Iphone

How to see battery on iPhone

Table of Contents

How to copy, delete, or clear numbers

As already mentioned, the functions of the standard iPhone application “Calculator” allow you to fully emulate the operation of a full-fledged analog device. This means that you can not only perform the simplest arithmetic operations such as addition, subtraction, multiplication and division, but also raise numbers to a power, take a root from them and perform many other actions. Also, the functionality has the ability to copy data, delete calculation results or clear numbers that were entered by mistake.

To copy the calculation result, you must press and hold the data on the screen. After that, you should click on the “Copy” button, and then paste the result to this or that location. This could be a personal message or a note.

Note! To delete the last digits that could have been displayed accidentally, you need to swipe left or right on the display at the top of it. In some operating systems, the digit will be deleted on its own, and in some it will be highlighted for later deletion.

The display can be cleared in the following ways: by pressing the “Clear” button with the letter “C” to delete the last entry or counting, or by pressing the “Clear all” button with the two capital letters “AC” to delete absolutely all records.

battery, iphone

Numbers cannot disappear by themselves, they must be deleted

Where is the calculator on iPad

There is no calculator on iPad. No one knows what this is related to, but some people who allegedly once worked at Apple argued that the story of adding a program to the operating system of the iPad is quite funny. When the first tablet was in development, they came up with a calculator that stretched to full screen, but it was a regular port from the iPhone.

S. Jobs summoned the head of development and asked to change the design of the future application. There was no time, so the calculator never got into the assembly of standard programs for the first iPad. Since then, the program has never seen the light of day, even on newer tablet models.

Note! There is information that says that in iOS version 13, this feature will finally be added. over, the program will work not in full screen mode, but in windowed mode. No one knows if this is true or not, but such a surprise would solve the problems of many users.

Where is the calculator in the iPhone

The Calculator application is a standard feature of the iPhone operating system, so it can be easily found in the main menu of the smartphone. It resides there along with all standard and user-installed programs. Finding it is very easy, as the icon helps in this, which very much resembles a small calculator. The application opens in the same way as the rest. by a simple short press.

How to use the calculator in iOS

The touch buttons of the application on any Apple technology can be used in exactly the same way as the analog keys in a regular calculator. When the addition, subtraction, multiplication or division button is pressed, a whitish circle appears around the key, which indicates that it was in this area of ​​the screen that the click occurred. To switch to the extended type scientific calculator, you simply need to rotate the phone screen to landscape orientation.

Important! The iPhone calculator is quite accurate, so you don’t have to worry about the counting results when working with ten- or even twenty-digit numbers. Despite this, some procedures may round the results in one direction or the other. This is done according to the basic principles of mathematics. Incorrect calculations are simply not allowed.

You can find out the latest calculations on the program icon

How to view calculator history on iPhone

It often happens that when using the calculator on your phone, a situation occurs when the calculated data was lost from the field of view and was not recorded. I would like to restore them and view the history of reports in the application. Unfortunately, this function is not available on a standard calculator.

Note! The maximum result that can be obtained is the last calculations that will be displayed on the application icon, if they have not been deleted or reset.

If you need to frequently return to previous calculations, then it is advisable to install another calculator, for example, “Calculator HD Pro Lite” or Calcbot. You can use other programs, the main thing is that they have a function for saving the history of calculations.

If calculators on Mac are often used, then such a function is there. It is necessary to go through the path: “Window”. “Show the tape of calculations”.

Where is the calculator on Apple Watch

Unlike tablets, smartwatches are equipped with a standard calculator that can perform basic arithmetic calculations. It is located in the main menu of the watch, just like on the iPhone. To open it, you just need to click on the computer-shaped icon. Then you can start making calculations. The program is not equipped with so many functions that the iPhone has, and is only capable of performing basic calculations.

Calculator app is always on the main menu

How to Count Percentage on iPhone Calculator

Counting in your head is useful, but it will be difficult to calculate large numbers in this way, especially when high speed is required. The iPhone calculator comes to the rescue. For example, to calculate a 4% discount on the purchase of a gadget that costs 25 thousand . (this is finding the percentage of the number), you must enter: 25 000 4 and enter the signs “%” and “=” alternately. The result will be 1000 . discounts.

One more example. Let’s say you need to put 700 thousand . on a deposit at 20% per annum. To calculate the final profit, you need to enter: 700,000 by 2 and press the “%” and “=” signs. The result will be 140 thousand . net profit.

The program may disappear on new operating systems, where it is possible to remove standard components

How to change the battery?

First, you need to prepare the necessary tools. The user will need to purchase an original battery with an adhesive tape holder. In addition, you should have a rubber mat, a Phillips screwdriver, a plastic spatula, and tweezers on hand. Before replacing the battery, turn off the “iPhone” by holding down the Power button. Then you need to unscrew the bolts located on the bottom of the mobile device with a Phillips screwdriver. To open the phone, you can use a regular suction cup, which you need to stick to the display just above the HOME button. A similar manipulation can be carried out using any object with a sharp tip. At this point, take your time and open the display module with sudden movements. Then you should unscrew the two bolts and remove the metal plate. The next step is to deal with the trains. You need to be very careful, as you only need to disconnect the ribbon cable connector, and not everything together with the connector. The owner of the gadget needs to carefully disconnect the cable of the HOME button, touchscreen and display. Finally, the display module can be released and set aside.

Use a plastic tool to pick up and disconnect the battery cable. Armed with tweezers, you need to pick up the black tab of the glue pad. It is very important to carry out this manipulation carefully. If the tape will be difficult to stretch, you need to make it so that it overtakes the right corner of the battery. Pull the tape until it appears completely. Then you should do the same manipulations with the second tape. If there is resistance when pulling, you need to pull the tape so that it goes around the left corner of the battery.

In the event that one of the belts breaks, do not despair. It is enough to warm up the side of the case that is opposite to the place where the battery is attached. To do this, you can use a regular hair dryer. This will help loosen the adhesive layer. The battery can be pry off with any flat object. Experts do not recommend touching it from the side of the motherboard, as this can damage the gadget. As a result of the manipulations done, the battery will easily peel off from the body of the gadget. At the finish line, you can unpack the new battery and replace the battery. In order for the battery to sit tight, it is recommended to apply a little pressure on it. Then you should reassemble the mobile device. The presented instructions give an answer to the question of how to change the battery on the “iPhone-6”.

Battery wear check

Any battery provides a certain number of charging cycles. On average, an “iPhone” battery is rated for 500 complete cycles. After that, the battery does not stop functioning, however, it gives out a smaller power charge, which gradually decreases. In this regard, many users have a question about how to change the battery and ensure the normal functioning of the gadget.?

The user can independently test the battery and set the percentage of wear. To do this, use the special program coconutBattery. This application will let you know how many charging cycles have occurred in the smartphone, as well as the actual capacity. The information received will help to change the battery in the iPhone in a timely manner.

Consequences of battery wear

In plastic iPhones, the user can observe a change in shape, which will become more convex over time. Minor cracks may also appear on the body, increasing in size. In the case of more modern iPhones, a slight bulging of the screen can be observed. Therefore, if you see streaks when you press the display, it is recommended to immediately change the battery to “iPhone”.

Sometimes, device owners can visually identify a damaged battery. For some users, the battery greatly increased in size and even opened the lid of the gadget. In addition, a damaged battery can cause an unpleasant odor. It is not necessary to bring the battery to such a state. Experts recommend replacing the battery in a timely manner. Otherwise, the body of the “iPhone” may be strongly deformed or spontaneous combustion of the device will occur.

When and why to change the battery?

Apple mobile devices are called long-livers due to their high quality and durability. All iPhones, especially the models created under Steven Jobs, amaze with excellent assembly and can work without problems for several years. However, some owners underestimate the excellent quality of mobile devices and are in a hurry to purchase improved models.

It is not always necessary to get rid of the gadget when the first failures appear, since it is enough to change the battery in a mobile phone. It is important for smartphone owners to know that the useful life of a Li-Ion battery is measured in 3-5 years. After this period, it is recommended to replace the battery.

general information

In the modern rhythm of life, not all users have the opportunity to adhere to the norms of proper smartphone charging. As a result, many people have a question about how to change the battery and restore the phone’s performance.

This is because the battery cannot handle the heavy load. However, do not give up, because to solve this problem, it is enough to change the battery to “iPhone”.

How to change the battery on an “iPhone”: expert advice

Experts do not recommend resorting to the help of pseudo-workshops that provide battery replacement services. It is better to contact an official service center, where professionals in their field will be able to change the battery for an “iPhone-6” or another model in a matter of minutes. However, users can save a lot by changing the battery themselves.

Brief conclusion

Over time, the rechargeable battery becomes unusable on all mobile devices. Battery life depends on proper charging, operating mode and storage conditions.

If the “iPhone” is not used for a long period of time, then the battery may become unusable within one year. With theoretical knowledge, you can change the battery in a matter of minutes. The article outlines all the subtleties and nuances that describe this process in detail. All manipulations must be carried out carefully and carefully, despite the fact that the smartphone is assembled efficiently and very tightly.

Checking with built-in iOS functions

On March 29, 2018, the long-awaited iOS 11.3 update was released. Along with it came a feature that was associated with the scandal over the slowdown of old iPhones.

So if you have already installed iOS 11.3, then we do the following:

  • open Settings and scroll down until we find the Battery;
  • select the item Battery status;
  • we see the Maximum capacity field and if you have at least 60%, then you can relax for now, but already think about replacing in the near future.

Settings. Battery. Battery status. Maximum capacity

You’ve probably seen the second “Peak Performance” field as well. So, when everything is really bad with your battery, the phone will send you a notification that an understatement of performance is turned on.

This, in fact, will be the bell for replacing the battery. Thus, Apple killed all the applications that did the status check function, but they may still come in handy. Read on.

How to check iPhone battery health?

At the moment, a modern smartphone is primarily judged by two criteria: the camera and how long the battery lasts. The first moment improves from year to year, but with batteries it is problematic, especially on the iPhone.

After all, literally after a couple of years of use, the operating time of the device is reduced very significantly and you already need to think that you need to do something about this. This is especially felt by people who live in countries with cold winters.

Therefore, let’s figure out exactly when it is worth changing and how to check the condition of your iPhone battery. With some updates to the operating system, it is much easier than it used to be.

How to check iPhone battery status?

If you went to this material, then for sure your iPhone does not hold a charge for long and you charge it at least twice a day. Or, it often turns off in the cold at the most inconvenient moment, even when the charge level is about 40%.

To understand how bad everything is and whether it is worth worrying about a replacement, you just need to carry out one of the actions, which I will now list.

We check with the help of third-party programs (if iOS is lower than iOS 11.3 version)

Not everyone wants to upgrade from iOS 10 to their old iPhone 5S or iPhone 6 for this feature. We all know how it works and it is better to stay on an older version of the operating system.

Sooner or later, you may still need to check the battery status, and in this case, we do the following:

  • install ourselves an application like Battery Life (or something similar);
  • we open it and the state of your battery is written to you.

If everything is fine, it will simply say “Excellent” and the button will be green. Yellow, still not so bad and red. when to change.

It weighs a little and is free. If you buy a paid version, it will also show the number of charging cycles. But it’s up to you to decide.

Battery Pro (for iOS)

The mobile application looks ugly and does not differ in the accuracy of measurements. It claims my iPhone battery is in perfect condition. 0.0% wear.

At the same time, it determines the residual capacity at the level of 2000/2000 mAh (remember, in general, in the iPhone 7. 1950 mAh).

In addition, there is data on the source of the charge, which is similar to the truth, determining the operating time of the device and other additional information.

Recommend using this app only, if you don’t have a Mac at hand for more accurate tests.

How to check iPhone battery wear%. How many do you have?

After a wave of controversial opinions from readers about Eduard Sargsyan’s collection of tips on how to extend iPhone battery life, I checked the wear of my.

For 163 days after activation and 140 full charge-discharge cycles, the state of the battery of my 7 is excellent. And the capacity reaches 98% of the declared.

  • I charge my iPhone with iPad charging 95% of the time
  • I keep my smartphone connected to Mac for a couple of hours daily
  • always I connect it to the charger for the whole night
  • used the dubious Lightning of the Rock company (they just fell apart in a couple of months), and today he preferred Native Union (like MFi, quality at 5)
  • I put my iPhone in Xiaomi power banks and auto-chargers (I think it’s okay here)
  • I do not follow the temperature regime from the word at all (summer and a regular beach are ahead)

coconut Battery (for macOS)

In my opinion, this is the best application for determining the level of wear of the iPhone battery, which can be found on the iOS Device tab.

Here you can see the number of full charge-discharge cycles (after 500, experts recommend changing the battery), residual capacity (see Maximum Charge) and other data.

Based on this information, I am guided about the consequences of my “bad habits” of handling the iPhone. lowered the level to 98%.

This application is also interesting for diagnosing the MacBook battery. for a year and a half of super-intensive use, I “killed” mine up to 92% of the declared capacity.

iBackupBot (for Windows)

The data of this “scary” application, which I recommend to Windows users in the absence of coconut Battery, does not match the previous ones.

This is strange. they generally claim that I can charge the iPhone up to 2000 mAh out of 1950 possible. But I suggest taking this as the ideal state of the battery.

Information can be accessed from the Information menu. Look at DesignCapacity is the stated capacity, FullChargeCapacity is the state of the battery today.

Eventually:

In almost half a year of intensive use, two out of three tests indicate the perfect condition of the battery of my iPhone 7, and one about a drop in capacity by 2%.

On this occasion, in order to put everything in its place, I propose a small interactive: let’s all together check the iPhone batteries and talk about their wear and tear and our “bad habits” in the Комментарии и мнения владельцев.

Thus, we will decide once and for all whether it makes sense to charge your smartphone with care. Or you can just use it and have fun.

UPD: There is a possibility that the software used in the article does not have access to information about the iPhone 7 / Plus battery.

Through settings

Over time, the capacity of the battery decreases steadily due to the constant charge-discharge cycle. This is normal. iPhone battery capacity drops by 20 percent after just 500 cycles. Therefore, checking the iPhone battery is an important process when caring for your device. If the smartphone’s firmware has been updated to version 11.3 or higher, information about the charge, use and battery status is available in the settings. Below are detailed instructions on how to check the battery on an iPhone.

  • Open the “Settings” menu.
  • Select “Battery“.
  • Go to the “Battery Status”.

In the window that opens, the smartphone will show what is the maximum percentage of the battery charge at the current moment relative to the initial value. If the indicator is below 50 percent, then it’s time to take the phone for repair. The lower the maximum capacity, the faster the phone sits down, and the increased number of recharge cycles provokes faster battery wear.

Checking iPhone battery wear

To make your smartphone battery last longer, you need to follow simple guidelines that will significantly reduce wear and tear and extend the lifespan. And to find out how rationally to use the old battery in the iPhone, there are two ways: using standard iPhone tools or using a computer program.

Battery Check Using iBackupBot Windows Program

If you would like to know more about your iPhone’s battery wear and tear, you can use desktop PC software. There is a program for the Windows operating system called iBackupBot. It is paid and costs 35 dollars, but during the first 7 days you can use it for free.

In order to check the level of battery wear using iBackupBot, launch it on your computer and connect the iPhone using a cable. After that, you need to wait a little while the program detects the device and creates its profile. When the device is detected, pay attention to the left side of the window and select your iPhone here.

Then open the section “Information”.

As a result, you will be presented with information about the level of wear of the battery of your iPhone. There will be many parameters here, the most important of which we will consider separately.

  • CycleCount. the number of charging and discharging cycles of the battery;
  • DesignCapacity. Initial battery capacity;
  • FullChargeCapacity Current battery capacity.

The number of charging and discharging cycles of the battery is another very important parameter that speaks about the deterioration of the battery. The more cycles the battery has passed, the worse its condition. If your battery has more than 500 cycles, then it’s time to think about replacing it.

How to check iPhone battery wear%. How many do you have?

After a wave of controversial opinions from readers about Eduard Sargsyan’s collection of tips on how to extend iPhone battery life, I checked the wear of my.

For 163 days after activation and 140 full charge-discharge cycles, the state of the battery of my 7 is excellent. And the capacity reaches 98% of the declared.

  • I charge my iPhone with iPad charging 95% of the time
  • I keep my smartphone connected to Mac for a couple of hours daily
  • always I connect it to the charger for the whole night
  • used the dubious Lightning of the Rock company (they just fell apart in a couple of months), and today he preferred Native Union (like MFi, quality at 5)
  • I put my iPhone in Xiaomi power banks and auto-chargers (I think it’s okay here)
  • I do not follow the temperature regime from the word at all (summer and a regular beach are ahead)

How to check iPhone battery health?

At the moment, a modern smartphone is primarily judged by two criteria: the camera and how long the battery lasts. The first moment improves from year to year, but with batteries it is problematic, especially on the iPhone.

After all, literally after a couple of years of use, the operating time of the device is reduced very significantly and you already need to think that you need to do something about this. This is especially felt by people who live in countries with cold winters.

Therefore, let’s figure out exactly when it is worth changing and how to check the condition of your iPhone battery. With some updates to the operating system, it is much easier than it used to be.

iBackupBot

Another useful program for opponents of MacBooks, but looking for how to check the battery on the iPhone, people. iBackupBot. Designed for installation on personal computers running Windows. This miracle costs 35 dollars, but users are provided with demo access for a week. that’s enough for a one-time check. How to use the program:

  • connect your iPhone to your computer using a cable;
  • open the program;
  • wait for the application to recognize the device;
  • select a defined smartphone from the menu;
  • go to the “Information” section.
  • CycleCount. number of recharge cycles.
  • DesignCapacity. battery capacity upon purchase.
  • FullChargeCapacity. current capacity value.

Remember that it is important to take care of your smartphone battery. Clean up trash in time, delete useless applications, let the device “rest”. And then the iPhone will retain the original battery capacity for a long time, and will also delight the owner with high performance.

Checking Battery Wear Using iOS Apps

For example, you can use the Battery Life app. After launching this application, you will see the percentage of wear on your battery, as estimated by the application. In the screenshot below, that’s 87 percent.

If you wish, you can see more detailed information about the battery of your iPhone. To do this, click on the button in the upper left corner of the screen and go to the “Raw Data” section.

Here you will see two options: Capacity and Battery Charge. The Battery Charge setting is just the current charge level of your iPhone, it’s not interesting. But the “Capacity” parameter is more interesting. It shows the current capacity of your battery (in the screenshot it is 2400 mAh) and the initial capacity of your battery (in the screenshot it is 2750 mAh).

It is the difference between these values ​​that is calculated as a percentage. The greater the difference between the current and the original capacity, the worse the battery condition.

IPhone Standard Tools

IOS 12 introduces a new feature in testing that allows you to see the current state of the battery.

  • Go to “Battery Status”.
  • In the menu that opens, you will see the “Maximum capacity” column, which indicates the state of the phone’s battery. In case you see a reading of 100%, the battery has the maximum capacity. Over time, this indicator will decline. For example, in our example, it is 81%. this means that over time the capacity has decreased by 19%, therefore, the device has to be charged a little more often. If this indicator drops to 60% and below, it is strongly recommended to replace the phone battery.
  • Checking iPhone battery wear

    To make your smartphone battery last longer, you need to follow simple guidelines that will significantly reduce wear and tear and extend the lifespan. And to find out how rationally to use the old battery in the iPhone, there are two ways: using standard iPhone tools or using a computer program.

    iBackupBot

    IBackupBot is a special iTunes add-on that allows you to manage iPhone files. Of the additional capabilities of this tool, the section for viewing the status of the iPhone battery.

    Please note that iTunes must be installed on your computer for iBackupBot to work.

    • Download the iBackupBot program from the developer’s official website and install it on your computer.
    • Connect iPhone to computer with USB cable and then launch iBackupBot. The smartphone menu will be displayed in the left part of the window, in which you should select the “iPhone” item. A window with information about the phone will appear on the right. To get information about the battery status, click on the “Information” button.
  • A new window will appear on the screen, in the upper part of which we are interested in the “Battery” block. It contains the following indicators:
  • CycleCount. This indicator means the number of complete charging cycles of the smartphone;
  • DesignCapacity. Initial battery capacity;
  • FullChargeCapacity. Actual battery capacity based on wear and tear.
  • Thus, if the indicators “DesignCapacity” and “FullChargeCapacity” are close in value, the smartphone’s battery is normal. But if these numbers are very different, you should think about replacing the battery with a new one.

    Any of the two methods given in the article will give you comprehensive information about the condition of your battery.

    How to check iPhone and iPad battery health as accurately as possible on PC

    There are several different ways to check the battery health of your iPhone and iPad. The most accurate of these, using the coconutBattery application, assumes that the user has a Mac, which, of course, many do not. Fortunately, you can check battery health most accurately on Windows computers, and it’s completely free. This manual told how.

    Because of this, iPhone and iPad users are strongly advised to check the battery status of their mobile devices using special computer utilities. On Mac, this program is coconutBattery, and on Windows computers, iTools or iMazing. In both cases, the check is absolutely free.

    How to check iPhone and iPad battery health as accurately as possible on PC

    Download the iMazing utility from the developer’s official website. Install and run the program.

    Note that after launching, iMazing asks for activation. it is not required to perform it, since the function of checking the battery status we require is available completely free of charge. This request should be clicked “Later”.

    Find out Your iPhone BATTERY Cycle Count!

    Connect your iPhone or iPad to your computer with a USB cable. The device will be identified in iMazing. If this does not happen, then it means that your iPhone or iPad has not been detected in iTunes before. It is required to launch iTunes and allow the mobile device to trust your computer.

    On the device page, click on the battery icon.

    Done! The window that opens shows technical information about the battery of your iPhone or iPad. Pay attention to the line “Maximum effective charge”, which indicates the remaining battery capacity in numerical and percentage terms. Important! If the battery of your iPhone or iPad is old enough, for example, its level of residual capacity is 85 percent or less, then the indicator in the line “Maximum effective charge” in iMazing and iTools will jump, this is due to the chemical nature of lithium-ion batteries. However, the drops will be about 1-2%, which will make it possible to get an understanding of the real state of the battery.

    How to check battery wear level on iPhone

    IPhone settings can be used to find out the battery life and which apps are draining the device’s battery the most. But, in the settings there is no information about the state of the iPhone battery and what level of wear it has.

    Fortunately, this information can be obtained using third-party applications and programs. In this post, we are going to show you how to check battery wear on iPhone using iOS apps and programs for Windows and macOS. Information will be relevant for all iPhone models, iPhone including 4, 4s, 5, 5s, se, 6, 6s, 7, 8 and iPhone X.

    Checking Battery Wear Using iOS Apps

    For example, you can use the Battery Life app. After launching this application, you will see the percentage of wear on your battery, as estimated by the application. In the screenshot below, that’s 87 percent.

    If you wish, you can see more detailed information about the battery of your iPhone. To do this, click on the button in the upper left corner of the screen and go to the “Raw Data” section.

    Here you will see two options: Capacity and Battery Charge. The Battery Charge setting is just the current charge level of your iPhone, it’s not interesting. But the “Capacity” parameter is more interesting. It shows the current capacity of your battery (in the screenshot it is 2400 mAh) and the initial capacity of your battery (in the screenshot it is 2750 mAh).

    It is the difference between these values ​​that is calculated as a percentage. The greater the difference between the current and the original capacity, the worse the battery condition.

    Battery Check Using iBackupBot Windows Program

    If you would like to know more about your iPhone’s battery wear and tear, you can use desktop PC software. There is a program for the Windows operating system called iBackupBot. It is paid and costs 35 dollars, but during the first 7 days you can use it for free.

    In order to check the level of battery wear using iBackupBot, launch it on your computer and connect the iPhone using a cable. After that, you need to wait a little while the program detects the device and creates its profile. When the device is detected, pay attention to the left side of the window and select your iPhone here.

    iPhone 11 / 11 Pro Max: How to Add Battery Percentage % Sign? Can View, Not Add

    Then open the section “Information”.

    As a result, you will be presented with information about the level of wear of the battery of your iPhone. There will be many parameters here, the most important of which we will consider separately.

    • CycleCount. the number of charging and discharging cycles of the battery;
    • DesignCapacity. Initial battery capacity;
    • FullChargeCapacity Current battery capacity.

    The number of charging and discharging cycles of the battery is another very important parameter that speaks about the deterioration of the battery. The more cycles the battery has passed, the worse its condition. If your battery has more than 500 cycles, then it’s time to think about replacing it.

    Checking the battery using macOS CoconutBattery

    If you have a macOS computer, you can check battery wear using the CoconutBattery program. The main purpose of this program is to view information about the MacBook battery, but it can also provide information about connected iOS devices (iPhone, iPad, etc.).

    In order to use this method of checking the battery, simply connect the iPhone to your computer, run the CoconutBattery program and go to the “iOS Device” section.

    As a result, you will see a screen with information about the iPhone battery. This will show the current battery level (Current Charge), maximum battery capacity (Full Charge Capacity), initial battery capacity (Design capacity), the number of battery charging cycles (Cycle Count), and other parameters.

    As you can see, the amount of information here is almost the same as in the iBackupBot program.

    How to check the battery life of an iPhone or iPad using a computer?

    There are many programs that can give us all the information we need about the battery. These are the famous iTools, iFunBox and many others. However, they are heaped up with various functions (sometimes very unnecessary), and we only need battery statistics! Therefore, in this case, I advise you to use iBackupBot. the desired function is also not the main one in it, however, the minimum size of the program and a simple interface speaks in its favor.

    • Install and run the program.
    • We connect the phone to the computer. To connect correctly, you need to unlock your iPhone or iPad (if a password is set on the screen, then enter it) and in the dialog box that appears, click “Trust this computer”.
    • In the lower left corner we see the name of the device, click on it, then. information.
    • In the window that opens, we immediately see all the information about the battery.

    Since all the inscriptions are in English, I will give a small decryption of the data obtained:

    • CycleCount. the number of complete recharges of the battery.
    • DesignCapacity. the capacity that the new gadget originally had.
    • FullChargeCapacity. current capacity.
    • Status: Success. general characteristics of the battery at the moment.

    As you can see, my iPhone 5S’s capacity dropped by only 150 mAh in 2.5 years, and this is a very good result! In fact, it is almost new. How did you manage to achieve such indicators? I just know how to properly charge my iPhones and iPads, try it too. there is nothing complicated there.

    How to find out the real (at the moment) battery capacity in iPhone and iPad

    Greetings! There can be a variety of reasons why you need to check how much battery capacity is left on your iPhone or iPad. A similar need may arise out of simple curiosity: for example, I became interested. do I need to go to change the battery of my old iPhone 5S? Or is she not so bad yet?

    Also, such a procedure is of great importance during the purchase of a used device. After all, the seller can simply deceive. say that his battery holds exactly as much as it should. And even show usage statistics (you can easily wind it up), but in fact, half of the capacity has already been lost there. How to find out the truth about the state of the battery. is it bad or not? Nobody will wait a few hours to check! There are easier and faster ways. let’s talk about them, let’s go!

    Important note. We receive all data about the battery for free, without jailbreaking the device and other jailbreak. Cool? Not that word!

    How to view iPhone X battery percentage

    Apps that will tell you everything about the battery status in an iPhone or iPad

    Unfortunately, no one is safe from the situation when a computer is not at hand, and it is necessary to check the battery life of an iOS device here and now. Various applications from the App Store can help us with this. The best part is that you do not need to jailbreak the device and install a jailbreak. everything happens without it.

    At the time of writing this article, a huge number of programs (about 15-20) have been in one way or another related to the battery on my iPhone. And only in one of them all data (charge cycles, actual capacity, etc.) were shown for free, immediately after installation and without any additional purchases.

    Meet Battery Life. App Store download link. Install and run. Click in the upper left corner. the settings open, we are interested in the menu item. Raw Data. And we can clearly see all the information (also displayed in real time!).

    • Battery Charge. the indicator means how much the battery is currently charged and how much it can charge as much as possible.
    • Capacity. current \ standard battery capacity.
    • Cycles. number of recharge cycles.

    The attentive reader will notice that the data for my device is slightly different for different checks (using the computer and the application). How so?!

    Firstly, this difference is really small. an error of 3-5%. And secondly, this is completely normal. since different programs use different algorithms. And besides, the battery of my iPhone 5S works for a long time (almost 2.5 years) and, as it seems to me, it is impossible to accurately analyze its use for such a long period of time.

    Total: the check can be carried out by any option presented in the article. the general “picture” of the battery life of your iPhone (iPad) will be immediately clear. To get the most plausible values ​​- use both methods, and choose the average of what you get.

    How to see the percentage of battery charge on iPhone 12, iPhone 12 Pro, iPhone 11, iPhone 11 Pro, iPhone XS, iPhone XR, iPhone X from Control Center

    Touch your finger to the right “ear” at the top of the screen, where the battery indicator is located.

    Swipe down to bring up Control Center.

    An icon will appear in the upper right corner indicating the battery charge as a percentage.

    Swipe up the screen to close Control Center.

    Of course, this method takes some time, unlike other iPhones, where the percentages are always visible on the screen.

    Despite the absence of the corresponding option in the “Settings”, you can still find out how much charge remains in percentage.

    Battery level on iPhone 12, 12 Pro, 11, 11 Pro, XS, XR, X as a percentage: how to turn it on. 3 ways

    It is very easy to find out the battery charge level on all old iPhone models, just go to “Settings” → “Battery” and enable the “Charge percentage” option.

    How to see iPhone 12, iPhone 12 Pro, iPhone 11, iPhone 11 Pro, iPhone XS, iPhone XR, iPhone X battery percentage on the home screen

    Press and hold your finger on an empty spot on the iPhone home screen.

    Click on the appeared button “” in the upper left corner.

    Scroll to the bottom of the widget screen and select Batteries.

    Select the type of widget display and click Add widget.

    Move the widget to the desired location on the screen and tap Done in the upper right corner of the home screen to apply the settings.

    How to find out the percentage of battery charge on iPhone 12, iPhone 12 Pro, iPhone 11, iPhone 11 Pro, iPhone XS, iPhone XR, iPhone X using Siri

    Call your personal assistant Siri and say, for example, “How much charge does the iPhone have?”, After which you will receive an answer as a percentage of the charge of the iPhone.

    Is it possible to enable battery percentage on iPhone 12, iPhone 12 Pro, iPhone 11, iPhone 11 Pro, iPhone XS, iPhone XR, iPhone X on all screens?

    Unfortunately, no. the “ears” in the iPhone equipped with a Face ID scanner do not leave room for displaying percentages. Many other arguments can be given, but this will not change the fact that people are used to always seeing the battery level as a percentage on their screen, at least optionally. The lack of such an opportunity causes discomfort for many iPhone owners.

    TURBION.NET 2021