How to install Windows on a macbook

Models that can run Windows 10

  • MacBook Pro (2012 and up).
  • MacBook Air (2012 and up).
  • MacBook (2015 and up).
  • iMac Pro
  • iMac (2012 and up).
  • Mac mini (2012 and up).
  • Mac Pro (2013 model).

System requirements for installing Windows 10

  • Updated to the latest version of the operating system macOS.
  • The device must have at least 64 GB of free space (required to create an additional partition for installation).
  • In the process of using the OS Windows 10 will require an update, which takes up significant space on the hard drive. Therefore, it is necessary to reserve 128 GB for the installation of the system from Microsoft.
  • For some Apple models, an external memory device (flash drive, portable hard drive) is required to install the OS. Its capacity must be at least 16 GB.
  • You need to copy the installer to an external drive to install 64-bit Windows 10 (Home or Professional Edition).

To install the OS, you must use the full version of Windows. If the user has an installation disk DVD-disk, you need to make a copy of it on the device. If Windows 10 was created on a USB flash drive or there is a product key, but there is no distribution kit itself, then Windows can be downloaded from the official website of the company Microsoft.

How to install Windows using Boot Camp Assistant?

The Boot Camp Assistant utility allows you to install Microsoft operating systems on Apple laptops and computers. It will be possible to select the system when the device is booted.

Algorithm for installing Windows 10 on MacBook and rules for switching between systems

Not all commonly used programs for work or play run on the MacBook platform. Therefore, many users want to install the Windows 10 operating system on Apple computers and laptops. There is a way how to do it. You need to install Windows as the second OS on the device using Boot Camp, and then simply select the required platform at startup.

install, windows, macbook

Algorithm for installing Windows 10 on MacBook

  • You must run the Boot Camp Assistant utility (located in the Programs. Utilities directory). Next, you need to follow all the instructions that the system will give. Thanks to this application, the user creates a Windows distribution and a BOOTCAMP partition on the hard drive. If required, an external storage should be connected during installation.

Once the user has created a new partition, it cannot be resized. Therefore, it is recommended to set a minimum value of 128 GB for the comfortable operation of the software.

  • After Boot Camp Assistant exits, it will reboot and boot into Windows. Usually the system selects and formats the required partition on its own. If the user uses an external drive for installation, the system will ask “where to install the OS”. BOOTCAMP should be specified. Then you need to format the selected section. The section can be named as it will be convenient for the user.
  • After formatting, the system will copy the data from the external drive to the selected BOOTCAMP partition. After the end of the process, you need to disconnect the USB flash drive (or take out the DVD). Further, following the prompts of the system, the user needs to install Windows. After the complete installation, the computer will reboot and automatically go to the Windows profile. Next, you should install all the software that you need to work.

How to uninstall Windows from Mac

To uninstall, just run Disk Utility and erase the partition in it that was reserved for Boot Camp with Windows. Then expand the main partition using the freed up space.

What do we need

Free storage space. The minimum installation volume is 64 GB, and the recommended volume is 128 GB.

In practice, you can get by with a smaller volume, but there is always the possibility of a lack of space for the normal operation of the system or installation of the necessary software.

For desktops, you will need a keyboard and a pointing device so that you do not constantly reconnect them in different operating systems. It can be either a wired solution or third-party models that have multiple channels for pairing with multiple devices.

install, windows, macbook

USB storage device 16 GB or larger. This disc will not be required for owners of computers manufactured in 2015 or newer.

Microsoft Windows installation disc (ISO) image or installation media for this operating system. You can download the image on the Microsoft website.

Average, although there are offers and cheaper at your own peril and risk.

How to run macOS or Windows

Now, when you start the computer, the macOS operating system will automatically start, and if you hold down the Alt / Option key, you will see a menu with a selection of the partition to boot.

To quickly switch from Windows to macOS, you can use the utility in the tray (lower right corner), which allows you to restart your computer with another OS in one click.

To go back, go to System Settings. Boot Volume, enter the settings unlock password and select the Windows partition to boot.

How to properly install Windows 10 on Mac

Many Mac owners often need the Windows operating system. Some need it to run their favorite games, the second. for the operation of specialized software, and the third just for a change.

We decided to remind you how to correctly and quickly install Windows 10 on a Mac so as not to mess with virtual machines and similar solutions that do not allow you to work stably in Windows and get the most out of your computer’s capabilities.

How to install Windows 10 step by step

Launch Boot Camp Utility via Spotlight Search, Finder, or Launchpad.

Provide the program with the path to the downloaded image and select how much space on the installed drive to allocate for installing Windows.

Think carefully at this stage, because you cannot change the partition used without reinstalling Widows. If you plan to play games or run heavy applications, it is better to allocate more space right away.

Wait until the required drivers and data are loaded from the network. After downloading and restarting the computer, the installation of Windows 10 will begin.

The installation wizard will ask you to make basic settings and specify the partition where Windows should be installed. It will already be named BOOTCAMP.

After the installation is complete, you will need to make final adjustments to the system parameters.

Once on the Windows desktop, you will need to launch the Boot Camp utility. It will be stored on the system disk or on a removable drive that was created during the preparation phase.

After installing all the components and restarting Windows, you need to connect to the network via Wi-Fi or cable and run Apple Software Update from the Start bar.

All available updates should be specified in the program. Install from and restart the computer.

Which Mac computers can install Windows 10

Officially 64-bit Windows 10 Home or Pro using the Boot Camp utility can be installed on the following models:

  • MacBook Pro / Air (2012 and newer)
  • MacBook (2015 and newer)
  • iMac / Mac mini (2012 and newer)
  • iMac Pro (2017)
  • Mac Pro (Late 2013)

There is only one limitation: when using macOS Mojave, you won’t be able to install Windows via Boot Camp on an iMac with a 3TB hard drive.

This is due to the peculiarities of combining different APFS and NTFS file systems on drives of this capacity. Learn more about this on the Apple website.

The rest of the models support installing Windows 10 right out of the box without any problems.

Artyom Surovtsev

I love technology and everything connected with it. I believe that the greatest discoveries of humanity are yet to come!

Virtual Machine on Mac

Now virtual machines, third-party programs have begun to be updated. Already on the mac axis, you can run a program that allows you to “roll” Windows.

The disadvantages of this solution include significantly reduced performance. This is logical. Indeed, in addition to Windows, resources must also be spent on the mac axis itself, in which the virtual machine is launched.

Of the advantages. you can work in two operating systems at the same time almost seamlessly.

The pioneer is the Parallels virtual machine, which now allows you to install Windows on Macs with ARM processors.

But there are some nuances, about them later in the article.

Installing Parallels [Step 3]

The program is paid, but there is a 14-day trial period. It’s enough for familiarization and testing.

After downloading, install the program. If during installation the message “This version of Parallels Desktop is not supported on Mac” appears, it means that the developers have not yet released the final working version for Mac on the M1 chip.

It doesn’t matter, there is a working version with the Technical Preview status (link to the program). There the developers left the key for testing.

Register and download the program. During installation, it will be written that this version of the program is designed specifically for Apple Silicon processors.

After installing Parallels Desktop, the program will offer to install the virtual machine.

Usually, the Windows 10 image for ARM is pulled up automatically, but in case of problems, the path to it can be specified manually.

The application will prompt you to log into your Parallels account

and enter the activation key. If you downloaded the test version of Parallels Desktop for M1, then the key is on the page where you downloaded the program.

Next, the automatic Windows installation process will begin, which takes about 10 minutes on new MacBooks.

Drivers for external peripherals (mouse and keyboard) will be installed automatically. And everything will work without any user involvement.

Downloading Windows 10 ARM version [Step 2]

After registering for the Insider Preview program, you should have no problem downloading the image. The image weighs about 8 GB.

Configuring Windows in Parallels Desktop [Step 5]

Parallels automatically allocated a dual-core processor (1.5 GHz), 4 GB of RAM and 256 GB of user memory for Windows. There is no information about the video card. The monitor is configured in native resolution.

Windows in a virtual machine outside the pause mode and without running programs practically does not “eat up” the power of the chip, but it consumes more than 6 GB of RAM (it uses the swap file).

So if you plan to use Windows 10 all the time, be sure to get a Mac with 16GB of RAM.

To allocate more resources for virtual Windows 10, shut down the virtual machine and go to Actions. Configure before restarting.

In the “Hardware” tab, you can increase the performance of the processor, graphics and allocated memory.

Be warned, some settings may cause Windows to not start. You will have to set the default parameters.

The Mac touchbar for Windows looks much better than for macOS. It contains the F1-F12 keys and other auxiliary keys not found on the MacBook keyboard.

Installing Windows 10 with 64-bit support [Step 4]

To install an assembly of Windows 10 that supports 64-bit programs, you need to perform a system update in developer mode.

We go to the Start menu. Settings. Update and security. When checking for updates, build 21277, which supports running through the 64bit program emulator, will be unavailable.

  • Go to the Windows Insider Program section.
  • Add a registered account.
  • In the “Diagnostics feedback” section, activate the “Optional Diagnostic Data” item. The rest can be omitted.
  • Go back to the Windows Insider Program section and change the beta channel to the Dev channel.
  • After that, in the Windows Update section, click “Check for Updates” and download the coveted assembly with x64 support.

Windows 10 for ARM is currently only available in English. If you manage to russify, write in the Комментарии и мнения владельцев.

Installing Windows 10 on Mac

When all the preparatory work is completed, you can start installing the “Windows” itself on the Mac.

  • Connect the USB drive to your computer and copy the operating system ISO file from it to your desktop. If you downloaded an image directly from a poppy, plug in the USB drive anyway, you just don’t need to copy anything from it.
  • Open Spotlight search and type Boot Camp. Boot Camp Assistant will appear in the search results. Run this application.
  • On the introductory screen, click Continue.
  • Make sure there are checkmarks next to all three items in the next step. Create Windows 7 or later installation disc, Download latest Windows support software from Apple, and Install Windows 7 or later should be checked. Ignore the fact that BootCamp mentions Windows 7 everywhere.
  • Next, provide the system with the path to your ISO file, and also select the disk where the installation files will be written. Please note that the drive will be completely erased before recording, so take care of backing up the information you need.
  • Click Continue and wait for the application to copy all the required data to the media. This process will take some time, depending on the speed of your drive or the configuration of your computer.
  • The next stage is the distribution of disk volumes. Click on the point between the drives and drag it to the left to increase the size of the Windows partition. If you drag it to the right, the disk will shrink. Alternatively, you can split the disc into two equal parts. To do this, click the corresponding button Divide into equal parts.
  • Allow the app to make changes. To do this, enter your account password.
  • Wait for the partitioning to complete. After this procedure, the computer will go to reboot.

Now the traditional Windows 10 installation process begins. It is practically no different from installing Windows on a regular PC, with the exception of a few points.

Attention. Install Windows 10 only on the drive marked as BOOTCAMP. When you click on it, the system will tell you that you cannot install Windows on this drive, because it uses a different file system. This is solved by clicking on the Format button in the interface for selecting a partition for installing the operating system.

After installing Windows, carry out the initial setup of the operating system and wait until it boots. When you get to the desktop, the BootCamp installation interface will immediately appear. It is very important to install this utility, otherwise you will not be able to boot back into macOS. In addition, it installs all the drivers required for the operating system. In fact, after just two clicks, you get a ready-to-use system.

Preparing to install Windows 10 on Mac

First, you need to make sure that you have everything you need to install a Microsoft operating system on an Apple computer. You will need:

  • USB stick with at least 5 GB.
  • Windows 10 operating system as ISO file.
  • Internet connection.
  • Lots of free time.

Please note that you will need a Windows computer and the Media Creation Tool to download the official ISO files. If you do not have access to a PC right now, you will need to download an operating system image from the Internet. In addition, you will definitely need the password for the current user account on the Mac. If you don’t have euj, then you won’t be able to install Windows 10 on Mac.

Note again that although you can get the Windows 10 installation image for free, you will need to activate the operating system after installation. For a while you can use it without activation, but you will not have access to some of the functions, such as personalization. If you want to install Windows 10 on a Mac for permanent use as a primary or parallel system, make sure that you have an officially received activation key. No one will prevent you from activating the system illegally, but we strongly advise against doing this.

How to switch from Windows 10 to macOS

If your computer has several operating systems installed, the interface for selecting the required one appears every time you turn on the PC. This is not possible on a Mac, so switching back to macOS from Windows 10 or from macOS to Windows 10 can be a mystery to the untrained user.

To reboot from Windows 10 to macOS via BootCamp, you just need to right-click on the BootCamp icon in the notification area (gray diamond) and then click Reboot in OS X. Confirm your choice and the system will go to reboot into the apple operating system.

How to install Windows 10 on Mac

If you have a Mac computer, you’ve probably already noticed that there are many similarities between Apple and Microsoft operating systems, but even more different. Windows 10 often offers its users features that macOS doesn’t have, and quite the opposite. Therefore, sometimes it becomes necessary to install Windows 10 on a Mac. This is very easy to do.

How to download the Windows 10 installation image

If you do not have a Windows 10 computer, then you will have to search the Internet for clean ISO files to install the operating system. Fortunately, the Internet is full of this good. If you are too lazy to look for, just take a look at the link in the article “How to download ISO images of Windows 10 and 8.1 from the official website.” There you will find all the available methods to legally download the official Windows 10 image.

If you have access to Windows 10 or any other version of Windows, then you need to use the Windows Media Creation Tool.

  • Download WMCT from the link from the official Microsoft website.
  • Run the utility and agree to the terms of use. On the second screen, select the Create installation media option.

How to switch from macOS to Windows 10 via BootCamp

Again, you’ll have to dive into macOS settings a bit.

  • Open System Preferences. Boot Volume.
  • After that click on the lock at the bottom left of the window.
  • By default, the system blocks any tampering with this section, so you will have to enter your account password.
  • Click on BOOTCAMP Windows and then Restart. Confirm your choice and the computer will restart into Windows 10.

How to uninstall Windows 10 from Mac

The process of uninstalling Windows from Mac takes place in the same utility in which the operating system is installed.

  • Open Spotlight and enter Boot Camp. Launch Boot Camp Assistant.
  • In the Select Actions window, uncheck Create Windows 7 or later installation disc and Download the latest Windows support software from Apple. Leave a check mark only next to Uninstall Windows 7 or newer.
  • On the next screen, the system will recover the disk to one partition or volume. Click Recover. Confirm the action by entering your account password.
  • Wait until the procedure is completed, after which the system will again have only one volume and one operating system.

Of course, there are still other ways to install Windows 10 in parallel with macOS, but this is a topic for a separate discussion. This article also gave you all the information you need to install Windows 10 on a Mac in dual block mode using macOS built-in tools.

How to install Windows 10 on a 2011 and earlier MacBook or iMac?

Apple is artificially limiting the ability to install Windows 10 on late 2011 and older MacBooks. In other words, you can’t install Windows 10 on older MacBooks and iMacs. But we know one way.

Probably, for this, Apple has some reason to prohibit the installation of Windows 10 on old MacBooks, which, however, do not suit the owners of these devices. Therefore, we decided to tell you how to modify the Boot Camp utility in order to be able to install Windows 10 on a MacBook or iMac.

It’s easy enough to understand that your MacBook or Aimak doesn’t support Windows 10. when you start Boot Camp utility, you will not see any mention of Windows 10:

Remember, all of the following actions are performed at your own peril and risk! be careful.

Be sure to make a copy of the utility first Boot Camp (copy using context menu).

The name matters, since further commands in the console are designed specifically for the specified name.

[2020] How to Run Windows 10 on Mac for FREE (Step by Step)

So, open the Terminal and write the command:

sudo nano / Applications / Utilities / Boot Camp Assistant2.app/Contents/Info.plist

In the file that opens, we are looking for an entry Win7OnlyModels and erase the content along with the opening and closing tags array.

Also I deleted the entries SupporedNonWin10Models and UEFIOnlyModels.

These steps are sufficient if you are going to install Windows 10 from a DVD. To save, you need to enter the key combination CtrlX and confirm with the key Y.

However, if you have already installed an SSD in a MacBook, and even instead of an optical drive using Apple Optibay and want to install an operating system from a USB flash drive, then additional steps will be required:

First you need to go to the system information and save the model ID and version Boot ROM.

Then, in the already open Terminal, you need to move to the section with the name CFBundleVersions, create a section immediately after it DARequiredROMVersions (if it was not already there, as in my case) and write after the tag array model id using tags string.

Then let’s move on to the section PreUSBBootSupportedModels, delete the prefix Pre and write the model ID again.

The identifier must also be registered in the sections PreESDRequiredModels and PreUEFIModels.

To save, you need to enter the key combination CtrlX and confirm with the key Y.

After all the manipulations done, when you start Boot Camp Assistant2, you will see a window like this:

It should be noted that the first time you reboot, you may see a standard error on the black screen “No bootable device.” in this case, turn off the MacBook by long pressing the power key, and then turn it on while holding down the Ctrl key to select boot from a USB flash drive.

Since MacBook and iMac 2008, 2009, 2010, 2011 do not officially support the installation of Windows 10, then there may be no drivers for this OS. For devices in 2011, the main problem is the sound card driver error (not yet resolved), otherwise everything is fine. Using Airpods via Bluetooth saves in this case. For older models, after installing Windows 10, there may be more serious problems. be ready.

Installing Windows on MacBook Air

The installation process takes no more than an hour and requires the following steps:

  • Insert the USB flash drive.
  • We connect the USB-DVD drive and insert the Windows distribution into it.
  • Launching Boot Camp.
  • In order to partition the disk, by moving the slider, we determine the amount of space on the built-in drive, which we will allocate for OS X and Windows. For example, in half “Divide into equal parts”.
  • We press the button “Install”. The process will take about 30 minutes. Finishing Boot Camp installation will restart your computer.
  • After the computer has restarted, the automatic installation of Windows will begin. Everything will be as usual here. Enter the data requested by the system step by step and wait. Windows may ask for manual formatting of BOOTCAMP to NTFS. Agree and format.
  • After the download finishes, the Windows support software from Apple will be installed on the computer.

Preparing to Install Windows on MacBook Air

  • external USB-DVD drive;
  • Windows 7 Home Premium 64-bit;
  • 8 GB flash drive.

How to install Windows on MacBook Air: step by step instructions?

Experts and users alike agree that MacBook laptops are superior in reliability, lightness and power. However, for adherents of Windows, Apple developers have provided the ability to work this operating system on Macs.

The process of installing Windows on any Mac is not a big problem. In principle, the procedure is similar to installing Windows on a “regular” PC, only it takes a little more time. The easiest way is to use the standard OS X Boot Camp Assistant utility.

Loading and selecting a RAM

Mac does not support the “traditional” operating system selection menu. Therefore, even after Windows, when you reboot or turn on, OS X will still boot.

In order to switch to Windows, hold down the Alt key while booting, which will cause a selection menu to appear on the screen, which will most likely contain three options:

  • Recovery (OS X recovery).
  • OS X.
  • Windows.

We mark Windows. Unfortunately, Windows is rebooted much more often than OS X, so it makes sense to set Windows to start automatically. This can be done again through Boot Camp.

Uninstalling Windows from MacBook Air

In the case when Windows is no longer needed on the MacBook Air and you want to uninstall it (everything takes less than a minute):

  • Boot under OS X.
  • Activating the “Boot Camp Assistant”.
  • Click on the option “Remove Windows 7 or newer”.
  • The uninstallation process will start automatically.
  • We are waiting for the end of the process.

Why Windows?

Apple is aware of the appeal of Windows, so they build Boot Camp into their OS. For those who don’t know, Boot Camp allows OS X users to partition and install Windows as a second system. Despite the chic (and expensive) Apple PCs, any modern MacBook can run Windows.

One of the main reasons Mac users switch to Windows is great gaming experiences. In addition, there are many desktop applications that are written only for Windows, and some users may need them. Finally, this OS is simply adorable. Windows 10 is in all the headlines right now, and how else to attract Apple fans if it’s not (practically) free new OS?

Apple makes the process of installing Windows 8 or even Windows 10 very comfortable. In this video, I’ll show you how in about 45 minutes you can download the latest OS from Microsoft on any modern MacBook.

In this example, we’re using a mid 2015 15-inch MacBook Pro with 256GB hard drive space and Intel graphics.

Parallels Desktop and Windows 10 on Mac

Windows run on Mac and inside OS X through a virtual engine. For this there is a virtualbox service that does not require a fee, as well as expensive products. The most comfortable software is Parallels Desktop. It is not only comfortable, but also super productive and gentle in relation to MacBook batteries.

install, windows, macbook

For ordinary users who want to easily run Windows software on Mac and interact with it comfortably without delving into the settings, this is the only right solution. Even though you have to pay, this is the best product.

You can download or purchase a free trial version of Parallels Desktop on the product resource on the network. https://www.parallels.com/en/. Here you can also find “fresh” help on the functionality of the software. Next, we will briefly describe the steps of installing Windows 10 in Parallels and how this system establishes a relationship with OS X.

  • After Parallels Desktop is installed on the MacBook, the application is launched and the generation of a new virtual engine is selected (via the File menu section). You can directly download Windows 10 from the developer’s resource on the network, or select a special installation section. In the latter situation, the “native” ISO image is used.
  • After choosing the image, it is proposed to do the same with automatic settings for the installed system according to the area of ​​its use. for the office or for games.
  • Next, it is proposed to drive in the solution key (the operating system is installed even if a partition is selected, which does not require a key for this variation, but activation will be required in the future). Then the installation operation will start. Some steps in this process are done manually in a clean install on a machine. The user is formed, the drivers are installed, the settings items are selected.

As a result, a 100% operating operating system is purchased inside OS X. It operates in Coherence mode, that is, the software windows start up like regular OS X windows. And when you click on the virtual machine symbol in the Dock, the Start section will open. And even the notification scope integrates.

In the future, the values ​​of the actions of the virtual mechanism can be adjusted. For example, launch a “window” in full screen mode, adjust keyboard values, disable shared access to elements of both operating systems, and more. If in the process something becomes incomprehensible, detailed software help will help.

Booting Mac to Windows

You know how to install Windows 10 on an Apple operating system. Now let’s go further. After installing and starting the system, the Boot Camp elements will also start from the flash drive. You only need to follow the instructions that pop up on the display. As a result, all the necessary drivers for Windows and related software will be installed on the device.

If the launch did not take place, open the bootable USB flash drive in the operating system. Find the BootCamp folder there and run setup.exe.

When the installation is complete, you will see the Boot Camp symbol on the bottom right. Use it to customize the movements of the touch panel. Initially, it functions differently from Windows. You can change the system downloaded automatically. Or just restart.

Upon returning to OS X, a PC / laptop restart is used to reboot the installed operating system. To do this, the Option or Alt element is pressed and held for a few seconds.

Attention! Activating Windows 10 on Apple devices follows the same principles as for PCs. Digital binding of the license purchased through the upgrade of the previous version of the operating system works in Boot Camp. In particular, when the volume of the partition fluctuates or the Mac operating system drops. If you previously had an active license for Windows 10, during a secondary installation, when prompting for a solution key, you can select the section about its absence. And after connecting to the network, activation will be performed automatically.

Alternative installation option

I can suggest another efficient and easy way to upgrade to Windows 10 on a MacBook Pro. installing the OS on a Parallels Desktop 10 virtual machine. To test the released assembly, you do not need to use a separate PC. In addition, thanks to the use of this virtual machine, you can work with Windows 10 in the OS X environment. Parallels can be downloaded quickly and completely free of charge. Before that, you just need to go through a simple registration in the Windows Insider app and download the Windows 10 Technical Preview. Finally, just download the Technical Preview VM shell on a MacBook with Parallels Desktop 10 installed.

On this I want to finish my article and really hope that it is useful to you. Do not forget to subscribe to updates on my blog, as well as tell friends on social networks about the release of new material. See you soon.

Install Windows 10 on a Mac using Boot Camp

Boot Camp is used to install Windows 10 on supported Mac computers running OS X Yosemite or later.

Windows 10 requires supporting software (drivers) installed with Boot Camp. This software is automatically loaded when you use Boot Camp Assistant. Boot Camp supports 64-bit versions of Windows 10 on compatible Mac computers.

The Windows 10 operating system is available from Microsoft as an ISO file or a version on a USB flash drive. To install Windows on a Mac, you need a 64-bit Windows 10 ISO installation file. If you purchased the version on a USB flash drive, download the ISO file from the Microsoft website and use the Windows setup key that came with the flash drive. drive. If this is the first time you are installing Windows, make sure the Windows Installer you are using is for a full installation (and not for installing an update).

If you are installing the Windows 10 Anniversary Update ISO file from a flash drive, make sure you are using a USB 2 drive. Installing using a USB 3 flash drive does not work.

If your Mac is running an earlier version of Windows, follow these steps to upgrade to Windows 10:

You can upgrade existing 64-bit installations of Windows 7 or 8.1 to Windows 10. The Windows partition must have at least 10 GB of free space. If your computer is running Windows 8.0, first upgrade to Windows 8.1 and then to Windows 10.

  • Use the checklist at the end of this article to check if your Mac supports Windows 10.
  • Download macOS on your Mac.
  • When the Mac desktop appears, choose App Store from the Apple menu. Click the Updates tab in the App Store window to check for software updates. Make sure macOS and Mac firmware are up to date.
  • Download the version of Windows installed on your Mac.
  • Open Apple Software Update for Windows and install any available updates, including the FaceTime camera driver update. FaceTime is not available in all countries / regions.
  • Update Windows using Windows Installer.
  • After installation completes, reopen Apple Software Update for Windows and install any available updates to work with the latest Windows driver software (drivers) for Boot Camp. Mac may restart one or more times during driver installation.

After the drivers are installed, sign in to Windows to get started with Windows 10 on your Mac.

If your Mac is running 32-bit Windows, you need to back up important files so you can delete your existing Windows partition and install 64-bit Windows.

The current version of Windows drivers (support software) from Boot Camp Assistant provides support for the following Mac features in Windows 10:

  • USB 3;
  • USB-C;
  • Thunderbolt;
  • built-in SD or SDXC card slot;
  • built-in optical drive USB Apple SuperDrive;
  • Apple keyboard, trackpad and mouse.

Windows 10 can be installed on an internal drive on your Mac. Boot Camp Assistant creates a Windows-compatible partition on the disk. When you install Windows on a Mac with a Fusion Drive, the Windows partition will be created on the mechanical part (the hard drive, not the solid state drive). Microsoft BitLocker software is not compatible with Boot Camp volumes.

After Windows is installed, you can install the latest version of iTunes for Windows to play music or videos. To play music and videos purchased from the iTunes Store, you need to authorize iTunes on Windows.

If some features don’t work when you start your Mac from a Windows 10 partition, try reinstalling Boot Camp Assistant software using Boot Camp Assistant.

The following Mac models support 64-bit installations of Windows 10 using Boot Camp. To find out your Mac model, select About This Mac, then browse the list below to check if that model supports Windows 10:

  • MacBook Pro (2012 and later)
  • MacBook Air (2012 and later)
  • MacBook (2015 and later)
  • iMac (2012 and later)
  • Mac mini (2012 and later)
  • Mac mini Server (Late 2012)
  • Mac Pro (Late 2013)

How to install Windows 10 on a Mac using Boot Camp Assistant

Installing Windows 10 on Mac as a second operating system

All modern variations of Mac OS X contain tools for installing Windows on allocated disk space. Boot Camp Assistant. The application is located through Spotlight or a sub-item with utilities in the program section.

The operation will require an image with the system, an empty USB flash drive (preferably 8 GB, no less). A lot of empty space on the SSD / hard drive is also a prerequisite.

  • Start Boot Camp Assistant software and click on the “Next” section. In the window for selecting actions, the sections for creating a disk for the Windows installation are marked. Apple’s downloads area will be marked on the machine. The continuation item is pressed.
  • In the next window, the trajectory to the Windows 10 image is indicated and the flash drive is selected, where it will be written (during the infa it will be erased from it). The continue button is pressed.
  • The operating system files will be copied to the drive, you will have to wait a bit. At this step, drivers and additional software will be downloaded from the network and written to the flash.
  • A partition is created for installing Windows 10 on an SSD or hard drive. For these purposes, it is recommended to look for a minimum of 40 GB. And if in the future it is planned to install volumetric software. and even more.
  • The installation button is pressed. The device automatically restarts and prompts you to select a drive. The download will be made from it.
  • The USB. drive “Windows” is selected. If, after restarting, the device selection menu does not pop up, the process is performed manually. To this end, the Option key is pressed and held.
  • Windows 10 installation operation will start.

This is how Windows 10 is installed on a MacBook Pro. The following describes the upload process.

How to customize your MacBook Pro display

After installing Windows 10, all standard settings will be activated by default. In order to customize them to your “taste”, follow these steps:

  • Click on the Start Menu;
  • Click on “Options”. This icon looks like a gear and is located on the left side of the menu, above the power icon;
  • Select the “System” section;
  • Select the “Screen” item;
  • Move the slider to 200%, or depending on your preference;
  • Log in and log out.

How to install Windows 10 operating system on MacBook Pro

If you have a MacBook Pro, and you just can’t get used to the MacOS operating system, you can install Windows 10 on it. Especially for you, we have prepared step-by-step instructions and will tell you about all the features of installing this operating system on an “apple” laptop.

How to set up mouse and touchpad backward scrolling in MacBook Pro

If you’ve been using macOS on your MacBook Pro for a long time, you’re probably used to scrolling with the touchpad. Reverse scrolling is usually provided on the PC, however you can fix this using the Registry Editor.

  • Click on the search bar that is on the left side of the taskbar;
  • Type Regedit and press Enter;
  • In the pop-up window, click “Yes”;
  • In the registry editor, go to the directory HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Enum \ HID;
  • In the HID section, you will see several folders starting with VID;
  • Expand each folder and look for the item “Device Parameters” (This item is only in one of the folders, but in order to find it, you will have to search in all);
  • When you find the “Device Parameters” element, click on it, and in the right window, change the value in the “FlipFlopWheel” item from 0 to 1 and click “OK”;
  • Do the same with the FlipFlopHScroll parameter;
  • Restart your MacBook Pro.

Alternatively, you can also use the flip-flop-Windows-wheel app from GitHub github.com/jamie-pate/flipflop-Windows-wheel, which will do these settings automatically. Just download the file, run it and click ‘Flip’. After that, restart your MacBook Pro for the settings to take effect

How to install Windows 10 on a MacBook Pro using the Boot Camp app

Once the download of the image with the Windows 10 operating system to the USB flash drive is completed, open Boot Camp. This proprietary application will help you format the memory of your laptop and install Windows 10 on it. Keep in mind that when formatting, all information will be deleted from the laptop, so if there is any data in the section that you will format, be sure to save it in another location. To install Windows 10 from a bootable USB flash drive:

  • Connect it to your MacBook Pro;
  • Open the Boot Camp Assistant app;
  • Click on the “Continue” button. Boot Camp Assistant will automatically find the ISO file you downloaded earlier;
  • The system will prompt you to choose the options for installing Windows 10. You can leave MacOS, if you need this operating system, and provide the rest of the free space for Windows 10, or simply uninstall it. Please note that you will not be able to resize the disk for Windows 10 later (however, you can do this using third-party software, or use Boot Camp again, uninstalling Windows and starting all over again);
  • In order to start the process of formatting the disk and installing Windows 10, click on the “Install” button;

If you’ve done everything correctly, your MacBook Pro will automatically restart. For a while you will see a black screen, after which you will see the Microsoft progress indicator. Due to the fact that the operating system has not yet installed the necessary drivers, the text may be very small, but soon everything will return to normal.

  • Select a language, customize keyboard settings, and select the desired format;
  • Click “Next”;
  • Click “Install Now”;
  • Click “Next”;
  • Accept the terms of the license agreement;
  • Click “Next”;
  • After clicking on the “Next” button, the installer will start, which will prompt you to select a partition for installing the Windows operating system into it. This stage requires very great care and attention, since choosing the wrong partition, you can accidentally delete all data on your computer. Make sure you select Drive 0 Partition X: BOOTCAMP;
  • Click “Format”. After that, the Windows 10 installer will format the partition;
  • To start installation, click on the “Next” button;
  • If you do not have a Windows license key, you can skip entering it and continue installing the OS. The Windows 10 installer asks you to enter the key two times: the first before installation, and the second after it. Both times you can skip entering this key and continue working.

Typically, the operating system installation process takes 15 to 20 minutes. Your MacBook Pro may reboot frequently during Windows 10 installation. Don’t worry, this is required to install the required drivers.

Step-by-step instructions for installing Windows 10 on MacBook Pro

Installing the Windows 10 operating system on your MacBook Pro is pretty straightforward. To do this, you will need two things: a USB stick with at least 4GB and a Windows 10 image. We also recommend that you create a MacOS backup just in case.

How to set up Windows 10 on a MacBook Pro

After several reboots of your MacBook Pro, you will see the Windows 10 operating system installed. Windows Boot Camp will start up with it and you will need to allow its installation. At the last stage of installation, you will have to agree to all terms of use. Windows Boot Camp is required to properly install all necessary drivers for Wi-fi, touchpad, keyboard, and so on on your MacBook Pro.

Later you can find Boot Camp in the taskbar. Using this application, you can always load the MacOS operating system and make all the necessary settings for the keyboard and touchpad.

How to update Windows 10 on MacBook Pro

Even though you downloaded the latest version of Windows 10 from the official website, you should check if there are updates for it. This will provide you with the latest security and driver updates for your Intel Iris Pro graphics card. The update will also fix minor bugs and bugs. To update Windows 10:

  • Click on the Start Menu;
  • Click on “Options”. This icon looks like a gear and is located on the left side of the menu, above the power icon;
  • Select the “Update and Security” section;
  • Select “Windows Update”;
  • Click on the “Check for Updates” button;
  • After installing the updates, restart your MacBook Pro for them to take effect.