How to restore the iPhone password via iTunes

How to recover iPhone password via iTunes

What to do if you forgot your iPhone password. a question that puzzles any Apple product owner. Solutions to the problem. in the material of RIA Novosti. RIA Novosti, 24.12.2020

MOSCOW, Dec. 24. RIA Novosti. What to do if you forgot your iPhone password. a question that baffles any Apple product owner. RIA Novosti has a solution to the problem.How to unlock iPhone through iTunesSpecial program for owners of Apple products can help in the case of a forgotten password from the gadget. This does not need an expert consultation or a trip to the service center.If you have forgotten your iPhone password, it is enough:If you have iCloud installed on your phone and wireless data transfer is enabled, you can restore the gadget with the help of your personal account, when you have forgotten your iPhone password. To do this, you must:After the process will be reset to zero and the question “how to restore the password on the iPhone” will disappear by itself.Reset the wrong attempts counterIf you have set up synchronization with your computer through iTunes, you can unlock your iPhone by resetting the wrong attempts counter. The method is suitable if the password is not forgotten, and before the next attempt to enter it on the screen are displayed not minutes, but hours and days.The algorithm of actions is as follows:Note that if the iPhone has not previously synchronized with the PC, you will not be able to reset the counter.The recovery mode to unlock the iPhone, if you forgot your passwordOzero phone settings can be in Recovery Mode. This is another answer to the question what to do if you forgot your iPhone password. In Recovery Mode, the gadget will roll back to the restore point.This will require:Important: If error 3004 appears during the installation of new firmware, close all browsers and make Internet Explorer your default browser.Note that for iPhone 8 and higher the Recovery Mode starts in a different way. Smartphone should be turned off and connected to the computer, then quickly press and release the volume up button, and after the same operation to do with the volume down button. At the end you need to press the “Power” button and Recovery Mode will start.Installing new firmware via DFU mode on iPhone if you forgot your passwordYou can also launch iPhone using DFU mode. But in this case it will revert to the default state and you will need to restore the information from scratch.You will need:Example, how to put iPhone X in recovery mode DFUAiophone 10 model with a forgotten password can be restored as follows:After that, you can perform the same steps as in Recovery Mode: install new firmware.What to do if nothing helps?If there is no access to a computer with authorized iTunes, you can use third-party applications to restore a locked iPhone, such as iMyFone LockWiper or 4uKey. The first conducts the recovery through DFU mode, substituting iTunes, and the second allows you to reset the iPhone to factory settings and install the firmware without iTunes.If nothing helps, you are left to turn to the professionals. the service center knows what to do if you forgot your iPhone password. During the visit you must have the documents confirming the ownership of the iPhone. Only in this case, the experts will be able to tell you how to unlock your iPhone, if you forgot your password.Why the iPhone can be lockedBlocking the iPhone is possible if:

How to bypass iPhone password without iTunes

If you want the most success, FoneLab Unlocker for iOS is your first choice. The whole process of unlocking iPhone password is easy to operate. You can easily remove the iPhone lock screen password by following the wizard on the screen. All you need to do is connect your iPhone to your computer.

Later, follow the iPhone password bypass screen instructions to get your iPhone back. You also need to provide your Apple ID and password. This can prove that you are the real owner of the locked iPhone. Well, here are the main features of the iOS password removal tool.

  • Bypass the 4-digit and 6-digit iPhone passcode with the highest probability of success.
  • Remove a forgotten password from a locked, disabled or used iPhone.
  • Compatible with the latest iPhone 13 and iOS 15 devices.
  • Safe, clean and easy to use.
See also  How to lower the screen on the iPhone

Now go to the guide on how to bypass iPhone password.

FoneLab Helps you unlock iPhone screen, remove Apple ID or its password, remove screen time or password restriction in seconds.

  • Helps you unlock iPhone screen.
  • Deletes Apple ID or its password.
  • Remove screen time or password restriction in seconds.

Step 1 Presentation of FoneLab Unlocker for iOS after installation. Select Wipe password to bypass the iPhone password.

unlock the interface

Step 2 Press Start in Wipe password screen. Connect your iPhone to your computer with a Lightning USB cable.

Step 3 Check detected iPhone information. Press Start to confirm and move on. The program will immediately start downloading the firmware package.

Step 4 Press Unlock to unlock iPhone forgotten password.

Step 5 In Confirm unlock screen, enter 0000 in the desired location. Finally, click Unlock to bypass iPhone password without iTunes or fingerprint.

How to unlock iPhone without iTunes. Tenorshare 4uKey’s perfect assistant

Tenorshare 4uKey is a great helper for unlocking your phone if you forget its password or when the iPhone is disabled. No matter what type of password is installed on your iPhone (six-digit code, four-digit numeric code, Touch ID or Face ID), the program will download the new firmware to your device in a few minutes. You do not need to worry that the program will allow third parties to get into your iPhone: Tenorshare 4uKey allows you to bypass the phone lock password, not the lock in case the device is stolen or lost, where you need to know your Apple account password. Keep in mind that after you remove the password, the latest version of the operating system will be installed on your phone, and all personal data will be deleted. If you previously backed up your files, you will be able to restore them to your device after you remove the password. Make sure your iPhone has enough battery power before you start.

Download the firmware from the official developer’s website and install it on your PC.

Run Tenorshare 4uKey program. Connect your iPhone to PC with USB cable.

Once the software detects your device, select “Start”. If your device was not detected, follow the steps to put your iPhone into recovery mode according to the prompts in the program window.

Press “Download” to download the firmware package for your phone model. At this point you can specify the path to save the firmware version on your PC, as well as download the firmware version you already have on your PC (press “Select”) or download it through a web browser (press “Copy”).

After the firmware package download is completed, select “Start unlock”. To ensure the correct operation of the software, do not power off the device or use it.

After you complete removing iPhone password, you can set up your device as a new one or restore data from the backup you made earlier.

Thus, it is possible to remove the password on a locked iPhone, although personal data may not always be saved. At the same time, if you’ve backed up your files before, they can be restored on a reflashed iPhone.

How to reset your iPhone if you forgot your password

If you’ve never synced your iPhone with iTunes, you don’t have a backup, and you don’t have “Find iPhone” activated in iCloud, there’s only the recovery mode method left to remove your password. Note that this method always works, but the iPhone will not only delete the password, but all the media files and information.

To enter recovery mode: turn off your iPhone, now hold down the home button and without releasing it, insert the USB cable, you should see an iTunes icon with a lanyard.

If iTunes does not open automatically, open it. You should be prompted to upgrade or restore your iPhone.

Choose “Restore” and wait until the restore is finished. At the end of the process, the iPhone will be “clean” as from the store and without passwords. Use!

Still have questions?

You still have questions about unlocking your phone if you forgot your iPhone password? You’re having trouble recovering your forgotten iPhone ID? Write in the Комментарии и мнения владельцев and we will try to help you!

If none of these steps worked for you or you don’t remember your Apple ID! Check out this tutorial What to do if you forget to iCloud, iTunes or the App Store? How to reset a forgotten Apple ID password

Bypassing iPhone X password. 3 Ways

If you recently synced your iPhone ten with iTunes on your computer, you can restore it with the software. This is how you can bypass iPhone password protection with iTunes.

See also  How to install a call on the iPhone without a computer

Connect your iPhone to the computer where you synced it and open iTunes.

Wait for iTunes to sync your iPhone and back it up.

Once the backup process is complete, click “Restore iPhone”.

When in the process of restoring your iPhone, the settings screen should open, where you should click “Restore from iTunes copy”. After that, you need to select your own device in iTunes. Look at the creation date and size of each backup and choose the most suitable one.

If you have never synced with iTunes or set up the “Find iPhone” feature in iCloud, you will need to use recovery mode to restore your device. Connect your iOS device to your computer and open iTunes.

Then do a forced reboot:

You need to press and quickly release volume up, then press and quickly release the volume down button. Afterwards press and hold your finger on the power button until the recovery mode screen appears.

When the screen is locked

This is the simplest option. a situation where you don’t know the numeric or numeric-letter passcode that iOS requires every time you unlock the screen (unless Face ID or Touch ID is used). In this case, the smartphone will turn on, but you will not be able to access the information or go any further than the lock screen without the password.

Even if the code is only four-digit and numeric, you can’t guess it by guessing. After 10 incorrect attempts, input is disabled for 1 minute, and then gets longer, up to hours.

What to do

The only way to unlock an iPhone without a password is to erase all the data on the smartphone and restore the device using a computer. If you have a backup copy in iCloud or iTunes, you can get all the information back later.

Important moment: if you have enabled the Find iPhone function (and it is always active by default), you will be asked for the Apple ID password after the restore. If you enter it, iPhone returns to normal operation. Otherwise you will get another kind of lock. activation lock.

You need a USB cable, a Windows or macOS computer, and iTunes to reset the lock password. If it’s not installed, download it from the Apple website. If you have macOS Catalina or later, you should use the standard Finder app instead of iTunes.

First, turn off your iPhone by holding down the side or top button. Disconnect the cable from the smartphone if it’s connected. Then proceed depending on the model of the device:

  • On iPhone 8, iPhone 8 Plus, second-generation iPhone SE, iPhone X, and newer models: connect the device to your computer with the USB cable while holding down the side button and do not release it until the restore screen appears.
  • On iPhone 7 and iPhone 7 Plus: Hold down the volume down key and connect your smartphone to your PC via USB cable until you see the restore screen.
  • On first-generation iPhone SE, iPhone 6s or older models: Hold down the home button and connect the device to your computer with the USB cable until the recovery screen appears.

When a window appears on the PC screen informing you that an iPhone has been detected and prompting you to restore or update it, click the “Restore” button. At the end of the procedure, enter your Apple ID account password on your iPhone. The device will return to a working state. You will be able to set it up as new or restore data from a backup.

If the waiting time exceeds 15 minutes, the smartphone will exit recovery mode. In this case you will have to repeat the process all over again. reconnect your iPhone to your computer by pressing the necessary button and select “Restore”.

How to unlock iPhone 11 via iTunes

iTunes is well known to all users of Apple products. This program is used to synchronize iPhone with your computer, to create backups of the device, and to restore the phone to factory settings. And in this situation you can also use iTunes, or more precisely, its function of resetting all the settings, followed by restoration of data from a backup copy. If you are interested in how to remove the screen lock on your iPhone using iTunes, use the step-by-step instruction below. Before you start, make sure that you have the latest version of iTunes on your PC, update it if necessary and only then start unlocking your phone.

Connect your iPhone with a USB cable to the PC that was used for the previous synchronization. Launch iTunes on your PC.

See also  The iPhone apps do not update automatically

After you finish syncing your device with iTunes and backing up the locked device, go to the left pane of the program window. Select “Browse” here.

Select “Repair iPhone” option on the right side of the program window. Please note that this resets all settings to factory defaults and deletes all the files on your phone.

After that, you’ll additionally be prompted to confirm iPhone restore. To confirm your decision, click the “Restore” button again. Wait for the process to complete, after which the latest version of the system will be installed on your iPhone and all personal data will be erased.

To restore your files, go to “Browse” again and select the “Recover from iTunes copy” option on the right side of the window. Review the list of available backups and select the most recent one by date. After that, wait for some time to finish setting up your iPhone. You can now set a new password on it.

This method is convenient because users don’t need to download any additional software to perform a factory reset, since iTunes is already installed on every iPhone user. At the same time, it is the users of “apple” products who know that errors can occur in the operation of this program that disrupt the whole process. Nevertheless, as a first attempt, it is quite reasonable to use a program you already have on hand. If you wish to limit your initial attempts to just one, we recommend that you start by using specialized software designed specifically for unlocking iPhone.

Using third-party software to restore the backup password

The second and most effective solution is to use specialized software that can help you perform iPhone backup password recovery. There are several tools that allow you to extract the password, by brute force method. One of the most effective tools in this problem is the iPhone Backup Unlocker, this tool uses three password recovery methods and has an accelerated search method, and is also able to remove iTunes backup password.

First, you need to download and install the program. It’s free but has limitations, once the password is picked you will have a password with the last character locked, and the free version does not have an accelerated password lookup option.

installation proceeds as usual, this should be no problem for you. When the installation is complete, open the program.

To decrypt your iTunes backup, the first step of “Import Backup File” requires you to select the backup whose password you’ve forgotten. If you click on Add you will be taken to the directory where all the backups are kept and you can select any backup there (the file must be named Manifes.plist).

Reset via iTunes

If “Find iPhone” is not enabled on your device, all is not lost. The first thing to do is to put your smartphone or tablet into recovery mode. To do this:

  • iPhone X or newer, iPhone 8 and iPhone 8 Plus: Press and hold the side button and one of the volume buttons until the shutdown slider appears. Pull it to disconnect the device. Connect it to your computer by holding down the side button. Hold it down until you see the recovery mode window.
  • iPhone 7, iPhone 7 Plus and iPod touch 7: Turn off your device. Connect to your computer while holding down the volume down button. Hold it down until you see the restore mode window.
  • iPhone 6s or later, iPod touch 6 or later, iPad with home button: Turn off your device. Connect it to your computer while holding down the Home button. Hold it down until you see the recovery mode window.

After that, open iTunes (or in the Finder if you’ve already upgraded to macOS Catalina). The software will tell you that there’s a problem with the device, and offer to update or restore it. Press “Restore” to erase all data and settings.

Then you can restore your data-or, if you don’t have a backup, set up your device as new. In both cases you will be able to set a new security code and regain access to your device.

I’ve been writing about gadgets since 2014, and I regularly spend a solid chunk of my paycheck on them. Tucked firmly into Apple’s ecosystem, collecting video games and subscriptions, training robot vacuum cleaners.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE