How to remove the back cover of Xiaomi redmi 5

Phone cases from the Xiaomi brand are most often made of aluminum with plastic inserts. The company installs high-quality parts, so, as a rule, there are no problems with parsing. parts can be easily removed.

Before starting parsing, be sure to turn off your phone and wait a few minutes until all processes stop.

How to remove back panel Xiaomi Redmi 5 Plus and Redmi note 5

  • Use a paperclip to remove the SIM card slot.
  • Next, you need to remove the fasteners connecting the two parts of the smartphone. the case and the screen. To do this, pry the cover with a spatula or a plastic card in the place of the micro USB connector and slide it around the entire perimeter of the phone.
  • Use the same cards, nails or other means at hand (but first make sure that they do not scratch the device) hold the lid so that it does not slam shut.
  • Be extremely careful, as on the Xiaomi Redmi 5 Plus and Xiaomi Redmi 4x models, there are fingerprint scanners on the back, which are connected to the sensor via a cable through the back cover.
  • You can detach the fingerprint scanner connectors.
  • Now you have a battery attached to the case with adhesive layers and a motherboard that is held on by bolts.
  • To remove the battery, you must first pull off the adhesive layers on the sides, and to remove the board, you need to unscrew the screws. Fold all the bolts separately and in a conspicuous place so as not to be confused with each other and not to lose.

Xiaomi phones are deservedly getting good reviews. In the production of any original Xiaomi phone, reliable components are used, which guarantees high quality products. But any equipment eventually breaks down and needs repair. Therefore, it may be necessary to disassemble telephone sets. Of course, it is ideal that disassembly and subsequent repairs are carried out by specialists. This guarantees the quality of work and will allow you to have no doubts about the final result. But if you want to save on paying for their services, then you can learn how to remove the back cover on your Xiaomi Redmi phone or another model.

We offer you a short guide on how to open the back cover on Xiaomi Redmi phones (including models 3 and 4), Mi Max, etc. Since almost all phones are of the same design, this guide can be used for most mobile gadgets.

Redmi 5 plus how to remove the back cover

The desire to remove the smartphone cover arises for various reasons. You may need to replace one of the parts of the phone (battery, display, etc.), restore the device after a breakdown or unsuccessful flashing, or simply check the insides. Unfortunately, smartphones in 2019 are no longer what they used to be with a removable cover that you simply unfasten and get access to the mechanism. Now you need to carry out a complete disassembly of the phone. How to do it on Xiaomi Redmi 5 Plus and Xiaomi Redmi 4x. we will discuss in this article.

Sequencing

To get a more accurate idea of ​​how to properly open the Mi Max phone and other models from Xiaomi, we suggest that you familiarize yourself with the training videos.

Most modern Xiaomi phones have a case without a removable cover. Therefore, in order to gain access to the battery and other contents of the gadget, you will have to disassemble it. If you do not know how to remove the back cover on Xiaomi Redmi 5 Plus, the following step-by-step instruction will help you.

In what situations might it be necessary to remove the cover? When you need to replace the battery on Xiaomi Redmi 5 Plus, or make a testpoint to resurrect the phone after an unsuccessful firmware. Or, for example, to replace the screen in the future.

How to remove the back cover?

1) First of all, turn off the phone. This is done to avoid glitches and malfunctions of the device.

2) We take out the slot for SIM cards. It interferes with the removal of the cover and can deform the chips.

It is advisable to use special tools during the work, such as a thin mediator or a plastic spatula. Alternative options: plastic card or nails.

It is best to buy a special kit for disassembling smartphones that are used in service centers. Such sets can be found in online stores or retail outlets with mobile phones on the market.

The process requires you to be careful and focused. The cover itself is fastened with plastic latches over the entire area of ​​\u200b\u200bthe case, which must be carefully pry off with a tool.

If you need to remove the back cover on Xiaomi Redmi 5 Plus, but you are afraid of damaging the phone, then it is better to contact any Xiaomi ASC (authorized service center) with this task. Specialists will help to solve this problem for a fixed fee indicated in the price list and no hidden fees.

You can cope with the task on your own. The main thing is not to be afraid, be careful, and follow the instructions to disassemble the phone case and remove the back cover on Redmi 5 Plus.

We start from the corner of the bottom end of the case, where the micro-USB port and speaker grille are located. Prying the latches on all sides, you will find that a gap has formed between the cover. It remains only to carefully remove the back cover from the phone.

4) In Xiaomi Redmi series phones, there is a fingerprint scanner on the back panel. Inside, the scanner sensor is connected to the board with contacts. In order not to damage anything, you need to carefully disconnect the contacts.

By following these simple steps, you will remove the back cover on Xiaomi Redmi 5 Plus and get access to the internal stuffing of the phone.

Hello dear friends! My name is Mikhail Xiaominko, I am a fan of Xiaomi technology, gadgets and smartphones. Having access to information, I try to provide interesting and high-quality content for Xiaomi readers. Sharing the latest news and exclusive content.

What causes the touch monitor to “fail”?

Many users have encountered a similar situation: in the absence of visible damage on the body of Xiaomi Redmi 5 Plus, the touch screen freezes. So the device may react to the installation of a dubious program. In this case, there is no need to change the display. It is enough to uninstall the program and, having rebooted the device, observe its work for 2-3 days.

If the phone continues to “slow down”, you can try to reset the settings to the factory settings. If the system does not work normally, the only way to save the phone is to take it to the nearest service center.

The touch display may “freeze” for the following reasons:

  • mechanical shocks (for example, during a trip in transport);
  • phone falling from a great height;
  • moisture ingress into the device;
  • breakdown of the monitor microsystem;
  • failure of individual parts;
  • manufacturing defects;
  • use of defective spare parts during a previous repair.

If even a slight damage to the screen resulted from the listed reasons, it is impossible to do without replacing the latter. Even if the phone works somehow, moisture and dust from the environment will inevitably get inside the case, causing damage to other parts.

Display Replacement

It is better to entrust the replacement of the Xiaomi 5 Plus display to an experienced craftsman who knows the sequence in which to disassemble / assemble the device and how to act so as not to damage other important parts of the phone.

If for some reason the user did not contact the service center, but wants to replace the touch monitor with his own hands, he will have to stock up on a specialized tool and follow the video or text instructions.

Preparatory work

Disassembly and assembly of “smart” phones is done using a paperclip key (used to remove the SIM card), a spatula, a plastic tool for working with the internal parts of the phone, tweezers and a screwdriver. Protective hand gloves and a specialized adhesive complete the kit.

In addition to the above, in the arsenal of the master should be a 6-inch capacitive touch monitor that works on multi-touch technology (multi-touch) IPS, with a resolution of 21601080 pixels and a pixel density of 403 ppi.

Before proceeding with the replacement of the Xiaomi Redmi 5 Plus touch display, the repairman takes the following steps:

  • turns off the device;
  • using a paperclip key, removes slots for SIM cards and memory cards from the case;
  • armed with a special spatula and holding the phone with his free hand, he opens the latches on which the back wall is attached (located along the perimeter of the phone). Slowly and carefully, so as not to break the latches and not damage the body, moves the blade between the wings;
  • opening all the latches, removes the back cover.

By separating the back cover, you can completely disconnect it from the device, since the fingerprint sensor cable is not paired with this part of Xiaomi Redmi 5 Plus.

At the next stage, the specialist opens access to the display. As you get closer to the inside of the screen, parts such as the speaker, antenna, scanner module, bottom board, along with the protective plate, and the battery are temporarily removed from the device. After removing the battery, the specialist with the help of tweezers moves the display cable fixed on the inner surface of the device.

A user who decides to repair the phone himself must act carefully, but at the same time use force.

User information

To remove the protective plate, it is necessary to unscrew 4 bolts using a screwdriver.

Removal of the scanning device is done using a special plastic tool, and a spatula is required to remove the battery.

The accumulator (battery) is fixed in the body of the device with the help of two tape-like Velcro. Before pulling it out of the Xiaomi case, you need to remove these fasteners using a spatula and tweezers.

You should not disassemble your Redmi without specialized tools. All Xiaomi devices, despite the relatively low cost, consist of very sensitive parts that fail at the touch of a hand.

Removing the old display

If the screen is not scratched or damaged, a thick film or special glass is glued onto it and only then removed from the case using a spatula. The damaged touchscreen is removed from the outside. If necessary, the junctions of the sensor with the frame of the phone are slightly warmed up to weaken the effect of the adhesive, with which the touch display is attached to the body.

See also  Internet not working on Xiaomi

Important! The spatula, firmly held in the hand, slowly moves around the perimeter, millimeter by millimeter separating the sensor from the frame. It is not recommended to remove the touchscreen before it is completely separated from the case. Even if one edge is already open, you should not rip off the glass in one jerk.

Under the touchscreen is the inner surface of the display. It must be degreased and, if the touch screen of the phone has been damaged, try to remove the fragments. A fragment left inside the device will look like a white opaque spot when the backlight is turned on.

Installing a new display

The specialist will not install a new touchscreen without making sure that it is working. Checking the ability of the sensor to respond to touch is carried out before gluing into the housing. To the battery installed in its original place, the display cable is connected.

If the latter is working, the phone will turn on and you can perform all kinds of actions with it. touch to activate the icons, swap them, open and close applications, and so on.

Some repairmen who do not trust the Chinese manufacturer start installing the display by gluing the backlight module (located at the top of the device) with a special adhesive strip so as not to accidentally damage this important element.

The final stage

Putting protective gloves on his hands, the master applies a thin layer of glue to the front frame of the phone. Once the glue is dry, carefully stick the new display to the front of the case.

How to replace the Xiaomi Redmi 5 Plus display: tips from a repairman

The main detail of Xiaomi Redmi 5 Plus, like most modern phones, is a touchscreen that functions as a monitor and keyboard at the same time. The failure of this part of the device makes the device unusable. In most cases, replacing the Xiaomi Redmi 5 Plus display is the only way to restore the device to working order.

What to look out for

If you overdo it with the adhesive, it will spread outside the frame of the phone. In order not to make a mistake with the dosage, it is better not to be lazy and read the instructions for using the glue.

Xiaomi is assembled in exactly the same way as disassembly, only in reverse order. In order not to accidentally forget to insert any part into place, the repairman fixes each of his actions performed during the disassembly of the device.

If the owner of the device is not sure that he can handle the replacement of the display on his own, it’s not worth the risk. It is better to entrust the repair of a damaged device to a specialist or purchase another, less delicate phone.

In any case, the most common code for checking battery information on Android devices is # # # Enter the code into your phone’s dialer and select the Battery Information menu to see the battery status. If there is no problem with the battery, it will show the battery status as good.

Dampen some alcohol with a paper towel or soft cleaning cloth and place the wet area of ​​the paper or cloth over the tacky spot. Wait a few minutes for the stain to soak in. Remove soaked sticky residue with your fingers or use a plastic scraper. The rest should come off easily.

Be sure to heat the edges, not the middle of the device. Place the suction cup on the rear window, then lift up by prying up the side seam with a pick. Run a pick along the seam to separate the back cover from the frame until it can be completely removed.

Content creation, distribution and management specialist.

  • Use the key tool to open the SIM card tray and remove it.
  • Open the back cover.
  • Screwdriver (Phillips 1.5 mm PH000) unscrew 9 bolts.
  • Remove the top protective cover.
  • Screwdriver (Phillips 1.5 mm PH000) unscrew 5 bolts.

Pry and remove the back cover with a pick. The back cover is covered with a layer of cooling sticker. Redmi Note 3 uses the FPC 1022 chip of the Swedish fingerprint card. Under the back cover, you can access internal components including the battery, speaker, camera, and motherboard.

Xiaomi phone batteries should only be replaced with original or original ones provided by their manufacturers only to Xiaomi and several mobile phone repair service centers in the world.

This item Black Store BN30 Battery for Xiaomi Mi for 4A Black Store Orignal BN30 Battery for Xiaomi Redmi 4A (3120 mAh) with 3 months warranty
Customer Rating 4.5 out of 5 stars (2) 3.9 out of 5 stars (8)
Price ₹ 1,199.00 ₹ 1,189.00
sold Selitz Lynacz
Model number BN30 BN30

Power and speed in an ultra-light package

The new Redmi 4A is better, faster and probably your best companion for both work and play. It is powered by a 64-bit Snapdragon 425 quad-core processor and a massive 3120mAh(typ) / 3030mAh(min) battery to ensure you run smoother throughout the day.

How to open the cover of Xiaomi Redmi 5

Xiaomi Redmi 5 series smartphones combine high performance, functionality, excellent design and affordable price. That is why they have become an absolute bestseller in the Russian market. Today our instruction is dedicated to this device.

You need to remove the cover on Xiaomi Redmi 5 to repair the device or replace the battery. Previously, manufacturers made a case that was easy to open on their own. Today, the Xiaomi back cover is fastened to the frame so securely that it becomes difficult to remove it with your own hands. However, we will tell you how to open the cover of Xiaomi Redmi 5 without resorting to the help of service center specialists.

To work, you will need a thin plastic spatula or spatula, as well as a plectrum, with which you will open the case. The mediator can be replaced with an ordinary bank card, preferably made of thick plastic. We do not recommend using metal objects, as they can damage the back cover and other elements of the case.

Turn off the power of the smartphone and remove the SIM card connector using the paperclip that came with the device.

Rotate your phone so that the back cover is on top.

Using a putty knife, pry off the back cover at the bottom of the case where the speakers and charger connector are located. Do not overdo it so as not to break the internal fasteners.

How to open Xiaomi Redmi Note 5 Back Panel || Xiaomi Redmi Note 5 back cover Disassembly

When the case opens at the bottom, grab a pick or a plastic card to open all the internal latches. Move from corners around the perimeter of the device.

When all the latches are open, you can open the cover of Xiaomi Redmi 5. Just don’t forget about the fingerprint scanner cable! Careless or abrupt movement will cause the cable to be damaged. Carefully disconnect the cable, after which the back cover of the phone is removed completely.

Now you know how to open the cover of Xiaomi Redmi 5. And here you will find detailed instructions for disassembling Xiaomi Redmi 4X.

How to open the lid on Xiaomi?

Xiaomi equips its smartphones with non-removable batteries, and SIM cards are placed in a separate tray located on the left or right side of the device. For these reasons, the engineers decided to limit access to the internal elements of the products, believing that users would not replace the battery themselves or carry out minor repairs to the gadget.

However, in some cases, it becomes necessary to open the Xiaomi cover, for example, to clean the device or replace any module or smartphone glass.

Xiaomi back cover opening tools

Most smartphone models that use a removable battery can be easily opened with a sharp object, because you just need to pick up the edge of the cover and slightly snap it off. When you try to repeat such actions on Xiaomi brand phones, there is a high probability of damage to the case and scratches on it.

We recommend using the following tools to get the job done:

    A special spatula, which is designed for parsing gadgets;

Instructions on how to open the Xiaomi phone cover

The procedure is not complicated, the main thing is to do everything carefully and not to rush.

Actions are performed in a certain sequence:

  • We turn off the smartphone and wait 2-3 minutes, which are required to complete the process systems;
  • We remove the SIM cards, and it is recommended to stick a protective film on the screen;
  • The blade is placed in the lower corner of the body, which gently snaps off, gradually moving along the entire perimeter;
  • When all the latches are open, you must carefully lift the cover, otherwise you can easily damage the fingerprint scanner tape (for those smartphones where this option is provided);

How to remove the battery on Xiaomi?

After opening the Xiaomi cover, you can start replacing the battery. However, you first need to remove the protective panel, which is fixed with bolts.

Next, the battery cable is disconnected, for which tweezers are used.

To remove the battery, it is recommended to heat it up a little, which can be done with a regular hair dryer. After removing it, you can insert a new battery, for which its connector is first latched, and then it is placed in its place.

The protective panel is fixed, and then the Xiaomi back cover is carefully latched.

All these actions can, of course, be performed independently, but the safest option would be to contact a service center. Otherwise, the probability of damage to the mobile device or complete failure increases dramatically.

How to open the Xiaomi Redmi 5 phone cover

In this article, I want to show in detail and clearly how to remove the cover on the Xiaomi Redmi 5, 5A, 5S and 5X phone. Why? For example, to change the smartphone battery yourself. Previously, it was not difficult and everything could be done independently. Now, on modern thin devices, this has become much more difficult to do. And still, if you are at least a day more accurate, then you can do everything yourself! The instruction will also be relevant for those who want to open the cover on Xiaomi Redmi 4, 4S and 4X.

For this simple process, we need a strong thin plastic spatula or spatula. It is also desirable to have a mediator on hand or at least a plastic card (credit card, discount, etc.) It is undesirable to use metal tools, as they can damage the device.

Attention! Before opening the smartphone, be sure to remove the SIM card tray from it using the supplied key. Otherwise, she will not let you disassemble the phone.

To open the cover of Xiaomi Redmi 5, we take it in our hands and turn it towards us with the end side, on which the charging connector and speakers are located.

We try to carefully separate the phone case with a spatula so that a gap forms. It is best to do this from the corners, since it is easiest to pick up the case cover there.

After you managed to make a gap, you need to increase it along the rest of the case, carefully disconnecting the latches along its edges with a pick or a plastic card. As soon as you manage to detach most of the latches, you can open the cover of Xiaomi Redmi 5, but you need to do this carefully. The fact is that on the back of the smartphone is a fingerprint scanner. If you pull the cover hard, you will tear off the cable that goes to the scanner.

See also  Sony Xperia does not charge and does not turn on

Therefore, you must carefully unhook the cable from the device. Only after that you can remove the cover of the phone completely and then change the battery, repair, or perform other operations with the device.

Actions

It is necessary to open exactly along the perimeter, and not from different angles and sides, otherwise you can break half of the latches, and then the lid will not hold.

  • We very carefully lift the lid, and we see the cable that needs to be disconnected. If there is no cable, then just remove the cover. The main thing is not to make sudden movements so as not to damage the inside of the phone.

If the lid does not open and nothing works for you, it is better to stop further actions.

How to open Xiaomi phone

Xiaomi is a well-known brand. They make quite high-quality smartphones, and in addition to the proprietary MIUI shell, they are famous for their excellent assembly. But sometimes there are moments when you need to disassemble a smartphone, and instead of taking your device to a workshop or service center, the user starts trying to disassemble it himself. This article will be about this.

The thing is that Xiaomi smartphones are non-separable, that is, you can’t simply remove the back cover and see a battery with slots for SIM cards and a flash drive there. To open the cover of Xiaomi Redmi 4, 4a, 4x, you need to try hard and make a lot of effort.

Attention! This article is written for informational purposes only and is not a call to action. You perform all manipulations at your own peril and risk, so the site administration is not responsible for your actions.

So, to remove the cover on mi4 or 3s, you will need a special tool. There is a small metal spatula with which craftsmen dismantle telephones. If you don’t have one, then you need at least a guitar pick, or, in extreme cases, a plastic card.

This manual applies to models 5 plus, Mi a1, note 3, laptop version, pro, etc.

During the execution of such work, nothing should interfere with you (i.e. there should be a working space and there were no extra things). In addition to all this, you can not use sharp objects. Some users open the lid with a knife, which is strictly prohibited. You can damage the screen, battery, board, case, break the latch and much more. If you do not have a special tool, it is better not to start disassembly.

As you can see, opening a Xiaomi phone is quite easy. All you need is a little perseverance, patience and caution. Always follow the instructions, and then you will succeed.

What to do next

Having disassembled Xiaomi Redmi in this way, the “stuffing” of the smartphone will be visible. You can see the top panel, under it there is a processor, a camera and some other components of the device, the panel itself serves as an antenna for Bluetooth and Wi-Fi modules, in the lower part there is another protective screen, it also serves as an antenna for cellular networks, under it. the main speaker of the smartphone. The central part of the “insides” is occupied by the battery of the gadget.

Most often, the back cover is removed to replace the battery or camera. This may be required if the touchscreen is damaged, but it will not be possible to do without complex equipment, so this type of repair work should not be performed at home.

How to disassemble Xiaomi Redmi 5a

Xiaomi phones deservedly enjoy wide popularity, as they have good functionality and are able to serve their owners for a long time. In their production, only high-quality components are used. But over time, even reliable equipment breaks down and needs to be repaired.

The best option is when specialists are involved in its implementation. then you can be sure that the technical condition of the gadget will be returned to a high level. But it happens that users try to do some repair work on their own, for example, to replace the battery of the device, and it is quite possible to cope with this on their own. How exactly. we will consider further on the example of Xiaomi Redmi 5A.

Removing the battery

After the start of disassembly, when the back panel of the phone has already been removed, you can start replacing its battery, for this we will first disassemble its fasteners:

  • a suitable screwdriver removes the screws from the metal bracket that holds the cable connectors;
  • using tweezers, the bracket is removed, while it is important not to touch the contacts so as not to close them;
  • disconnect the battery power cable;
  • unscrew the frame screws of the lower module and remove it;
  • peel off and bend back the black labels located on the bottom of the battery;
  • pull out the adhesive tape under the battery with their help;
  • unhook the battery itself and remove it from the seat.

Having bought a new battery, it is “sit down” on adhesive tape in the smartphone case, then everything is assembled, as was the disassembly, but in the reverse order, while making sure not to leave or confuse any screws.

The battery is held in place by an adhesive backing with two labels.

Removing the back cover

The beginning of any repair work is the opening of the back cover of the device. In this case, you should adhere to a strict sequence of actions, it is suitable for Xiaomi Redmi 5A, modification 5 Note or Prime, as well as many other models.

The case is disassembled in the following way:

  • We start by removing the latches located under the cover around the perimeter of the smartphone. To do this, you should make a lot of effort, but do not overdo it so as not to cause any damage.
  • The best option is to use a special spatula or some other thin plastic object for this, but in no case a knife or a screwdriver. scratches appear on the phone cover from them.
  • It is recommended to start opening from the lower left corner of the phone, gradually moving towards the center, then the rest of the parts in exactly the same way.
  • When the latches give in, slowly and carefully remove the detached cover.

It is best to start detaching the latches from the corners

Camera Replacement

If there is a need to replace the main camera of Redmi 5A, first of all, the upper protective screen is removed by unscrewing the screws that secure it to the case, there are 8 of them. After that, pry off the screen with tweezers and remove it, thus the main motherboard will be opened. To remove it, you first need to disable the loops:

Then it remains to turn off only the coaxial line responsible for transmitting the GSM signal. the board can be removed, this is done with ordinary tweezers. To replace the camera, it remains only to disconnect its cable and remove the module. The new one is installed by performing the reverse sequence of actions.

This is how the cables look on the main board

If it is necessary to replace the additional camera module, the steps are exactly the same, with the only difference that it is located on the back of the motherboard.

Thus, you can remove the cover from the Xiaomi Redmi 5A smartphone and replace some components on your own, with some experience and skills, as well as have special tools. We briefly reviewed how to do it, so you can cope with the task yourself, acting at your own peril and risk, but it is still recommended to trust specialists to carry out all repairs.

How to remove the back cover on Xiaomi Redmi 5 plus and 4x

The desire to remove the smartphone cover arises for various reasons. You may need to replace one of the parts of the phone (battery, display, etc.), restore the device after a breakdown or unsuccessful flashing, or a simple check of the “insides”. Unfortunately, smartphones in 2019 are no longer what they used to be with a removable cover that you simply unfasten and get access to the mechanism. Now you need to carry out a complete disassembly of the phone. How to do it on Xiaomi Redmi 5 Plus and Xiaomi Redmi 4x. we will discuss in this article.

Phone cases from the Xiaomi brand are most often made of aluminum with plastic inserts. The company installs high-quality parts, so, as a rule, there are no problems with parsing. parts can be easily removed.

Before starting parsing, be sure to turn off your phone and wait a few minutes until all processes stop.

  • Use a paperclip to remove the SIM card slot.
  • Next, you need to remove the fasteners connecting the two parts of the smartphone. the case and the screen. To do this, pry the cover with a spatula or a plastic card in the place of the micro USB connector and slide it around the entire perimeter of the phone.
  • Use the same cards, nails or other means at hand (but first make sure that they do not scratch the device) hold the lid so that it does not slam shut.
  • Be extremely careful, as on the Xiaomi Redmi 5 Plus and Xiaomi Redmi 4x models, there are fingerprint scanners on the back, which are connected to the sensor via a cable through the back cover.
  • You can detach the fingerprint scanner connectors.
  • Now you have a battery attached to the case with adhesive layers and a motherboard that is held on by bolts.
  • To remove the battery, you must first pull off the adhesive layers on the sides, and to remove the board, you need to unscrew the screws. Fold all the bolts separately and in a conspicuous place so as not to be confused with each other and not to lose.

How to remove the back cover on Xiaomi Redmi?

Most modern Xiaomi phones have a case without a removable cover. Therefore, in order to gain access to the battery and other contents of the gadget, you will have to disassemble it. If you do not know how to remove the back cover on Xiaomi Redmi 5 Plus, the following step-by-step instruction will help you.

In what situations might it be necessary to remove the cover? When you need to replace the battery on Xiaomi Redmi 5 Plus, or make a “testpoint” to resurrect the phone after an unsuccessful firmware. Or, for example, to replace the screen in the future.

How to remove the back cover?

1) First of all, turn off the phone. This is done to avoid glitches and malfunctions of the device.

2) We take out the slot for SIM cards. It interferes with the removal of the cover and can deform the chips.

It is advisable to use special tools during the work, such as a thin mediator or a plastic spatula. Alternative options: plastic card or nails.

It is best to buy a special kit for disassembling smartphones that are used in service centers. Such sets can be found in online stores or retail outlets with mobile phones on the market.

The process requires you to be careful and focused. The cover itself is fastened with plastic latches over the entire area of ​​\u200b\u200bthe case, which must be carefully pry off with a tool.

If you need to remove the back cover on Xiaomi Redmi 5 Plus, but you are afraid of damaging the phone, then it is better to contact any Xiaomi ASC (authorized service center) with this task. Specialists will help to solve this problem for a fixed fee indicated in the price list and no hidden fees.

See also  Confirming the Google account after a Samsung reset

You can cope with the task on your own. The main thing is not to be afraid, be careful, and follow the instructions to disassemble the phone case and remove the back cover on Redmi 5 Plus.

We start from the corner of the bottom end of the case, where the micro-USB port and speaker grille are located. Prying the latches on all sides, you will find that a gap has formed between the cover. It remains only to carefully remove the back cover from the phone.

4) In Xiaomi Redmi series phones, there is a fingerprint scanner on the back panel. Inside, the scanner sensor is connected to the board with contacts. In order not to damage anything, you need to carefully disconnect the contacts.

By following these simple steps, you will remove the back cover on Xiaomi Redmi 5 Plus and get access to the “internal stuffing” of the phone.

Hello dear friends! My name is Mikhail Xiaominko, I am a fan of Xiaomi technology, gadgets and smartphones. Having access to information, I try to provide interesting and high-quality content for Xiaomi readers. Sharing the latest news and exclusive content.

How to remove the back cover on Xiaomi Redmi?

Almost all current Xiaomi smartphones assume a monolithic design, therefore, for any manipulations with the equipment, it is necessary to disassemble the case. If you need to know how to properly remove the back cover on the Redmi 5 Plus model, you are invited to follow the suggested video instructions.

Under what circumstances does the need for access to components arise? In particular, to carry out repair procedures or get the built-in battery, as well as to satisfy the curiosity of the owners. Additionally, professional craftsmen will replace the display.

How to remove the back cover?

The whole procedure is divided into several stages, the observance of which will allow you to correctly navigate:

  • First of all, completely turn off the smartphone to prevent any failures and malfunctions of the device;
  • Remove the SIM tray, otherwise it is difficult to remove the cover without unforeseen breakage;
  • Start dismantling the hull.

During the procedure, xiaomium.ru recommends using only specialized devices or plastic tools, while the latter can include a standard card. It is most preferable to purchase tools for working with mobile devices that are used in workshops, and such add-ons can be bought both through the Internet and local retail stores. Manipulations should be carried out carefully and concentratedly, since the back panel is fixed by means of latches located around the perimeter of the structure, which must be pry and unfasten for further tasks.

If you need to remove the cover on the Redmi 5 Plus smartphone and there is no knowledge about the procedure, it is advisable to seek help from the official service center of the Xiaomi manufacturer, since professionals will be able to solve the problem on their own for a specific amount indicated in the list of services. All instructions can be implemented by hand, however, it is necessary to keep STIHL and care not to violate the principle of operation for disassembling the smartphone structure.

It should be noted that the use of metal sharp objects is not recommended, as deformation and damage can be caused. Start the first action from the edge of the bottom end, near which there is a connector for charging and speakers. Once the back cover is detached and a small gap is formed, the case can be easily opened.

The Redmi line of the Chinese manufacturer has a fingerprint scanner on the back surface, which is fixed with a cable in the inside, so it is imperative to first remove the contacts before removing the panel. Otherwise, a sharp removal of the reverse side with a fingerprint sensor may be accompanied by a breakdown.

Upon completion of all manipulations, access to the technical equipment of the smartphone is opened for further actions or visual inspection, while it is advisable to familiarize yourself with the practice from the videos that can be found in the public domain.

Opening procedure

If the touch screen of a smartphone is damaged, additional sophisticated equipment is needed to replace it. It is not recommended to perform this operation at home.

To disassemble the plastic case, you will need tools with the following characteristics:

  • Reliability. They have to bear the load.
  • Smooth contours and smoothness of the surface. Sharp edges may scratch the surface of the smartphone during assembly and disassembly.

To open the Xiaomi cover, you will need a phone repair spatula. Its functions at home can be performed by a plastic guitar pick or a bank card.

To remove the old battery and install a new one, you need:

  • Disassembly must be carried out on a flat and clean surface. A table, bedside table or wide window sill is suitable for this process.
  • Removable parts are placed in the order of their dismantling. This will help with reassembly.
  • Before work, you must wash your hands or use thin special gloves.
  • Good lighting and ventilation is provided in the room.
  • Security measures are followed.

How to remove the battery and replace it

You proceed to this procedure after you managed to remove the back cover of the phone.

  • Unscrew 3 screws that secure the bracket (for cable).
  • It is recommended to remove it from the board with tweezers or fingers, prying with a screwdriver.
  • Disconnecting the power cable from the battery.
  • You need to remove the lower module. To do this, 8 screws are unscrewed, and it is carefully removed from the socket. This will provide free access to the battery.
  • 2 black tabs peel off from its bottom, holding adhesive tape for connection to the case.
  • Tape is carefully pulled out.
  • Use tweezers or a spatula to pick up the battery and remove it from the socket.
  • Before installation, check the markings of the old and new batteries. They must match.
  • A strip of adhesive tape is glued to the bottom surface, the protective layer of paper is removed from it.
  • The battery is inserted into the socket.

Assembling the Redmi 4 phone is carried out in the reverse order:

  • Lower module insert.
  • Fixing it with 8 screws.
  • Connecting the power cable to a new battery.
  • Screwing the bracket with 3 screws.
  • The back cover closes. This must be done carefully, smoothly snapping fasteners around the perimeter.

Security measures

When carrying out all work related to the disassembly of electrical devices and their repair, a number of rules and recommendations are observed:

  • Requirements for the place of work: sufficient illumination, ventilated room with low humidity.
  • Before starting work, read the operating instructions for the device. If it contains a description of the procedure, you must strictly adhere to it.
  • The smartphone must be without a headset and disconnected from external power sources (from the charger). Power key in the off position.
  • The battery must not be deformed, disassembled, allowed to come into contact with food or liquids.
  • The old battery must be properly disposed of. It must be thrown into special bins with the sign “For waste batteries and batteries” or handed over to a household appliances recycling center.
  • When disassembling the device, fold the removed parts in order: cover, bracket fastening screws, bracket, etc. This will help when assembling a smartphone.

Recommendations for different models

The difference in the order of actions is small, but the nuances exist.

  • After separating the cover from the body, it should be removed carefully, a fingerprint sensor is attached to it.
  • The sensor cable must be disconnected. You can use a screwdriver for this.

How to Open Redmi 5 Back Panel With NAILS || Xiaomi Redmi 5 Back Panel Disassembly

This procedure is required for the following Xiaomi models:

If the device is under warranty, the user is responsible for disassembly. Therefore, if there is a problem with the phone, it is better to solve it in a service center. If self-tampering is found, the warranty will be void.

Before you open your Xiaomi phone, you need to prepare all the tools in advance and equip the workplace. The latches and contacts of the device are very small, and if you do everything hastily and “on your knee”, you can irreparably damage the smartphone.

The table on which you will disassemble should be clean, with good lighting and a non-slip surface so that the screws and other parts do not roll off it (you can cover it with a cloth or paper towels).

In order to remove the back cover, you should prepare:

  • Necessary spare parts (battery, new back cover or other parts). Do not leave your smartphone disassembled for a long time: its contacts can oxidize or become covered with dust, and there is also a risk of losing screws.
  • A container with compartments in which you will store spare parts. The upper bolts of Xiaomi smartphones are slightly longer than the lower ones, it is important not to confuse them during assembly.
  • Mobile phone screwdriver set.
  • A special spatula for disassembly (you can take a plastic card or a guitar pick instead). Metal tools should not be used. you can scratch or bend the case.
  • Tweezers with fine tips.
  • To replace the screen or battery, you will additionally need a hair dryer.

Xiaomi Redmi disassembly tool and screwdriver kits can be purchased inexpensively on AliExpress.

How to remove the cover from a Xiaomi phone: step by step instructions

Before disassembling the device, turn off the device and remove the SIM and memory card tray from the device.

How to open the cover of Xiaomi Redmi 2021 and earlier:

  • Wait 1-2 minutes after turning off the phone. this is important to make sure that all processes running on it have stopped.
  • Using a spatula or thin plastic object, carefully pry out all the latches around the perimeter of the cover/display connection.
  • Carefully open the device, taking care not to damage the thin cables. You can use a special suction cup with a handle for this.
  • Using tweezers, disconnect the fingerprint scanner cable (you may additionally need to open the small plastic latches at the base of the contact).
  • Remove the cover. Job completed.

Even if you understand well how to remove the cover from a Xiaomi phone, disassemble it carefully, without making hasty actions and sudden movements.

To replace the battery, unscrew the bolts and remove all the elements that block access to it. Next, gently pry the battery with a plastic spatula and remove it. If the battery won’t come off, warm it up a bit with a hair dryer to loosen the adhesive. After that, install a new battery in the same place, securing it with adhesive tapes that came with the device and assemble the phone. Before snapping the cover on, turn on the gadget and check the battery performance.

Changing the display, speaker, camera module or other parts is done in the same way: carefully remove all interfering elements, install a new spare part and assemble the device.

Redmi battery replacement

Assemble the Xiaomi Redmi 4 phone in the reverse order of how you opened it. A small click will indicate that the removed (or new) cover has exactly fallen into place. You should not use force when installing the panel: you can damage the phone. If the case does not close, take a close look at what you might have done wrong.

In order not to confuse the stages of assembling the device, it is recommended to lay out its parts on the table in the same order as they were removed.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE