How to install Windows on a lenovo

OS disk

Of course, in order to boot a new OS on your computer, you need to have it on record. Ideally this should be licensed software but of course most users use pirated copies.

You can easily find a free version of the system with the keys on the Internet. To do this type in Google or go to the forums to get a link to download the file. The suitable version for the standard user is Home Premium.

If you already have a disk, you can skip to the second point, but if not, here’s how to burn OS to disk.

How to burn Windows to disk?

You will need a blank disc (DVD-R or DVD-RW). Next you need a program to write to that media. For example Nero. To write the file, proceed as follows:

  • Insert a blank disk into your drive;
  • Launch the program. Nero;
  • Press Browse and choose your downloaded Windows file;
  • Press “Open”;
  • Then set the burning parameters and wait.

Boot via BIOS

Booting from USB drive (flash drive) by changing BIOS boot priority is the best option when you need to unlock your PC with the Windows password recovery tool or fix boot problems like blue screen, no OS startup, etc.д.

    Connect the bootable USB stick to the USB port of the laptop.

Connect bootable USB stick to USB port of notebook

Refer to! It is preferable to connect the USB storage device to USB port 2.0, т.к. with USB port 3.0 may cause problems. USB Ports 3.0 are usually blue in the middle or lighter in color than USB 2 ports.0.


Using the down arrow go to “Legacy” select “USB HDD” and press “F5” and “F6” to put the USB stick on the first place

Use arrows to highlight “Boot Priority”, press “Enter” and set “Legacy First” instead of “UEFI First”, press “Enter

Help! If your hard drive has an MBR partition table (old style partitioning that works with partitions up to 2TB), setting “Boot Priority” to “UEFI First” may cause a Widnows.

Press “Esc” to go to the main BIOS menu, press “F10” or go to the tab “Exit

Phoenix. Award BIOS

If your laptop is installed Phoenix. Award BIOS, after the standard entry into the BIOS you must:

    Use the up and down arrows to select “Advanced BIOS Features” and go into it by pressing “Enter”.

Multiple installation paths

So, you can not enter the BIOS, and you already have some doubts about whether it is at all on Lenovo laptops. In fact there is, only it is organized slightly differently, and settings specifically for a particular model of computer you need your own. But some standard FnF10 command helps to enter BIOS.

In order for you to see that cherished Bios window open, you should slightly prepare your hardware. First, the installation disk is inserted into the drive of the switched on computer. In this case it is Windows 7. Then you must turn off the computer, unplug it and remove the battery. Yeah, it sounds funny, but it helps most of the time. So, after that return the battery to where it should be and turn on the laptop via the Novo button, which is next to the start button.

During the boot up process you will see that you have entered the service menu. There you select the “Diagnostics” tab. From there set “UEFI Software Options”. Your computer will then notify you with a short message that it needs to restart. If you follow the recommendations of your technician, then after the reboot the computer will go into BIOS by itself.

Next you should find the Security section, where you disable the SecuryBoot option. Then in the main menu, look for the Startup tab. Now you need to arrange the boot order of the drives, which will guide the system. To do this in the Boot tab find the hard drive of the computer (usually it is designated as ATAHDD) and using the “” key or the top arrow take the tab to the top. There may also be a problem that the tab does not come up. In that case it will work the other way around. let’s drop down to the bottom of the WindowBootManager tab. On the second place in the list should be the name “ATAPICD1”, and after it the parameter, which will be.

See also  Reset BIOS password on a laptop lenovo

After all these intricate manipulations, go back and look for the tab UEFI/LegacyBoot and select there the LegacyOnly option. Once you have saved with the F10 key, then you can start a standard reinstallation of the system.

Question from a user


Not so long ago I bought a Lenovo B70 laptop pre-installed with Windows 10. Honestly, I would like to reinstall the system, I prefer Windows 7. But my laptop stubbornly does not see the bootable flash drive, tried to create it in 2 different utilities. You might need to “turn” something in your BIOS to make it work.

How to install a new laptop with Windows 7, and whether it is possible? The driver on the manufacturer’s website for Windows 7 I saw.

I should note that even experienced users experience some difficulties when installing Windows 7 on new laptops. Most often, the problem is about drivers: they need to find and download from the manufacturer’s website, as the old ones that came with your laptop. won’t fit (they are for the new Windows 8/10)!

You may also have some difficulty writing a bootable flash drive and. Pretty much all of the above. solvable, about that all below.

In this article, by the way, I will review the process of installing Windows 7 on a Lenovo B70-80 laptop (for laptops of other brands and manufacturers. many of the steps will be similar, except that with the setting of BIOS will have to “deal” separately).

It is not necessary to remove and format the entire disk with its operating system Windows 10 to install Windows 7. I would even recommend just installing one more system, and choosing the one you want to use at boot (the menu with the choice of Windows OS at boot will appear automatically!).

  • First, you do not know how Windows 7 will behave, maybe Windows 10 will be more stable and perform better;
  • secondly you will have a more stable system: if something happens to one OS. You will be able to boot into the second one;
  • thirdly, some games and programs may not work on one of the systems while on the other one. all will be fine.

Basically if you do not plan to build yourself 2 OSs. you can skip this step. In this one I will tell you about disk partitioning.

To help!

Article about, (in Windows without installing any additional software)

To start, you will have to open (WinR key combination, and diskmgmt command.msc ).

Afterwards you right click on the disk partition you want, and choose the option “Compress Volume”.

Then specify the size of the compressed space (I specified 30000 MB in my example, which is about 30 GB).

And you will have one more partition. it is marked in black, and it says: ” Unallocated” ( note : the partition of the disk from which we have “stripped” some free space. (It is now 30 GB less than it used to be).

This partition is not usable yet, since it is not formatted. To format it. right-click on it, and select the.

  • the size of the simple volume (do not change anything at all). leave it by default, see. see the screenshot below);
  • drive letter. can also be left unchanged;
  • file system (NTFS). cluster size, volume name. You can also leave everything as default;
  • last step. agree with the settings and click “Done” (all the steps correspond to the numbers in the screenshot below).

Actually, now you should have another local disk. on it you can now copy files and folders and work just like with any other drive (this is where we will install Windows 7).

Basically, now we can proceed to preparing the bootable rescue media.

How to make a proper Ubuntu 15 bootable USB stick

For Ubuntu 15 you need to download from https://unetbootin.github.Using the UNetbootin utility. Launch the program, choose the options as shown in the screenshot below and press the OK button.

After that, it will start loading and writing files to the bootable flash drive, in this case it is drive D.

See also  How to take screenshots on Huawei

In the final window, you will be prompted to reboot your computer or laptop and boot from the flash drive.

Booting a Lenovo laptop from a USB storage device

There are two ways you can make your notebook boot from a USB stick.

  • Boot Menu (I recommend this method). With the help of this menu, we can tell our Lenovo laptop which device to boot from this particular time. Since we most likely need to start the notebook from a USB stick only once. This is enough to start the Windows installation, or perform other actions.
  • Through the BIOS menu. Here you need to change the boot order in the BIOS settings. Nothing complicated in principle. But I do not see the point in doing this, if you can select the device through the Boot Menu. Unless you can boot from the boot menu. A bit of a fallback.

In any case, first connect the flash drive to your laptop.

Preferably use a USB 2.0. FROM USB 3.0 there may be a problem. USB Port 3.0 port in the middle is usually blue, or lighter in color than USB 2.0.

Write Windows 10 to a flash drive or DVD to install on your laptop

First, we need to download a Windows 10 image. You can download it from the official website, or from other sources. You know what I mean. We need to have.iso image system. I have already written in a separate article in detail about how to download Windows 10 from the official Microsoft website. Using the same proprietary Media Creation Tool you can write the image directly to a USB stick.

Next, we need to select the drive from which we will perform the installation. If your laptop has a CD drive, and you have a blank DVD, you can burn the image to it. But I would advise you to use a USB stick for this. The difference, in principle, is not much. It is up to you what you like, and what is most suitable in your case.

To make this article as simple and straightforward as possible, without unnecessary information, I will just give links to instructions that you can easily create a bootable drive with the operating system for further installation:

Come back to this article when you have a bootable CD, or USB stick, ready to go.

If you are not installing on a new laptop make sure that your local C drive does not contain any information that is valuable to you. Including the My Documents folder and the desktop. Everything will be deleted from disk C only (assuming you choose the right partition for installation).

In order not to make a mistake in choosing the partition to install “ten”, go to “My Computer” and note the size and free space on the C drive. Then you can be guided by these numbers at the stage of selecting a partition for installation.

How to install Windows 7

Make sure the version you want to install is 64-bit. This is important because you simply will not find the necessary drivers for the 34-bit.

The manufacturer has set the boot sequence so that the operating system will boot only from the internal hard disk, so you must disable protection and change the settings in the BIOS.

To start the BIOS, you need to wait for 1-2 seconds after turning on the device or rebooting., When the Lenovo manufacturer’s logo appears on the screen, press the FnF2 key several times. It is important to be ready before the OS starts booting itself. The F12 key allows you to navigate between sections, and the / keys are used to change positions in the menu-. F5 and F6 are navigation between the items in the menu.

If you are interested in how to install Windows 7 on your laptop Lenovo Ideapad 100-15IBY, there is a key Novo to call the BIOS menu, the manufacturer emphasizes that the computer must be in this case, turn off.

Also notebook key combinations can differ, depending on the notebook model. You can do this by pressing Del, F2, or Esc key.

To get the settings we need in the BIOS choose BIOS Setup.

Next, let’s move on to Exit and set the parameters:

Go to the Boot menu and set the following settings:

We cancel the default boot priority and set the required settings, now need to go back to the Exit menu item and save. Saving Changes. Yes.

See also  WhatsApp on a tablet without a SIM card install

The external USB drive must already be connected to your laptop. Now enter the Boot Menu by pressing F12 or the Novo key and choose Boot Menu, which shows your device for the OS installation. It should be selected and then Windows will unpack the files by itself. Then we have to choose full installation.

Next, you need to partition the workspace using the “Create” button. Keep in mind that for the system, to work properly, it is better to leave at least 30 GB. When you have finished dividing all available space, you need to select the partition allocated to the system and click on install. Follow the instructions of the wizard, and you have a pleasant experience using the familiar interface!

Installing Windows from a USB stick

If the preparatory steps were successful, after the laptop reboots the Windows installer will appear on the screen. After it loads, confirm that you agree with all the clauses of the license agreement by ticking the appropriate box (as in the picture below) and clicking Next.

The unpacking process will take some time. You need to be patient, and then select the item “Complete installation”.

If your notebook hard disk was initially partitioned, and the file system was formatted in NTFS, everything is simple. Otherwise you will have to delete the hard disk partitions. Simply click on “Disk Configuration” and delete all partitions.

Now you can partition your free space yourself. Click on “Create”, choose the size of the partition you want and confirm your choice. This way until you have divided up all the available space.

Now click on the partition where you want to install Windows and get down to business, just follow the instructions that appear on the monitor. When installing Windows your notebook will reboot, do not be afraid of it, and do not interrupt the installation process in any way.

Reasons why your Lenovo laptop doesn’t see USB devices and ports don’t work.

Most often it is a faulty South Bridge is the reason why a Lenovo laptop does not see USB. In spite of the fact that it’s just a small chip, the southbridge performs a lot of important functions, among which is the proper functioning of the ports. It is really very easy to break the South Bridge. A single short circuit, which can be caused by spilled coffee or other liquid, would be enough. To restore the South Bridge is actually possible not in every case. As a rule, the chip has to be completely replaced. 2. If in Lenovo

one USB port is not working, most likely it is simply broken. As a rule, it happens as a result of improper use or when the device receives heavy mechanical damage. Quite often it is necessary to change it completely in order to make your Lenovo laptop work again. We make such repairs without problems.

Through the problems in the operating system Lenovo

The ports may also not work. First we advise to check the system for viruses. If you can not solve the problem yourself, we advise to come to our service center zsmoskovski, where you will help.

It is much less common for a Lenovo laptop not to see USB devices and a mouse

for other reasons. Usually if you can’t determine the fault without special equipment, we do a full diagnostic.

Is not working through the dust and dirt that collects there. In this case, in order to make the device work, it will be enough to conduct an external inspection and blow the connector with air or gently clean the available area with a brush.

An equally common case is when the contacts that come directly from the motherboard. Naturally they are inside the Lenovo IBM

The contacts may be damaged by pushing the flash drive or any other device.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE