How To Reset Samsung A3 To Factory Settings

Why do you need a factory reset Samsung Galaxy A3

There can be many reasons for this behavior, but the most obvious ones are cluttering up the system with file garbage, conflicting settings, and the possible activity of malicious programs, of which a huge number of them have recently spread. To fix this, you need a hard reset on your Samsung Galaxy A3. By the way, a reset may even be necessary for a new phone if the unlock password is forgotten, or you are going to sell the device and you need to erase all personal data beyond recovery.

Data really cannot be recovered, factory reset on Samsung Galaxy A3 implies that all files, all settings, accounts, passwords, bookmarks, music, all this will be erased from the internal memory of the smartphone. Therefore, if you want to save valuable data for you, then before the reset procedure, be sure to make archive copies of the data and upload these archives to cloud services or to external media. In addition to the usual MicroSD, you can use an external USB-HDD, there is more space, you can completely fit the entire smartphone. So, we have saved the necessary data, now to the procedure itself.

How To Reset Samsung A3 To Factory Settings

Samsung Galaxy A3 factory reset

Any unpleasant surprise causes not the best emotions. Not an exception and blocking a smartphone at an inopportune moment, its braking, uncontrolled reboots, application crashes. In fact, blocking the phone or turning it off, reboot, is a signal to the user that not everything is in order with the gadget, and it’s time to take care of its restoration.

Factory Reset Samsung Galaxy A3: Method 1

  • Go to the settings section;
  • Find the item in the backup and reset list;
  • Tap, the following reset window will open;
  • Click on resetting the device, agree with the request to delete everything;
  • After a few seconds, the smartphone will reboot with clean settings like the one you just bought.

This is the so-called soft method, which is suitable for devices that work normally, the password has not yet been forgotten. You just need to erase all data to transfer the phone, or do a reset before installing a newer firmware, or a major update. It is known that after a Samsung Galaxy A3 hard reset, new system firmwares are installed much faster and more hassle-free, since they are not interfered with by user settings and files.

However, the user does not always have time to make a reset while still on a functioning smartphone. It happens that in the morning the gadget simply does not turn on, or it turns out that the unlock code has been forgotten, and after several attempts the smartphone is locked, turning into a useless fiberglass brick. For this case, there is another way, more rigid, but working flawlessly.

Factory Reset Samsung Galaxy A3: Method 2

  • Turn off the device or make sure that it is turned off by briefly removing the battery
  • Press and hold three buttons. The volume rocker, the device power button, and the home button
  • We hold until the system logo appears, the buttons can be released. The system recovery menu opens
  • Here you need to select the item where there is a mention of factory reset. Move with a rocker, select the power button.
  • By clicking on this item, we immediately agree to the deletion of all user data
  • And as a final touch. Click on reboot system.
  • After rebooting, your smartphone will be completely zeroed to the state before purchase.

After that, you either transfer the gadget to the buyer, or re-configure passwords, install applications, restore accounts from the archive, etc.

Dear Reader! If suddenly the method described in the article did not help you. Help, please, the rest. Write how you dealt with the problem or ask a question. By the way, the answer to your question may already be in the comments.

Please do not remain indifferent. Share useful information with people. If you know the answer to your question. Write, please, the information will be very useful to someone. Thank you in advance!

Take a look at these materials:

Did you like the article? Share with your friends on social networks!

Through code

How to factory reset Samsung? The latter method is used much less often. Using the service code. Need to:

  • Launch the system application “Phone”.
  • Open the dialer.
  • Enter code 27673855 #.
  • The device will reboot and the user information will be deleted.

How to reset Samsung to factory settings

How to reset Samsung to factory settings? On Galaxy tablets and smartphones, you can easily complete this procedure. After reading our material, you will learn about possible methods for Hard Reset and receive instructions.

Reset with buttons

Have you forgotten your unlock password or your device simply won’t turn on? Then you can use another method. Using the Recovery menu. Moving between items in it is carried out on the volume rocker, and the choice of an option is on the power button.

  • When the device is turned off, you need to hold down the volume up, power and “Home” buttons.
  • When the logo appears on the display, release the power key.
  • Wait for the Recovery menu to load.
  • Select the item “Wipe data / factory reset”.
  • Then. “Yes”.
  • Select the item “Reboot system now”.
  • The device will reboot and the data will be erased.

What is a data reset and why is it needed?

Not only Galaxy, but all Android smartphones have a full reset. When this function is activated, the device is rolled back to the factory settings. You get your phone completely clean, just like out of the box.

Therefore, you must first:

  • Transfer all important files from your phone to your flash drive.
  • Make a backup. It will allow you to restore information, save the user a lot of time.
  • Go to settings and delete your Google account. Otherwise, the smartphone will ask you to log in to this account after turning on.

Why would you need a hard reset and factory reset? Let’s list the common reasons:

There are problems with your phone. If they cannot be solved by standard means, then it is recommended to perform a full reset. It is not uncommon to roll back the system to factory settings to help users.

  • You are about to implement an old device, or give it to someone else. Naturally, it is better to erase a huge amount of personal information so that third-party people do not get access to it.
  • Before or after OS upgrade. The developers recommend performing a “clean” installation so that errors from the old version of the operating system do not migrate to the new one.
  • How to reset settings on Samsung? Consider the main ways to rollback the system on devices from a Korean manufacturer.

    Reset via settings menu

    The easiest method is through the menu of the device. This will require:

    Go to settings.

  • Select “General settings”.
  • Then “Reset”.
  • Open the section “Data reset”.
  • Click on the “Reset” button.
  • The device will reboot and the data and settings will be deleted.
  • How to reset Samsung?

    There are several ways to reset the system:

    • Via OS menu.
    • Through Recovery.
    • Using the service code.

    How to reset settings via computer?

    Every Android smartphone has a recovery mode that allows you to erase all data from the internal memory of the smartphone and restore the factory settings. However, this method is not always effective.

    If you failed to perform a hard reset (aka factory reset) via Recovery mode, Google has provided a special command line utility Android Debug Bridge to access your mobile device and execute certain commands through your computer. So you can do a factory reset via your computer.

    We would like to draw your attention to the fact that the ADB command for factory reset via computer is intended for advanced users. But, if you read our instructions carefully, you shouldn’t have any problems.

    Instructions: How to reset settings via a computer?

    Step 1

    Go to the Android Developers website and download the Android System Development Kit. Right click on the ZIP archive and select “Extract All”. Click the “Browse” button and select the “C: \ Program Files” directory.

    Step 2

    Go to the folder where you extracted the files and press “F2” to rename it. Give the folder a simple name like “AndroidADT”.

    Step 3

    Right click on “My Computer” and select “Properties”. Click on the “Advanced system settings” option and in the “Advanced” window click on the “Environment Variables” button.

    Step 4

    In the System Variables window, select the Path option and click the Modify button. When the window for editing system variables opens, scroll to the very end of the line and write the path to the archive that you unpacked earlier (“; C: \ Program Files \ AndroidADT \ sdk \ platform-tools \”) (without quotes). Make sure you add a semicolon at the beginning of the path. Click “OK” to save changes.

    Step 5

    Hover your cursor over the top-right corner of the screen and click the Search button. Write “cmd” in the search field and click on the program icon in the search results to launch a command line window.

    Step 6

    Turn on your smartphone and connect it to your computer’s USB port. Write “adb shell” and press “Enter”. When ADB connects to the mobile device, write “—wipe_data” and press “Enter”. Your phone will reboot into recovery mode and automatically reset to factory settings.

    Now you know how to do a factory reset via a computer.

    Dear Reader! If suddenly the method described in the article did not help you. Help, please, the rest. Write how you dealt with the problem or ask a question. By the way, the answer to your question may already be in the comments.

    Please do not remain indifferent. Share useful information with people. If you know the answer to your question. Write, please, the information will be very useful to someone. Thank you in advance!

    How to Hard Reset Samsung Galaxy A10 Phone from Settings Menu?

    Attention! Because of FRP (Factory Reset Protection, that is, protection against reset), Android will ask you to enter your account login and password, which was assigned before the Hard Reset procedure. Therefore, if you plan to sell a smartphone, you need to log out of your Google account (“Settings”. “Accounts”. “Google”. “Delete account”) before resetting so that the person who receives your phone can activate their profile on it.

    Given the wide range of Android phones and the difficulty of describing the factory reset process for a specific model, we will show the guide using three fundamentally different devices and firmware as examples:

    • Mi A1 on pure Android, which is also used in Nokia, Motorola, OnePlus (has a slightly redesigned system) and in all devices released about the Android One program;
    • Galaxy S7 running Samsung Experience. Recall that the Korean corporation is the largest smartphone manufacturer in the world, so it makes sense to show this shell too;
    • Redmi Note 5 on MIUI. The products of this company are in great demand in the CIS, so we could not ignore it.

    The easiest way to do Hard Reset is through a special menu in the system parameters. Note again that the location and name of the items may differ slightly depending on the phone used. The main thing is to find the main category for recovery and reset.

    Redmi Note 5 (MIUI firmware)

    Open “Settings”.

  • Go to the “Advanced Options” window.
  • Click on “Backup and reset”.
  • Select “Factory data reset”.
  • To remove absolutely all applications and files, check the “Clear internal memory”.
  • It remains to click on “Reset settings” and enter the password, if required.
  • Attention! As you can see, the main thing is to find the “Reset” section. In order to be guaranteed not to “wander” in all parameters in search of the desired menu, it is easier on the main page to enter the query “Reset” in the search box. Select the desired menu from the proposed list and you will immediately get into it. And then everything is as in the instructions.

    Samsung Galaxy S7 (shell Samsung Experience)

    Go to the settings in a way convenient for you.

  • At the bottom, click on the “General Settings” tab.
  • Select “Reset” (“Archive and Reset”).
  • Tap on “Reset data”.
  • Click on the blue reset button.
  • Enter the device PIN and click “Next”.
  • Click on “Delete all” (“Reset device”).

    Your phone will restart. It will remain to customize it as after purchase.

    Factory reset (hard reset) for Samsung Galaxy A10 phone

    There are many reasons why you may need to perform a Hard Reset on your Samsung Galaxy A10 smartphone. Typically, this procedure is performed to restore system performance, which has been violated by viruses, deleting system files, “clumsy” firmware updates, and many other things. Hard Reset is very easy to perform on any smartphone, but you should be aware of the consequences of this action and be able to back up your system and files. We will discuss all this in detail below.

    Xiaomi Mi A1 (pure Android 8.1 Oreo)

    Click on the “Settings” icon in the application menu or launch them using the icon in the notification shade.

  • Scroll down and go to the “System” section.
  • Click “Reset”.
  • Select “Erase All Data” (“Reset to Factory Settings”).
  • Confirm your intention by pressing the button below.
  • Enter the device PIN and click “Continue”.
  • Select “Erase All”.

    The device will reboot and you will need to go through the initial setup again as if it were a new phone.

    How to create a backup?

    Attention! A reset will erase all data on your Samsung Galaxy A10 phone. If you have not backed up your contacts, images, documents and everything else, then you must do so, otherwise you will lose all personal information that was on the device.

    To avoid losing your data, follow these guidelines.

    Transfer photos, documents, etc. To your computer via USB cable. You can also use Google to backup images, and Google Drive cloud service is suitable for documents and folders, but you can “upload” the number of files to it. You will have to pay to expand storage.

  • In order not to lose contacts and applications, activate cloud sync in the settings. Go to the path “System”. “Advanced”. “Backup”. Enable Google Account Backup.

    Once done, you can Hard Reset Samsung Galaxy A10.

    Simple reset

    The most basic option is to factory reset your Samsung Galaxy S3 through settings. To do this, in the “Settings” you need to go to the “Archive and reset” section, where, in fact, carry out the reset, as you can see in the image.

    Depending on the system, the second item can be found in the “Options” or “General tabs”. This simple method is suitable when the decision to reset was not caused by a severe malfunction, but as a preventive measure or troubleshooting minor system problems.

    Reset through recovery

    First you need to completely turn off your smartphone. Some devices, due to a powerful software failure, need drastic measures. Holding down the shutdown button for 10 seconds or even removing the battery. The second is best avoided.

    You can get into recovery on Samsung Galaxy C 3 by holding down three keys. Power on, volume up and home. When the Samsung logo appears, you only need to release the power button. The rest should remain clamped. As a result, a window will appear with a number of inscriptions in English, and in order to reset the Samsung Galaxy S3 to factory settings to the end, you must first select “wipe data and cache” with the volume keys. In order to select, you need to press the power key, confirm your choice with it.

    After a while, a new window will appear. In it, you already need to select “reboot of systems of nau” and, as before, confirm your choice with the power button.

    As complex as the methods described above may seem, the process of resetting your smartphone to factory settings does not take long.

    The reasons

    The longer you use your smartphone, the more likely it will be necessary to perform a factory reset on your Samsung Galaxy S3 in the near future. It is the time of use that is the first reason for the breakdown of the software plan. How is this possible? The fact is that during use, a lot of different programs and games are installed on your device, as well as updates for them. Add here all received and sent messages, calls, contacts, captured photos, etc. Even if you regularly clean the device from the “garbage” that remains after the work of these programs, and delete all files transferred to another device, some of this still remains in the device’s memory. Over time, the performance of the smartphone is noticeably reduced. It is impossible to remove everything unnecessary independently and even programmatically.

    Another reason for reduced productivity, frequent glitches and even self-shutdown may be incompatibility between different versions of installed programs, as well as the Samsung Galaxy C 3 files embedded in the system. Keep in mind that the Android system is constantly improving, improving and changing. Some applications are simply no longer able to function properly together, and a hard reset is needed to resolve this conflict.

    Physical training

    If the preparatory work is completed and all the necessary data has been extracted, you need to take care of the smartphone itself. It is better that it is at least half charged and the memory card is removed. This will protect you from unforeseen troubles.

    Software preparation

    • Memory card.
    • Computer.
    • Google account.
    • “Google Drive”.
    • By the way, don’t forget to check the name of your Google account, as it will be deleted too. Remember that after the Samsung Galaxy S3 mini is reset, nothing will remain on the device and will not be recoverable (except that you move it out of the phone memory in advance).

      Factory reset Samsung Galaxy S3: expert tips and tricks

      There is no such device that would be insured against various failures and software problems. There can be several reasons for the need to carry out a full reset of the device to factory settings, as well as, in fact, ways to carry out this operation.

      What is a Windows factory reset

      Let’s start with the fact that the factory settings are the PC configuration, which is installed initially and is the main one for this unit of equipment. All changes made by the user during use “knock down” the factory settings and the computer is considered not new. Resetting to settings “out of the box”. Transition to the initial state, ie getting rid of user settings in general, and, in some cases, even of files and other data that remained after him.

      It is recommended that you reset only when it is really necessary. Please note that if you have previously reinstalled Windows either yourself or with the help of computer system wizards, you may not be able to go to the factory settings. The whole point is that if you reinstall it incorrectly (stupidly from one disc on which a pirated copy of Windows is written), a special recovery partition disappears on the hard disk, on which a copy of the installation version is stored.

      This indicates that it will simply not be possible to go to the factory settings. You will need the same distribution that was used initially, and not any other (even if the Windows versions are the same). Otherwise, you will not return the computer to its original form (programmatically) in any way. Therefore, treat reinstalling Windows more judiciously and seriously. If you use the services of the wizards, ask them to reinstall Windows so that the recovery partition is not affected. If, nevertheless, the recovery partition has been deleted. All you can do is install any convenient version of Windows using the clean installation method (with the removal of all data) and at least somehow, but create the appearance of a factory reset.

      How to reset Windows 7 to factory settings

      Unfortunately, the “seven” does not support a quick reset to factory settings, which is an obstacle to returning the computer to its original form without using additional knowledge. If your task is to return your computer to its original state, you can use the following options:

      Through “Troubleshoot computer problems” in “Additional boot options”;

    • Using your distribution kit that came with your PC or laptop.

      If you are more inclined to the second option, then you just need to boot from the distribution kit and select System Restore there. Then everything will happen along the knurled.

      In the case of the first option, you need to get to the menu “Additional download options”. For most computers (laptops) this can be done with the F8 key, which must be pressed immediately after the computer starts booting (without exiting standby or hibernation). When it is loaded, you need to select “Troubleshoot computer problems”.

      Next, you will go to the “System Recovery Options” window. It contains some features that can actually be used before booting the system as a whole. Among them, either a built-in reset or a proprietary one will be hidden. In this case, for example, we have the option to restore the factory settings of a Toshiba laptop.

      You will need to go to this item and follow the prompts of the built-in utility so that you can restore the factory settings. Please note that all files on the hard drive that you used / saved will be deleted permanently.

      Factory reset Windows

      Computers love “cleanliness”, both on the hard drive and dust-free on the hardware. If the second question can be dealt with easier. Just to clean, then with the first it is not so easy. The main problem of novice users is the desire to install more “useful” programs and the inability to properly use the computer’s disk space, which leads to malfunctions in its operation. When the situation is at its peak, users have no choice but to reset Windows to factory settings. Our article will describe in detail how to restore the system to the “out of the box” view for different versions, starting with Windows 7.

      How to reset Windows 10 to factory settings

      The top ten retains the same recovery functionality as in Windows 8, but to get there, you need to go a slightly different path.

      To do this, go to “Start” and click “Options”;

    • In the parameters, select “Update and Security”:
    • Among the extended list of items (in different versions of Windows 10 it may look different) we find the item “Recovery” and click it:
    • The menu items of the recovery tools have changed, but we only need one: “Reset the computer to its original state”;
    • After clicking the “Start” button, you will be presented with two options:
      a) Just delete files from your PC (without reinstalling the system);
      b) Completely reinstall the system and delete files. Real factory reset.
      You just choose what you need and then you will need to wait until the end of the process to return to the standard settings.

      The debate continues about which is better than Windows 10 or Windows 7. This phenomenon is not accidental. Microsoft developers claim that nothing is better than Windows 10, and experienced users say the opposite, they say the system is more reliable than Windows 7 now.

      Sometimes, when installing programs or applications, a message appears on the computer screen that error 5 Windows 10 has occurred. This means that the user is denied access. This happens if there are several accounts in the system.

      For a long time we have not had large reviews on our site, let alone such global ones that are related to updating / reinstalling the operating system. Here’s a concise but very helpful overview on how to upgrade to Windows.

      How to reset Windows 8 | 8.1 to factory settings

      In the case of Windows 8, things are more favorable. The system interface provides for the use of the built-in program to restore factory settings directly from the “Control Panel”, as well as from the “Additional boot options”. Let’s look at this in more detail to improve understanding.

      In this version of Windows, the familiar “Control Panel” is there, but you can take an easier way to enter the desired menu. You just need to move the mouse from the right of the screen from top to bottom. This can be done both from the regular interface and from the Metro panel;

    • Select “Options” and then “Change computer settings”:
    • If you have version 8. Select “General”, if 8.1. “Update and recovery”. We have the second option, so we select the appropriate item. Then everything happens the same way in both Windows 8 and Windows 8.1;
    • We select the item “Recovery” and we get three ways to restore the state of the system;
    • The first option is recovery without deleting files, i.E. Depending on which restore point is selected. This is not a return to factory settings, so we discard this option. The second point is to completely delete all user files, computer accounts, etc. The system will be reinstalled from the hidden partition if it is not removed. Otherwise, you will need the distribution kit of the version of Windows that was originally installed. Otherwise, you will not be able to go to the same factory settings. The third option is a combination of the first two and additional ones, which in this case are not relevant.
    • Click “Start” under the second option and go through all the stages with the “Recovery Wizard” gradually. After that, the computer will restart and return to its original state. The process is not fast, but it will be necessary to be near the PC at this time (not all the time. When the system is reinstalled, it will be possible to move away).

      2 comments on “Reset Windows to factory settings”

      I have tried this more than once, but I want to install Win7 back, and I constantly have some kind of errors, although before reinstalling from the disk went fine

      What to do if in Windows 10 sound disappeared on music and, but on applications there is

      Factory Recovery

      This hard reset option is applicable when the device cannot boot the system. For example, during a cyclic reboot (bootloop).

      Turn off your device. To enter “Recovery Mode”, simultaneously hold down the buttons for turning on the screen, “Volume Up” and “Home”. If your device does not have the last key, then just hold down the screen turn on plus “Volume Up”.

    • When the standard screen saver appears on the display with the inscription “Samsung Galaxy”, release the screen power key, and hold the rest for about 10 seconds. The recovery-mod menu should appear. If it didn’t work out, repeat steps 1-2 again, while holding the buttons a little longer.
    • After accessing Recovery, press the Volume Down button to select Wipe data / factory reset. After selecting it, confirm the action by pressing the screen activation key.

      This system reset option will clear the memory by bypassing Android, allowing you to fix the above bootloop. As in other methods, this action will delete all user data, so a backup is desirable.

      System Tools

      Samsung has provided users with the option to reset the device (in English hard reset) through the device settings.

        Enter “Settings” in any available way (via the shortcut of the menu application or by pressing the corresponding button in the curtain of the device).

      In the group “General settings” there is an item “Archive and reset”. Enter this item with a single tap.

      The application will warn you about the deletion of all user information stored in memory (including accounts). At the bottom of the list is the “Reset device” button, which you need to click.

    • You will be presented with another warning and a button “Delete all”. After clicking, the process of clearing the user’s personal data stored on the device will begin. If you are using a photographic password, PIN or fingerprint sensor, or iris, you will need to unlock the option first.
    • At the end of the process, the phone will reboot and appear in front of you in a pristine state.
    • Despite the simplicity, this method has a significant drawback. In order to use it, the phone must be loaded into the system.

      How to reset Samsung to factory settings

      This seemingly difficult task can be solved in several ways. Let’s consider each of them in order of complexity of both execution and problem.

      Factory reset Samsung smartphones

      Service code in the dialer

      This cleaning method is possible using the Samsung Service Tag. Works only on some devices, and it also affects the contents of memory cards, so we recommend removing the USB flash drive from your phone before use.

        Open your device’s dialer app (preferably standard, but most third-party apps work as well).

      Enter the following code in it

      27673855 # The device will immediately start the reset process and reboot when finished.

      The method is extremely simple, but fraught with danger, since no warning or confirmation of the reset is provided.

      Summing up, we note that the process of factory resetting Samsung phones is not much different from other smartphones on Android. In addition to those described above, there are more exotic reset methods, but most ordinary users do not need them.

      TURBION.NET 2021