How To Make A Password On A Samsung

Bypass blocking with Samsung service

All Samsung devices are equipped with Find My Phone. To skip Samsung lock screen pattern, pin, password and fingerprints just follow the instructions below.

  • First of all, create a Samsung account and sign in to it.
  • Click on the “My Screen Lock” button.
  • Enter the new pin number.
  • Click the “Block” button at the bottom.
  • Within minutes, this will change the lock pin or password so you can unlock your device.

Factory Reset to Bypass Samsung Screen Lock

Factory reset is the best option in almost every case if the solutions above don’t work.

The process may vary depending on the type of device. In most devices, you must turn off the device completely to start the process.

Only this method deletes all valuable data on the device after a factory reset.

  • Hold down the power button and volume control at the same time. The bootloader menu will open.
  • Select “Wipe Data / Factory Reset” option using volume buttons.
  • Confirm by pressing the “Power” button.
  • Select “Reboot system now” when the process is over.

How To Make A Password On A Samsung

How to disable your android phone screen lock password

Screen lock protects the contents of your smartphone or tablet from falling into the wrong hands.

Samsung Galaxy phones, like all other android devices xiaomi redmi note 4x, Lenovo, huawei, on Huawei honor asus zenfon, firmware miui, zte blade, lg, sony xperia, htc, meizu, lumia, allow you to block yourself with several options, as a rule use a pin code, a password pattern or a fingerprint.

If you decide that you no longer need a phone lock, you can turn it off at any time: photographic (pattern lock), pin code, password or fingerprint. Here’s how to do it.

Note: this entry applies more to smartphones samsung j1 mini, j3, a3, a5, grand prime, duos, for android 5.1 and android 6.0, but if you have another, then the difference will not be significant.

By the way, if you forgot your password or photographic key, then you can find out how to turn off the lock screen here.

Turn on the phone and open the settings and go to the section: “lock screen and protection”.

Then, at the top of the screen, click on the line: “Screen lock type“.

In the tab that opens, click on the item “No”.

That’s all. Lock mode, in your samsung, honor, lenovo, sony xperia, asus zenfone, lji, lumiya and so on will be disabled in the future.

What to do if you have forgotten your PIN code or drawing and do not have access to your phone?

Someone may have changed the lock screen pattern to annoy you?

In order to avoid this kind of conditions, there are proven methods to bypass the screen lock pattern, pin code, password and fingerprints. Here’s how to do it.

Another way to bypass the lock on your smartphone

Take a friend’s phone and call the blocked one.

  • Accept the call and press the “Back” button without disconnecting the conversation.
  • Now you can access the device completely.
  • Go to the device security settings section and delete the pin code or picture.
  • The system will ask you for the correct PIN code, which you do not know. Try different configurations. Maybe you will guess.

    In order not to forget your password or PIN code next time, be sure to write them down on paper to ensure your complete safety. Success.

    Bypass blocking using Google service

    To Bypass Screen Lock in Samsung Android Phone, please do as follows.

    Visit on another smartphone or computer.

  • Sign in to your Google account that is used on the locked device.
  • Select the device you want to unlock.
  • Click on the “Block” button.
  • Enter password. There is no need to do any recovery messages. Again, select “Block”.
  • Now you can enter a new password and the phone will be unlocked.
  • Go to the settings screen and turn off the temporary password lock.


    I need to change the blocking method. But the phone doesn’t let me do it. How to be?

    I have a samsung j3 phone, password is blocked and I can not remove it

    How to get rid of a photographic key or password on a Samsung, see here.

    Maria was not the same problem, I will be removed for a long time you need to choose a good assistant for your Google phone or some other and someday install a good reliable agent who has the right to turn it on and off if everything is well configured, you can turn off any directly by voice voice commands

    There are problems in the language settings and speech recording, there are very expressive words to correctly write down so that the voice does not change

    How to put a password for gallery, SMS and any other applications in Android

    It often happens that your phone is used not only by you, but also by your friends or relatives. After all, if you have a Galaxy S6, then everyone wants to “touch” it :). And on the phone you have personal SMS, and in the gallery there may be such that others cannot watch them. Therefore, many users need to block some functions of their Android smartphone for others.

    A wonderful program called Smart Applock. There are other programs, but it is Smart Applock that is the most perfect, and also has a free version. You can download it in Play Market.

    Instructions on how to set a password for any application in Android:

    Launching Smart Applock.

  • In the upper right corner, click on the plus sign ().
  • Check the boxes to mark the required programs and click on the “Save” button.
  • We draw you a photographic key, we confirm it again.
  • In the dialog box, click on “No” (or “Yes” if you are afraid to forget your password)

    All. Now, to enter the applications you marked, a person will need to enter a photographic key.

    Updated 2015.02.06: The 2nd version of this application has been released and now it is called Smart AppLock 2 (App Protect). Compared to the first version, the protection algorithms have been completely redesigned, and a number of new features have been added:

    • Block incoming calls
    • Set special passwords for social networking applications: Vkontakte, Facebook, Instagram and others
    • Blocking Google Play and installing \ uninstalling programs from children
    • New design inspired by Android 5.1 Lollipop
    • Other possibilities
    • Mini FAQ

      How to prevent someone from uninstalling Smart AppLock?
      – Open the app, go to settings and enable the “Set as device administrator” feature. Enter password. Now, to remove our utility, you will need to enter this password.

      I forgot password. How can I restore it?
      When you set passwords for the first time, the program asked you which method of password recovery you would like to choose: “Secret question” or “E-mail”. If you enter the password incorrectly 3 times, then at the bottom you will see the “Recover password” button. Click on it and select the desired method. If you chose the 1st option, then enter your security question. If the second. Check your mail, within 5 minutes you should receive a backup password for recovery.

      Method 9. We use the service “Find device”

      Google created Find My Device, which has a Hard Reset feature. The lock is reset accordingly.

      1. If the device is not connected to the Internet, open the quick settings panel and connect to a mobile or Wi-Fi network (open or the one to which you have connected before).

      2.From a computer or other device, go to and log in.

      3. The service will locate the phone and when it was last online. In the list of options, select “Clean device”.

      4. Press “Clean device” again.

      5. To confirm the deletion, click on the “Clear” button.

      When the device is offline, Wipe will be done the first time you connect to the Internet.

      Method 4. Flash a smartphone or tablet

      By flashing an Android phone or tablet, you will remove the lock or password. On our website there is a detailed instruction on flashing Android devices of various manufacturers, separately Samsung using Odin and LG via KDZ Updater.

      Method 1. Enter your Google account details

      Working way for devices running Android 4.4 and below. Starting with Android 5.0, this option has been removed from many firmwares. But not all manufacturers did this, so check if it works for you or not.

      When your phone or tablet is connected to a mobile network or Wi-Fi, you just need to enter your e-mail and password to remove the lock. To do this, enter the photographic key incorrectly 5-10 times, after which a warning will pop up about blocking the device for 30 seconds.

      The button “Forgot your photographic key?” Will appear on the screen, by clicking on which you can enter your data and unlock the device.

      If you forgot your account password, you will have to restore it. Go to this page from a working gadget or PC.

      Please note that this method requires mandatory access to the Internet. Therefore, open the quick settings panel by swiping down (the “curtain” can be opened directly from the lock screen on Android 5.0 Lollipop and newer) and turn on mobile data or Wi-Fi. The device will connect to the access point if it worked in this network before.

      11. Additional PIN-code on Samsung

      On Samsung phones running Android 5.0 and below, when setting a picture, you need to set an additional PIN-code. And if you forget the photographic key, but remember the PIN-code, you can enter it and unlock the smartphone.

      Draw any wrong pattern until the message appears that you can try again only after 30 seconds.

      Then wait half a minute and click on the “Additional PIN” button in the lower right corner. Enter PIN and click “OK”.

      The lock on the phone will be completely removed.

      Method 3. Reset to factory settings

      The next method is simpler than the previous one, but using it will delete all data from the internal memory, such as installed applications, linked accounts, SMS, etc. Photos, audio and other files on SD will remain intact. Full instructions can be found in the article: how to reset settings on Android (Hard Reset).

      During the next activation of the device, restore the data from the backup. It works provided that the synchronization was carried out earlier.

      7. Clear internal memory using Fastboot

      All Android phones and tablets (except Samsung) have a Fastboot firmware mode. After rebooting the mobile device into it, the device can be controlled from a computer using the utility of the same name. Installation of Fastboot and USB drivers is described in a separate instruction. You will also need to unlock the bootloader on smartphones Sony, Huawei, LG, HTC, Pixel, Nexus, Motorola and some other models.

      (!) Unlocking the Bootloader is also done through Fastboot and in the process, data from the internal memory is erased. In the future, to clean the smartphone, it will be enough to follow the steps described below.

      To reboot the device into Fastboot mode, hold down the volume down button while turning on.

      In addition, you can switch Android to firmware mode with the ADB command if USB debugging is activated. Study the FAQ on the site for working with Fastboot and ADB in detail, run the command line (or PowerShell in Windows 10) as administrator from the “platform-tools” folder, enter the command and click “Enter”:

      Adb reboot bootloader

      In PowerShell in front, you need to add:

      When Bootloader is loaded on the machine, use one of the following Fastboot commands. The internal memory will be cleared, thereby unlocking the device:

      Fastboot erase userdata

      To transfer the gadget from the bootloader to Android, enter:

      Vpn Removal

      An enabled VPN is the main culprit for inability to unblock. A virtual network provides secure access to the network, and when activated, the transmitted data is effectively hidden from strangers and fraudsters. But using a VPN has a downside: the function requires all-round protection of the device, therefore, before starting the virtual network, the system will require the user to install a key to remove protection.

      The installed security key is not disabled during VPN operation by standard methods. To remove a pin, you need to remove the virtual network using the following algorithm:

      Go to the smartphone menu.

    • Select the section “Connections”.
    • We tap on the “Other settings” tab.
    • Select the line “VPN”.

      Open the properties of the virtual network used on the smartphone by tapping on the “gear” icon and select “Delete”. After manipulation, reboot the phone and delete the block in the above standard way.

      Decrypting a device or memory card

      Almost always, security manipulation is the culprit for the inability to remove the screen lock. For example, built-in encryption algorithms may be the cause of the problem. In an effort to protect the configured settings and personal data from hacking, you are forced to put a password on the gadget, but in order to subsequently disable the PIN, you must first abandon encryption:

      Open the menu and go to “Options”.

    • Choose “Security”.
    • We are looking for the section “Encryption and tap on it.
    • Choose “Decrypt.
    • Go through the line “Encrypt external memory” and click “Disable”.

      To successfully complete the changes made, open the “Lock Screen” and tap “No”. After disabling encryption, the key will be removed.

      How to remove password from Samsung phone

      How to remove password from Samsung phone? A seemingly simple task, sometimes not feasible due to malfunctions in the smartphone. The article provides working methods on how to get rid of the service that has become unnecessary.

      The main reasons for removing a password from a Samsung phone

      There may be several reasons to find out how to remove a password on an old Samsung:

      • You keep forgetting your pin;
      • You gave your smartphone to relatives who find it difficult to enter the key;
      • You were given a smartphone or you bought it from your hands;
      • The key was installed accidentally and is absolutely unnecessary;
      • The smartphone screen is damaged, due to which the touchscreen does not respond well to touch.
      • Another reason is the presence of an outdated smartphone that has already worked out a sufficient period of time, and the touchscreen responds with malfunctions. Entering a password in such a situation becomes a real pain.

        Disable administrator rights

        A number of applications require administrator rights for stable operation, but providing them with this functionality sometimes leads to errors when trying to remove the smartphone screen block. It is easy to fix the problem by following the instructions:

        We go into the Samsung settings and look for the “Lock Screen”.

      • Here we stop at “Other parameters”, then tap on “Device Administrators”.
      • The list contains all the “privileged” programs. Next to each, move the sliders to disable administrator rights for them.

        In standard cases, all sliders move, but if one of them is inactive, there is a virus on the Samsung device. Remove it using a mobile antivirus, and then perform the manipulation to disable administrator rights again. The culprit program, of course, will also need to be removed from the phone, thoroughly cleaning up its traces on the device.

        Removing certificates

        Another “culprit” of the impossibility of unlocking in the standard way through the settings menu is once installed applications that demanded, in the name of security, to put a digital or photographic password on the smartphone used. One of the applications that you once downloaded from the playmarket contains special security certificates, and while they are valid on your smartphone, you will not be able to remove the key.

        There is only one way out. To remove the notorious security certificates, following the step-by-step instructions:

        We open “Security”.

      • Looking for ” options”.
      • Click “Delete credentials”.

        The system will ask you to confirm the deletion, after which it remains to wait for the cleaning to complete, reboot and try to remove the pin in the standard way through the menu.

        Third-party security certificates are not always to blame: if the line “Delete credentials” is not active when opening a section, it means that there are no programs on Android that make it impossible to unlock.

        How to set a password on a computer at login

        If you want to protect your data from strangers, then you can set a password on your computer when you log into your account. In this article, we will explain how this is done in Windows 10, Windows 8, Windows 7 and Windows XP operating systems.

        How to set a password on a computer when logging into Windows 7

        To set a password on a computer running Windows 7, you need to go to the “Control Panel”. To do this, click on the “Start” button and on the right side of the menu select “Control Panel”.

        Once you open Control Panel, go to the User Accounts and Family Safety section, and then to the User Accounts subsection. As a result, a window with your account settings should open in front of you. If you want to set a password to log in under your account, then click on the link “Create a password for your account.” If you want to set a password for another user, then click on “Manage another account” and select the user you need. But keep in mind that for this you need administrator rights.

        Next, you will need to enter a new password twice, enter a password hint and click on the “Create password” button.

        The password will then be generated. Now when you try to log into this account, you will be prompted to enter a password.

        How to set a password on a computer when logging into Windows 10 or 8

        In order to set a password on your computer when you log into Windows 10 or Windows 8, you need to go to the “Options” menu. In Windows, it is enough to open the “Start” menu and select “Settings”. In Windows 8, the options can be accessed through the right side menu.

        After you have opened the “Options” menu, go to the “Accounts” section, and then to the “Login Options” subsection. Here you can set a password on your computer, for this you need to click on the “Add password” button.

        And enter the new password twice, as well as the password hint.

        After that, the password will be set and without it, you will not be able to enter your account.

        How to set a password on a computer when logging into Windows XP

        If you are using the Windows XP operating system, then in order to set a password on your computer you need to go to the “Control Panel”. To do this, just click on the “Start” button and in the menu that opens, select “Control Panel”.

        After entering the “Control Panel” you need to open the “User Accounts” section.

        Next, select the account for which you would like to set a password on your computer when you log in. Please note that you can always set a password for your account. But, in order to set a password for other accounts, you need to have administrator rights.

        Once you have selected an account, click on the link “Create password”.

        The last step is filling out the form. Here you need to double-enter the password that you want to set on the computer when you log in, as well as the password hint. After filling in all the fields, click on the “Create password” button.

        That’s all, now when you log into the computer under your account, you will see a password prompt.

      • TURBION.NET 2021