How to enable sound effects on Xiaomi

Table of Contents

Let’s see how to do it all

The above settings are relevant for wired and wireless headsets that have volume buttons and media playback control buttons.

  • First of all, go to the “Settings” menu. “Sounds and vibration” and in the tab “Ringtones and sounds of notifications” select “Ringtone”.
  • Listen to the previously set melody by simply clicking on it. Perhaps the melody begins with a quiet intro and you simply do not hear it during the call.
  • Perhaps the problem occurs only with incoming calls from specific subscribers. Then check similar signal settings for them. Read more about this in the article: How to change the ringtone for an individual subscriber.
  • If the delay appears only with an incoming call from an unknown subscriber, then this is normal. In the security settings of the Xiaomi smartphone, such subscribers are checked for possible negative qualities (spam detection algorithm). And this check just takes about 2-3 seconds. Here is the delay.

How to set up connected headphones

If you don’t know which type to choose or if it’s not on the list, try them all one by one. Alternatively, select “Regular Earbuds” for simple headphones and “Regular Vertical” for vacuum.

If you use high-quality headphones or a headset, then the sound quality will greatly depend on the above settings. The same applies to the use of Xiaomi branded headphones.

How to add your own track to Tik Tok

In past versions of TikTok, users could add their own sounds within the platform by pressing a few buttons. This function is currently unavailable, third-party software is required to add music.

Use Distrokid, Amuse or the InShot mobile app. Let’s take a closer look at the last option.

Install InShot on your mobile device.

Launch the app and click on Video.

Allow access to media and files on your phone.

Click on the Music tab at the bottom of the screen and select the Songs section and then My Music.

If there is no suitable music, click Open to go to the file system.

The selected track can be edited: trim, adjust the volume, add volume, boost and fade.

At the end, click Save and select the video quality.

You can upload the saved video to TikTok.

Sound features of Tik Tok

There are many sound effects available to users on the TikTok social network. Among them:

Proper use of music and sounds will make your video memorable and truly unique. This means that it is more likely to attract the attention of viewers and get more likes / Комментарии и мнения владельцев.

Tik Tok allows you not only to overlay a track already in the application on the video, but also upload your own music. This opportunity opens up new horizons for account promotion. For example, after adding the song Old Town Road to TikTok, singer Lil Nas X conquered the charts in America, Canada, the UK and other countries.

Adding songs to the social network library is beneficial not only for young musicians, but also for various companies. So, the Colgate brand uploaded its audio and launched a challenge with it. than 1.5 thousand videos were published on TikTok with a branded hashtag and a track that contains information about the artist. this is an effective free advertisement. Result: access to recommendations, new subscribers, sales growth and increased brand loyalty.

Requirements for adding your own tracks

The uploaded sound must not violate the rules of the application, as well as intellectual property rights. The punishment can be the removal of music and even the permanent blocking of the profile.

If you are not the author of the sound effect, make sure that its owner will not mind using it. The best solution in this case is to add audio to the finished clip using a third-party editor, and not upload the sound to the social network library.

How to create a sound effect video

Go to your TikTok page. Press. to add a new video.

Click the Music button at the top of the screen.

You will see a menu with popular tracks.

  • relaxation;
  • on the road;
  • gaming;
  • unusual;
  • club;
  • transition;
  • hardcore;
  • sadness;
  • dawn;
  • cuteness;
  • fashion and beauty;
  • shooting.

You can add the song you like to favorites to quickly find it and use it. To do this, click on the checkbox.

Select the track that suits the video. Click on it and wait for the download to finish.

After that, load a clip from the library or shoot a new one with a duration of 15/60 seconds.

For example, the video is loaded from the library: check the video and click Next.

If you want to change the background music, click on the Music section.

You can also apply a specific voice effect to the recording.

To do this, go to the Voice Effects section and select the desired.

If you want to record the original sound, click on the Voiceover item and hold down the big button.

You can choose the part of the video during which the soundtrack will play.

To do this, click on the Trim section and edit the entry.

To make the original or added sound quieter/louder, use the sliders in the Volume tab.

If necessary, add effects, filters, stickers, text. Enter hashtags and mentions, then publish the video.

Sound effects in Tik Tok: how to use it to the maximum

High quality original content is the key to the popularity of your Tik Tok account. In order for the video to collect a lot of views and be appreciated by the audience, you need to pay attention to every detail. At the same time, sound accompaniment often plays no less important role than the visual component.

In today’s article, you will learn how to use music from the app’s library and how to add your original track to TikTok.

Overlaying a popular sound from the Tik Tok library or adding your own music will make your video original. Usually such videos collect a lot of views / likes and go into recommendations. This makes it possible to increase the subscriber base, increase brand loyalty and increase sales.

Be sure to read ByteDance Ltd’s policies. and read the TikTok user agreement before putting the information in this article into practice. The information in this article may not comply with or conflict with ByteDance Ltd. policies. and/or the TikTok User Agreement.

The blog was created solely for informational purposes to promote the TikTok social network on a voluntary basis. The blog does not claim the rights of the official site and its other derivatives. All photo and video materials are taken from open sources on the Internet. In case of any claims, violations of copyright or property rights, please contact the site administration.

Sound effects and assistant in MIUI 12

Our smartphones allow us to listen to our favorite music, watch movies and series from the comfort of our bed, all with great sound.

However, developers are not asleep, and are constantly trying to integrate new features into MIUI to improve sound. Recently, MIUI 12 has acquired “Sound Assistant” and “Visual Sound Effects”. The first one helps us to control the media volume from multiple apps and the sound effects add beautiful effects when playing sound.

What features does Sound Assistant provide in MIUI 12? The functionality of this sound assistant consists of the following three functions:

  • Separate adjustment. separate sound adjustment for each application when playing simultaneously.
  • Multiple sound sources. allows you not to change the media volume for incoming notifications or when playing sound from another source.
  • Using a third party speaker. when a peripheral device (wired headset or Bluetooth device) is connected, ringtones and notification sounds will be played through the speaker of this device.

How to get to the “Sound Assistant” settings section in MIUI 12 ?

  • Open the settings of the smartphone and select the section “Sound and vibration”.
  • Next, we are interested in the subsection “Sound Assistant”.
  • Now you will see the “Sound Assistant” settings in MIUI 12.

How to Customize Visual Sound Effects in MIUI 12 ?

  • Open the settings of the smartphone and select the section “Sound and vibration”.
  • Next, we are interested in the subsection “Sound effects”.
  • Now we are interested in the line “Visual Effects”. By enabling which, we will get sound accompaniment by visual effects displayed on the lock screen.
  • But that’s not all, because the next section called “Visual Effect Styles” allows us to change the style of our effect. There are four options to choose from: smart, music, video and voice.
  • It is also possible to leave the screen on when visual effects are shown.

With this, perhaps a brief overview of the sound assistant and visual effects in MIUI 12 has come to an end.Attention: The sound assistant feature with visual effects is already available for some devices on MIUI 12 Global. Of course, over time, even more smartphones on the global MIUI 12 will receive this innovation. But this will take time.

Similar news:

Usually, smartphone manufacturers and software developers for them try to add all the intended functionality to the firmware.

Periodically, questions arise about such a simple Do Not Disturb mode. It would seem that there is something to ask, but there are little things because of which it may not work. Let’s see what we have in the settings in this mode and

Xiaomi has taken a huge leap with the MIUI 12 update and skin development is still ongoing as several Xiaomi devices have yet to receive the latest custom skin.

How to enable sound effects for a button in Android

I am using android:soundEffectsEnabled=”true” for button in layout.xml file.

In the settings, I have enabled sound effects and I can hear them in the default apps, but not in my app. Is there anything I should do other than this?

2 answers

Is there any easy way to put sound effects in the onClick method, when the user clicks on the sound effect, it makes a sound. 🙂 I looked into it but didn’t find anything useful. Thank you

I am developing a simple game in android. I want to add sound effects for each of the touch events. However, I added a background sound effect that works throughout the game. But how can you add a tiny touch sound effect to any character in the game. For the best.

Sound effects are enabled for the onClick method, but not for the onTouch method. What method did you use? if it was onTouch use a thing like this:

Similar questions:

I’m trying to play background music in my app and random sound effects when you kill an enemy and all that. All sound effects worked but then I started using the class.

I am making an opengl game for iPhone. And I’m going to start adding sound effects to the app. I wonder what structure is best suited for this purpose. Is the AV foundation my best.

I would like to ask if audio effects are supported in OpenCore. When we tried to install some sound effects and tried to play an audio file (only supported on opencore).

Is there any easy way to put sound effects in the onClick method, when the user clicks on the sound effect, it makes a sound. 🙂 I looked into it but didn’t find anything useful. Thank you

I am developing a simple game in android. I want to add sound effects for each of the touch events. However, I added a background sound effect that works throughout the game. But how.

This is my code right now. I am trying to add sound effects when a button is clicked. #import AudioToolbox/AudioToolbox.h. (void)threeBombExplosion NSString soundPath = [[NSBundle.

I’m trying to install treble and echo sound effects for my android audio player project but I don’t understand how. I already searched a lot on google and asked a question also related to.

I am trying to make an audio processing application. Is there a way to apply sound effects to an audio file using AVAudioEngine?

There is a karaoke app on the Play Store and App Store called Smule-Sing Karaoke. I used this app to sing a lot of songs. But now, as an android developer, I really.

See also  How to connect Xiaomi bracelet to iPhone

How do you program sound effects in kotlin android looked all over yt and there everything is in java

Xiaomi phones: how to set up sound effects

Sound is one of the most important aspects of any mobile phone, be it wireless or wired headphones. The best sound is the desire of most users. On this occasion, if you have a Xiaomi mobile, we will tell you how you can improve the sound with sound effects in MIUI.

The sound we perceive when we play something on our phone depends on an almost infinite number of factors, starting with the good health of our ears. But besides this, there are other parameters of our phone that are necessary for maximum sound quality.

Volume control

This section is one of the most interesting when it comes to setting up the sound of our Xiaomi. And the fact is that we do not usually find it in mobile phones from other manufacturers, in fact it is a setting that seems to be quite successful because it does not take into account only the type of sound or its quality, but also adds a volume factor so that listening sessions are maximized healthy without putting our ears at risk due to excessive volume.

To do this, we have a scenario in which we can adapt the volume to our century. in this configuration we can choose between three different age ranges. One of them is under 30 years old, another is between 30 and 60 years old, and finally over 60 years old. In this way, the sound of the phone and especially the volume will adapt to such an important factor as age, which greatly affects how well our ears can withstand excessive volume.

Igualada

This option is one of the best to make our phone sound as good as possible, or at least based on our sound tastes. Within this equalizer, we will be able to select ten music styles available so that the audio is adapted to these genres in order to get the best out of them and to fully enjoy the songs of each of the styles.

However, if we click on a preset, we can adjust the entire equalizer from left to right. In this way, we can adapt the sound in a more general way that we like how it sounds and which can be more easily adapted to all situations in which we are going to listen to sound on the phone.

How are these sound effects activated??

Well, it’s quite simple as we can manage it right from the settings of our Android phone. To do this, we must do the following:

  • Enter MIUI settings on your Xiaomi.
  • Click “Sound and Vibration”.
  • Swipe the screen until you get to “Sound Effects”.

Once inside, we have all the options that we will see below. This gives us the ability to comprehensively control everything related to the sound in the headphones. They will only show up as editable if we connect the headphones to our Xiaomi phone, no matter if they are wired or wireless. In the event that they are not connected, they will be displayed in gray and we will not be able to do anything with them.

If we plug in headphones, the menu text will turn black, and then it will be possible to edit all the options that we will see next, which can completely customize the sound experience in our Chinese mobile phone brand. These are nice changes, because not all manufacturers care so much that we can customize the sound of the terminal to our liking.

What affects the sound of our mobile phone?

As we say, there are many factors, but they mainly depend on the options offered by the smartphone manufacturer to be able to customize the sound to your liking. The fact that your mobile phone is better or worse in terms of sound can be mitigated with the help of such effects. And it is in MIUI 12 that we can access the various sound settings that the Chinese firm describes as Sound effects to be able to give personality to the sound of the terminal.

Well, these sound effects are especially recommended for use with headphones, which is obviously the point where we can perceive the sound quality better than in the case of speakers, which in many cases only transmit mono audio. Although in this case the sound is clearly perceived by individual channels. When we turn on the phone and do not adjust the sound at all, it is normal that we hear everything with a somewhat flat profile, which in many settings we identify as “flat” and which usually goes by default in the equalizers.

Trick of Xiaomi Phones No Body Knows | Headphones & Audio Effects enable any Music players in Redmi

In the case of Xiaomi mobiles, thanks to MIUI, we have a large number of options that can be adjusted so that the sound adapts to our needs and tastes. Even when we can check, we will be able to adjust the sound and volume according to our age. because, as you know, the older we get, the worse our hearing. These Xiaomi “sound effects” options offer us to adjust various settings.

Adjust the sound in your headphones.

Well, the Chinese firm has made sure that when we put on the headphones, we can fully enjoy the sound, with or without cables, and even more so if we have headphones of this brand. The first thing these settings offer us is precisely to adapt the sound to the type of headphones we use to wear, so in this option we can choose our headphones from the available list, obviously we are talking about Xiaomi.

In this way, the sound adapts to the technology of these headphones in order to get the most out of them. if we do not have Xiaomi headphones, nothing happens, we can adapt the sound in other different sections, but in this case it will not be necessary to configure the section to adapt the sound to the headphones.

Headphone control

In addition to the sound effects themselves, we have other options that will make it easier for us to play music or any other content. This is a series of settings that allow you to customize the operation of the control button on the headphones.

We can choose whether the button on the remote control of the headphones will control the volume level or music playback.

In addition, if our headphones have several physical buttons on the remote control, they can be configured individually, we will only have to press them on the headphones and then configure the actions to be performed on the phone.

Completely change effects with MIUI

Among the various configurations that we will find in every smartphone of the Chinese company thanks to the presence of MIUI, your level of customization. setting the effects that its terminals have. And best of all, we will teach you how to change both the one that handles the transitions on your smartphone and the sound.

And it may turn out that you have not yet been able to open it yourself, but the truth is that this functionality. this is what is “displayed” when someone swipes a touchscreen to navigate from one start page to another within the interface. from a mobile device. For this reason, the transition effect. it is a fact of how we can move from one panel to another in our android phone. Therefore, if you are already tired, you must follow the following steps to change them:

  • To access the smartphone screen settings, long press on the home panel.
  • Then click on the “Settings” option.
  • Enter the Transition Effects section and choose from the options: Slide, Fade, Tilt, Page, Cascade, Rotate and Cube.
  • Finally, click Done to save your choice.

If you want to completely change these sound effects, we will have to go to the settings menu itself, which is installed by default in the mobile phones of the Chinese company. And the fact is that over time we will get more and more tired of the same effects as our smartphone. Hence, these will be the steps you should take into account in order to have access to them and modify them according to your needs:

  • Enter MIUI settings on your Xiaomi phone.
  • Click the “Sound and Vibration” section.
  • Swipe the screen until you reach the Sound Effects option.

When we are in this section, we will find all the possibilities that our terminal will have : Adjusts the sound in the headphones, equalizer, volume control. We will even have more control over the headphones if we are one of those users who spend the day in headphones with: remote control buttons and assignment buttons.

Make Xiaomi animation faster

Although these are the only features that MIUI will put at our fingertips. Another characteristic that we have to evaluate if we want to change or not increase the setting of our smartphone from an Asian firm will be the fact of speeding up the animation of the system itself. And it is in this simple configuration that we will show you that we will be able to adjust the speed of the various transitions performed by the animation of our mobile device.

But why are we going to change this? This configuration will depend more on the type of user and the requirements you need in terms of your smartphone’s performance. Therefore, we leave you with the necessary steps so that you can speed up the MIUI animations or even turn them off if you are bored with them.

Also, one of the key points of this last alternative is to reduce battery consumption, since the fact that the mobile device has to do more to animate increases the power consumption. Especially for those smartphones that do not have a powerful processor and large battery capacity.

To do this, we will have to follow the following steps from our Xiaomi device:

  • Access your phone’s settings.
  • Click the Advanced Settings section.
  • Enter the Accessibility section.
  • Enable or disable animation removal.

This way you will completely say goodbye to animations, but if in your case you just want them to run faster, you will have to follow the following process:

  • Go to settings.
  • Click Advanced Settings.
  • Enter Developer Options.
  • Inside you will have to look for Animation Level sections.

Once we’ve reached this point, we’ll need to access the three animation sections we’ll find: window, transitions, and duration. Once inside each parameter, we will have to select the desired value, the lower it is, the faster we will make the system run smoother and faster than before. And besides, we will transition between different menus faster. As well as the speed when opening and closing applications increases.

How to set up effects and animations on Xiaomi mobile devices

Undoubtedly one of the strengths of any Android mobile device. this is his customization. And even depending on the level of software you have, they will offer us more options. This is the case of Xiaomi phones. which even offer us the possibility to change both their effects and the animation that we constantly see on the smartphone, according to our shape.

Therefore, it will always be useful to know each of the alternatives that we can find in the mobile phones of the Chinese firm with MIUI. In addition, it does not matter which smartphone you have: low, medium or high, everything will depend on the version of the software layer itself. Thus, the more recent version of the software is installed on your mobile device, the more features you will find. So pay attention to finding each of the tools you have on hand.

Say goodbye to the old start of your mobile phone

Another strong point achieved by the software level Xiaomi phones with MIUI 12 is that we can change the loading effect of our terminal when it is turned on. That is, we will make the theme that will appear every time you turn on the mobile device completely different.

To be able to change this option in the terminal of the Asian firm, the first thing you should know is that you will need MIUI 12. Then we will only have to download a theme that has some type of motion, whatever. This. Thus, we can further customize our terminal. To do this, follow these steps:

How to set up the equalizer?

To properly set the equalizer, you need to use ready-made genre presets or manually adjust the equalizer ️.

Setting the equalizer for headphones or setting the sound in headphones (in Bluetooth wireless headphones), differs from the equalizer setting by genre presets. But first things first.

All modern players for the phone, PC and TV have a built-in software equalizer. In such equalizers, there are almost always ready-made settings (presets), for example, for a certain genre of music: for rock, rap and other music. What is the best way to set the equalizer settings for the best sound? The best sound can be obtained using the general instructions for setting the equalizer and how to use it, and if the sound is still not satisfactory, turn the equalizer settings manually.

Best Wireless Headphones (2021):

What is equalizer ❔ Brief and clear

An equalizer is a device or program that allows you to adjust the volume of individual zones of the frequency range. To be precise, the amplitude of the signal is regulated, but this is the volume. That is, the equalizer allows you to emphasize or, conversely, mute certain frequency ranges in the audible spectrum, changing the final frequency response (frequency response).

Physical equalizers (devices) are used in the recording process. At this or that stage of recording and mixing music, the participation of an equalizer is almost inevitable. Sometimes you need to emphasize or mask the features of the vocalist’s voice, give a certain color to the instrument, and so on.

See also  I have lost sound on my iPhone

Software equalizers are most often used already while listening to music. Yes, the studios also have them, but they are rarely the main ones. With such a program, you can correct the flaws in the sound of your headphones or speakers. But, of course, many people use them to get some special color of music that they like.

Do not forget that using the equalizer changes the sound towards unnaturalness. And the more actively it gets out, the more distortion appears in the sound: the voices become unnatural, the instruments become synthetic, the stage narrows or is completely distorted.

Personally, I don’t use equalizers. At least not now. Everyone started with bass plugs and bass level twisting. It’s better to get high-quality headphones and source, and listen to music as it was intended, than to add some kind of gag.

However, this is true in many respects for quality recordings and source files. That is, if the music is recorded in a good studio with the participation of professional musicians and sound engineers, then it is better not to touch the sliders (frequency) of the equalizer. But, if the music itself is originally synthetic, recorded in a semi-home studio (or something like that), then it can be corrected.

It is more logical to use an equalizer to correct jambs of recording, headphones, source, and so on. When these problems are clearly audible. But I don’t recommend just piling on bass or cutting high without an audible reason.

Parametric equalizer

This spoils not only the music itself, but also its perception in the long run: well-mixed and recorded compositions may start to sound wrong. And that’s bad taste. Of course, the perception of music is a subjective matter and it is impossible to establish clear rules: it is right to listen this way, otherwise it is heresy.

What are equalizers?

Equalizers are divided into 2 main types: graphic and parametric. This applies to both physical and software solutions. A digital equalizer (of any type) usually has more tuning options, processing is carried out by mathematically correct methods. Analog equalizers work differently: they bring quite a lot of changes to the music, but, as many believe, they can give a special liveliness.

We will not dwell on analog physical equalizers in detail. They are mostly used in studios or some audiophiles’ systems. We will consider digital solutions.

Graphic digital equalizer

Graphic equalizer. the most common type, is a set of bands (frequencies) with the ability to adjust in and a few dB. Setting up the graphic equalizer is quite simple: just select which frequencies you want to adjust and move the corresponding sliders.

The parametric equalizer is a tool for finer tuning. Here it is no longer just possible to increase or decrease the volume in certain segments of the range, but you can adjust some parameters in more detail. Setting up a parametric equalizer comes down to choosing a specific frequency, detuning the quality factor (the zone around this frequency that will be adjusted) and, in fact, adjusting the volume of the selected range.

Parametric digital equalizer

What are equalizer bands? How many should there be?

Bands are usually characteristic of graphic equalizers (there are more knobs or other visual elements on parametric ones) and display a fixed frequency, the adjustment of which (more precisely, the range around) is made. Accordingly, the more bands, the more accurately you can make adjustments.

For example, many professional graphic equalizers (including analog ones) have 31 bands.

Setting up a 13 band EQ is not much different than a 10 band EQ. Just 3 lanes more. But who said that they are needed? Sometimes a large number of bands, on the contrary, confuses. By the time you bring out that recipe for the desired sound A, it will turn out that in the end you adjusted only 4-5 bands. Therefore, it is impossible to say unequivocally that the equalizer should have 6, 10, 13, 31 bands, and so on. It all depends on the specific genre or composition for which the sound is adjusted.

As mentioned above, it makes the most sense to use an equalizer when listening to (rather than creating) music. on simple popular synthetic genres. And there most often you don’t need a lot of bands. 5-6 will be enough. And for someone, a couple is enough, if only they were on the bass (raise) and on the treble (lower).

How to set up the equalizer ️ universal instruction

Adjusting the sound using the equalizer is now possible on any device, be it a PC, laptop, phone, player, TV, and so on.

How to set up the equalizer is a general instruction for all devices:

MIUI 12 Sound Effects & Assistant Review | Download Latest MIUI 12 Beta

  • We go into the general settings sound settings equalizer settings (all options where to look for the equalizer).
  • Turn on the equalizer. Usually it is turned off or all the sliders are in the middle.
  • In the equalizer parameters, select a ready-made preset for your genre of music (rock, pop, jazz, hip-hop, electronic). Setting the equalizer for certain headphones is done like this.
  • Manually tighten the frequency regulators. If the finished peseta isn’t good enough for you.
  • Save the created setting.

Usually the equalizer is built into a specific software player. Also, the audio equalizer can be system or as a separate program (application).

How to set up effects and animations on Xiaomi mobile devices

Undoubtedly one of the strengths we find in any Android mobile device. these are their settings. And even depending on the level of software you have, they will offer us more options. This is a Xiaomi mobile case. which even offer us options to allow us to change both their effects and the animation that we constantly see on the smartphone, according to our shape.

For this reason, it will always be useful to know each of the alternatives that we can find in the mobile phones of the Chinese firm with MIUI. In addition, it does not matter which smartphone you have: low, medium or high, everything will depend on the version of the software layer itself. Therefore, the more the software version on your mobile device is updated, the more features you will discover. So, pay attention to find each of the tools you have on hand.

Completely change effects with MIUI

Among the various configurations that we will find in every smartphone of the Chinese company thanks to the presence of MIUI, its level of customization is the adjustment of the effects that its terminals have. And, best of all, within the validity period, we will teach you how to change both the one that processes the transitions on your smartphone and the sound.

And maybe you haven’t been able to discover yet, but the truth is that this functionality. this is what is “displayed” when someone swipes the touchscreen to move from one start page to another in the interface. mobile device. For this reason, the transition effect. it’s a fact of how we can navigate between one panel on our android phone. Therefore, if you are already tired, you will need to follow the following steps to change them:

  • To access the smartphone screen settings, long press on the home panel.
  • Then click on the “Settings” option.
  • Enter the Transition Effects section and select one of the options: Slide, Fade, Skew, Page, Cascade, Rotate and Cube.
  • Finally, click Done to save your choice.
  • Enter MIUI settings on your Xiaomi phone.
  • Click the “Sound and Vibration” section.
  • Swipe the screen until you reach the Sound Effects option.

When we find ourselves in this section, we will find all the possibilities that our terminal will have: Headphone volume control, equalizer, volume control. We will even have more control over the headphones if we are one of those users who spend the day wearing helmets: remote control buttons and destination buttons.

Make Xiaomi animation faster

Although these are the only features that MIUI will put at our fingertips. Another feature that we have to evaluate if we want to change to increase the customization of our smartphone from the Asian firm will be the fact of speeding up the animation of the system itself. And it is in this simple configuration that we will show you that we will be able to adjust the speed of the various transitions performed by the animation of our mobile device.

But why are we going to change this? This setting will depend more on the type of user and the requirements you need in terms of your smartphone’s performance. Therefore, we will leave you the necessary steps so that you can speed up the MIUI animation. or even turn them off if you’re tired of them.

In addition, one of the key points of this last alternative is to reduce battery consumption, since the fact that the mobile device has to do more due to animation increases power consumption. Especially for those smartphones that do not have a powerful processor and a large capacity battery.

To do this, we will have to follow the following steps from our Xiaomi device:

  • Enter your phone settings.
  • Click the Advanced Settings section.
  • Enter the “Accessibility” section “Vision”.
  • Enable or disable animation removal.
  • Go to settings.
  • Click Advanced Settings.
  • Enter Developer Options.
  • Inside you will have to look for the Section Animation Level.

Once we’ve reached this point, we’ll need to access the three animation sections we’ll find: window, transitions, and duration. Once inside each parameter, we will have to select the desired value, the lower it is, the faster we will make the system run smoother and faster than before. And also make the transitions between different menus faster. as well as the speed of opening and closing applications increases.

To open the sound control panel, right-click the speaker icon on the taskbar and select Sounds. You can also just go to Control Panel Hardware and Sound Sound.

On the Sounds tab, click the Sound Scheme box and select Mute to turn off the sound effects completely. If you also want to turn off the sound that appears when you sign in to Windows, uncheck “Play a sound when Windows starts”.

You can also disable sound effects for certain events. For example, you can turn off the “Notification” sound effects while leaving the “Battery Critical Alarm” sound effects on. To do this, select a sound effect from the list, click the “Sound” field at the bottom of the window, and click “(None)”.

Click OK to save your changes when you’re done. You can always go back here and set the sound scheme back to “Windows Default” to restore the default sound effects.

How to turn off the click sound in Windows Explorer

If you are using Windows 7, you may be particularly annoyed by the sound effect that plays when you navigate to a new folder in Windows Explorer. This particular sound effect is disabled by default in Windows 10 for good reason.

To turn off just this sound, scroll down the list and select the Start Navigation sound effect. Click on the “Sounds” field at the bottom of the window and select “(None)”. Click “OK” to save changes.

How to set up sound effects

If you like sounds, you can customize them here. Select an event and use the Sounds field to select a sound file for it. You can click “Test” to listen to a preview of various sound effects here.

To use your own sound file, click the Browse button. Your custom sound effects file must be in.wav format.

To save your settings as a sound scheme, click the Save As button at the top of the window and enter a name. You can then select your saved sound scheme from the list here in the future.

Why do the sounds keep turning on?

You may find that sound effects are automatically enabled again when you customize your desktop. This occurs when changing the desktop theme using the old Control Panel interface in Windows 7 or the new Settings interface in Windows 10. This is because desktop themes can include sound schemes as well as desktop background images, colors, and mouse cursor themes. However, most themes will just state the “Windows Default” sound scheme, turn it back on if you’ve turned it off.

After switching to a new theme, you will have to go back to the Sounds window to turn off the sound effects if you don’t want to hear them.

Changing your system’s sound settings will disable them in some, but not all, desktop applications. If an app continues to play sound effects even after you have disabled them in the Sounds control panel, you need to disable sound effects in that app’s settings window.

How to change or disable sound effects in Windows 10

Along with all the personalization options, Windows 10 includes sound effects for system events and apps, such as connecting and disconnecting peripherals, calendar notifications, battery notifications, errors, and more.

While they can be helpful, listening to the same sounds every day can get annoying. However, you don’t need to mute your system if you don’t like them, as it is possible to customize each sound or disable the sound with just a few clicks.

In this Windows 10 guide, we’ll walk you through the simple steps to fully customize or disable sound effects on your computer.

How to customize Windows 10 sound effects

Advice. You can also access these settings by right-clicking the speaker icon in the notification area and selecting Sounds.

  • Disable sound effects. From the Sound Scheme drop-down menu, select Mute.
  • Enable sound effects. From the Sound Scheme drop-down menu, select Default.

After you complete these steps, Windows 10 will use the new custom configuration. However, be aware that when applying Windows themes, some of them may include custom sounds that can override your settings (even enable sounds if you’ve previously disabled them), and these steps can also come in handy if you don’t like the new sounds and want to return to default settings.

See also  How to remove the sound of keystrokes on the phone

If you’re using custom sounds for a number of events, it’s also a good idea to hit the Save As button. to create a custom sound scheme in case the settings ever change and you want to re-apply your preferred configuration.

Sounds for Windows and app events have been around for years, and if you didn’t know or just forgot about them, this guide will help you personalize sound effects on your Windows 10 device.

Although we focused this guide on Windows 10, you can also refer to these instructions (but using the Control Panel) to change the sound effects in Windows 8.1 and Windows 7.

How to set ringtone in MIUI 12

To set up a ringtone in MIUI 12, you need to enter the “Sound and vibration” menu. Next, you need to select the “Melody” tile. Here you will see 3 ready-made sets of sounds: Mi remix, Mi jazz and Mi electronic, as well as the ability to choose your own ringtone by clicking on the “All melodies” tile. When you select the “All melodies” item, we will get to the menu, which displays all the standard melodies that you can listen to and choose your favorite. Or, if you want to set your favorite song as a ringtone, you must first download it to the phone’s memory, and then click on the “Select a ringtone on the device” line. Now click on “Music”. You will see a list of all the songs found in the memory of Xiaomi, find the one you want to make a ringtone, select it and click on “OK”. Return

Ringtone for an individual contact in MIUI 12

Also in MIUI 12 it is possible to assign a ringtone to an individual contact, it will sound only when this particular subscriber calls you on the phone.

To do this, enter the phone book, find the desired entry.

In the “” section, find the “Default ringtone” item. Then everything is the same as in the previous paragraph, either select one of the standard melodies, or assign some song from the smartphone’s memory.

How to set sound for SMS in MIUI 12

I encountered the fact that many users cannot assign a sound for incoming SMS messages in MIUI 12, but through no fault of their own, but because, for a reason unknown to me, not all firmware have this feature.

I’m sure this is a simple oversight, and in one of the future updates this feature should be returned, but for now I’ll show you how to do it on a phone with a similar feature.

Go back to the “Sound and Vibration” menu. But this time we select the “Notifications” item. Scroll to the very bottom of the page and see the lonely “Messages” menu. By clicking on it, you will be able to select a specific preloaded effect, either one of two sets, or even a song if you want by clicking on the line “Select a melody on the device”.

Sound settings in MIUI 12 on Xiaomi (Redmi): ringtone, SMS, notification and volume

With the advent of the MIUI 12 shell on smartphones, we received a completely redesigned interface for setting sound and sound effects on Xiaomi (Redmi).

One of the main innovations was ready-made sets of sounds, united by some theme, which change dynamically depending on the current time.

Mi Sound Enhancer | How To Enable Sound Enhancer In Any Xiaomi Device | Best Sound Quality Setting

For example, if you select the Nature-Birds ready-made set, during the day notifications from applications will be accompanied by the sounds of different birds typical for this time of the day.

This approach does not require any outstanding technical achievements or tricks, however, it significantly diversifies the experience of interacting with the phone, and allows you to extend the pleasure of using sound presets alone. Still, when the sound changes automatically during the day, it gets bored much more slowly than if the same effect was played all the time.

How to choose notification sound from apps in MIUI 12

In the settings of your smartphone, find the line “Sound and vibration”. Next, we are interested in the “Notifications” tile. You will see 5 options for sound sets that Xiaomi designers have prepared for you, listen to them, perhaps they will be pleasant to you. For example, the “Birds” and “Drops” sets change depending on the time of day, I personally chose the birds, I really like the daytime sound effect of the incoming notification. However, if you are not satisfied with the prepared thematic set, click on “All melodies”. Here it is possible to select a specific effect, or even a song by clicking on “Select a melody on the device”.

Silent Mode

First, there are two ways to quickly activate Silent mode:

  • Volume key on the side of the case. Turn down the volume or click on the bell icon to turn off all sounds altogether.
  • Quick access menu. Swipe down twice on the screen to bring up the menu. Select the bell ringtones and messages will be turned off, vibration will remain.

Setting sound and vibration in Xiaomi

Each smartphone user customizes the sound, ringtones, notifications and vibration on the device for themselves. For someone, you need maximum sound and sound confirmation of each action on the phone, for another, maximum secrecy, silence, so as not to be distracted once again.

Let’s deal with all the sound and vibration settings in Xiaomi smartphones.

General settings

Let’s go to Settings Sound and vibration. This section contains everything related to the sound on your device.

  • Silent/do not disturb. Activate to turn off ringtones, notifications, and vibration. There are 3 operating modes available, and they can be turned on according to the schedule:
  • Disabled all sounds enabled.
  • Mute disabled only ringtones and notification sounds.
  • Do not disturb all sounds and vibrations are disabled except for the alarm clock.
  • Adjust the volume of ringtone, alarm and music on your phone. Installed separately.

Music and notification sounds settings:

  • Ringtone set the melody for an incoming call. About 30 standard melodies are available, but you can also set your own mp3 music to the ringtone (option Select a melody on the device).
  • Incoming SMS sound of an incoming message. Choose a standard melody or any of your own. Can you turn off the sound altogether?
  • Calendar sound setting when some event/reminder in the calendar is triggered. A choice of melody is available among standard and custom ones. You can turn off the sound.
  • Notification notification sound. Choose among standard sounds and your own, downloaded to your phone. You can turn off the sound.
  • Vibration on call. It helps a lot in noisy places on the street or in the subway, when you can’t even hear a loud bell.
  • Vibration in silent mode. Leave vibration if you turn off the sound on your phone so you don’t miss important calls and messages.
  • Vibration feedback vibration for each of your clicks on the phone screen. You can select weak, medium or strong vibration feedback. The elderly are very fond of using this feature.

Setting up system notifications:

  • Sound when dialing a beep when you dial someone’s number.
  • The sound of touching the screen each touch on the display is accompanied by a sound.
  • It is better to turn off the sound of the screen lock so that it is not distracting.
  • Screenshot sound when you take a screenshot, there will be a sound signal.
  • The sound of deleting an object when deleting an icon in the trash will sound.

In general, I recommend turning on system sounds, tk. they seem to confirm your actions, that you actually deleted, took a screenshot or dialed the number correctly (for the visually impaired).

Let’s summarize. We have sorted out all the sound settings for calls, SMS and notifications. Mute the sound at night (the alarm will not turn off), while studying or for an important meeting.

Online audio editor, or how to cut, merge, apply effects, etc. for free. to sound files

If you record podcasts, information courses, or just like to send funny audio recordings to your friends, sooner or later you will need an editor program. But which one to choose?

Of course, the ideal choice is Audacity, Cubase, Adobe Audition, Apple Logic or Avid Pro Tools. But they need to be installed on the computer. If you don’t have such an opportunity (or desire to install another “program”), pay attention to any of the online services below.

Sodaphonic

Beautiful Audio Editor is a sound editor with powerful and, for many, redundant functionality. If you need to make only minimal edits, and do everything quickly and easily, take a look at Sodaphonic.

Immediately after importing your file in MP3 or OGG format, you can immediately edit it: trim, cut out an unnecessary fragment, etc. Also available is the ability to increase or decrease the volume, reduce the volume to zero at the desired location, and play your file in reverse. Supports uploading files from Dropbox and direct audio recording through the interface on the site.

Of course, Sodaphonic does not replace a specialized audio editor. But what he can do, he does quickly. Plus, he has more than enough tools for the average user.

Key features of Sodaphonic:

  • Ability to crop, cut unnecessary fragments, copy and paste audio clips;
  • Import files from Dropbox;
  • Decay and gradual increase in sound;
  • Audio recording;
  • Saving MP3 or WAV files.

Beautiful Audio Editor

The functionality is in order here. the service supports more than a dozen different audio formats up to 1 hour long. The result can be saved to Google Drive. Beautiful Audio Editor works great in popular Chrome and Firefox browsers.

The interface of the program resembles the Audacity control panel. The Beautiful Audio Editor also offers toolbars with toggles and export options (located at the top of the screen). But most of the screen is occupied not by them, but by your track. Supports multi-editing of multiple recordings (multitrack).

In addition to basic things like moving, duplicating, splitting and speeding up audio, Beautiful Audio Editor also has tools such as signal amplification (gain), panning (pan), dynamic processing (dynamic compression), reverb (reverb) and low / high pass filters. Recording directly from the interface is also available.

In addition, the Beautiful Audio Editor has a rare feature for such applications. the envelope (envelope). It allows you to adjust the sound levels in the tracks at different time intervals. The range is from complete silence to “6 decibels more than now.” As a result, you can gradually increase or decrease the sound, and as a result achieve a greater effect on the listener.

Key features of Beautiful Audio Editor:

  • Handles multiple tracks (mixing);
  • Ability to control the volume in each track;
  • Over a dozen audio effects;
  • Speed ​​up and slow down the track;
  • Creating envelopes.

Bear Audio Tool

This is an HTML5 editor. It edits files right on your device so you don’t have to upload files anywhere.

Bear Audio Tool has everything you need for basic audio processing. With this editor, you can trim a track or cut out an unnecessary fragment, “rebuild” a clip, apply a number of effects such as changing the pitch (pitch), muting the sound (mute), smoothly reducing or increasing the sound in certain sections of the audio track.

Bear Audio Tool also stands out from its competitors in that it has a whole lot of options for importing audio files.

In addition, the service offers the ability to import an audio file from a URL or from a YouTube video.

Finally, every user of Bear Audio Tool has access to a whole library of music and sound effects. They are not copyrighted. so feel free to use them for your projects.

Bear Audio Tool key features:

  • Options for importing online and offline;
  • Built-in music library;
  • Functions “forward” and “backward” (Undo and redo);
  • Import sound from YouTube;
  • Format conversion.

Hya wave

This editor has a specialization. Hya-Wave is specially “sharpened” for working with audio samples (ringtones). The interface is minimalistic and intuitive. There are also standard things like cropping, the ability to cut an unnecessary fragment, paste, and a set of simple keyboard shortcuts. You can import audio files by adding them locally or recording directly from the browser.

Hya-Wave is strong in its simplicity. it’s very easy to apply, remove and customize audio filters. There are 18 of them here at once, among them. delay, normalization, etc.

When you select an effect, a “speedometer” appears at the bottom of the screen. With it, you can fine-tune a parameter and apply it anywhere on your track. Before you finally apply the filter, you can make a preliminary audition and, if necessary, make additional edits.

Key features of Hya-Wave:

  • Library of 18 filters and effects;
  • Preliminary listening before the final application of the filter;
  • Customization with an audio filter;
  • Publication of the result directly via URL and social networks;
  • Minimalistic design.

TwistedWave Online

This is perhaps the most famous software in our ranking. Which is not surprising, because. TwistedWave Online is the online version of the popular paid app for Mac and iOS.

TwistedWave Online is free, but includes tools from the paid version for Apple computers. These include both VST effects and basic things like amplification, normalization, working with pitch, sound velocity, and changing the sample rate.

The service also supports recording uncompressed audio (or compressed to MP3 format).

After all the edits are made, you can upload the file to SoundCloud or Google Drive. In addition, your projects are automatically saved to the cloud of the service itself, so that they can be accessed from anywhere in the world with an Internet connection.

As mentioned, TwistedWave Online is free to use. Of course, it was not without limitations. recordings with a duration of no more than five minutes are accepted for work, and your files are imported only in mono. To remove these restrictions, you will need to purchase a paid subscription.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE