How to Make a Phone Case Without a Case

Now in the salons of communications a large selection of covers for phones and smartphones. But when you start looking for a cover for yourself, you often encounter the problem of a small selection specifically for your model. Or it is available, but not in the same format and it has a boring, standard color. To do this, we picked up several workshops on how to make a do-it-yourself case from improvised means. After all, every owner of a smartphone wants to be unique and make it beautiful, bright and comfortable. Therefore, let’s see a few options for covers that you can make at home.

Paper case

The simplest and most budgetary case may be for you a cover made of paper. Its assembly will not take much time, it is performed in the origami technique of a simple type. This, of course, will not last a long time, but if you urgently need a cover, then this option will be great. Let’s get acquainted with the step-by-step instructions.

You will need:

Working process:

  1. Put a sheet of paper in a horizontal position, on top of it is a telephone.
  2. Now wrap the phone in paper until the end of the sheet.
  3. Wrap the lower part several times to the place where the phone is.
  4. Now, to keep the bend better, bend the triangles up, at the bottom of the cover.
  5. If you need a stronger structure, use glue to seal the bends and joints. Our paper case is ready.

paper case

Rubber Case

The phone in a case made of rubber bands will look very original. Such a cover will require time and patience from you, but the result will please you and surprise your friends, and even those you don’t know. We have prepared step-by-step instructions for iPhone 5, and for other smartphones you just need to take a different amount of rubber bands. So, let’s start doing the DIY crafts step by step.

You will need:

  • Erasers of 3 colors. 500 pcs.
  • Hook
  • Weaving machine

Working process:

  1. There should be 2 rows on the machine. The holes in the top row should look to the left, and from the bottom. to the right.
  2. We begin to put on rubber bands from the upper row of the second pin, from it we put on the cross on the 3rd lower row.
  3. Next, we put the cross on the cross from the 2nd lower row to the 3rd pin of the upper row.
  4. In the same way, do the following from the 3rd pin from above to the lower 4th. And then from the lower 3rd to the 4th upper.
  5. There should be 3 crosses like that.
  6. Pass 2 pins in the center and continue to weave 4 more such crosses. On this side you should get 4 crosses that intersect with each other.
  7. At the edges of the machine should remain 2 free pins.
  8. The next row we put gum on the upper and lower pins, standing opposite.
  9. So we put on all the pins of the past row.
  10. Turn the machine toward you vertically so that the upper pins look at you with their heads.
  11. We put on the first rubber band without crossing on one upper and one lower part.
  12. We fix the remaining gum, without crossing, one after another on the top row. In this row, we do not miss the two middle pins.
  13. We make the bottom row in the same way, connecting the rubber band on the second side, just as we started the row. It turns out that we went in a circle one row.
  14. Starting from the bottom row, we remove from each pin, using a hook, two rubber bands, which are located at the very bottom. Skip the middle pins. Thus, two rubber bands on each pin should remain on the machine.
  15. We make the next row in the same way as the 3rd, in a circle one rubber band after another. For this series we take rubber bands of a different color.
  16. Next, in a circle, remove the bottom 2 loops.
  17. We again put on the rubber bands in a circle using a different color, and then remove the lower loops.
  18. In the same way we make two more rows alternating colors. One row. this is once put on the loops, and then remove.
  19. We begin to make a hole for the screen. Turn the machine vertically, the left row of bayonets should be turned on you.
  20. We begin to work on the left row. From the 3rd pin, remove the bottom rubber band and throw on the next 4th. Thus, the last loop should spread to the 7th pin.
  21. Now we remove the remaining loop from the middle 5 pins. There should be 3 pins with elastic on each side.
  22. We knit the next row in the usual way (eraser after eraser). We do this clockwise, starting from the 3rd working pin. With five pins on one side, we are not working yet.
  23. We need to remove the lower gum, 2 loops should remain on the pins.
  24. In the same way, we need to knit another 11 rows. Do not forget to alternate colors.
  25. Next, we knit a row clockwise, now filling all the pins.
  26. Remove the lower rubber bands from the pins. But we are not removing five previously unused in this series.
  27. In a row where there are unfastened pins, we skip two workers and remove the lowest loop from the third and put on the next pin. We do this, leaving only the last 2 free.
  28. Now knit one row.
  29. Take the machine vertically and in the right row from the second working pin, remove the lower loop and put on the next bayonet.
  30. The last loop should be thrown on the 4th working pin.
  31. Now from the 3rd and 2nd we remove the lower loops.
  32. Next, put on the loop in a circle, leaving our 2 free. Then remove the bottom hinges.
  33. On the next row we put on rubber bands, using all the pins. We remove the loops in the usual way, without touching only two pins, where there are only 2 rubber bands.
  34. On the first pin, we change the upper and lower loops in places and the upper one is thrown to the next pin, connecting our design. From the next two pins, remove one bottom loop and transfer to the next pin.
  35. Next, we knit a number in the usual way.
  36. We begin to close our cover. We make a row as at the very beginning of the crosses, without missing a single pin.
  37. The next row is made with crosses between opposite pins.
  38. Next, we begin to remove the lower loops, leaving only the rubber bands from which we made eights. Each pin should have 3 loops.
  39. Now the lower loop of each pin is thrown to the next.
  40. We also do the next row.
  41. On the right side, we make a knot with an additional rubber band and remove the cover from the machine.
  42. Now spread the protruding loops and hide the bundle. Now you can use such an original case.

how to make a phone case from rubber bands

Hot glue bumper cover

With a gun and hot glue you can make a beautiful bumper case for your phone. It looks very interesting and unusual. And its originality depends only on your imagination. Such a cover can be openwork or just with a flat surface and patterns.

You will need:

  • Glue gun
  • Nail polish
  • Parchment paper
  • Scotch

Working process:

  1. Cover the phone with parchment paper so that the back and side panels of the phone are without joints. Fix the joints in the area of ​​the screen with adhesive tape.
  2. Designate the locations of the buttons, camera, and jacks.
  3. Now pass the sides of the phone with hot glue, and select the designated places along the contour.
  4. In the shape of curls, make a pattern on the back of the phone so that they connect to the side.
  5. Wait until everything is dry and paint it in the desired color with nail polish.
  6. Now you can put on a beautiful case on your phone.
  7. If you do not know what pattern to make, you can use the master class.

Ball phone case

A very simple way to make a do-it-yourself phone case is to use a regular balloon. Such a cover will not protect against shock, but will help keep your smartphone dry. Let’s see the step-by-step instructions with a photo and description of how to make a phone case from a ball.

You will need:

Working process:

  1. Inflate the ball, do not tie.
  2. On top of the ball, put your phone face up.
  3. Now pushing the phone into the ball, gradually blow it away.
  4. When there is little air left, release the ball while continuing to squeeze the phone.
  5. The ball will fit the phone and the cover is ready. You can also take a balloon with any muzzle or pattern, then your phone will become more original.

Phone Case

A cover book will require additional costs, but you yourself can choose the color and shape of such a cover. He will be able to protect your smartphone or phone from damage if it is closed. The shape of such a cover has a special charm, because the cover can have absolutely any design.

You will need:

  • Notepad-sized phone with eraser
  • Stationery knife
  • Ruler
  • Glue
  • Pencil
  • Felt
  • Narrow elastic
  • Cardboard

Working process:

  1. With a knife, cut out the notebook sheets and the side parts.
  2. Divide one side in half and outline with a pencil.
  3. Cut with a knife along the line to the extreme fiber of the cover.
  4. Now in this place it is necessary to cut off a strip with a width of about 0.5 cm, so that later it is easy to bend here.
  5. Glue carefully the inside of the cover.
  6. Outline the shape of the inside of the cover along the contour of the cover on felt.
  7. Place our felt blank on the inside of the cover and cut the felt along the side bend.
  8. Glue the felt blank to the cover.
  9. On a sheet of cardboard, outline the phone and cut it out along the line. Glue it to the felt and cut it in shape, stepping back from the cardboard to 1 cm.
  10. Cut the felt in the corners with two sections on each side so that you can bend. Glue the corners.
  11. Glue two rubber bands across this blank so that you can then fix the phone here.
  12. Glue the workpiece to the extreme bending half.
  13. Now our case is ready to use.

Cardboard Case

A cardboard cover does not require additional costs, and is made from improvised means that are in almost every home. The case will have a neat and pleasant appearance. Now let’s get started with the step-by-step tutorial.

You will need:

Working process:

  1. Draw a telephone on a cardboard twice with a gap of 0.5 cm between them.
  2. Cut along the contour.
  3. Make two bends along the lines in the center of the workpiece, the cover is almost ready.
  4. Now glue one side of the case to the back cover of the phone.
  5. To cover the cover, you can put on a thin rubber band on it, or make holes in the sides of the cover and attach a tape or rope.

Felt phone case

Such a case has a beautiful appearance, its shape resembles a pocket in which you hide your phone. To make a phone case from felt you do not need special skills, just a little imagination and the necessary materials. And you can read the step-by-step instructions in the description below.

You will need:

  • Felt of different colors
  • Scissors
  • Ruler
  • Needle
  • Thread
  • Glue gun

Working process:

  1. Put the phone on felt, and step back from the edge of the phone about 1 cm, circle the outline. We need 2 of these.
  2. Sew both blanks together with the outer seam.
  3. Now you need to make a decoration for the cover. Cut balloons from different colors in the form of drops.
  4. We also cut a felt house, windows and a door out of it.
  5. Use the glue gun to attach the house to the bottom of the cover.
  6. Now sew the thread for the balls with a dotted line.
  7. Glue the balls over the threads in layers to create a three-dimensional pattern.
  8. An amazing case on the theme of the cartoon “Up” is ready!

Fabric cover

From the fabric, you can also make an excellent do-it-yourself phone case. This case is perfect for fans of the cartoon “Sponge Bob”. He is beautiful and original, this will please anyone. Let’s see how to make such a cover at home with step-by-step photos and instructions.

You will need:

  • Any dense fabric (better felt)
  • Acrylic paints
  • Thread with a needle
  • Scissors
  • Colored paper
  • Stencil
  • Glue

Working process:

  1. Stencil two identical blanks to fit the phone, with wavy edges.
  2. On one of the blanks, draw the face of Bob Sponge.
  3. From the colored paper, cut the blanks for the pants and glue them onto the blank with the muzzle.
  4. Now sew the two halves on the wrong side and twist back.
  5. The cover is ready!

how to make a do-it-yourself fabric cover

Leather case

You will need:

How to Make a Phone Case Without a Case
  • Piece of leather
  • Clamps
  • Scissors
  • Cardboard template
  • Thick thread
  • Gypsy needle. 2 pcs.
  • Eyelets tongs
  • A pen
  • Decorative thread
  • Eglets. 2 pcs.

Working process:

  1. To get started, measure the parameters of your phone. We add 1 cm to the length, and 2 cm to the width.
  2. Cut from a piece of leather 2 parts the size that is needed for your phone, adding the above centimeters.
  3. For two workpieces, round the corners by applying one part to the other.
  4. On a cardboard template, make small round holes about 5 mm apart.
  5. Attach the template to the leather blanks folded together (the parts are folded inside to each other) and make holes with tongs on the sides and the bottom. Secure the template with clamps.
  6. Put 2 needles on the thread on both sides.
  7. We begin to sew on the side.
  8. First, we pass the first hole with one needle and straighten the thread.
  9. Then we sew alternately with two needles, dragging the needles into one hole in opposite directions.
  10. In this way, we completely flash the cover.
  11. Now fasten the thread several times by passing the needle into the last hole. Cut off the excess.
  12. On the top of the case, make 2 holes through, at a distance of 1 cm.
  13. Thread a decorative thread into them, having previously put on the ends of the eglet. Tie a beautiful bow.

Warm thread cover

Such a soft white and fluffy phone case will warm your hands in winter frosts. It is pleasant to the touch and has a nice appearance. Let’s try to make such a case with our own hands following the instructions with a step-by-step description.

You will need:

  • White yarn
  • Glue gun
  • Scissors
  • Parchment paper
  • Scotch
  • Baking paper
  • Ruler

Working process:

  1. Wrap the phone with paper, fixing the joints and bends with tape on the side of the screen. So that the back cover has a flat surface.
  2. Using a glue gun, make a base on the back cover, glue the entire surface with glue, leaving the holes for the microphone and camera free. Also handle the side of the phone.
  3. When the glue is completely dry, remove the base, now we will work with it.
  4. Wind the thread on the ruler so that the threads are parallel. We wind up, focusing on the width of the phone, it should correspond to the width of the wound threads.
  5. Apply glue to one edge of the ruler with threads and glue on a base made of glue. We wait a few minutes for the glue to dry and cut the thread along the opposite edge of the ruler. Also cut the thread from the skein.
  6. Thus, we do until the entire cover is filled with villi. About 5 mm should be retreated from the last row.
  7. When you have glued the entire back cover, do the same with the side parts.
  8. Our case is ready!

Bead Case

A cover made of beads requires a lot of patience and perseverance from the master, so not everyone will have such a cover. Of course, you can stick beads on the phone cover, forming a pattern from it, but the knitted one will look more beautiful and elegant.

You will need:

  • Mottled beads
  • Melange yarn (cotton 100%)
  • Needle
  • Hook

Working process:

  1. Make a device for stringing beads. See photo.
  2. Pour the beads into the container and lower the needle into it, in a chaotic manner, collect the beads. So you need to fill most of the thread.
  3. We collect the first row of loops with a thread without beads. Check the width of the phone.
  4. Next, we knit with a crochet. We knit the last loop 3 columns.
  5. Then we rotate the workpiece in a circle and knit on the other hand in the same way.
  6. Further in a circle we knit another row with a single crochet.
  7. It turns out this is the bottom.
  8. Begin knitting with beads. We move one bead close to the two crochets and stretch it through them.
  9. In the same way we do the subsequent rows, each time pulling up the beads.
  10. Knit in a circle weaving beads trying on the phone to the end of the top of the phone.
  11. Now weave without beads. We knit 4 rows of single crochet.
  12. Next, we knit the pattern with double crochet and double crochet, two rows. Dilute the pattern with beads through one loop.
  13. Pull the thread through the holes in the patterns and tie a bow or tie a flower on a pigtail.
  14. Our beautiful case is ready!

In the end

In this article, we showed you 11 interesting options for making a do-it-yourself phone case. Such covers will stand out among the total mass of standard purchased counterparts. And also these covers can be used as a gift.