How to reboot your laptop in safe mode

How to disable safe mode on a laptop

Safe mode for the Windows system is an algorithm for starting a session with minimal parameters and almost no programs. The wallpaper will not be displayed on the desktop, the startup application will not start and your work becomes if not impossible, then difficult. If the secure startup algorithm has been randomly enabled without the need to use it, such restrictions will greatly affect your work at your laptop.

The Windows operating system, when starting the computer, may display a menu that offers additional boot options. Before starting the OS, a similar window opens on the screen in different versions of Windows.

  • Immediately after starting the PC you need to press the “F8” key several times, and on many laptops you need to press the “F8” key simultaneously “Fn”.
  • On the “Advanced Boot Options” window, use the keyboard arrows “” and “” to navigate to “Normal Windows Boot”.
  • Press Enter.

Select boot mode

A universal method for any version of Windows

The easiest way to enter safe mode is to use the good old msconfig. This trick works absolutely in any version of Windows and most likely you have known for a long time.

  • Press WinR to open Run (you can go to StartUpdate instead)
  • Type msconfig in the line and in the window that will open, on the Load tab put a tick next to the Safe Mode line
  • Select advanced options (Minimal. only the bare necessities of the system will be loaded, Networking. safe mode with network support)
  • Click the Apply button, and then OK. The system will ask you to reboot. accept the restart.
See also  How to turn off the touchpad on the Sony Wio laptop

If you are going to start Windows normally in the Safe Mode, follow the same path and make sure that the Safe Mode box is unchecked. If not, then remove it and reboot the system.

Safe Mode in Windows 10 when you boot your computer (special boot options)

It works like this: we start system reset with special boot options, or with “Shift” key pressed. And when you boot your computer, we will see a window with different options for restoring Windows 10. Including the option to boot in safe mode.

There are two ways to start this process:

A blue screen will appear with the words “Wait”. Then you will see different options. Select “Troubleshooting”.

Then select “Advanced options”.

Click on “Boot Options” and in the next window click on “Reboot“.

A window with different boot options will appear. We are interested in one of the three options (4, 5, 6):

Press the appropriate key from the series F1-F9, to boot the desired mode.

Windows 10 will boot in the selected mode.

Enable Advanced Boot Options menu (Windows 10, 8)

In Windows 10, 8 it is necessary to activate this menu by pressing F8 button manually.

Close the command line window, reboot your computer.

Before booting into operating system press F8 button, menu Additional boot options will appear, where we can select some variants of starting of Safe mode or other parameters of booting Windows.

If you have a laptop, you may have to press the FnF8 key combination.

How to enter Windows 11 safe mode through msconfig

MSConfig is a system utility for managing your system configuration. Use this tool to control Windows booting.

  • Enter the “Start” menu.
  • Click on “All applications”.
  • From the list of programs, select “Windows Tools.”
  • In the “Windows Tools” window, find and click on “System Configuration” to open the application.
  • In the “System Configuration” window that opens, open the “Boot” tab.
  • Under “Boot Options” select the “Safe Mode” checkbox.
  • Select the “Minimum” option to start Windows 11 in safe mode, or you can select the “Network” option to boot Windows 11 with networking support.
See also  Flashes the battery charging on the ASUS laptop

The only caveat to this option is that Windows 11 will boot in safe mode until you undo the changes. If you cannot get out of Safe Mode, see the instructions at the link below.

Article conclusions

To perform diagnostics and look for problems with Windows, the computer uses a special mode with limited functionality called Safe Mode. In safe mode, only the main components and modules of the operating system are loaded.

You can enter safe mode in Windows 7 while the operating system is running from the command line or from the System Configuration tool, or at the time of starting the computer, before booting the system by selecting additional boot options, or from the Windows RE recovery environment.

How to enter safe mode in Windows 8.1 (Windows 8). 2 way

A second option to enable Safe Mode is to run a command from the Windows command line. This can be done from the operating system running in normal mode.

You will need to perform the following actions:

The operating system will enter safe mode in Windows 8.1.

You can run two more Safe Mode programs from the command line, if necessary.

Safe mode with network driver support in the GUI is started with the command:

The command line-enabled safe mode will start after running two consecutive commands:

You can exit safe mode with a command from a command line prompt:

Use the System Configuration tool (msconfig.exe) to enable safe mode

If you can enter Windows 10, one of the easiest ways to boot into safe mode is to use the System Configuration tool. Many users know this tool by the file name: msconfig.exe.

See also  Reset BIOS password on a laptop lenovo

Enter the words “System Configuration” in the search box from the taskbar. Then click or tap the “System Configuration” shortcut. Other ways to run this tool are described here: 8 ways to run system configuration in Windows (all versions).

Selecting secure boot in the system configuration

Windows 10 tells you that you need to restart your computer for the new settings to take effect. If you still have work to do, you can select “Exit without rebooting”. If not, you can restart now and your device will automatically boot into safe mode.

Requesting system configuration to reboot

After restarting Windows 10, it goes into safe mode.

Changing the system configuration

In order not to be confused by alternative ways of starting safe mode, we recommend to use the universal method, which implies making changes to the boot through the “System Configuration” menu.

  • Invoke the Run menu by pressing WinR.
  • Type “msconfig”.
  • Go to the “Download” tab and select “Safe Mode” in the “Download Options” field.
  • Press “OK” to save your changes and restart your notebook.

The main disadvantage of this method is that you have to open “System Configuration” again and change the boot mode. In addition, Windows must be operational, so you can normally boot and make the necessary changes. Otherwise there is no problem. after rebooting start diagnostic mode Safe Mode, where you can perform the task.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE