How to go online on iPhone
Set up on other iPhone models
On new versions of famous phones, you can change the APN parameters, if it is not prohibited by the mobile data operator, according to the following instructions:
- Go to the settings app from the main menu.
- Select the item “Cellular” or “Cellular data”.
- Go to the sub-item “Data parameters”.
- Click on “Cellular network” or “Cellular data network”.
- Enter specific values in each of the fields provided by the service provider.
- Save them and restart the device.
Important! Not all available fields need to be filled in. If the operator requires filling in only three (which is most likely) values, then only them are entered, without changing the contents of other text fields.
The correct settings will help you turn on the Internet
How to set up Internet on iPhone 6
On the sixth model, the setting is as follows:
- Open the phone menu and find the settings icon.
- Select the “Cellular” section and the “Cellular data transmission network” subsection.
- Specify for the new access point exactly the same parameters as in the previous case.
- Save and restart the device.
How to set up Internet on iPhone 4
To set up mobile Internet on iPhone 4, you need:
- Go to the “Settings” menu.
- Select the “Basic” section and the “Network” subsection.
- It will contain the parameter “Cellular data network”.
- You need to create a new connection and provide APN details, username and password. It depends on the selected mobile data carrier.
Note! After setting all the parameters, you must carefully check them, save and restart the iPhone. If the Internet does not appear, then it is recommended to contact the operator for help.
How to set up Internet on iPhone 5 and 5s
The step-by-step instructions for setting up the Network in the fifth model looks like this:
- Go to the menu and select “Settings”.
- Enter the “Cellular” section and the “Cellular data” subsection.
- Select “Configure APN” and specify the values of APN, username and password.
- Save hotspot and reboot phone.
The quick access curtain is a useful thing, as it allows you to turn on the Internet
How to set up Internet on iPhone 7
The seventh iPhones are equipped with version 10 of the iOS operating system, for which the following step-by-step instructions are provided:
- Open the main menu of the smartphone and go to the “Settings” application.
- Find the section “Cellular” and go to it.
- Then go to the subsection “Data parameters” and the sub-item “Cellular data network”.
- Create a new access point with the same parameters: APN, username and password from services.
- Save and reboot the device.
What is network connection on iPhone
A network connection on Apple devices is a regular connection to a local or, more often, a global network using the built-in tools of the gadget. It is inherent in all modern phones, since it is because of this function that they are most often bought. They make your time on the Internet more comfortable and convenient. No need to connect any wires and sit in the same room, I use Wi-Fi.
The main purpose of modern phones is to connect to the Network
Despite the quality of Apple phones, they often have problems with accessing the Internet, which not everyone can solve on their own. That is why the following sections describe in detail how to access the Internet on an iPhone and what you need to do.
One way to connect is a Wi-Fi hotspot
How to turn on the Internet on iPhone. description of ways to get online
The Internet has become an integral part of every person’s life. With its help, they study, educate themselves and work. Almost no modern person imagines his life without daily correspondence, watching TV series online and searching for the information he needs. Not only computers and laptops can provide access to the global network. All modern phones can do this. For this, they are bought. Being online with their help can continue everywhere: in the subway, on the street and even in nature. Unfortunately, it is not always possible to set up the Internet on your own, even on expensive phones like the iPhone. This article will tell you what a network connection is on an iPhone, how to turn on the Internet on an iPhone of one model or another, and because of which you often cannot go online.
Setting up Internet on iPhone
The setting is different depending on the smartphone model. The changes to the instructions are minor, though, but it’s worth considering separate step-by-step lists for the popular iPhone 4, iPhone 5 and 5s, iPhone 6, iPhone 7 and newer models. Below these instructions will be presented.
Procedure for setting up iPhone sync with iTunes via WI-FI
If you are using a device with iOS 10 and higher (at the moment this applies to almost all modern Apple gadgets), then you can sync the iPhone using Wi-Fi. To do this, you must have:
- iPhone running iOS 10 or higher.
- iTunes on work computer version 10.6 or higher.
- Computer and phone must be connected to the same Wi-Fi network.
You do not know how to solve a problem in the operation of your gadget and you need expert advice?
- You need to start syncing your iPhone wirelessly using a cable. To start a wireless connection, you need to change the settings in the iTunes application. First, we connect the iPhone to the computer using the USB interface in the traditional way for synchronization.
- On the smartphone control screen, which will be displayed as a part of the standard process, the “Options” section will be located at the bottom (may have the name “Parameters”). In this window, select “Synchronize with this iPhone via Wi-Fi”. Then click on the “Apply” button in the lower right corner to change the settings.
- Disconnect the iPhone from the computer. Click on the arrow next to the device icon in the upper left corner of the iTunes application.
This type of Internet access is provided by a mobile operator at your chosen tariff. Before turning on, make sure that the service has been paid for and you can go online. This can be found using the operator’s hot mowing line or by downloading the proprietary application from the App Store.
- Go to the “Settings” of your smartphone.
To enable mobile Internet access, set the position of the “Cellular data” slider as shown in the screenshot.
Going down the list below, it will become clear that for some applications you can turn on the transmission of cellular data, and for others. turn it off. For this, the position of the slider must be as indicated below, i.e. highlighted in green. Unfortunately, this can only be done for standard iOS applications.
You can switch between different types of mobile communication in the “Data settings”.
In this window, select the option you need. Make sure there is a jackdaw icon on the right. Please note that by choosing a 2G connection, the iPhone owner can do one thing: either surf in the browser, or answer incoming calls. Alas, this cannot be done at the same time. Therefore, this option is only suitable for those who want to conserve battery power.
You cannot turn off mobile Internet in the Control Panel on an iPhone with iOS version 10 and below. The only option is to turn on airplane mode. Read about how to do this in the next article on our website.
Read more: How to disable LTE / 3G on iPhone
But if the device has iOS 11 or higher, swipe up and find a special icon. When it is green, the connection is active, if it is gray, the Internet is off.
- Follow Steps 1-2 from Option 2 above.
- Click Data Options.
Go to the section “Cellular data network”.
In the window that opens, you can change the parameters of the cellular network connection. When configuring, the following fields are subject to change: “APN”, “Username”, “Password”. You can find out these data from your mobile operator using SMS or by calling support.
A wireless connection allows you to connect to the Internet, even if you do not have a SIM card or the service from a cellular operator has not been paid for. You can enable it both in the settings and in the quick access panel.
Please note that by turning on airplane mode, you will automatically turn off mobile Internet and Wi-Fi. How to turn it off, read the next article in Method 2
- Go to the settings of your device.
Move the indicated slider to the right to enable the wireless network.
Select the network you want to connect to. Click on it. If it is password protected, enter it in the pop-up window. After successful connection, the password will no longer be asked.
Here you can also activate the function of automatic connection to known networks.
Enabling in Control Panel
- Swipe up from the bottom of the screen to open the Control Panel. Or, if you have iOS 11 or higher, swipe down from the top of the screen.
- Activate Wi-Fi internet by clicking on the special icon. Blue means the function is enabled, gray means disabled.
On OS versions 11 and higher, wireless Internet access is disabled only for a while, in order to disable Wi-Fi for a long period, you should use Option 1.
No network, search or what to do when the iPhone does not see the operator’s SIM card while roaming abroad
If you have ever traveled abroad with your iPhone, you may have encountered this problem. You turned off your smartphone during the flight, and when you turned it on, your device does not connect to the cellular network, but displays the message “No network”. What to do?
The Apple Support Forum has a corresponding discussion thread with a million pages to read. But even if you honestly start reading everything in order to figure it out, you will not get an answer to your question even after a few hours of careful reading.
The system message “No network” (Searching for a network) appears when your iPhone or iPad (yes, the problem is also relevant for “apple” tablets) cannot connect to it, or connects to the operator, but cannot establish a connection with any Internet or cellular network. You can even see the name of the operator who serves you. but then it will disappear anyway.
This error can have several reasons at once. But first, the most common and simplest of them should be excluded. And anyone can do it.
Restart iPhone and router
You can restart your iPhone as follows:
- Get to the desktop of the device by pressing the screen power button.
- Press the “Home” and power-on buttons at the same time and hold for a few seconds.
- Wait for the Apple logo to appear. If “Apple” is shown on the display, then the phone has started to reboot. The user will have to wait a bit until the desktop appears. After that, you need to try again to connect to the Wi-Fi access point and check if the system failure has been eliminated.
Reboot the router as follows:
- Examine the back side of the device, on which the connectors for connecting wires are located.
- Press the power button of the router, thereby turning off the device.
- Wait a few seconds and turn the router back on.
- Make sure iPhone can be connected.
As we found out, if there is a button on the router, you don’t need to make any settings, everything works right away, out of the box. Except for D-Link routers where this feature is disabled by default.
To enable and configure WPS on your router, you need to log into the web interface of your router. How to do this is described in the instructions for a specific model. Depending on the model and firmware version, the WPS settings can be highlighted in a separate item or located in the wireless network settings menu. In any case, they are extremely simple. As a rule, there are only two or three points here.
The first one is, in fact, this is the activation or deactivation of the function. To enable WPS, check the box or switch to ON or Enabled depending on the router model.
The photo below shows an example of WPS settings on a TP-Link router, in this case the setting in the menu is displayed as “QSS function”.
WPS software connection is carried out using a PIN-code. It is indicated on a label on the bottom of the router. This is usually eight digits. It can also be viewed in the WPS settings in the web interface. Here you can also enable, disable, generate a new PIN-code or restore the old one.
The PIN is the password you need to enter when connecting via WPS. That is, if the router does not have a hardware button, the connection procedure becomes more complicated. In fact, it is identical to a regular connection to a wireless network. you need to enter a password on each client device.
You can disable the PIN code, and then devices in the range of the router will be able to connect automatically. This is acceptable if you live in a private house and your nearest neighbors are outside the coverage area of your network. If you use the Internet in an apartment building or in an office, it is not safe to disconnect the PIN code. anyone can connect to your network.
Of course, in order to use WPS, Wi-Fi must be configured. Go to the wireless settings
Here you should pay attention to the following points:
- Network name. we set the name by which our network will be displayed in the list of available networks.
- Turn on the wireless broadcast of the router. that is, turn on Wi-Fi.
- Turn on broadcast SSID. This is so that the name of our network is displayed in the list of available for connection.
- Don’t forget to save your settings.
This function is available in OS Windows Vista, Windows 7 and higher. It is missing in older versions. To use it, you will need additional drivers or special software.
If all else fails
If all of the above methods did not help to restore the Internet connection to the iPhone, then you can try to connect to the Internet from a personal computer with a built-in Wi-Fi module.
Before you start, it’s best to make sure that this module works. This can be done as follows:
You need to go to the “start” menu on your computer and find the “control panel” section there; Next, the user should select the “Network and Sharing Center” section and go to the menu to manage networks
Next, you need to select a computer-to-computer connection and enter a name and create a password;
It is very important not to click on the button to enable sharing; Now you need to go to the “network connections” section and select the created network; At this stage, you need to put two checkboxes, and when you first connect via the network, select the connection type. Home. The user just needs to turn on Wi-Fi on his iPhone and connect to the network
The user just needs to turn on Wi-Fi on his iPhone and connect to the network.
In addition, you need to make sure that the device has not been mechanically damaged. As a result of a strong blow or water ingress, the network module, which controls the connections in the gadget, could fail. In this case, the owner will not be able to do without the help of a master, who will have to turn to.
How to enable mobile Internet and data transfer on iPhone
How to open a PDF file on Android. a description of all the ways
With Apple gadgets, usually there are no problems with this setup. You can enable the transfer of mobile data over the Web in the quick access curtain, which is called by swiping across the screen from its uppermost part (where the notification line is located) to the lower one. Among other items, there will be a mobile data transfer icon. If it is inactive, then you should click on it, and it will be painted in a bright color. This will mean that the mobile Internet on the iPhone is turned on.
Exactly the same actions can be performed in the device settings. For this:
- Go to the menu and find the item “Settings”.
- Select the section “Cellular”.
- Toggle the “Cellular Data” slider to the “On” position (it should turn green).
How to turn on mobile Internet on iPhone: solving connection problems
Hello everyone! Today we will consider the question. how to enable and configure the Internet on the iPhone. This can be done in two ways: using mobile access (3G / 4G / 5G / LTE) or via Wi-Fi. Let’s consider both options. If you have any questions or something goes wrong. write in the Комментарии и мнения владельцев.
NOTE! The manual is suitable for all known iPhone models: 4, 4S, 5, 5C, 5S, 6, 6 Plus, SE, 7, 7Plus, 8, 8Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max. SE and later models.
ATTENTION! The phone must have a valid prepaid SIM card, which includes a package for accessing the global network. If you do not have a SIM card yet, then contact any current operator: MTS, Megafon, Yota, Beeline, Tele2, etc.
Open the “Shutter” menu. to do this, on the main screen, swipe up with your finger. Next, you need to click on the button with the antenna image.
NOTE! If you are using mobile internet, turn off Wi-Fi.
Also, the mobile Internet on the iPhone is turned on elsewhere:
- Go to “Settings”.
- Go to the “Cellular” section.
You do not need to do anything else, the data transfer settings for the mobile Internet are configured automatically. Then you can surf the internet. If you have any difficulties with connection, then first of all look at the balance of your personal account. You can also call your provider’s tech support phone number. You can access the Internet through the standard Safari browser.
- Turn on the function by moving the slider to the right.
- Wireless networks will be displayed below. select the desired one and enter the password for connection (if any).
- At the top you will see a connection icon.
NOTE! If the mobile global network and WI-FI are turned on at the same time, then the connection will be made to the wireless Wi-Fi network.
Let me remind you that you can also share the internet with each other. That is, one phone connects to the global network, then it switches to the “Access Points” mode and distributes the Internet via Wi-Fi. Instructions for enabling this mode. read here.
Problems with mobile connection
If the mobile Internet does not work, then we try the following steps:
- Unplug and unplug your phone.
- Try reconnecting to mobile internet.
- Look at the icon at the top of the phone. perhaps the connection does not work, because you are far from the tower: for example, you are outside the city or in the forest.
- Check the balance on the account, it may need to be replenished.
- Go to “Settings”, find the subsection “General” and then go to “Reset”. You need to find the button to reset network settings and click on it.
- We call the operator on the hot line mowing line.
Go to the “Wi-Fi” section in the settings and check again that you have correctly connected to the wireless network, perhaps you entered the password incorrectly and the connection did not occur. Go to your router and reboot it by double-clicking the power button. It can also be restarted by unplugging and inserting the power supply.
How to set up Internet on iPhone?
SIM cards of most mobile operators are sold with a connected mobile Internet: the user just needs to install the card in his iPhone, and access to the network will immediately be available to him. However, it is still necessary to know how to configure the Internet on the iPhone manually, otherwise, in the event of a system failure and deleting the network settings, the user will be left without access to a significant number of functions. neither checking mail, nor downloading applications from the AppStore will be available to him.
How to turn on mobile internet on iPhone?
First of all, you need to clarify whether data transfer is activated in the iPhone settings. To do this, go to the “Cellular” section in the “Settings” menu.
Then check the two sliders “Cellular Data” and “Enable 3G”. Both must be in active position.
If the “Cellular Data” toggle switch is not turned on, the iPhone will be able to access the Internet only if it is present in the Wi-Fi distribution area. Turning on 3G is also highly recommended. otherwise the smartphone will use the EDGE standard. The maximum download speed that can be achieved when connected to EDGE is 474 Kb / s, but you should count on 50 Kb / s. Needless to say, this is too slow internet?
Even if you switched the “Enable 3G” slider to the active position, this is not a guarantee that the gadget will work exactly via 3G. It all depends on the coverage area: if in the area where the iPhone is located, the connection is poorly received, most likely you will have to deal with EDGE.
It is very easy to find out which standard the data is transmitted through. just look at the top of the screen. Operator name can have one of two icons: 3G or E.
The second is evidence of data transfer via EDGE. Therefore, the letter E horrifies all lovers of fast Internet surfing.
If there is neither 3G nor E in front of the provider’s name, then the mobile Internet is not available. There are two possible reasons for the lack of a network: either the “Cellular data” slider in the settings is turned off, or the coverage is very weak.
After you check the toggle switches, you need to clarify whether the mobile connection settings are entered correctly. This is done like this:
In the same section “Cellular”, scroll down, find the subsection “Cellular data communications” and go to it.
Pay attention to the “Cellular Data” block. 3 fields must be filled in here: APN, username, password.
The following parameter values are valid for leading operators:
How to connect a computer to the Internet via iPhone: a common way
Most often, users connect their PCs to iPhones via Wi-Fi. We will not describe this method in detail. there is an article on our site dedicated to him alone. Let’s tell only in a nutshell: the iPhone owner needs to find the “Modem Mode” section in the “Settings” section and activate the toggle switch of the same name.
Then the user should change to the PC and click on the network icon, which is located in the taskbar.
Next, you need to find your device in the list of wireless network connections and connect to it.
How to provide a PC with Internet via a USB cable?
You can distribute the Internet from iPhone to computer via USB as follows:
Toggle the Hotspot slider in iPhone Settings to the active position. You will see a window like this:
Connect the gadget to the PC with a USB cable. A blue bar will appear at the top of the iPhone screen. a sure sign that the 2 devices are paired.
On a PC, go to the “Network and Sharing Center”, then go to the section “Change adapter settings”.
You will see that in the list of network connections there is a new local area connection named as a mobile device.
Try going online. You will find that when connected via USB, data downloads are even faster than via Wi-Fi.
Connecting a PC to a gadget via USB has another advantage: iPhone battery power is consumed to a much lesser extent.
How to connect a computer to the Internet via an iPhone?
Everyone knows that you can organize the distribution of Wi-Fi from the iPhone. But this way of “sharing” the Internet is not the only one; there are even more effective ones. In the article, we will describe in detail each of the possible methods.
IPhones of the latest modifications can fully replace laptops and stationary PCs. However, some operations are simply inconvenient to perform on mobile gadgets. For example, when reading blog articles from a large laptop screen, the user strains his eyes to a much lesser extent than when trying to make out letters on a small gadget display.
Fortunately, Apple developers have endowed iPhones with the ability to distribute mobile internet. After organizing the distribution, the user can connect the PC to the Internet and continue to carry out their tasks on a device with a more comfortable keyboard and a larger screen. There are several ways to connect a computer to the Internet via an iPhone: the user can choose which one is most convenient for him.
How to use Bluetooth to connect your computer to the Internet?
You can also connect an iPhone to a laptop to distribute the Internet via Bluetooth. This is done as follows:
Go to the “Bluetooth” section in the “Settings” iPhone.
GOOGLE PLAY STORE iOS/iPhone DOWNLOAD. How to Download Google Play Store on iOS,iPhone & iPad
Switch the toggle switch “Bluetooth” to the active position.
iPhone starts searching for devices to pair with.
Activate Bluetooth on your PC. If the laptop is equipped with the appropriate module, the wireless adapter icon will be in the system tray (at the bottom right of the screen).
Click on the Bluetooth icon with the right mouse button and select “Open Options”.
In the “Bluetooth Settings” section, check the box next to “Allow Bluetooth devices to find this computer”.
Once again click on the Bluetooth icon in the system tray and in the menu that appears, select the option “Add device”.
This will start the search procedure on the computer.
After the PC finds the iPhone and the pairing is established, you can access the Internet through the browser on your computer.
Despite the fact that iPhone users are more accustomed to distributing the Internet to their computer via Wi-Fi, a wired connection looks even preferable. It uses up battery power more slowly and provides faster connection speeds.
The method of connecting via Bluetooth among users is unpopular for a number of reasons: firstly, not all PCs have a Bluetooth module, and secondly, in order for pairing to become possible, the user will have to find and install the necessary drivers. Few people want to spend time on this, especially when you consider that Bluetooth has no advantages over, say, Wi-Fi.
How to find Google on iPhone?
Do the following: Open the Safari app on your iPhone or iPad. Go to www.google.com. If you see your profile picture in the upper right corner of the screen, then you are signed in.
How can I change account and mail on iPhone?
Setting up an email account manually
- Go to the “Settings” “Passwords and Accounts”.
- Click on “New Account”, “Other” and “New Account”.
- Enter your name, email address, password and account description.
- Click “Next”.
iPhone 11 Pro: How to Connect to Wifi To Go Online
How to go online on iPhone?
Go to “Settings” and select the “Cellular” section. Tap the slider to the right of the “Cellular Data” label. it will turn green, and the letter “E” or the word GPRS will appear to the right of your operator’s name. We just went online!
How to reinstall Google Play?
Make sure you have the latest version of Google Play Services
- On your Android device, open Settings.
- Select Apps & notifications Show all apps.
- Scroll down the list and select Google Play Services.
- Find and tap About App.
- Click Update or Install.
How to download Google to your phone?
- Open the Chrome page in the Play Store on your Android phone or tablet.
- Click Install.
- Click OK.
- Go to the home screen or to the All Apps section. To open Chrome, click on the icon.
There is network coverage, but the internet is not working
LTE connection errors most often come from the mobile operator. Typically, this problem occurs after a hard reset or factory reset. Even with good network coverage, unlimited internet may not function. Distinguishing this problem from others is easy. the cellular antenna is displayed in the status bar, but the icon disappears. The following actions will help to correct the situation:
- go to iPhone settings
- select the tab “Cellular”
- find the menu “Data Transfer”
- type APN and username, after specifying them with your mobile operator
However, before checking the settings, make sure that you have paid for the Internet, have network coverage, and the operator provides this service. Check the details of the tariffs for mobile communications. If your Internet often does not work correctly, discuss technical assistance with your cellular operator. Some users, in order to eliminate the problems that arise, change the mobile operator to a more suitable one.
If the 3G icon is missing
When the 3G icon is displayed in the status bar, but the browser does not load the pages, you should rule out the browser issue. The easiest way is to download all the proposed updates to the application, or uninstall and reinstall it. If you are using a standard browser, try the following steps:
- restart phone (Power Home)
- close the browser by double-clicking on the Home key and swiping up the application tab
Many iPhone owners have experienced poor page loading and following links after updating the operating system to version 9.3. Updating the iOS system to the latest version will help solve the problem.
The methods described above are relevant only if the problem is caused by a browser error, and there are no problems with LTE mobile communication on the part of the cellular operator. If the network icon or cellular data still disappears, you should look for other reasons.
Data network problems
You may not be connected to the internet if your cellular data network is off. Look in the parameters of your mobile phone. if it is disabled, then the icon disappears in the status bar. To connect the network, follow these steps:
- go to the connection settings menu
- make sure that in the items “Cellular data” and “Enable 3G” the slider is in the activated state
- turn on the transmission of cellular data if necessary
Even if the cellular connection was working properly, the coverage of the cellular network may be different, which is why the smartphone does not receive a signal everywhere. Operators cannot provide the same good cellular reception in different parts of the city. If the 3G icon changes to E or H, this is not considered a malfunction.
Internet does not work on iPhone
And get the best deals from trusted masters.
- Compare and choose the best conditions
- Feedback from interested professionals only
- Don’t waste time communicating with intermediaries
Apple produces high-end smartphones, but this does not exclude the problem that gadget users sometimes face. the Internet does not work on the iPhone. The problem arises with different mobile operators. Most often, incorrect settings are to blame, but there are also more serious reasons. Follow these simple instructions to understand why the internet sometimes works poorly on smartphones and how you can fix iPhone malfunctions on your own.
Why LTE stopped turning on
The reasons why the Internet does not work on the iPhone are different. The most common problems faced by iPhone users are:
- error in wireless network settings or 3G connection
- iOS system error
- iPhone hardware breakdown
- incorrect operation of the SIM card
In most cases (especially when it comes to software problems), you can fix the situation yourself.
How to connect modem mode
If the mobile Internet on your smartphone does not function in modem mode, or the device does not allow you to connect to the network in access point mode, make sure that the corresponding function is turned on. It’s easy to do:
- go to the settings menu
- select “Modem mode” or “Cellular data”. “Modem mode”
- move the slider to the on position
- check the settings and the password that your mobile phone will generate
If everything is in order, you should restart your phone. Typically, the modem mode function is then restored. It is recommended to perform the same actions if it is not possible to create access. Another way is to reset the settings to factory defaults and then enter all the parameters manually.