the router or modem. That is, we connect the TV to the modem so that the Internet appears on it. It is necessary to wait for the pop-up window, which will confirm this action;
  • If a person uses Wi-Fi as a method of connection, it is also necessary to connect it to the adapter;
  • Through the settings of the device, the network is searched. If the person has found his Internet, which is installed in the apartment, then he clicks on it;
  • After connecting, a special password is entered, which blocks access;
  • Then the choice is set up.

What to do if it did not work

In a situation where you can’t set up digital TV on your TV without a set-top box, with our expert’s answers to the most common questions. This will most likely solve the problem.

An expert in digital technology and mobile operator activities. I am constantly monitoring changes in the industry in Russia and abroad.

Check if your antenna and connection cables are in good working order. Also make sure the plugs are firmly inserted into the TV. In addition, do not forget to clarify whether the last payment for TV services has passed.

The fact is that in Russia you can watch only 20 channels for free. To get access to more programs, you need to subscribe to the service you use, or subscribe to a cable/air operator.

You can call our nationwide customer service line 8-800-550-50-30 or call your TV operator directly. This way you can get recommendations or call a technician at home.

How to tune TV channels

Connecting your TV to your antenna is only half the job. There are no problems with connecting devices if your TV supports digital format. An important part of the digital connection is the channel setup. Absolutely all TVs are different, so the tuning process will vary depending on the software. Of course, depending on the firmware, the interface also changes. All this proves that there is no uniform instruction for tuning TV channels.

But users don’t need a universal manual. Study the technical documentation, which step by step describes the process of finding and tuning channels.

switch, your, digital

When you turn on the TV set or a digital set-top box for the first time, the equipment offers to configure channels automatically. There is an alternative way. manual search.

Auto channel search

You need to go to the settings, and then run “Auto Search”. Wait a few minutes while the TV catches the digital channels. The device automatically scans available frequencies, which, in fact, are used for broadcasting free channels. Users need to uncheck the “Analog TV” option in advance. But on some TVs there is no such item at all.

Some regional channels are still broadcasting on analogue frequencies. This aspect should also be taken into account.

Quite often there are cases when the automatic search gives absolutely no result. But there is a perfectly logical explanation. It is important to note that analog and digital television are very different standards. In digital TV it is possible to broadcast a whole complex of channels on one frequency. Therefore it is possible that in about 30% of the search time the channels will not be found, but at 40% the situation will change noticeably.

See also  How to set up forkplayer on your LG TV

As of today there are two multiplexes launched in Russia. It is possible that as early as next year there will be a third launch. Every multiplex is about 10 channels. The list of available TV channels can be noticeably expanded, using the services of a digital TV provider. But you will be able to access them only after paying a subscription fee. Immediately after completion of automatic search, be sure to save the found channels. Some TVs do this automatically. In the settings you can also change the order of the TV channels.

Manual tuning and channel search

In some situations the automatic search does not work, so you have to search for channels manually. To search manually, you need the multiplex frequencies in your area. Finding the necessary information should not be difficult. Open the rtrs website.Click on the “TV coverage map” link and then go to the “Coverage map” section. Here you can find all the information you need.

  • On the map, select your location.
  • Click the icon with the TV tower.
  • If there is no repeater in your area, click on the nearest one.
  • A dialog box opens with all multiplex frequencies.
  • Type in the numbers in the appropriate windows while searching for channels.

Of course, the manual search will take much more free time.

When you can’t do without a set-top box

Of course, owners of frankly outdated receivers with kinescope receiver can’t do without a set-top box. these devices simply do not know what a digital signal, and the external receiver is precisely engaged in the conversion of digital signals into analog. Naturally, with a significant loss of quality, both picture and sound.

But that doesn’t mean that if you have a flat screen TV, it will automatically receive a digital signal. Many of the first generation models also had no built-in tuner, even though they were capable of receiving digitals. They also needed a set-top box, and they could only broadcast analog TV without extra equipment, unless you count the terrestrial antenna.

Let’s figure out how to determine if a particular TV receiver can watch digital TV without using a set-top box.

To do this, simply study the technical specifications of the TV you like. If you choose TV online, then almost all online stores contain a detailed description of the characteristics of each model. If you buy it in a regular supermarket, just look in the owner’s manual at the technical specifications page.

To receive digital broadcasts without the need for external equipment the TV set must support the following standards:

  • DVB-C/DVB-C2 is a format for receiving a signal through cable, cable television;
  • DVB-T2 is an over-the-air broadcasting standard supported in Europe. Not to be confused with DVB-T, the first generation standard, no one broadcasts in this format today;
  • DVB-S/DVB-S2: A standard for broadcasting using a satellite dish.

WARNING. If you have an older model of TV, not supporting any of these standards, you can watch digital television on it only with a receiver. To be fair, let’s note that their cost today is quite low. the simplest devices cost about 10.

Summing up

Digital terrestrial television has a higher quality than analog channels. You can easily connect and configure this function on any TV, and you do not need to have any special knowledge. Let’s summarize our instructions into a common one for most televisions:

  • Connecting the antenna.
  • In the settings menu find the auto channel search.
  • Then set the type of connection “Cable” and if necessary set the parameters in the data area (baud rate, frequency and modulation).
  • You also need to select the country, usually Germany or Finland, as required.
  • Start searching for channels with the start button in the dialog box.
  • Wait until the search is completed and move on to the long-awaited viewing!

We hope you succeeded, dear friends! Share your digital terrestrial TV setup stories in the Комментарии и мнения владельцев.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE