How to Install Windows 10 on a Lenovo Laptop
The very first problem that you may encounter is persistent loading from the hard disk and ignoring the disk or flash drive inserted into the drive with the operating system distribution kit, for example, Windows XP / 7/10. This happens because the BIOS is not configured correctly, namely, the wrong boot order is specified. We need to first enter the BIOS setup. This is done at the initial stage of loading the laptop, a few seconds after turning it on, before loading FREE Dos.
The system will write that to enter BIOS (or SETUP), you must press the DEL key or one of the “F1-F12” buttons, usually F2 (depending on the model). On Lenovo G500 series models, you need to press the OneKey Recovery key when the laptop is off, and on some models, FnF2 (F12) works.
Next, we find the “Boot menu” and set the boot priority there. To do this, look for the inscription “First boot device”, go into it and select “CD \ DVD-Rom” from the list that appears. Sometimes the list of bootable devices is not offered, then just go to the position “CD \ DVD-Rom” and move it to the very top by pressing the \-.
To select a USB flash drive, you need to find it by the model name and also move it up. By the way, a USB flash drive can be located in a subsection of hard drives (Hard Drive, HDD). Then we just find an exit from the SETUP program. select “SAVE ALL and EXIT”. “Yes”. Or just the “F10” button. For a one-time boot from a flash drive, you can skip entering the BIOS, but instead press F9 and select the boot device from the menu:
For G500 series models, and in general, it is recommended to first reset all default settings (“Load Defaults”) and only then set the desired boot priority. Also check that on the “Startup” tab the value “UEFI / Legacy Boot” was in the “Legacy Only” state, otherwise the installer may not start.
How to reinstall Windows on a Lenovo laptop
Some Lenovo laptops are sold with a preinstalled free operating system FREE Dos123, which, to put it mildly :), is not suitable for work. Many owners of Lenovo laptops (and not only) are faced with the problem of self-installation of the operating system.
Some are wondering if a special version of Windows is needed for a laptop, as opposed to a personal computer? No, Windows is one for everyone, it is only important to choose the right version: XP or Seven / 10, depending on the configuration of your laptop or candy bar.
To install Windows 7/10, in most cases, it will be enough to know that you have at least two gigabytes of RAM, and for x64 versions you need 4GB or more. Another such moment, if a disk with drivers for Windows 7/10 was supplied with the laptop, and you, for any reason, need to install Windows XP, then before installing it you will have to download all drivers for this OS.
Next, we boot from the boot disk with the operating system distribution kit and follow the instructions of the installer. The procedure will be the same as installing on a regular computer. Also reinstalling is no different from installing. Only at the stage of selecting the target disk, you need to format it, i.e. erase old data. For more information, see my free video course “How to Install Windows 7”
Installing windows 10 from a USB flash drive on a lenovo laptop
How to install windows 10 from a flash drive to a lenovo laptop: new Lenovo laptops are often sold with a pre-installed operating system.
However, the OS selected by default does not always suit the owner and he asks himself how to reinstall windows on a lenovo laptop.
Downloading is possible both on a PC with a different operating system, and on a new one, where there was no system before.
Before reinstalling Windows on a Lenovo laptop using a USB flash drive, you must select a drive with at least 8 gigabytes and format it.
Installing Windows on a Lenovo laptop
To install the OS, you must do the following:
- Insert the USB flash drive into the device and reboot it.
- Windows will unpack the files for some time, after the process is complete, the program will offer the operating system to install. You must specify the Windows for which you have a license. To activate the OS, you need to enter the product key, or do it later. If there is a code, the key is activated automatically after connecting to the Internet. Click “Next”.
You should read the terms of the License Agreement and press the “Accept” button.
We indicate the type of installation:
The first point involves updating the system while maintaining the old operating system settings and files.
The second option is used to completely reinstall the system.
Choosing the most suitable hard disk partition for installing Windows.
If there are several of them, and there is an SSD, then it is better to choose an SSD drive, it is the most productive and works faster than HDD.
If you want to create several partitions within 1 hard disk, you need to delete all partitions, after which free space will appear.
After creating a new disk, you need to format it and press the “Next” button to start the installation process.
This procedure takes 10-15 minutes, after which the computer will automatically restart.
After rebooting the system, a window for setting parameters will be displayed on the screen. It is recommended to disable all these parameters. in order not to do this manually, you can click on the item “Use standard parameters”.
Specify the user’s region and configure the settings for connecting to the Internet.
Installing the OS on Lenovo should start by disabling BIOS protection.
To do this, you need to reboot the device and press the F2 key to open the BIOS menu. If the menu does not open, you can try to press Delete or use the FN button together with a key from the F group.
To disable protection, open the Security item, then Secure Boot by pressing the Enter key.
In Secure Boot, you must go to Disabled mode to disable protection.
You can return to the main menu by pressing Esc, then go to the Boot (Sturtap) section.
This section is responsible for configuring PC boot from a USB flash drive or CD.
- To use a flash drive, select and place at the top of the list using the / keys-
- In the UEFI / Legacy Boot section, select Legacy Only.
- Press F10 and save changes with Enter.
How to install windows 10 from a flash drive on a lenovo laptop
How to create a bootable windows 10 flash drive with ultraiso
To prepare a bootable flash drive, you need to download the UltraIso program from the official website.
Next, the downloaded program is launched, following the manufacturer’s recommendations.
During installation, you must select the media by specifying the USB device.
After the program is fully loaded, you can run the ISO image:
File-Open. Select a Windows 10 disk image.
In the “Boot” section, go to the “Burn hard disk image” section
After pressing the “Write” button, a window appears with a proposal to delete all data from the drive, you should click “Yes”.
Resetting BIOS settings to their original state
To avoid starting a new system installation, when using this flash drive, you must restore the old BIOS settings. To do this, you need to restart the computer and enter the BIOS menu in the same way that was used earlier to disable protection.
If Windows was downloaded from the official site, all updates should be installed automatically. You can check for all updates using the free DriverPack Solution program.
Self-installation of the operating system is not as difficult as it seems. Even a novice user who does not know how to reinstall windows on a lenovo laptop can cope with it by following the simple recommendations specified in the text.
In the article, we have analyzed how to install windows 10 from a flash drive on a lenovo laptop.
Installing Windows 10 on an ASUS laptop
Creating a bootable USB drive
To work, you need the Rufus utility and a boot image with Windows 10.
And so, insert the USB flash drive and launch Rufus (Important! All data on the USB flash drive will be deleted, so copy everything you need from it). Next, specify the ISO image (recommended for installation above), then select the option “GPT for computers with UEFI interface” (file system. FAT 32), “Standard Windows installation”
Press the “Start” button (the settings are shown in the screenshot below)
Next, specify the ISO image (recommended for installation above), then select the option “GPT for computers with UEFI interface” (file system. FAT 32), “Standard Windows installation”. Press the “Start” button (the settings are shown in the screenshot below).
Rufus 2.1 settings
Update from 01/24/2019 (since the Rufus program has been somewhat updated, and its design has changed. I will give one more screen for version 3.4 so that no one gets confused).
Rufus. creating a USB flash drive for UEFI (GPT)
In general, the flash drive is ready, you can move on.
Loading the optimal settings in the BIOS. enter the boot menu.
BIOS settings are not always set by default (default). Therefore, first of all, I recommend going into the BIOS and restoring them.
By the way, you can immediately connect the bootable USB flash drive created in the previous step. I recommend connecting to a USB 3.1 port (installation will be faster, especially if your flash drive supports this standard).
We connect the flash drive to the USB 3.1 port
To enter the BIOS, immediately after turning on the laptop (the ASUS logo should appear) press the F2 key (preferably several times, to be sure.).
In BIOS (UEFI). first of all go to Advanced Mode (F7 key). see the bottom of the window.
Advanced Mode (F7 key)
In the Save Exit section, select the Restore Defaults option. Then save the changes. the “Save Changes” button (you can just press the F10 button. after which all changes will be saved and the laptop will go to reboot. enter the BIOS again with the F2 key).
Restore Defaults. restore the default settings
After restoring the settings, entering the main BIOS (UEFI) window again, press the F8 button (enter the Boot Menu). In it you should see our USB flash drive. select it and press Enter.
Boot Menu. select bootable media
Next, the laptop must start installing Windows. a “circle” should run in the center of the screen.
If the installation does not work. check if you wrote down the installation USB drive correctly and set the UEFI settings.
Windows 10 setup process
The first window is a greeting with a choice of language (I omitted it, just press Enter). In the next window. click the “Install” button.
Next, a window will appear with the terms of the license. agree and click “next”.
In the window with the choice of installation option, select “Custom: Windows installation only (for advanced users)”.
deleting all partitions on the hard drive
After that, you can create one partition on the entire disk and install it into it (some recommend creating two partitions. one for installing Windows, the other for user data). If you create two partitions, then for Windows I recommend allocating space for at least 100 GB.
In my case, I just created one partition for the entire disk (931.5 GB) and clicked “Next”.
Create a Windows partition
By the way, if at this step you see an error that “Windows cannot be installed on this disk.” (see the screen below), then you most likely created the bootable USB flash drive incorrectly (see the first part of this article). It is also possible that you downloaded an “incorrect” ISO image with the system.
error about the impossibility of installation
Actually, if all is well, the installation of Windows should begin. Here you just need to wait while the files are copied (if you connected a flash drive to USB 3.1, then wait not long, 5-6 minutes).
File copying started
When the files are copied, the laptop will reboot and the installation will continue. Several windows will appear in front of you: but there is nothing interesting in them, you will need to enter a username, set the network settings (you can also skip all the steps and do it after). I lowered all these windows, because They are of no practical interest, and I think that everyone will cope with them on their own.
But to be honest, just in case I also resorted to Drive Booster and for extra. 5 minutes I updated not only the drivers, but also all sorts of libraries: DirectX, Visual C, Net FrameWork, etc. (without going anywhere and without looking for anything
Installing Windows 10
As soon as everything is ready to install Windows 10 and the installer starts. We again accept the License Agreement, after which the program will once again check for updates and, if any, download them to the computer.
After that, a window will open, where the version of Windows that is installed on the computer will be determined. It is also suggested to save user files, where three options are offered:
- Save personal files and apps
- Keep only personal files
- Save nothing
Select the desired item depending on your preference. I would prefer a clean install, because it is the programs and applications that could cause the computer to crash. Therefore, it will be correct to remove everything and install the system from scratch.
However, before reinstalling Windows 10, you need to back up your important files. See the article: How to back up your files. And so, select the last item and click “Next”. The system will check for free space. and prompts you to start the installation process.
During reinstallation of Windows 10, the system will reboot several times, and your intervention is not required. After a while, our participation will be needed, where we will have to specify the Region, Language, Keyboard Layout Language and Time Zone.
Here we will be offered to create a PIN-code, also at will, if you create a PIN-code, then press the appropriate button. If not, then “Skip this step”.
In the next step, we are asked to set up OneDrive. The default is Save new files to PC only. We, however, are invited here to save in the cloud storage, all personal documents and images from standard folders. The option is of course dubious, but if desired, you can configure it later.
Then you will need to wait for the system to adjust, it will take a long time. When everything is ready, we will see the familiar Windows 10 desktop. The installation process is not over yet, and what steps still need to be taken, we will talk in the next article.
Different versions of Windows 10
Like other operating systems from Microsoft, Windows 10 comes in different versions. It is worth choosing a system based on the installation goals. It is worth understanding the difference between the main versions:
- Windows 10 Home is the most basic edition of Windows 10. It contains everything you need to use the system at home, but it is very limited in other functions. Let’s say it doesn’t even have control over which updates should be installed. Nevertheless, what is offered in this version is quite sufficient for private use;
- Windows 10 Professional is a more advanced version. It contains all the functions of the home version, and also allows you to configure the system in more detail. With some advanced features and advanced security features in it, this system is ideal for power users and small business owners;
- Windows 10 Enterprise. this version is designed for the largest corporations and that says it all. Great emphasis on data protection, communication between computers in a single network and many convenient opportunities for doing large business. For ordinary users, the capabilities of this system will be superfluous;
- Windows 10 Education is the latest “major” version of the operating system for educational institutions. Not too different from the Enterprise version, except that it has a better price and does not contain a number of business solutions;
- Windows 10 Mobile is the only version for mobile phones and tablets. It has been actively developing since the release and now it is a very good solution, only now it is supported by too few devices.
It turns out that it is not at all difficult to navigate among all versions. If you are an experienced user, then the Professional version is your choice. Home is fine too, albeit a bit stripped down. Well, for installation on mobile devices, only Windows 10 Mobile is suitable.
In most cases, ASUS notebooks enable and disable the function keys by using the following combinations:
Try using the indicated keyboard shortcuts while checking the functionality of “Fn”.
How to fix readycomm.exe
A clean and tidy computer is one of the best ways to avoid problems with Lenovo ReadyComm 5. This means performing malware scans, cleaning your hard drive cleanmgr and SFC / SCANNOW, removing unnecessary programs, monitoring any startup programs (using msconfig), and enabling automatic updates. Windows. Remember to always make regular backups or at least define recovery points.
If you have a more serious problem, try to remember the last thing you did, or the last thing you set before the problem. Use the resmon command to identify the processes causing your problem. Even in case of serious problems, instead of reinstalling Windows, you should try to repair your installation or, in the case of Windows 8, by executing the command DISM.exe / Online / Cleanup-Image / Restore Health.This allows you to restore the operating system without losing data.
Lack of drivers
Most often, the main reason for the inoperability of the “Fn” key on an ASUS laptop is the lack of suitable drivers. This may be due to the installation of an unsupported operating system, or a system failure.
In a situation with drivers from another system, there should be no errors. Otherwise, try installing the package in compatibility mode.
Additionally, you can download and install the “ASUS Smart Gesture” driver in the same section on the official ASUS website.
- On the previously opened page, find the “Pointing Divice” block and, if necessary, expand it.
From the list, select the latest available driver version “ASUS Smart Gesture (Touchpad Driver)” and click the “Download” button.
With this archive, you need to do the same as with the main driver.
Now all that remains is to restart the laptop and check the functionality of “Fn”.
If none of the sections of this manual helped you with fixing the problem, the cause of the problem may be a broken keyboard or specifically the “Fn” key. In this case, you can resort to cleaning and checking the connection contacts.
Read more: How to remove the keyboard from an ASUS laptop How to clean the keyboard at home
Fatal injuries are also possible, for example due to physical impact. The problem can be solved only by completely replacing the keyboard with a new one, depending on the laptop model.
Fn key does not work on ASUS laptop
The most common cause of Fn key problems is a recent reinstallation of the operating system. However, in addition to this, there may be malfunctions of drivers or physical damage to buttons and the keyboard as a whole.
Quick installation of Windows 10
Contrary to popular belief that the process of installing an operating system is long and tedious, this is not entirely true, especially if you are using an SSD. Connect a bootable disk or USB flash drive to your laptop and press the power key to turn it on.
Note: The process of installing Windows on a mobile PC is not very different from a similar process on a stationary PC. Some points can be swapped, however, you will get a clear idea of your next steps.
You will be greeted by the Windows Installation Wizard. Enter your geolocation and confirm that the selected keyboard layout is correct.
At this stage, the installer will offer to connect to the wireless network. We recommend that you complete this step, as in this case Windows may involve fresh additions in the installation process. Nonetheless. if you do not have Wi-Fi or for some reason you do not want to connect to the network immediately, you can skip the item.
Wait until the operating system installer completes the quick settings and read the license agreement, which, of course, no one will read :).
Computer control circuit
Now Windows will offer to choose exactly how you plan to use the operating system: for personal use or for managing an organization. We recommend choosing the first option.
This step will require you to log in with your Microsoft account. If you have not created it before, register. Those who have an account from the days of older versions of Windows can get personalized OS settings according to the old data. This is a great way to save some time when setting up a new computer.
If you use this account protection, you will need to enter a text code after entering your account password. Perhaps you think this is unnecessary and just a waste of time. However, such a slight inconvenience allows you to significantly protect yourself and your data.
Face recognition function
If you are the proud owner of a laptop that supports Windows Hello, the installer will prompt you to customize it. It will enable the face recognition service to simplify registration in the operating system.
A simple yet effective way to keep your data safe. Enter the PIN that will be required to authorize the user.
At this point, Microsoft will offer you personal privacy settings. As a rule, I don’t bother with geolocation and other tracking features, however some users don’t like them. You can always enable or disable them if you want.
Wait for the installation process to complete.
Is your laptop ready for Windows 10?
This will be reported by a special utility that you can find on the support page. The general requirements are as follows.
- Screen with a resolution of 800 × 600 pixels.
- About 20 GB of disk space.
- At least 1 GB for 32-bit or 2 GB for Windows 10 64-bit RAM.
- Video card that understands DirectX version 9 or higher.
- or less modern processor with a frequency of 1 GHz or higher.
- PAE, NX and SSE2 support
Installing Windows 10 on a laptop: step by step instructions
Better to start by visiting a special page dedicated to Windows 10, posted on the official Microsoft website. Everything you need to install is collected here.
Experts advise against using third-party utilities of dubious origin. over, this time Microsoft specialists really prepared well, and their utilities are reliable and easy to use.
How to install Windows 10?
Windows 10 left the Technical Preview in August. Now not only enthusiasts and technicians can use it. The new operating system is better and more convenient than all previous versions of “windows”. Anyway, at the moment. However, many users are wondering “is it worth installing Windows 10 on your laptop?” The alternative for them is to stay on the previous stable version. In this article, we will reveal the benefits of using the new product from Microsoft, as well as explain in detail and step by step how to install Windows 10 on a laptop.
Benefits of using Windows 10
Let’s try to answer the most important question: is it worth installing a fresh version of the operating system from Microsoft? You will not find any stunning or revolutionary innovations compared to 8.1. However, in every component the operating system has improved both in speed and controllability. Here are just five points that any laptop user might be interested in.
- The most important news for everyone who has taken hostility to the “tiles” of the eighth version. the return of the familiar desktop “Start” menu. It has become much smarter and more convenient to use. To run any program, you just need to type the first couple of letters of its name. Live tiles are still there, they have moved to the Start menu bar.
- Significantly improved Mail and Calendar application will finally allow you to fully work with mail in standard Windows applications.
- New Edge browser is much faster and smarter than its slow predecessor IE.
- The setup menu became clear to the user. A short list of the main points, provided with clear large pictograms. But the main achievement is a convenient search for settings. Just write what you need and get an approximate list of settings that will help you.
- Thought over and improved file synchronization with OneDrive cloud storage and smartphones under all popular mobile OS.
And this is not a complete list of all the updates and innovations. So let’s start installing. A step-by-step guide will help you understand all the main points of this process and do everything yourself.
How long does it take to install Windows 10?
It all depends on the speed of your Internet connection and the storage system. The process takes place fastest on an SSD drive, and takes a maximum of 30 minutes. On older laptops with a conventional 5400 rpm HDD, you need to prepare for an hour of inaccessibility of the device during the update, or even more.
What’s the best way to install Windows 10 on a laptop? How to install Windows 10 from a flash drive or DVD?
To install Windows 10 from a USB flash drive or disk, you need a system image that can be downloaded from the above support page of the official website. There you will also find a utility for writing an image to a flash drive. Click on the Download tool now button, after selecting the version: 32 or 64 bit.
The program is called Media Creation Tool.
- In Media Creation Tools, select the desired action: install Windows 10 on your laptop right now or create a bootable USB flash drive.
- In the next window, decide on the OS edition, language and bit depth. The choice of bit depth is related to the capabilities of the processor. But even if the central chip is capable of supporting 64-bit computing, but the memory is less than 4 GB, then you can opt for the 32-bit version. There won’t be much sense in switching to 64-bit.
- Specify the type of media for recording the image: a flash drive with a size of at least 4 GB or a DVD disc. Most portable laptops do not have a DVD drive, so there are not many alternatives.
- After capturing the image, restart your laptop. If the boot from the flash drive does not start, then configure the order of devices to boot in the laptop BIOS. How to enter BIOS, read our article.
Important notes about installing and using Windows 10 on a laptop
In this new version of Microsoft’s operating system, keep in mind the following features.
- Windows 10 separates the concept of applications and user data even more clearly than in the G8. Never place your documents and photos on the system drive. If you ever need to perform a full system reset, they can be removed. But the system also recovers completely, even if system files and applications are damaged.
- An Internet connection is required throughout the installation of Windows 10 on a laptop to download important update files and device drivers.
- When installing “tens” on an old laptop, released more than five years ago, make sure that there are drivers for this version of the OS for all devices in the laptop. For example, while support for some sound cards is limited.
- The installation disc or flash drive can be left in case of system recovery after a serious failure. But this happens very rarely. Therefore, most users do not save the recovery disc. You can always make a new one.
- It is not recommended to use pirated distributions for installation. Your laptop’s operating system needs constant updating, which is not guaranteed by a pirated installation kit.
- After installing Windows 10 on the laptop, it will not be superfluous to install an antivirus. Many free programs: AVG, Avast, for example, have already released their versions under the top ten.
Should you install Windows 10 on your laptop? The answer is yes. The laptop will run faster, and you will get new applications and an easier-to-manage OS. To be honest, there isn’t much to customize. This is the first version of the OS that works great out of the box.