How to Share Wi-Fi on Honor 8

How to quickly and easily share Wi-Fi from phone to laptop?

Hello! Dmitry Kostin is with you, and today I will tell you how to distribute Wi-Fi from phone to laptop using the simplest steps. Unfortunately, very often you have to resort to such actions, because the provider can be very unpredictable (either an accident on the line, or local glitches), and the Internet is needed more than ever. Thank God that a native smartphone can share its internet.

Since I am not the owner and fan of “Apple” products, I will only talk about working with a smartphone based on Android. You will need to follow a few simple steps.

Phone setup

We go to Settings (parameters) on your smartphone and look for the “Networks” item. after which we look for the item “Shared modem” or simply “Modem” there. Naturally, we select it.

On other phones, this feature may be slightly hidden. Try looking for the item “Wireless networks” in the network settings (and most likely you will need to click the “” button) and already there you will find the item “WI-FI router” or “Modem”. Anyway, this function is somewhere here.

Next, select the item “WI-FI access point”. “Create an access point” Naturally, the names may differ slightly, but the essence remains the same. I think you can’t go wrong.

Well, Bluetooth, as you already understood, is needed to connect to a device via Bluetooth. But I don’t like this method at all.

Next, you need to specify what your WI-FI network will be called. For good reason, you can leave it as it is, but if you want, change it to make it more convenient for you. After that, we come up with a password so that the neighbors do not dare to connect to us, well, in principle, you do not need anything else. Click “Save”

We saved it, but now we also need to enable it. To do this, we need to return to the “Shared Modem” menu. where we chose to create an access point, and activate it.

And of course, the most important thing is that you must have mobile Internet enabled on your smartphone, otherwise all our manipulations do not make sense. If Wi-Fi is activated on the smartphone, then it will automatically turn off, because it is powered from the 3G or 4G mobile network.

Setting up a computer or laptop

Well, now the matter remains small. We need to find a wireless Internet connection on the computer, so we need a laptop, or a computer that supports Wi-Fi.

Now in the lower right corner (in the tray) we are looking for the wireless connection icon, click on it and from the proposed list select the network itself that we created on our phone. Next, enter the security key (the password you came up with) and use the Internet.

This action helped me out more than once, thanks to our unpredictable provider. Sometimes the Internet is urgently needed, but for some reason it is not. It’s not very convenient to use this on a smartphone, so you have to manage to steal traffic from your phone in favor of surfing the Internet at your computer.

Oh, and don’t forget about traffic too. Spending time on this Internet eats up your traffic very well, so I recommend that you use this function when you really need it, and to watch videos on YouTube, such as the top 10 accidents.

Well, on this I, perhaps, will finish my article today. I hope you found it useful and you will not forget to subscribe to my blog updates. Good luck to you. Bye Bye!

How to distribute the Internet via a Wi-Fi hotspot on an Honor smartphone.

On this page you will find information on how to distribute the Internet to Honor via Wi Fi, perhaps the instruction will be relevant on other Android smartphones and tablets. You can share the Internet from your smartphone with other devices using your phone as a Wi-Fi access point, you can simultaneously distribute the Internet to several devices. Modern smartphones, including Huawei Honor, support high-speed Internet and if you have a tariff with unlimited Internet, you can easily share it with other smartphones and tablets. We will also show you how to set up a Wi-Fi access point, how to find out the password for Wi-Fi, how to change the Wi-Fi password and other possible actions that allow you to distribute the Internet from your phone to another phone or other device. In our example we are using Honor 9, the information should be suitable for other Android devices as well. Do not forget to turn on the Internet on your phone to share with other devices.

There are several ways to enable the hotspot and share Wi-Fi on the phone.
1) Drag your finger down from the top edge of the screen until you see a quick access menu to useful functions. See screenshots below. Here we need to find and click on the icon with the signature “Access point”, after which the access point is activated and the icon will change in color. Now you can turn on Wi Fi on another phone, find the access point of the smartphone from which you distribute the Internet and use the Internet on another device.
2) The second method also allows you to turn on the distribution of the Internet on the phone. As in the first method, drag your finger down from the top edge of the screen and see how the shortcut menu for useful functions comes out. At the top of the screen we see an icon in the form of a gear, which we need to click on. Further in the opened settings we find and go to the item “Wireless networks”. Look at the pictures attached below.

In the window that opens, select the “Modem mode” item and in the next window select “Wi-Fi access point” and then turn on the Wi-Fi access point and distribute the Internet from the phone. See screenshots below.

You can configure how to share Wi-Fi and set the data transfer limit. You can also view the Wi-Fi password, change the Wi-Fi password, change the encryption type, for this, go to the “Configure Wi-Fi access point” item. Now you can find out what is the password for wai wai or you can change the password for Wi-Fi. If the password is not visible, then click on the crossed-eye icon and the password will become visible. See the pictures below. When you distribute the Internet from your Honor smartphone, those who want to connect to Wi-Fi and use the Internet must enter this password.

Also, you can quickly get into the Wi-Fi settings by pressing and holding a little on the same icon when we turned on the wai wai by pulling your finger from the top edge of the screen to bring up a menu for quick access to useful phone functions. You can change the password if necessary and make other settings of the access point at your discretion.

How to share internet with Honor 20?

  • Connect Honor to computer via USB.
  • Go to the “Settings” of the smartphone and select the item “Wireless networks”.
  • Open the “Modem Mode” section and move the slider opposite the “USB-modem” inscription to the “On” position.
  • Wait a couple of minutes until the necessary drivers are automatically installed on the computer.

How to create a hotspot on Honor?

Further in the opened settings we find and go to the item “Wireless networks”. Look at the pictures attached below. In the window that opens, select the “Modem mode” item and in the next window select “Wi-Fi access point” and then turn on the Wi-Fi access point and distribute the Internet from the phone.

How to enable tethering on Huawei?

Open the Settings app, select Wireless & networks Tethering and turn on Bluetooth tethering. On the Bluetooth screen, tap next to the paired device, then turn on internet access. USB tethering mode: Use a USB cable to connect your device to your PC.

How to distribute the Internet from one phone to another?

How to transfer Internet traffic from a phone to a device

  • Connect smartphone via USB to the device.
  • Enable modem mode, for this you need to go to Settings Wireless networks Modem and access point USB modem (the option becomes active when the smartphone is connected via USB).
  • On the device, from the list of connections, select the newly created.

How to share Wi-Fi on Honor?

Call the shutter and turn on the data transfer, that is, the mobile Internet.

  • After that, you can safely open the “Settings” on your smartphone.
  • Click “”.
  • Or. the item “Wireless networks”.
  • Here select the line “Modem mode”.
  • Click on “Wi-Fi Hotspot”.
  • First you need to configure the access point.

How to distribute the Internet from Honor 8x?

Instructions for distributing the Internet via wi fi on Honor 8X phones

  • In the settings, select. Wireless networks
  • In the next window, select. Modem mode
  • Next, go to the item Wi-Fi access point.
  • My access point is called Honor 8x phone (your name may differ from mine)

How do I share Wi-Fi on my Honor phone? How to enable data transfer on Honor?

  • Open the “Settings” menu.
  • Select in the menu “Wireless networks” (or “.”, or “Advanced”) → “Mobile network” (or “Mobile networks”, or another similar name).
  • Check the box “Data transfer enabled”.

How to connect mobile internet on Honor?

How to properly set up the Internet on Honor and Huawei phones

  • Open your phone settings.
  • Select “Wireless & networks”.
  • Next “SIM-cards settings”.
  • In the line “Data transmission” put a full stop in the corresponding box.

How to make an access point in Windows 8: Video

A new connection will also appear (in my case. “Local Area Connection 3”). The name may differ, but usually only the last digit is different. 2 or 3 or 4, depending on how many connections are already on the computer. Now we can launch our network. To do this, run the command line with administrator rights and write the second command in it. That’s it, the distribution of a Wi-Fi network from a laptop in Windows 8 is ready. Now you need to provide general access, as well as provide the ability to access the Internet.

Creating a virtual network

Before moving on to the question of how to distribute the Internet via Wi-Fi from a laptop in Windows 8, you need to figure out how to create a virtual group to which all devices will connect wirelessly in the future.

So what does it take? This can be done in two ways:

  • Using built-in tools. using the command line.
  • Using third-party programs, for example, Connectify, Virtual Router Plus and so on.

We will consider the first option, since it has the best stability. In addition, programs from third-party developers differ in the simplest settings that do not need to be described, since even novice PC users can figure them out.

Sharing setup

Setting up sharing begins by launching the Network and Sharing Center. Hover the mouse cursor to the upper right corner and start the search. We register the “Network and Sharing Center” and start the service. In the window that appears, you need to go to “Change advanced sharing settings.” Here we enable network discovery and other services, as well as disable password-protected sharing.

How to Share Wi-Fi on Honor 8

Now other group members can see you online. In order to provide access to files and folders, right-click on the desired document (or folder) and hover over “Shared”, then select “Homegroup (read and write)”. After that, all group members will be able to see the open folder, copy it to their device, copy their data to it, and so on.

In order to distribute the Internet via Wi-Fi from a laptop in Windows 8, return to the Network Control Center and select the “Change adapter settings” item. Here you need to find the connection through which the laptop accesses the Internet, right-click on it and select properties. In the window that appears, go to the “Access” tab and set two checkboxes, and in the “Home group connection” line, select the connection that we created (local area network connection 3).

Click “OK” and close all windows. On this, the distribution of the Internet via Wi-Fi from a laptop in Windows 8 is configured. This method, of course, requires some knowledge from the user that was presented in this article. However, you do not need to look for any third-party programs that may slow down the system or pose a threat to system security.

Now you know how to distribute Wi-Fi from a laptop on Windows 8. If you do everything carefully and without errors, then you will not have any difficulties.

How to create a homegroup using a laptop

Configuring the distribution of Wi-Fi from a laptop in Windows 8 begins with launching the command line. Press the WindowsX key combination. In the menu that appears, find and open “Command Prompt (Admin)”.

Thus, the command prompt is launched with administrator rights. Here you just need to write a few simple commands that allow you to create a virtual wireless network to which you can connect all devices equipped with a Wi-Fi module. So, here is the set of commands you need:

  • Create a wireless virtual group. netsh wlan set hostednetwork mode = allow ssid = My_virtual_Wi-Fi key = 12345678 keyUsage = persistent. Here SSID is the name of the network, it can be anything (only in Latin letters), and Key is the group key that will be required to connect.
  • Start the created network. netsh wlan start hostednetwork.
  • Stopping the network. netsh wlan stop hostednetwork.

How to distribute the Internet via Wi-Fi from a laptop with Windows 8

Today, no PC user can do without the Internet. Every modern person is connected to a global network, but very often the question is how to distribute the Internet over a wireless network so that all available devices have access to the World Wide Web. This usually requires a router, but what if you don’t have one? How to distribute the Internet via Wi-Fi from a laptop on Windows 8? You can find out about this by reading this article.

How to Share Wi-Fi Easily with Conectify Hotspot: Video

I work as a private computer foreman. I have been professionally engaged in computer repair for over 12 years, as an amateur since the 90s.
For two years he worked as the head of a service center specializing in connecting subscribers to the Internet and computer help.

How to distribute the Internet from Huawei and Honor phones: setting up an access point

How to distribute the Internet from Huawei and Honor, and is it even possible? Yes, it is possible. But few users know the correct algorithm of actions. There are several options for distribution: built-in functionality, modem and third-party programs. They all have a different algorithm of work, with which we will acquaint you in a detailed step-by-step instruction.

Why the smartphone does not distribute the Internet via Wi-Fi?

There are several reasons for this:

If you have any questions or complaints. let us know

  • you have run out of traffic;
  • network error or virus;
  • wrong connection.

Additional Information

If you follow the instructions, there will be no problems. But there are abnormal situations and individual problems that do not allow you to perform an action.

Wi-Fi hotspot

The most popular and frequently used option for sharing traffic is to create a Wi-Fi hotspot on your phone. The algorithm how to distribute the Internet from an Honor and Huawei phone is given below.

  • Turn on mobile data transfer through shutter shift or settings.
  • Go to the item “Wireless networks”.
  • Click on the line “Modem mode”.
  • Next, we need the Access Point tool.
  • By clicking on it, the settings graph appears.
  • If you are connecting for the first time, you will have to enter several items for security settings.
  • Specify the name of the network that other users will see, as the name of the wi-fay.
  • Next, choose whether there will be a cipher. If yes, then set WPA2 PSK mode. This is the default setting for this type of connection.
  • Enter a password if required. It is better not to use classic collections like “12345678” or “00000000” in it. Also, do not use personal information, phone number or name. Come up with a reliable combination that scammers can’t hack.
  • Exit settings and use.

Through applications

  • via Bluetooth;
  • via Wi-Fi;
  • limited access (limit data).

The second window offers to set how much traffic you are ready to give for use by another device. This is convenient, because this way you can avoid overspending. There is no such monitoring function in the built-in parameters.

Share via USB to computer

This requires a cable that connects the smartphone and PC. After connecting, follow the instructions:

  • swipe the curtain from top to bottom;
  • select the connection type “File transfer”;
  • then go back to the modem control mode on the phone, and select the “USB” option there.

Now you have the opportunity to transfer traffic to your computer or laptop. Just find your phone among the available points there and connect.

What is hotspot in Huawei and Honor phone

Huawei and Honor hotspot is the ability to broadcast Internet access from your phone to other devices. The need for this arises when your friends or colleagues do not have the opportunity to connect to Wi-Fi and access the Internet. Then you can share your mobile network with them. Fee depends on your mobile operator.

  • If you have unlimited Internet use within the tariff, then most likely you will have to pay extra for using the distribution tool. How much it costs you need to check with the operator, are different for everyone.
  • If traffic is limited, then such services are usually not charged.

We emphasize that it is possible to distribute the network only if your phone uses mobile traffic. The Wi-Fi action will not work.

Bluetooth modem

Modem mode on smartphones is also available via Bluetooth. You go to the wireless network settings, and set the Bluetooth parameters. At this point, the port itself should be enabled. Do not turn it off throughout the entire distribution. Next, you establish a connection from laptops or PCs through a Bluetooth modem, and give access to the network.

How to share Internet from a tablet?

The algorithm is the same as for the phone. over, the instruction is also suitable for owners of other models of phones with Android OS.

USB modem

If your computer does not support a Wi-Fi connection (the required module and headset are missing), you should use your phone as a standard USB modem. To do this, you should:

  • connect the phone to the computer using the supplied cable;
  • wait for the installation of the necessary drivers (if required) and make sure that the connection is established;
  • open the already mentioned section “modem mode” on the smartphone (you can use the instructions above);
  • activate the item mentioning USB.

After that, it remains to configure a standard local area network on a PC by going to the network diagnostics center.

Modem mode on Huawei and Honor smartphones

To activate the distribution of traffic, you just need to turn on the tethering mode on your phone. As a result, users will be able to connect to the mobile Internet any device that is within the network coverage area and supports a connection, including:

  • tablets;
  • other smartphones;
  • computers and laptops;
  • modern Smart TVs and receivers.

There are no strict restrictions. The main thing is that the selected device has the ability to connect to the Internet in standard ways. The exception is old phones that only support the network provided by the operator.

What is hotspot in Huawei phone?

The Huawei hotspot is no different from other Wi-Fi hotspots. It also allows you to connect to the network and use traffic. It was already mentioned above that any device, including tablets and even TVs, can connect to the network. And the only difference will be the fact that the phone is used as the source of the connection. At the same time, the distribution of gigabytes does not prevent users from using the other functions of the device. The only drawback will be a slight decrease in device performance. But the differences in the quality of the device are minimal, so users will not notice any deterioration.

How to distribute the Internet from a Huawei or Honor phone?

There are several ways to enable distribution:

  • via Wi-Fi;
  • via usb cable;
  • via bluetooth.

In each case, Android owners will have to take similar steps. The differences will only affect the choice of the optimal mode.

It is important to emphasize that all possible problems and their solutions are related to the actions of the operator or the terms of the tariff. If you cannot transfer part of the traffic to another phone, you need to familiarize yourself with the restrictions provided by the tariff plan (in this case, you will have to activate additional options) or take a closer look at the connection speed (in this situation, replacing the tariffication with a faster one will help).

Wi-Fi hotspot

Using a Wi-Fi hotspot is the most common way to distribute the Internet. To turn on the access point, you will need:

  • open smartphone settings;
  • go to the section with the mention of wireless networks;
  • find the subsection “modem mode”;
  • choose a Wi-Fi access point among the options provided by the developers;
  • configure by specifying the type, network name (recommended type. WPA2) and password;
  • move the slider to the “on” position;
  • save the changes made.

You should connect to the created network in the standard way of connecting to Wi-Fi, using the name and password specified earlier during setup.

How to distribute the Internet from an Honor or Huawei phone: enable tethering

How to distribute the Internet from Huawei or Honor. such a question should not worry the owners of smartphones, since the phone developers are worried that the mentioned function always remains at hand. It is much more important for users how their mobile operator relates to the distribution of traffic. Many cellular companies impose strict restrictions on such actions and significantly reduce the connection speed or completely disconnect the network. Only in the case when the tariff used allows distribution, it is worth moving on to studying various ways to use Android as a modem.

Bluetooth modem

Knowing how to distribute the Internet from an Honor phone via Wi-Fi, it is not difficult to figure out how to connect the distribution of traffic via Bluetooth. But those who need instructions should do the following:

  • turn on Bluetooth on your smartphone and laptop;
  • activate the Bluetooth modem mode in the phone settings;
  • wait until the device that will receive traffic detects Android and offers to connect;
  • wait for the connection code to appear on the phone screen;
  • enter this code in the dialog box prompting you to establish a connection.

After that, access to the Internet is opened.

If you have any questions or complaints. let us know

How to share a Wi-Fi network from a Windows 8 laptop

Private wireless networks are widespread these days. The fact is that with the help of such technologies, it becomes possible to combine various devices into groups for the exchange of information, joint games, and so on. It should be noted that every modern person has several devices equipped with Wi-Fi adapters: a smartphone, laptop, tablet, and so on. The topic of this article is how to share Wi-Fi from a Windows 8 laptop.

The fact is that usually the organization of the network occurs using an access point, the functions of which are performed by a wireless router. It is he who unites subscriber devices into groups. over, if the router is connected to the Internet, then it distributes it to all network participants. But what if such a router is not at hand? In this case, you can share Wi-Fi from a laptop with Windows 8. How to do it? Everything is extremely simple.

How to share Wi-Fi from a laptop using built-in utilities

So, how to distribute Wi-Fi from a Windows 8 laptop using the new Computer-to-Computer connection. Everything is extremely simple here. Open Network Sharing Center. This can be done by a simple right-click on the network icon in the system tray (desktop area in the lower right corner). Select the appropriate item.

Now click on “Set up a new connection”. In the menu that appears, lower the slider to the very bottom and select the item “Configuring the wireless network computer-computer”. Click “Next”. Then the system will ask us to enter the name of the connection, indicate the type of encryption, and also come up with a security key. You have to come up with the name and password yourself, but the encryption method is strongly recommended to select “WPA2-personal”. This is the safest option and provides the most protection.

Below we put a tick in the line “Save the parameters of this network”. Click “Next”. Now wait for Windows 8 to automatically create the network, then close all windows. Now you need to connect to it yourself so that other participants can discover a new connection.

Next, we need to share the created group. To do this, go back to the network control center and select the item “Change advanced sharing settings” in the left menu. This is where you enable network discovery and folder and printer sharing. At the very bottom of the menu, disable password-protected access. This will avoid some difficulties in the future. We save the settings made and close all windows.

If your laptop has an Internet connection via an Internet cable or USB modem, then you can distribute it on our network. To do this, go to the network control center. In the left menu, select the item “Change adapter parameters”. Here you need to find a shortcut to the connection with which your computer connects to the Internet. Click on it with the right mouse button and select “Properties”. Then we enter the “Access” tab.

Now in the line “Home network connection” select our created network. A little higher, set a checkmark in front of the item “Allow other network users to use the Internet connection of this computer.” Click “OK” and close all windows. All members of the group now have access to the Internet. If something failed. read this article.

How to use a laptop as an access point

First, let’s take a look at how Wi-Fi wireless technology works. This will help you understand how to implement a home network. The fact is that a wireless adapter is used to transmit data over the air. It is available in both routers and laptops, and is capable of simultaneously receiving and sending data packets. This means that the laptop’s Wi-Fi adapter can function as a full-fledged access point.

over, this can be done in several ways:

  • Using built-in Windows utilities.
  • Using third-party programs.

It should be noted that the first option is also divided into two options:

  • Setting up a computer-to-computer wireless connection.
  • Using the command line.

So let’s take a closer look at all these options.

How to create a wi fi network on Windows 8: Video. How to organize Wi-Fi distribution on a laptop in the command line: Video

How to create an Internet distribution using third-party programs

Another way to share Wi-Fi on Windows 8 is to use a dedicated app. There are a lot of such programs, but two of them are most widespread:

  • My Virtual Router Plus.
  • Connectify.

Despite all the variety and huge number of applications, they are all based on the same principle. Their settings are kept to a minimum. After installing and launching the application, you just need to specify the name of the network, come up with a key and specify the connection that will be used to access the Internet.

You should be aware that the built-in utilities of Windows 8 work much more stable, unlike programs created by third-party developers. over, sometimes such applications make settings in the parameters of the wireless adapter, which may cause some difficulties in connecting to the network. Another advantage of the built-in utilities of the operating system is that if you create a virtual access point in the command line, you can use the same Wi-Fi adapter to access the Internet and distribute it to other participants. No other way allows it.

How to organize Wi-Fi distribution on a laptop in the command line

The second way how to distribute Wi-Fi through a laptop with Windows 8 using built-in tools is to create a virtual access point in the command line. To do this, first of all, you need to open the service we need with administrator rights. This is done by simultaneously pressing two WindowsX keys. In the menu that appears, select “Command Prompt (Admin)”.

After that, it remains only to register the necessary commands. One of them is needed to create a distribution of a wireless network, the second one starts its work. But, before proceeding to create a group, you should update the drivers. It is best to go to the official website of the laptop manufacturer and download the latest drivers for your wireless equipment. Only after that you can proceed to further actions. So, here are the commands you need:

  • Create a virtual access point. netsh wlan set hostednetwork mode = allow ssid = My_virtual_Wi-Fi key = 12345678 keyUsage = persistent. Here SSID is the name of the network, it can be anything (only in Latin letters), and Key is the password for entering the group. In the future, you will need to enter it to connect.
  • Starting a virtual hotspot. netsh wlan start hostednetwork.
  • Shutting down the network. netsh wlan stop hostednetwork.

Here it is necessary to strictly observe absolutely all characters and spaces. If you make a mistake, the command will not be executed. In order to share the Internet via Wi-Fi in Windows 8., follow the steps that were described above in the section “Creating a computer-to-computer connection”. As you can see, everything is extremely simple. But that’s not all of the ways to share Wi-Fi in Windows 8.

Wi-Fi not working on Windows 8: Video

Along with this material is often read:

I didn’t do it the way you did

I don’t understand, the article is about how to distribute wi-fi WITHOUT a router. And I have no “Wireless Networks” without a router, although I managed to create an access point, nothing connects to it.

The computer has a “Wireless & networks” connection initially if the drivers are installed. Therefore, I recommend that you first go to the official website of the manufacturer of your laptop, find your model and modification of the laptop and download network drivers, in particular for Wi-Fi. After that, we do a complete reset of the network parameters. To do this, run the command line with administrator rights and execute the following commands in it:
netsh int IP reset (if you fail to register or an error pops up, then write like this “netsh int IP reset c: \ resetlog.txt”).
route –f.
netsh interface reset all.
netsh interface IP reset resetlog.txt.
netsh interface ipv4 reset resetlog.txt.
netsh interface ipv6 reset resetlog.txt.
netsh winsock reset.
netsh firewall reset.
After each command, press “Enter”. Reboot the PC. Now we remove the old drivers (if any) and install the new drivers. Next, we create the distribution again. Here is an instruction on how to do it. http://bezprovodoff.com/wi-fi/nastrojka-wi-fi/razdacha-wi-fi.html. There are three methods described here, but only two will work for you. the command line and the Virtual Router Plus program. All settings in the article are described in detail with pictures, I think you can figure it out.

Hooray))) Thank you very much, everything worked out, everything works))))

when I enter the command “netsh wlan start hostednetwork“, it issues “failed to start hostednetwork. The group or resource is not in the correct state to perform the requested operation. ”
What to do about it?

First of all, I recommend resetting the network parameters and the routing table. To do this, do the following. Update the network adapter driver for your operating system version from the manufacturer’s website. over, it is better not to update, but to remove the old drivers and install new ones. But, I believe that you have Windows 8 or 10 installed the drivers by itself and you did not download them and did not manually install anything. If so, just download the necessary drivers from the official website of your laptop manufacturer and install them manually. If you have seven, and you manually installed the drivers after installing the OS, then again, just find other drivers, download them, delete those that are installed, and then install new drivers. If this does not help, then move on. Perform a network adapter reset, routes, DNS flush, and Winsock. Disconnect the network cable and Wi-Fi. In Windows 8, press WinX, select “Command Prompt (Admin)”. In Windows 7, go to the Start menu and type CMD in the search bar. In the search results, the very first option will be the CMD program. Right click on it and select “Run as administrator”. Now, in the command line, run the following commands in sequence (after writing each command, press “Enter”): 1. route –f. 2.ipconfig / flushdns. 3.netsh int IP reset. 4.netsh int ipv4 reset. 5.netsh int tcp reset. 6. After writing each command, press “Enter”. After completing all commands, restart your computer. Another option. If all of the above does not help, then open the Network and Sharing Center. Go to the section “Change adapter settings” and find our Wi-Fi adapter here (most likely, you will have it called “Wireless network”, at the end there may be number 2. depending on the configuration of your computer). So, if this shortcut is gray, then right-click on it and select “” Enable “” (with a shield).

I did everything (the second option, through the command line) (((There is a network, all devices are connected (androids, apples) BUT, there is no Internet connection. I tried to manually register the addresses (IP and DNSL), I was poking around in the properties for a long time), but never additional. (((Help.

Hello. Most likely, you just messed something up with the sharing settings and when allowing access to the Internet. Look, we are launching the Network and Sharing Center. Here in the menu on the left there is a section “Change adapter settings”. Here you need to find the active Internet connection of the computer (this is all on the sending PC). We find exactly the connection through which the computer receives the Internet. Right-click on it and select “Properties” and here we tick the box “Allow other network users to use this computer’s Internet connection”. below there is a line “” Home network connection ””. This line may not be there, but if it is, then in it we select our virtual network (the network that we created). We save the settings and that’s it. if it still does not work, then delete the created network. Here’s how to do it. http://bezprovodoff.com/wi-fi/nastrojka-wi-fi/udalyaem-virtualnuyu-set.html. After that, we reset all network parameters. To do this, in the command line, launched with administrator rights, execute the following commands:
netsh int IP reset (if you fail to register or an error pops up, then write like this “netsh int IP reset c: \ resetlog.txt”).
route –f.
netsh interface reset all.
netsh interface IP reset resetlog.txt.
netsh interface ipv4 reset resetlog.txt.
netsh interface ipv6 reset resetlog.txt.
netsh winsock reset.
netsh firewall reset.
After each command, press “Enter”. Reboot the PC. Now download and run the Virtual Router Plus program and distribute the network using it. That’s all.

Everything worked out and wi-fi worked. And then it started: the smartphone gives out low speed of the Internet. And that’s it. What to do

Hello. First, I advise you to delete the created distribution. If you created it on the command line, then here is an instruction on how to delete the created virtual network. http://bezprovodoff.com/wi-fi/nastrojka-wi-fi/udalyaem-virtualnuyu-set.html. After that, we do a complete reset of all network parameters. To do this, you need to run a command prompt with administrator rights. It is done like this: press WindowsX and in the menu that appears, select “” Command term (administrator) “”. Now we execute the following commands:
netsh int IP reset (if you fail to register or an error pops up, then write like this “netsh int IP reset c: \ resetlog.txt”).
route –f.
netsh interface reset all.
netsh interface IP reset resetlog.txt.
netsh interface ipv4 reset resetlog.txt.
netsh interface ipv6 reset resetlog.txt.
netsh winsock reset.
netsh firewall reset.
After each command, press “Enter”. Reboot your computer. To be sure, I would also uninstall all network drivers and reinstall them, but this is not necessary. After completing all these steps, create the distribution again. Here is a more detailed instruction on how to do this. http://bezprovodoff.com/wi-fi/nastrojka-wi-fi/razdacha-wi-fi.html. Three methods are described here. But, only two will suit you. the command line and the Virtual Router Plus program.

Good afternoon! I did everything as you described in the video, but Wi-Fi still does not work. On my computer, there is no mechanism to turn it on and off under the wireless section. This means that the computer, in principle, cannot distribute Wi-Fi.?